I'm comparing a RHEL4 samba server's config to a new RHEL install with a default samba config. On the old one I see that there is a line saying
invalid users = root bin daemon adm sync shutdown halt mail news operator
On the new default install I don't even see where it mentions the invalid users option in the notes. Does it do that by default now or something?
I would like to know how can I share folder with samba that samba does not show it to those users that have no access to it?
View 4 Replies View RelatedI'm not sure if this is even possible and I've tired searching, but I can't seem to figure it out. I have a few shares setup in Samba. I want them to prompt for a username and password. If an invalid user/pass is entered I want the user to be authenticated as a guest.
View 6 Replies View RelatedI have a Samba File Server that can authenticate users in my Windows AD to log into the server. Anyways, I have a good amount of Windows Admins on staff but our org wants to cut budget so our first "slash" as it were is cutting down the actual Windows based File Servers.So my question is, now that I have this test server up and authenticating for logins using Windbind....is there a way I can get system-config-samba to "see" winbind users and groups so that file servers can still be "point and click" for my Windows Admins?
View 3 Replies View RelatedI have an ubuntu 11,04 samba domain server, I want to also configure this machine to work as a dhcp server, however this have give me some issues with te windows 7 workstations, my guest is that it have something to do with the iptables because those station do join the samba domain went both server and workstation are conected to a router.
This is the script I use at boot
Code:
#FOR SHARED INTERNET
/sbin/iptables -P FORWARD ACCEPT
/sbin/iptables --table nat -A POSTROUTING -o eth2 -j MASQUERADE
[code]....
I haven't test it with windows xp station but I have use the same code in the past with no problems, and since this is my first time joining windows 7 station i belive there must be some other port that need fowarding.
I've got a small issue that when a Windows user creates a new folder through Windows Explorer (from the menu or by right clicking) the new folder is only accessible to that particular user. Example: user SABKAR (member of the HR group) creates a new folder called MarcTestMenu in a shared Samba directory through Windows Explorer:
[Code]....
At this point user MORAMY cannot copy a file or open the directory MarcTestMenu. MORAMY gets a 'not accessible' error message in Windows. If I su to the Samba box and issue this command:
[Code]...
how I can get the correct default permissions when users create directories through Windows?
Is there any way to limit x number of samba users by samba ? Say if there are already 5 samba users using the share, I would like to restrict any futher samba requests.. How do i do that ?
View 1 Replies View RelatedI'm running Ubuntu Server 11.04 with OpenSSH, trying to create an ssh tunnel (for web traffic) to it from my (also Ubuntu) laptop. This is the command I'm using to create the tunnel:
Code: ssh -ND localhost:8080 george@192.168.1.20 I had it all working on a virtual machine.. which was deleted What settings/lines do I need to change/add from the default OpenSSH config files to get tunnelling to work? I've Googled and AllowTcpForwarding is set to yes, as is X11Forwarding.. but it still doesn't work. Chrome can connect to the server, but says the connection was closed before any data was sent.
I'm running ubuntu 9.04 and trying to pull over some files via the GUI from a XP box over locally. I'm getting this error:
"error while copying file into /volcano/tunes invalid argument" (under show more details)
If I just copy over a mp3 file it works fine but the when I copy the entire directory I get this error.
I have two linux machines (machine1(rhel client) and machine2 (rhel server)). I am able to login the machine2 from machine1 but I am unable to ping machine1 from machine2. Firewall is stopped in both machine.
View 6 Replies View RelatedIve followed this:
[URL]
SWAT service is running
Firewall is disabled
disable is saved in this file.
Doesnt work. http://localhost:901
What to do to diagnose this? What to check?
I am trying install rhel 6 on my rhel 5. I have downloaded rhel6.0-20100715.2-server-i386-dvd1.iso (from redhat ftp site) and burned into dvd. After rebooting I pressed F12 and chose cd installation.
I get the following message on my screen.
"ISOLINUX 3.86 2010-04-01 ETCO Copyright (C) 1994-2010 H.Peter Anvin et al
No DEFAULT or UI configuration directive found!
boot: "
I work as an system administrator for AIX and Linux servers. We have an FTP server running in Linux which has shared folders to Windows domain using Samba. The new requirement is to map users created to Linux machine to Windows users in such a way that, when a user logins into Windows machine with an ID say "X123" in domain "TEST", his access control to the samba shares should reflect based on the same user ID created in Linux machine.(FYI. Both the Windows and LINUX machines are in same network and domain). Please let me know the step by step procedure to configure Linux machine (smb.conf entries or any new file to be created for user mapping) to identify Windows user Login and provide access restrictions accordingly.
View 1 Replies View Relatedscript which can add a secondary group to all existing users except system users in linux.
View 5 Replies View RelatedAt my office we are having a samba sever, staff will access their respective folder from their Windows XP systems. I wish to track all user access activity like file creation, modification, deletion and etc. I tried smbstatus -v, from the output I am not able to guess what the user done. I am giving some of the results I get please help me or you can suggest best way to get access log.
Samba version 3.0.25b-0.el5.4
PID Username Group Machine
14721 govind govind tsl-019 (10.0.2.64)
4832 chandra chandra trivent-9b92c9c (10.0.2.106)
Service pid machine Connected at
[Code]...
All of sudden a working SAMBA server not allowing to login and deny permission for users to access it shares. When I check I checked the server directory rights are same, find no changes. and smb.conf is also same. when I checked closely I found the following error.
1. smbd.log show the following messages
[2011/06/14 16:07:15, 0] lib/util_sock.c:get_peer_addr(1232)
getpeername failed. Error was Transport endpoint is not connected
[2011/06/14 16:07:15, 0] lib/util_sock.c:read_data(540)
read_data: read failure for 4 bytes to client 0.0.0.0. Error = Connection reset by peer
[2011/06/14 16:07:36, 0] lib/util_sock.c:get_peer_addr(1232)
getpeername failed. Error was Transport endpoint is not connected
[2011/06/14 16:07:36, 0] lib/util_sock.c:get_peer_addr(1232)
[Code]...
If I want to add Windows & Mac users as Samba users, must I first add them all as Ubuntu users? If so, since none of the other users will actually be working on the Ubuntu Server, how do I disable the other non-admin users on the Ubuntu Server login screen. I am using Webmin to administer some server settings, and command line for others.
View 3 Replies View RelatedI think the following code is trying to change the settings inside the file:
CISum=077
sed -e "s/002/$CISum/" -e "s/022/$CISum/" /etc/bashrc-preCIS > /etc/bashrc
sed -e "s/002/$CISum/" -e "s/022/$CISum/" /etc/csh.cshrc-preCIS > /etc/csh.cshrc
[code].....
But, what if i only want to check what the settings are inside the file, but does not want any changes to the file.
i have 3 groups on a samba server with about 30 user per group.I would like to know how to delete all the user in a group before adding new users.
View 1 Replies View RelatedI have configured ldap on Debian5 and samba on another machine, all servers are running ok, but when i try to add users, it gives me an errror that "unknown user"
View 4 Replies View RelatedI had a RAID controller in a system that would not load Virtuozzo. So I deleted the array created by the 3Ware 9550SX controller before removing it and one drive from the CentOS 4.8 server. Even though I deleted the array when the server boots it shows an error:
ERROR : asr : invalid RAID config table
How can I clear and remove the table without having to reload the OS? Can I? Di I need to run the Seagate Tools and reset the drive?
I am building a livecd, the live user created at boot time is a member of the audio group set in /etc/group. This way works for the livecd but when installed a user must manually add himself to the audio group. How can I set new users to automatically become a member of the audio group? In /etc/default/useradd I can set only one group.
View 4 Replies View RelatedI need to add linux and samba users using a shell script, it falls over because you are prompted to set a password.
I had a similar problem when installing the samba package using a script because it asks for confirmation after the command, I got round it using --force-yes -y as below.
apt-get install samba smbfs swat --force-yes -y
I suspect and hope you can do something along those lines when creating a linux user and a samba user, something like
smbpasswd �a username ?
want to made 2 users in samba by which windows machine we access share, say user1 has read,execute permission, user2 has read write delete update full permission. we have done user1 configuration as premia user. we need your guideline for user2
we change the smb.conf file
# less /etc/samba/smb.conf
[global]
[code]...
How do I enable Adobe Reader as the default reader in Linux automatically whenever I create a new user account? I don't want to find myself doing it for every user I create, It's too tedious if there are too many users.
View 2 Replies View RelatedIn other Linux distros I've used, new users are assigned to their own group (i.e. user 'joe', group 'joe') by default. To my surprise, when I create new users with my openSUSE 11.4, they are all assigned to the 'users' shared group by default.To test this, I created a new user called 'friends'. From my terminal, I can see how the new user files look like:
joe@linux:~> ls -l /home/friends/
total 40
drwxr-xr-x 2 friends users 4096 Sep 3 11:37 bin
[code]...
I have mounted samba volume and I need to have write permissions for every new folder that's being created (currently, by default, on every newly created folder i have only read and execute permissions).I tried changing umask, but with no effect on mounted folder, umask changed only for local filesystem. I tried mounting with umask option, but with no effect again.I'm using ArchLinux on this machine, and I installed samba using default package manager (pacman).
View 1 Replies View RelatedHow to configure fetchmail in RHEL 5.5
View 2 Replies View RelatedI installed Debian 5.03 Lenny successfully on my machine. I got this error during boot: ACPI : invalid PBLK length [5]. After that the Operating System boots properly and starts normally. What does this error statement mean? Is it safe to work with this installation despite this error?
View 1 Replies View RelatedI have an ubuntu 8.04 running samba that's integrated with active directory but not using winbind. Things are working fine except there are lot of entries in the samba logs about:
smbd/sesssetup.c:reply_spnego_kerberos(439)
Username CARBYkentoso$ is invalid on this system
CARBY is the domain name and kentoso is the computer name. I only see this error for the computers and not the users. Other than this, it's working fine. Is there a way to make this error go away? This is the smb.conf file:
[global]
workgroup = CARBY
realm = CARBY.LOC
server string = LION
security = ADS
map to guest = Bad User
obey pam restrictions = Yes
passdb backend = tdbsam
pam password change = Yes
passwd program = /usr/bin/passwd %u
passwd chat = *Entersnews*spassword:* %n
*Retypesnews*spassword:* %n
*passwordsupdatedssuccessfully* .
unix password sync = Yes
client NTLMv2 auth = Yes
client lanman auth = No
syslog = 0
log file = /var/log/samba/log.%m
max log size = 1000
name resolve order = dns hosts lmhosts bcast
printcap name = /etc/printcap
disable spoolss = Yes
preferred master = No
local master = No
domain master = No
ldap ssl = no
usershare allow guests = Yes
panic action = /usr/share/samba/panic-action %d
invalid users = root, nobody
[printers]
LOCment = All Printers
path = /var/spool/samba
create mask = 0700
printable = Yes
browseable = No
[print$]
LOCment = Printer Drivers
path = /var/lib/samba/printers
[SHARE]
LOCment = Samba share
path = /share
valid users = @share
admin users = djoe
read only = No