Ubuntu :: Grub Error 15 - Unable To Boot Anything From A CD Because It Just Waits And Then Jumps To The HDD?
Nov 27, 2010
I decided to install Ubuntu on my desktop after the setup went well on my laptop and I liked the OS. I already had Windows 7 and Backtrack 9 installed on my HDD, so when I was in setup I took the 200gb partition for BT9 and formatted SDA5 to ext3 with "/" as the root. Then checked "format" and selected SDA5 from dropdown list and continued to install.Everything went smooth in the installation and I was prompted to reboot which I did assuming I would soon see a GRUB screen. Instead I got an error saying
and then the computer just freezes. I've tried to boot from CD but I just get "CD-ROM Boot Priority ...Boot Ready" and then after about 30 seconds it tries to boot from the HDD and I get the same error.I've read that I need to configure GRUB somehow but I have no idea how to do that and I can't boot anything from a CD because it just waits and then jumps to the HDD. I guess what i'm asking is if there is a way to configure GRUB from the BIOS menu or make it possible to be able to boot from a CD.
not sure what happened, yesterday i installed the new kernel and played around a bit by uninstalling some older kernels. Everything was fine but now i cant boot into ubuntu any more. I have a Dual boot and Grub let me boot into windows. for linux grub gave error 17 (if i remember correctly).o i popped in the LiveCD and tryed gparted to check for errors (nothing changed). I tried rewriting grub from the live cd and that made matters worse.
I installed windows and haven't been able to boot to fedora since. Without a boot disk my machine complains 'BOOTMGR is missing'. If I use a boot disk to access grub on another linux partition (/dev/sda5) I can try to boot my fedora install using its old grub.conf settings. However this gives me the grub error:
Code: root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /boot/vmlinuz-2.6.29.6-213.fc11.x86_64 ro root=UUID=63608748-e626-4a3f-9232-c836524f606f rhgb quiet
Error 2: Bad file or directory type Darn grub thinks the file system type is ext2fs - this makes me think windows might have written something (perhaps its bootloader) to the first partition rather than the MBR.
A few days ago I decided to ditch Windows for good. I read for hours about a Linux distro and settled on OpenSUSE.
I just need to say one thing. Linux is not for the feint of heart, and everywhere I turn (forums), I see computers riddled with error messages, frustrated people, and the list goes on.
I'm willing to work through this though since I feel that the benefits will outweigh anything that Microsoft can offer, so here goes.
Upon installing the new build of OpenSUSE, I encountered an error message that was fixed by hitting retry (I forgot the name, but I remember it being something like Etk3 or something of the sort).
My issue now is not being able to boot into the OS. I'm getting Error 25 from GRUB on stage 1.5
I've installed 11.1 over my Windows XP partition. I want XP no more. Additionally, I read the sticky and followed all the instructions. I also selected the KDE desktop (I still don't know the difference between that and GNOME despite Googling it several times).
I'm running Debian testing and after a recent software update, suddenly I can no longer boot into my single Linux kernel image anymore. I did look at the software update before I did it and I don't believe that it removed any software packages. When I try to boot into my linux 2.6.26-1-amd64 image, I get the following message from grub:"error: unknown command `initrd'"..The same error appears if I try to boot into single-user mode. I have a Windows XP partition on the same hard disk and I am still able to boot into that from grub. I've searched the net and haven't really found my same problem replicated anywhere. I would imagine that the problem is just that somehow the initrd package got removed in my last software update, but again I don't recall seeing any software that the update planned to remove.
Any thoughts on how I would go about fixing this problem? Since I'm unable to get into Linux at all, I imagine I'll have to use a LiveCD to get in and fix the problem, but I don't know where to begin looking.
I have a directory that contains a bunch of sound directories containing WAV files.I want to make a script that plays one, waits 500ms, plays one, waits, etc.i tried cat `find . -name *.wav && sleep 1` > /dev/dsp.It plays them but with no delay between.
Last week I installed minimal Ubuntu Karmic with XBMC live on my HTPC. I'm connecting to my fileserver thru a wireless interface and although that works like a charm most of the time, every once in a while the interface doesn't come up during boot and the PC 'hangs'.
I then press ctrl+alt+del and the pc reboots and the Grub2 boot menu appears, I suppose because the previous boot didn't go well. However, the boot menu doesn't have a timeout, I have to press <enter> to continue booting. My wireless USB-keyboard isn't working at that stage yet, so I'm unable to continue.
I have a very strange problem with Fedora 13 on my home PC. When booting it just hangs at random points in the boot process. When it happend the first time, I thought the PC probably is completed frozen, but then I discovered that hitting the return button got the boot process going on again, but just step by step. That means on every boot I have to keep hitting the return button until gnome starts up, that's very annoying. So for any reason the boot process seems to switch to interactive mode somehow...
I already removed the kernel boot options rhgb and quiet to see, where exactly this happens in the boot process. But as I said, it seems to be completely random. Sometimes it's when "Starting udev", sometimes, when setting up eth card, when starting atd, and so on. It's different every time.
By the way, a similar thing happens when shutting down. It can take up to half an hour until the PC really shuts down. But it's usually going faster if I just keep hitting return after issueing the shutdown command (which actually looks a bit dull). But the PC finally shuts down at some point. That's not the case when booting up. I thought, maybe there's some kind of timeout problem. But even waiting for two hours, the PC does not startup without keeping hammering the return button
A failed upgrade, from disk images, of Fedora 10 to 11 resulted in no GRUB bootloader main menu appearing on bootup (no WIN, no LINUX choices from which to boot). I am booted directly into the GRUB command shell...so, no WIN, no LINUX, nothing. And my understanding of GRUB shell commands is very low.I have 2 hard disks, WIN on the first, LINUX on the second. I believe GRUB Bootloader is on the first disk.Sadly, I have no external install media.An old grub.conf hardcopy indicates that root =/dev/sdb2, root (hd1,0), kernel /vmlinuz....olderversion...(relative to /boot),initrd /initrd...olderversion... (relative to boot). and WINDOWS on (hd0,1), with chainloader +1
I need to somehow get past this grub shell, and re-install/re-instate the grub bootloader, so it can boot normally.What grub command(s) must I use? I've played around with the commands, but with no success.I worry that if I can't resolve this, the whole machine may be useless.
slackware and am infact running Vector Linux which is slackware based. I used to use fedora on my old laptop got a new on and tried vector. The mouse on the new one doesn't seem to want to work properly, it jumps alot and usually ends up at the end of the screen unable to move, however does manage to click almost every icon on the screen and change desktops.A USB mouse works fine its just the touchpad.It's a Zoostorm Freedom and I can't even find the windows drivers for it let alone what i need for this. I tried editing the xorg.conf to stop the tab button, which doesn't do anything, installed the latest synaptics and still nothing, tried using what someone else uses and still nothing, I cant even find out what kind of mouse it is!?
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
When I shut down the machine everything is as it should be. Time set from the net, hwclock synced. When I boot again, time is set several hours into the future. This is an additive process, when I don't set the correct time it drifts with every boot even days into the future (until boot is denied, because files are too far in the future). I tried to get rid of that behaviour by doing:
Code: sntp -P no -r pool.ntp.org hwclock --systohc I renamed /etc/adjtime which looked like this:
22292.201093 1289670517 0.000000 1289670480 UTC
Now it looks as follows: 0.000000 1289733620 0.000000 1289733620 UTC
To no avail. What could cause that and how can I correct it?
I had a dual boot system with 3 partitions, Windows 7 on one partition, and Windows XP on another partition and a Data partition. I decided to load Ubuntu 10.10 on the Windows XP partition.During installation I selection manual partition, and deleted Windows XP.after successful completion of Ubuntu installation "Grub" directly boots into Ubuntu, it doesn't show me the OS selection screen. After following some forum posts I did an update grub
Code:
Generating grub.cfg ... Found linux image: /boot/vmlinuz-2.6.35-22-generic Found initrd image: /boot/initrd.img-2.6.35-22-generic
Dual Booting my laptop and unable to change the Boot Records on the drive. Not because I dont know how, but my primary OS will fail to boot(win7).
I have drive partitioned as follows... sda1 = Win7 system (default install) sda2 = Win7 Main (default install) sda3 = swap sda4 = Extension (I think thats what its called) sda5 = / (ext4)
What I need is a boot cd or perferably Grub installed on a 256MB Thumb drive with the options to load the installed system from sda5.
I installed Ubuntu 10.04 LTS on a machine with 8.04 LTS, and have dualboot between those i system.The problem is when a start a get a message:'Boot error'If I hit 'Esc' I get to the Grub -meny and can boot as normal.
Ubuntu 9.10 was set up to handle the booting selection - previously I thought it was xp but Ubuntu 9.10 "did" it. The system started out as a xp / ubuntu 9.10 dual boot on a 400gb drive. xp has 210gb, ub has 80 and their is a 100gb shared storage. Xp was installed first and then I followed a guide over at linuxconfig.org to get ub installed so that I could select which OS was wanted at boot. Ubuntu manages the boot up menu (Went back to look at my notes from the original setup) The owner tried to update to ub 11.04 and afterall was said and done the machine now boots to the message
error file not found grub rescue I can't say if 11.04 was properly installed or not. Ask whatever you like and I'll give the best answer I can. I think the xp install is okay but I can't say for certain as I don't know how to boot it outside the bootmanager at startup. Data has been saved so if I have to blow it all away and start over I can but I'm hoping I won't have to.
I've been dual booting ubuntu and xp for about 2 months now. i booted this morning and all i get is this grub menu. i saw the grub vs. grub2 page but have no idea even where to start.
The problem is I've set up a dual boot with Xp and Ubuntu 10.04. Ubuntu was working fine till 2 days back but now when I select Ubuntu from the grub screen i get a whole lot of numbers next which it'll say Usb drive or sd card reader etc.. these go by quickly and then the comp stops running. If i press enter on the keyboard I get Initramfs and then i can type but nothing happens even if I type reboot. if I press cntrl+alt+F2 then i get a blank screen with flashing cursor. Same with recovery mode. Windows boots fine. The grub2 screen comes fine. The last thing i did before this happened is reconfigure the grub2 screen, but it seems to be fine (i had added a background img and reordered the boot options) I did not edit grub.cfg. I would prefer not to reinstall it as iv done it a half a dozen times already in the last few weeks..
through a series of mistakes i have managed to take a working system and make it unable to boot. my two objectives right now are to back up my data, and to make my system bootable. here's how i got here. i used the Upgrade Manager to upgrade to 10.04 thinking it would solve a problem i was having with my previous installation. when that had completed i found I was unable to boot into 10.04. The system would hang after echoing the message "checking battery state." I attempted to rebuild my grub file, thinking this would solve the 'battery state' problem. this was a mistake. I ended up deleting it, and now there's no menu.lst file in its place.
currently when i boot up normally (i.e., with no Live CD) I automatically go into the rescue mode. so far i haven't managed to enter a command that rescue mode recognizes. alternatively, i can boot from the installation CD for Ubuntu 10.04. per this page: [URL] I take these steps:
1. boot from the installation CD. 2. go into terminal 3. type these commands:
I made an xubuntu disk.loaded it and rewrote my hardrive.on a pretty old averatec laptop. 3/4 of the install it gives a a io error and stops the install.I tried to reinstall from the screen again but got the same error.So I rebooted and it skips everything and goes straight to a grub loading stage 1.5, grub loading error 17. It even skips the live cd.I also tried to do it thru a usb stick but that gets ignored too.
I have Win XP SP2 installed on my machine. I wanted to try Ubuntu and i created a CD an and wanted to install the OS. The CD booted and i selected the option of "using The OS together and selecting which one to boot" or something similar to that. Ubuntu and changed MBR and installed itself. However on restarting I am getting Error 18. Now i am unable to use my computer at all.
In recover my XP at the moment and how to install Linux so that it does not mess around with any other OS?
I upgraded from grub to grub2 recently, and during an update of my system, it ran the update-grub command which prompted a window asking me where to install Grub. Since I didn't know what partition to install it to and the help suggested to install it to all if I was unsure what partition to install it to - I accidentally installed Grub to my Windows partitions (both the regular and the recovery console).
So now, I can't boot into Windows - the computer just hangs after Grub with a blinking cursor and I have to perform a hard reset. Is there any way for me to restore the boot record for the windows partition without having to reinstall windows from the ground up?! I can't use Linux for my webbanking and other important tasks, so (unfortunately) I need Windows back desperately!
I have accidentally started the recovery OS of my netbook, and messed-up grub. I can start the Netbook from a live CD, but I do not manage to restore grub to anything useful. Below the outcome of the Boot Info Script I have found in the forum:
Code:
Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive in partition #5 for /boot/grub/stage2 and /boot/grub/menu.lst. => Syslinux is installed in the MBR of /dev/sdb
I am able to get into GRUB and boot Linux, but whenever I select Windows, all I get is an error about a missing boot loader.
After the Windows install disk failed to repair it, I reinstalled the Windows system and then used the Ubuntu live-CD to restore GRUB in order to be able to boot into Linux again. Now I have the same problem as when I started (although the error screen is somewhat different now).
Does anyone know how to break this "evil circle" of mine?
i had installed linux on my 40 IDE hard disk drive now i want to install xp on then linux, but i am not able to boot any cd now, that grub problem is coming again and again.THIS IS WHAT I DID BUT COULD NOT FIND THE SOLUTION1.I formatted entire hard disk by connecting it to second computer fully formatted took me almost 1.20 minutes to format still nothing happend to that grub problemthe only way i could install xp on that 40 gb ide hd was to connect it to 2nd pc and install xp on it,but then when i connected this hd to first one i could install linux on it but xp was giving some popups windows as now the motherboard had changed on this 1st pc
After upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.
I recently performed a reinstall of ubuntu after mucking up my partitions, and I am running it dual booted with windows 7.
I recently performed a grub-pc update, but I didn't know what it was asking me to do during the process itself of updating the process.
It asked me at one point where to install grub, and I selected all my partitions because it suggested that if I didn't know. I think that may have damaged my windows section, which was also selection.
I've attached the output for:
Code:
Problem symptoms:
1) Weird upgrade error in apt-get 2) Unable to boot windows 7 3) Unable to activate proprietary drivers 4) Perpetually being reminded to restart
