I upgraded Ununtu from 10.04 to 10.10 Maverick and the Windows 7 partition disappeared from my grub menu. It used to work OK in Lucid.I have tried update-grub but it does not find the Windows install.
Code:
pete@pete-vaio:~$ sudo update-grub
Generating grub.cfg ...
[code]....
I need to add my windows installations to the grub menu.I have windows 7 and windows xp on hd0 and windows xp on hd1.Using 'sudo update-grub' doesn't seem to help.So how do i fix this?
View 6 Replies View Relatedhow to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
[Code]...
It would be nice to get a sticky thread up for dual boot installation issues. It seems like this is a very common problem with the upgrade from 9.10 to 10.04.
I was finally able to solve my issue dual booting 10.04 and Windows XP Home at this thread.
[URL]
I had to reinstall Grub2 and run update-grub.
Then I had to run Rescue on my XP disk. Once to the DOS command line I ran the following command:
C:Windows>fixboot c:
I rebooted and now all is well. I can boot to Ubuntu 10.04 or Windows XP from my Grub menu.
I try to install to my desktop as Squeeze/ISPConfig3 server, but GRUB does not load after several re-installations.
I have
- 6 x 500GB HDs
- ASYS A8N-SLI Bios SLI-RAID active as only then RAIDSata1-RAIDSata4 can be seen 2 x RAID1 (has to have something) and all drives can be seen by Debian-installer as individuals Same has been working with LinuxMint (both LM10 and LM Debian Edition) (with and w/o fake-RAID)
1st test: Guided partitioning (LVM) for one disk (where /boot will be separated) => Installation OK and starting.
[Code]....
I recently installed Windows 7 on Virtual Box (running within Ubuntu Karmic 9.10), and it runs great. However I want to also add Windows 7 to the Grub Menu, so I can choose at the start between the Ever-Glorious Ubuntu and the Depressingly-Drab Windows 7.
View 1 Replies View RelatedI just got a Zino HD from Dell, and was planning to use it connected to my TV, dual booting Xubuntu 10.04 and Windows 7. I did, however, run into some issues. I suspect I'm just going to have to burn a restore disc and start over, but I'd like to fix this if possible. Here's what I had to start with:
1 vfat partition (bootup?)
1 dell restore partition
1 Windows partition
Because the restore partition was a bloody 20 GB, and I could always get the restore done via disc, I reformatted it as ext4 and used it as "/". I then shrunk the Windows partition and allocated a home partition and some swap space. Note that immediately after the installer, I reformatted the home partition manually with an inode size of 128 to use with the Windows ext2 driver, but that shouldn't have really changed anything. End result file system order:
1 vfat
1 ext4 mounted as "/"
1 Windows
1 Swap
1 ext3 mounted as "/home"
I now have two problems:
1) I do not get any GRUB menu at all! It just boots directly into Xubuntu with no choices (not even memory test or restore mode).
2) I, obviously, can no longer boot Windows.
Keep in mind that this a fresh install on a brand new machine; I can't think of any reason GRUB wouldn't even show me a menu.
I recently upgraded to 10.04. The grub menu shows my windows partition but does not load it when I select that OS.
View 2 Replies View RelatedI was getting ubuntu grub menu, and i was able to login to windows xp, windows server 2008 and ubuntu 10.10. Recently there was some problem with windows server 2008 and i had to reinstall it, once i did that i lost my grub menu. now i am getting plain windows menu with option of login into windows xp and windows 2008. So how can i restore the grub menu, so that i can login into all the three os from one point.
View 9 Replies View RelatedI got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
I have a used PC that came pre-installed with suse 11.2.Unfortunately, I do not have the install disk to use in case of whatever.I already know that when configuring a dual boot with Windows and Linux, it is recommended to install Windows first.I do not have that luxury now as 11.2 is installed and GRUB is the boot loader.Question is, if I boot the Windows 98 install disk on boot, how to not mess up GRUB and still add Windows 98 to GRUB menu?
One hard drive only here. 98gb free.It seems that W98 install will overwrite GRUB in this situation - causing problems. Maybe not, I don't really know for sure.I just need to install windows 98 on the same hard drive and if possible, have suse and w98 visible on boot in GRUB.
I have a Compaq Presario CQ60 with Nvidia GeForce 8200M graphics card. When I first installed Windows 7 followed by Karmic in dual boot I could boot into both OS. Now when I try to boot into Windows, it displays the Windows logo and then drops back to the grub menu. It may have started happening after Windows 7 installed updates. I tried reinstalling both Windows and Karmic again and it again worked initially but now Windows no longer boots. Does anyone have any suggestions about what may be causing this or how I can fix the problem without reinstalling?
View 9 Replies View Related3 partitions (in order): Windows 7, CentOS and shared data partition.
I need to increase the size of the Windows 7 partition (c:windowswinsxs seems to be something not easily remedied).
GParted didn't work in moving things around (bad sector) so I wiped out its partition (# 2 out of 3) and I was able to increase the size of the Windows 7 partition (I can reinstall CentOS easily and not much work lost).
Except ... no more grub menu (unsurprising). This incantation does allow me to boot into Windows 7.
Is there any way of rebuilding the grub menu short of reinstalling CentOS (5.5)?
I installed normally Ubuntu in my lenovo laptop, but GRUB shows two installations instead of one. Whatever happens to one of them, happens to the other, except some command-line work.
View 4 Replies View Related9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want.
In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
Is there a document explaining all of the radical changes?
9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want. In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
View 1 Replies View RelatedThe first is I seem to have 3 GRUB installs. So whilst I update the one from my live session, the change does not appear in the boot up menu. I had installed 10.10 from a CD into a different partition (sda6), but that will not boot, so I have just deleted this and done another grub install and update. The kernel I am using has just been updated from 10.04 to 10.10 too, and it is this that I use and the Grub I have been working on (sda5).
[Code]...
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
I upgraded to Ubuntu 10.04 recently and now have MBR problem. When selecting Windows XP from the GRUB menu the screen defaults to terminal mode with grub rescue> displayed. I admit I know little to nothing about Ubuntu, unix, etc other than I like what I have seen so far and am trying to learn more. I need to (unfortunately) use Windows and have data on it that I can't afford to lose. How can I repair the problem so I can boot Windows from the menu? Thank you
P.S. I was dual booting successfully earlier. I had the previous version of Ubuntu running with Win XP and everything was fine. The problem started when I upgraded to Ubuntu 10.04. I have tried reinstalling 10.04 with no success. If I am unable to get dual boot working my wish would be to save my Win data and then I can wipe clean and reinstall Win and Linux.
At the moment my GRUB 2 boot menu has all the Linux kernels, then memtests, then Windows. I want it to have Windows, then Linux, then memtests. I'm thinking I can do this by renaming /etc/grub.d/10_linux, 20_memtest86+ and 30_os-prober to 20_linux, 30_memtest86+ and 10_os-prober respectively.
View 2 Replies View Relatedi have a windows xp OS installed on C and on D ubuntu 64bit ! and i disabled from windows to see the booting manager where it shows me weather to choose Windows or ubuntu ! and the GURB menu , when it comes up i cant see windows !
Note: i tried the sudo update-gurb this or wtever command was it ! but also failed to show windows
I had Windows XP installed, then installed Ubuntu 9.10 in a different partition. I was able to choose which OS to boot. Then I did a distro update to 10.04. Now Windows is missing from the GRUB boot menu.
sudo update-grub doesn't change anything so I think sudo os-prober isn't finding Windows.
I've edited grub.cfg and can get an entry added for Windows, but it doesn't actually load Windows. It just reboots the machine. If I run sudo update-grub after adding a menuentry for Windows to grub.cfg, the menuentry I added disappears.
I've run testdisk, but BackupBS isn't an option. It says the original and backup boot sector are identical.
cfdisk says sda1 is the only partition that is NTFS and it is set to Boot.
I've already installed all available updates from lucid-security and lucid-updates.
I've run bootinfoscript and here are the results:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
=> Windows is installed in the MBR of /dev/sdb
[Code].....
I just installed ubuntu on a remote windows server, using wubi. How can I launch ubuntu? Restarting the remote machine obviously disconnects my session. Is there some way to access the grub menu from windows?
View 9 Replies View Relatedi have a dual boot. i loaded 9.1 on one disk and windows xp is on another. grub worked fine. i downloaded 10.4 and i must have selected the wrong option cause when i restarted it dropped me into a shell. i reloaded 9.1 and wiped out 10.4. again i must have selected the wrong option cause i get the grub menu with an option for windows but nothing happens. 9.1 comes up alright and i can select windows office files from ubuntu.
View 1 Replies View RelatedI installed Ubuntu as a dual boot to play with a while ago, but I really don't have time to be testing it right now, so I'm wanting to set the GRUB menu to automatically pick Windows 7 instead of me having to hang around waiting for the menu to pop up and hitting the right buttons when I'm barely conscious.
Someone linked me here: [URL] and I found the menu.lst file, but when I opened it to edit the default, it was blank ... is the file elsewhere now or something? Do I not have access rights to the file? What's going on, what do I do?
I installed Ubuntu onto a separate partition I have. Now however when i boot up, Grub (v1.98 ) gives m 5 options.
Ubuntu, with Linux 2.6.35-22-generic
Ubuntu, with Linux 2.6.35-22-generic (recovery)
Memory Test (memtest86+)
Memory Test (memtest86+, serial console)
Windows Recovery Environment (loader)
With no Vista option.
When I run the recovery environment however, it runs just my regular vista boot would have. Is this just a name issue? Ideally I would like to have my Vista option back.
My set up is internal hard drive Windows 7, external Ubuntu Karmic. The reason I have it this way, despite Linux being my main OS, is because my internal hard drive is 6 years old and half the capacity of my external new one. Have tried quite a few set ups with various Linux platforms, but have finally settled on above. As yet, I don't know Linux or Ubuntu all that well. Getting somewhere, but it's a steep learning curve.
Because of constant errors reinstalling WinXP - umpteen installations and it keeps crashing - the problems are with security updates and SP3 - I finally bit the bullet and intalled Win 7. I only need Windows for a few essential programs or I'd happily never look at it again, so it filled me with horror doing this, but I couldn't take the crashes any more. So, today, Win 7 installs just nicely. However, I can no longer boot my external Ubuntu hard drive. The error is, 'Grub loading stage 1.5... Grub loading please wait... Error 15'. I load up the live cd, but when I try to follow instructions given to other people with Error 15 (editing files, accessing root) I don't have permissions.
I have installed f14 in my laptop. The hard disk partitions are as follows
Code:
# fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
[code].....
Since i installed opensuse 11.2 when i boot my pc, grub doesnt show me windows to boot only opensuse and failsafe this is my details code...
View 9 Replies View RelatedI've just installed windows on my computer for gaming, since it took over the boot loader I went into the repair system function of the opensuse DVD. Now I'm back in linux but no windows partition is showing up on the grub menu. This is the output of fdisk -l how do I make it so grub sees my windows too? This is probably an easy fix but I'm a prior ubuntu guy and just started playing with suse which seems a bit more tech savvy and less forgiving then ubuntu. code...
View 1 Replies View Related