Using Ubuntu 10.4 32-bits, Windows 7 32-bits (sda) and Windows 7 64-bits (sdb). Grub displays 2 menu-entries Windows 7, but both entries start Windows 32-bits (sda).
I am wondering if I can install a 32 bits guest Windows XP in VirtualBox in my 64 bits Ubuntu Natty host? I need a 32 bits Windows to run some programs.
When I restart, GRUB sometimes doesn't start. It just hangs at the flashing cursor before grub.
When I restart again, grub works fine. The flashing cursor shows at the top of the screen for a few seconds, and then there is one or more new lines, and then the grub screen.
This is on an HP Pavilion 640 which is otherwise very stable.
Windows 7 and Kubuntu 10.04 on separate HD partitions. I have three partitions: /boot, /root and swap .
I donno why but after several boots somehow GRUB gets corrupted or something so that when i restart the laptop, it displays "Grub 2 loading..." and restarts again. This seems to go on in an infinite loop, restarting the machine again and again trying to load grub. When I re-install grub, everything is fine (I am able to see the Grub menu of ubuntu and windows and able to boot into both) .
When I try to enter Windows from GRUB my computer displays a black screen and then I'm back to GRUB. It's impossible for me to enter my Windows XP partition.
sudo fdisk -l:
Quote:
/dev/sda1 * 1 52930 425160193+ 7 HPFS ou NTFS /dev/sda2 52931 60802 63224256+ f Win95 (LBA) Parti��o Extendida /dev/sda5 52931 53251 2571514+ 7 HPFS ou NTFS /dev/sda6 53251 60281 56470528 83 Linux
I'm new to the world of dual booting Ubuntu. My computer is currently running windows 7 64-bit, and I'm trying to install Ubuntu 32-bit to run beside it. So I've created a boot disk, and I try to install Ubuntu. The weird thing is when I get to the frame that says "Prepare disk space" it correctly shows that I have windows 7 on the computer, but it shows it's on the wrong drive. In fact within the Ubuntu installer it doesn't even show the physical drive that windows is on, it only find the other two drives. If I load up System > Administration > Disk Utility then I can see all 3 physical hard drives and all the partitions on them, but not under the Ubuntu installer.
So I tried installing Ubuntu onto one of the other physical hard drives and that seemed to go just fine. The only problem is now when I boot, the only way I can swap operating systems is to go into my BIOS and change the boot order of my hard drives. If the hard drive with Windows is higher in the boot priority, it will boot windows, no problem. If the hard drive with Ubuntu on it is higher, then it takes me to grub, where it correctly shows windows 7 and ubuntu. Only problem is when I choose windows 7 all I get is a blinking cursor and nothing happens.
If I choose Ubunutu it boots correctly and everything works. So in a way I do kind of have them both working, but it'd be nice not to have to go into my BIOS just to change operating systems. I'm guessing that grub's problem is that the Ubuntu installer identifies the wrong drive that Windows is installed on, so when I pick Windows from grub it goes to the wrong drive. Can I fix grub manually? Or is there some compatibility issue between Windows 7 64-bit and Ubuntu 32-bit that is causing this conflict?
I have a new netbook - "Eee PC 1005PE-PU27-BK" and installed Ubuntu Netbook Remix 10.04, Kernel Linux 2.6.32-24-generic. I love Ubuntu, but I also want to be able to access Windows 7 if I can. I've read some on GRUB, but the menu on startup isn't showing my Windows 7 instance. I've tried reinstalling GRUB, but when I run sudo update-grub, I still get this:
Code: Generating grub.cfg ... Found linux image: /boot/vmlinuz-2.6.32-24-generic Found initrd image: /boot/initrd.img-2.6.32-24-generic Found linux image: /boot/vmlinuz-2.6.32-21-generic Found initrd image: /boot/initrd.img-2.6.32-21-generic Found memtest86+ image: /boot/memtest86+.bin done
I know that Windows 7 is still on the system, I just can't access it.
when I reformat ubuntu, I use AptonCD to save packages and then restore them without downloading anything over again. what I want to know is: I have the 32 bits ubuntu installed and then I downloaded the 64 bits version. If i reformat to the 64 bits one, would the DVD saved aptoncd packages from the 32 bits work on the 64 bits installation?
Right, so I've looked high and low for the answer to this problem and haven't found it, although I've found a million and a half threads about grub especially when it comes to dual booting windows. Which I'm not. What I am though, I suspect, is an idiot who shouldn't mess around with my computer at 4 am.
So the problem is every time I turn on my pc, grub tells me it can't find a file system and goes into recovery mode. Can't boot into ubuntu at all. Am using the live disk to type this.
I also think I know why grub is doing this, I was dual booting windows before, I had windows installed originally, added ubuntu to a new partition. Was having problems with grub. Figured that reinstalling it wouldn't be a bad idea, it might fix it. In that process I did something rather stupid, I accidentally installed grub to my other internal hard drive. There is no operating system on it. Just movies, music, etc. The problem, I think, is that my second hard drive is sda, and the one with my os is sdb, which I suspect means that grub is loading from sda and finding no operating system, rather than from sdb. (It's like that because my larger drive wouldn't fit into the sda slot on my computer, long story.) How do I remove grub from sda?
All this started when I decided to upgrade Ubuntu 9.10 to 10.04. Now Windows XP gives me a blank screen and doesnt run. I have tried a bunch of things but didnt help. I also clean installed Ubuntu 9.10 into a new partition and removed the deleted the other partition.
[Code]....
1. Windows XP on sda1 wont start from grub2 (version 1.97-beta4). 2. I can access the windows partition from Linux and see all the files. 3. When I boot using windows cd, and go to recovery mode it doesnt list Windows XP. 4. From windows Recovery mode when I try "diskpart" it says no partitions in c drive.
i have a 250gb hdd and a 160 hdd. i installed wind0ws 7 on the 250 and then ubuntu 10.10 on the 160. In the past (8.04-10.04) after install ubuntu on boot grub would give me the option to go into ubuntu or windows, now ti doesnt give me that option and boots directly into ubuntu. I dont even think it has recognized that windows is there.
I just reinstalled Ubuntu 10.04 (I was running it wubi but various issues prompted me to install it in a separate partition) and now windows isn't an option in the GRUB. I have windows Vista on /dev/sda2 and I can see it on GParted.
I tried looking through some of the other posts, but I think that I need some direct help with this one. I have tried update-grub and nothing changed.
I don't use Windows often, but it is nice to have the option.
recently i installed ubuntu 10.10 and now when i start my computor i dont see windows xp in the grub bootloader anymore. (it worked fine for 10.04) my brother as well has had the same problem.
I am having trouble getting a dual boot setup on Ubuntu remix on a netbook. The install went fine, but then windows would not book. I had a windows error. So I reinstalled windows, and rebuilt grub. Now when I try to launch windows from the grub menu it says "error: no such device: 0a82ff1982ff0849". How do I go about fixing that? I can boot to Ubuntu fine now.
Since upgrading to Lucid (I think), I can't boot into Windows. When I select the Windows Vista entry in GRUB, the screen goes blank for a moment before returning me to the GRUB menu.I have tried pressing 'e' to edit the GRUB entry before booting, and what I find is that it says the root is hd0,1Since my Windows partition is sda1 in GPartEd, should that translate to, for example hd0,0 ?The only reason I want to boot into Windows in the first place is to install a BIOS upgrade from HP, which only works with their Windows software. If someone can suggest an alternative way of doing this then I won't need to boot into Windows at all.
got myself a new pc, windows 7 installed.. i just got done installing ubuntu10.10. it said to finnish, i had to reboot.. ok, no problem.. i reboot, loading says uuid is not valid.. but, it loads 7 fine.. they are on the same drive, but different partitions. i only got a wireless usb keyboard and when it goes to the shell, it doesnt seen to recognize it.
I'm quite new to linux and I recently (and courageously) upgraded the computer of my work from opensuse 11.0 32bits to opensuse 11.2 64bits.
Well, everything would be quite fine except that I still have some softwares 32 bits that have the 64 bits version available. I know that because, using YaST, I can see by the Installed software section that there are 'choices' of versions for some programs; these versions are 'i586' and 'x86_64', and many of them have the i586 version installed.
So, I wonder if there is some type of auto upgrade all programs which are i586 and have the matching x86_64 avaliable...
I recently have installed Ubuntu 10.10 Maverick Netbook Edition in my personal netbook. The thing is that I had installed Windows 7 in the hard disk drive so I decided to install Ubuntu alongside with it. After the process of installation everything was cool but I hadn't the Grub working. I then pressed the Shift button during the booting process so I got the Grub menu but it didn't show the Windows 7 partition. The Windows installation was not erased because its file system is present in Nautilus. I have tried reinstalling the Grub a thousand times but nothing changes. I have attached the results of the boot info script so you can have some info about my booting configuration.
I have windows7 installed in my laptop. I tried installing Redhat linux in it, and I was successful. But then I logged in with windows7 and deleted the partition in which I had installed redhat through computer management. Now my system doesnt boot with windows instead it boots with GRUB. Also to inform that the deleted linux partition I merged with Windows.
I can't turn on my PC and write jet from my neighbors notebook. Because of problems with Windows updates und ubuntu vpn I installed today Windows 7 again and then openSuse. It was OK. Than I began with set up of different Programms for windows, like WinRar, Avira Antivir ect... As soos as it was done I wanted to begin with set up of openSuse... But the start menu is gone - there is nothing there now! Last time I could choose betwee 2 windows partitions, openSuse start-partition and openSuse fall-Save. -Now there is only "grub>" line
And I doesn't have any idea what I can do, I doesnt know where are startfiles, where is /boot/grub order, I don't know how can grub be used also. But I know that if I try to register my windows 7 agan at the same day, my windows lizens would get invalid. Has someone any idee what can be done?
I just create a vm image with 2 CPUs to be used on a one CPU machine. it works great. Now, i am thinking about creating a 64 bits Redhat VM image to be run on my 32 bits machine. Is that possible?
I've installed Lenny with no problem, but I tried switching to Squeeze, and grub for some reason didn't pick up on the Windows partition this time - it just shows the two Linux options (debian and debian single-user). I check the menu.lst file (which I've edited under Lenny with no issues), but for some reason it doesn't exist at all in this install. Is it in a different location with Squeeze maybe?
I use slack 13.1 64 bits on my intel i7 machine. That is I can't find a flash-player plugin that works on all browsers. The firefox crashes on open. The release of adobe 64 bits plugin simply doesn't work on any browser. I use slack 13.1 64 plus kde. Anyone knows some that works?
I have a 6TB external eSata bay (Lacie BigQuadra). I made a GPT table with only one big ext4 partition. All was ok. I resized the ext4 partition and I created a 1TB NTFS partition. I can use it on Kubuntu but Windows 7 tell me the partition is not formated. When I go back to Kubuntu, parted tell me that the secondary GPT table is not at the end of the disk and tell me it's probably an other OS that thinks the disk is smaller that its real size. It seems Windows 7 thinks the disk size is 2 TB (and modify automaticaly the GPT table and create a secondary GPT table on the middle of the disk).
What can I do to make my NTFS partition visible in Windows 7? What can I do to prevent Windows 7 to move the secondary partition table on the middle of the disk and to modify the primary GPT table ?
Ubuntu in Windows 7 (64 bits) File system installed using Wubi I got Ubuntu 10.04 LTS intalled using Wubi. That means Ubuntu resides inside Windows file / folder system. It also means Ubuntu does not have its own partition. Here is what I found out:
1) It cannot detect wireless network unlike Win 7 on this same laptop. However, when I plug in ethernet cable, it was able to detect it. Is there a fix this problem?
2) I cannot see Windows folders. How do access windows folder from Ubuntu side and vice versa?
3) I forgot to set the disk space for Ubuntu during install and I think the default is 17 GB.Would this cause me problems? If so, what do I need to do? How do I expand the disk space for Ubuntu?
