When I start my laptop I get this message. error: no such device: 795a9b9c-b3fe-4562-9921-f7a502fdc566 grub rescue> I hadn't done anything that would have caused this.
View 3 RepliesSince May 12,2009. Our system lifekeeper has the error log "lifekeeper error: DEVICE FAILURE on SCSI device '/dev/add'", but it ran normally. Until last week, it failover to the standby server. The disk still running, the error still come out.
View 3 Replies View RelatedThis morning it would not boot; when I tried to wake up the system, it gave me a bunch of errors, the last ones being as follows: "mount error: could not resolve address for servername: No address associated with hostname mountall: mount /media/shares [1402] terminated with status 1" I am writing this in Win 7 since I lost ubuntu. I am using ubuntu 11.04.
View 2 Replies View RelatedI just compiled my first own kernel (I'm using Arch Linux), following the tutorial on the german site. Now I tried to boot it, I ended up failing with this message: Code: Waiting 10 seconds for device /dev/sda1 ... Root device '/dev/sda1' doesn't exist, Attempting to create it. ERROR: Unable to determine major/minor number of root device '/dev/sda1' Here is the important part of my menu.lst:
[Code]....
I simply copy&pasted the Arch-entry, i.e. I also had the disk by uuid there. The failure message was the same, just the root device name was the different name Also, at first I did not have the initrd line in my menu.lst (as written in my tutorial that I may not need it). In this case I had this error message:
[Code]....
I'm trying to run a simple program in Ubuntu OS, Netbeans application but I cannot resolve the error message. Can someone please assist.
/usr/bin/make -f nbproject/Makefile-Debug.mk SUBPROJECTS= .build-conf
make[1]: Entering directory `/home/bee/NetBeansProjects/HelloWorld2'
/usr/bin/make -f nbproject/Makefile-Debug.mk dist/Debug/GNU-Linux-x86/helloworld2
[code]....
Well, now that I have Jack installed correctly I would like to see about setting up the patches, but when I start Patchage, I get this code...
So just wondering if I need to have Jack started before I open Patchage, or what else I may need to reconfigure.
I am trying to install ubuntu on my old laptops but dis message keep coming up on all code...
View 5 Replies View RelatedI am getting the same errors everytime I boot the server up:
Error: no such device {SOME-UUID}
Error: no suck disk
After that the system boots normally, but Im afraid ignoring this error can make my system crash in the future. I figured it was a grub error and I tried the update-grub2 command, it does detect all installed kernels no problem, but after I reboot I get the same error message.
I upgraded Ubuntu from version 10.04 to 10.10. When the upgrade completed I was asked to reboot. After reboot I simply got the message "error: file not found" on the screen. After a few seconds the machine rebooted.
I guess it is the boot loader that was not found. Is there some hope of fixing this problem?
When i open update manager i get an error, i have attached the screenshot of the error.
View 4 Replies View RelatedI get a "packagekit error" while using my pc. code...
View 9 Replies View RelatedI just installed say with
Code:
sudo apt-get install epos
and everything went fine, until I tried to use it.
When i do
Code:
say hello
it gives me
Quote:
he~lo######~T
Could not open localsound device, error 2 Client side error: Could not set up a stream
I upgraded from 9.10 to 10.04. Previously, I had a dual booting system where GRUB allowed me to boot 9.10 or WinXP. I have two hard drives - an 80 GB drive with XP and a 1 TB drive with Ubuntu.
During the upgrade I chose to upgrade my GRUB version. I only selected to install grub on the Ubuntu drive. I didn't work - I couldn't even get GRUB to load. It just gave the error: the symbol 'grub_puts_' not found.
So I reconfigured GRUB and installed it on both drives. Now GRUB loads and I can boot 10.04 just fine, but I can no longer boot XP.
What command should I run to give you a glimpse of my system? Would that help diagnose this?
I'm having a problem with this command: sudo yum update
I get the error: "Loaded plugins: presto refresh - packagekit
error:no such table: packages.
I created a group using vi /etc/sudoers
saved it using :wq!
but can't get it to work.
When I try to launch something from terminal, it shows this error.
gksudo gedit /etc/hosts
Quote:
127.0.0.1localhost
127.0.1.1matt-laptop
# The following lines are desirable for IPv6 capable hosts
::1 localhost ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts
My computer always had this name and I never had concerns related to his name. So, what's wrong now?
So I've tried some hours ago to install the new kernel 2.6.38 and when I did the reboot, it prompted this error: "Error 11: Unrecognize device strong
Press any key to continue..." I know this is such a general question but how to install the new kernel with Fedora 14? I think I did compiled and configured it ok and did something that wasn't recognized by grub or perhaps when I ran the command to make the new initrd.
I'm very new to Linux and have installed debian Lenny.
but I have met some problems. The biggerst one is that I cant start debian.
To be more exactly, debian freeze after i come to the loggin scean, I cant move the mouse and i cant wright.
You may say that this is hardwear error but its not, cus i can run grubs singel-user-mode and do whatever i want in the shell.
so my question is, how do i fix this from shell. I think maby I shld change something in xorg.conf but not sure what, and how.
I have just compiled apache with the following command code...
View 4 Replies View RelatedI am trying to send a message to a windows machine using smbclient have few questions
1. Do I need to have samba server running on the senders side for this to work smbclient -M -L sam (since there was some error popping up when I try to execute this with out samba service running part of the error is tdb(/var/cache/samba/unexpected.tdb):
rec_read bad magic 0x43414341 at offset=4652)
2. After I started the samba service I am getting fallowing message and error
I tried both name smbclient -M -L sam and the IP smbclient -M -I 192.168.11.12
added interface ip=192.168.11.20 bcast=192.168.11.255 nmask=255.255.255.0
Cannot resolve name -L#0x3
I have a strange problem with using curl function in php on slackware machines. So far I tested this on 2 PCs. I din't test it on any other distributions, so I don't know if it's only slackware problem.
Problem is that I can't use php curl in normal way. It can be tested wit simple code:
Code:
$ch = curl_init("url");
$content = curl_exec($ch);
if (curl_error($ch)) {
echo(curl_error($ch) . "<br>");
}
echo($content);
When I'm opening this php script in browser I'm getting error message:
Code:
Couldn't resolve host 'google.lv'
but I can use curl command in terminal, also it works when I run this php script in terminal like:
Code:
php ./curl_test.php
So problem is not in curl or php itself, but in apache, because this happens only when this script is running in apache.
Searching google a lot, I got to conclusion that apache can't read /etc/resolve.conf file during startup. Strange thing is that it happens only when httpd starts during system startup, but if I'm stopping httpd and starting it again manually, it works as it should until I'll reboot my PC. Restarting httpd also do not work, I need to do start -> stop.
I think that apache reads /etc/resolve.conf only when it starting up and as I have DHCP, maybe network is still not ready at the moment of httpd startup.
I didn't try to configure php as php-cgi instead of apache module, I think then it would work normally because each php script would be separate process and it would read dns information each time, so the same like starting php script in terminal with command:
Code:
php ./curl_test.php
I think there are some ways to workaround it, e.g. delay somehow start of httpd during system startup, or something like that, but I want to find reason of this problem and make it work without any workaround.
i get the following error when i try to install autoten: root@Tex dan]# rpm -Uvh [URL]... curl: (6) Couldn't resolve host 'dnmouse.org'
error: skipping [URL]... - transfer failed from reading other posts, it sounds like a dns error, but i don't know what to do to fix it.
I am trying to mount a NAS device using the hostname on my linux computer (running slax)
The command I am using is
mount //hostname/sharename /mnt/test -t smbfs -o username=***,password=***
i am getting back the error
mount error: could not find target server. TCP name hostname/sharename not found
No ip address specificed and hostname not found
I can do this mount from an older version of SLAX but i can't from this new version. smb:/ can find then through the file explorer window but I can't mount them from the command line.Is there something i am doing wrong?
I'm getting a bit tierd of linux right now.. I can't get the CD, with netinstall on, to start.
I've tried different harddrives and burned it several times at different speed and so on. I've tried to just i386 and amd64, both gives the same error:
isolinux: Disk error 32, AX = 42B0, driver 9F
The harddrives that I got is small 10-80 gb, so they are a bit old.. but they worked the last time I've tried to install (until I got a grub loading error)
I'm not sure what to do at all. Tried to search on google and here without finding something
Any attempt to load a webpage gives a Cannot Resolve Hostname error. i can ping [URL], but cannot load the page. However, the page will load by typing its IP address [URL] I have been trying to figure this out for days. cat /etc/resolv.conf nameserver 192.168.1.254
View 9 Replies View RelatedI m running Fedora 15 i386 release and just performed an update for packages.
Code:
yum update
The PAE kernel and Nvidia driver got updated as well as a few other packages.
When I come to playing a video with Xine I get this error code...
When I type xlock and press return key, I am getting the following error:
Unknown mode: xlock: bad command line option "swarm"
What should I do? I just need the basic xlock screen locking functionality.
I have fedora version 8 with mysql 5.0.45 installed. I have also installed drupal. Recently drupal gave me an error "error code 28". When i checked it out it seemed to be with the db. When i tried to created a db (for testing purposes) in root...i wasn't able to. so then i tried to restart mysql ...it stopped but unfortunately i have not been able to get mysql back up...i get a message saying
"Timeout error occurred trying to start MySql Daemon".
I'm trying to update my Ubuntu 10.04 to 10.10... But I get this error message:pkgProblemResolver:Resolve generated breaks, this may be caused by held packages
I tried to disable all the repositories, and also "sudo apt-get -f"... But still having this error message...
I'm currently running 11.3 and decided I'd try upgrading to 11.4 following the instructions here: SDB:System upgrade - openSUSEUnfortunately, my attempts are defeated at the point of trying to refresh the new repos; I get the following message (for the oss repo, in this case):
Download (curl) error for 'url':
Error code: Connection failed
Error message: Couldn't resolve host 'download.opensuse.org'
With 11.4 replaced by 11.3 in the repo url, it refreshes just fine. The only repository that works when I change 11.3 to 11.4 is the Packman repo. I'm not really sure why the connection fails for 11.4 but not 11.3!
Further info: I have an old router with no IPv6 support, but have IPv6 disabled system-wide. I can enter the url for the repositories into firefox and they come up just fine - it's only with zypper/YaST that I get the above error message.I also tried upgrading using the network CD but ran into the same sort of problem. In this case it may be because the CD installer doesn't disable IPv6. (I didn't want to download the DVD at my connection speed, and the KDE live CD is not listed as suitable for upgrade).
I decided to go ahead and try out Ubuntu for the first time (never used a Linux OS before) ...it hasn't gone well to say the least. I downloaded the wubi installer and installed the netbook version of Ubuntu (10.04). It was installed on my Samsung NC10, where Windows XP installed on a small partition and program files were kept on the other larger partition. Ubuntu was installed onto the larger partition. After booting into Ubuntu there were some updates which came up, so I went ahead and and let it update... after that it needed to restart -- and from there things have never been the same I now get a "Error: no such device <enter some random letters and numbers here>" error.
I tried googling the solution but haven't managed to get anything to work. I put Ubuntu onto a USB and so I can get into that "live" Ubuntu; I've tried all sorts of strange and meaningless (to me, anyway) commands in Terminal... nothing has worked. I even went into the drive and deleted Ubuntu thinking that perhaps that would stop it trying to load Ubuntu but that didn't work either -- probably not a good move, but I'm desperate. Right now, I'd be quite happy to just fix Windows and forget about Ubuntu. I really need to get this sorted within the next 3 hours before Uni.