Ubuntu :: GRUB After Seagate FreeAgent Drive Was Used - PC Restart Itself
Mar 1, 2010
I have a dual boot PC with Windows Vista and Ubuntu 9.1. The problem did start with Ubuntu 9.04. I think the problem started around the same time I added a Seagate FreeAgent USB hard drive for backups. The GRUB OS list will come up after the PC boots. I can select Vista and it will start w/o a problem. If I try to boot to Ubuntu the PC will restart itself. It may try and start Ubuntu MANY times until it eventually gets started. I have tried to repair the problem with no results so far. I have tried it with and without the Seagate device attached.
[Code]....
View 3 Replies
ADVERTISEMENT
May 31, 2010
I've searched around and found a lot of reports of people's FreeAgent drives randomly spinning down (and what to do about it), or for people who can see the drive but can't mount it. I have a different problem: I can't see the drive at all. I plug it in, andit makes a beeping noise for a while (think 'Defcon 4', but not as loud). Then, it stops, but nothing's happened. fdisk -l just shows my normal 4 partitions.I'm running Ubuntu (Karmic), and this is a 500 GB FreeAgent GO drive from Seagate (brand new, right out-of-the-box).
View 3 Replies
View Related
Mar 31, 2011
I have a 3 year old Seagate Freeagent 80Gb harddisk and after installing Opensuse 11.4 yesterday would like to copy my backup documents into the laptop. So I plugged in both power usb cables to the laptop and it seems to be detected by the OS, but being a newbie to linux I do not know how to read the contents of my drive which is formatted in NTFS. Is it because of the NTFS that's why the harddisk does not show up?
I did a quick google and here is what I get while trying to dig for more info:
putsomenamehere@linux-c38c:~> lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
[Code]....
View 3 Replies
View Related
Mar 7, 2010
I have a Seagate Freedesk external drive. I formatted it to ext3 (as per several posts regarding this)However I cannot mount the drive. If I go "places" "computer" I can see the drive (simply entitled USB Drive) but if I try to open it it says "cannot mount the drive". If I right click and select "Mount Volume" I get Nothing. How can I get this to auto mount like other usb drives? I am using Hardy on a Compaq Laptop.
View 3 Replies
View Related
Jan 20, 2011
Alright, im completely new to linux. I am somewhat knowledgeable with computers in general. My programming instructor for school told us that it would be in our best interest of the course to grab a linux distro and install it on our computers. (Don't ask me why, i dont know)ANYWAY, i am trying to get debian to install on my external USB 1.5TB Seagate HDD Drive. After learning a lot about Murphy's Law, i had to fix my MBR for windows (the windows installation is located on my internal SATA 1.5TB Seagate Drive) because GRUB wouldnt boot to windows unless i had my external plugged in.
So, the natural solution to me was to fix the MBR, unplug the internal, then re-install on my external, it worked. Well to my surprise, this cloud i was on... wasn't cloud 9. NOW, Debian will boot if i have the external plugged in and windows will boot if i have the internal plugged in. The Problem is, when i have both plugged in and my external set as the boot drive i get this weird error and it will not let me boot linux.Now, i have searched for a fix.. But the ones i have tried so far haven't worked or i wasn't sure how to use those fixes(because im new).The error went as follows:/bin/sh can't access tty; job control mode offthen i get a initramfs command line. (I think thats proper terminology)The temporary fix i have going right now is i have my computer open and the SATA cable unplugged so i can boot to Debian.
SUMMARY OF HARDWARE SPECS:1.5 TB INTERNAL HDD (SATA)2 INTERNAL DVD BURNERS3 GIGs of RAM2.8ghz AMD Athlon x2 (I think its 2.EXTERNAL 1.5TB HDDDEBIAN VERSION:I believe its Debian 507 by looking at the download linkhttp://cdimage.debian.org/debian-cd/5.0 ... etinst.iso
View 13 Replies
View Related
Apr 5, 2010
I'm looking at getting a Seagate Barracuda LP 2TB drive for my HTPC. However I was initially looking at the WD Cavier Green due to it's power saving features. Upon finding out about the Green's problems interacting with the Linux Kernel I have ditched the idea of getting a WD.
Does the Barracuda suffer from similar problems as the Cavier Green.Are there any problems at all with the drive and the kernel not playing nice together? Do I need to set anything in the kernel config to help enable power saving features of the drive so that when the PC is not in use the drive uses as little power as possible?
View 1 Replies
View Related
Feb 8, 2011
I was trying to reformat my Seagate external hard drive and I selected "free Space," in disk utility not realizing that the computer would no longer recognize the device. I'm trying to install Snow Leopard on it so now how do I format it now to the GUID format? I luckily backed up the entire contents of the hard drive (The essential files on it), but what do I do now that the computer doesen't recognize it!?
View 9 Replies
View Related
Jun 25, 2010
by default fedora 13 mounts the drive under /media/uuid, with no read or write access to users other than root. I need to be able to turn the drive on, have it automount so that I can read and write to it without logging in as root every time and dealing with changing permissions on files, etc.
In other distributions, this has worked flawlessly, but I'm not familiar enough with Fedora 13 yet to get it working. I've read the man pages, tried to search, but I can't seem to find a working answer,If I could get this one little inconvenience fixed, I'd be set... loving Fedora so far.
View 2 Replies
View Related
Dec 21, 2010
I plugged in a seagate expansion drive 1Tb into my linux server for backup purposes but it is unable to mount it. I can see the expansion drive in My computer but when I click on it, it says unable to mount, device already mounted or busy. Windows can read the hard disk with no problems. It is ntfs formatted. I installed ntfs kernel and fuse. Ntfs is displayed when I run cat /proc/filesystems. However it just can't mount the expansion drive.
View 7 Replies
View Related
Mar 31, 2011
I have been a Linux user for about 6 years now, and recently switched to Fedora just to try something new. I used Ubuntu for the majority of the time so I am somewhat familiar with the command line, but seem to be having trouble with my external HDD. Ubuntu automounted it no problem. Fedora doesn't seem to like to do that. I tried searching and I did what almost every thread insisted upon; which is mount /dev/sdb(that is what dmesg said) but it says already mounted or /mnt/busy. So this is the extent of my Terminal experience with mounting an external drive, and I am completely dumbfounded as to why it simply won't mount. I am liking Fedora so far and so long as there is a remedy for this I don't plan on going back.
View 3 Replies
View Related
Jun 30, 2011
I have a 2TB Seagate GoFlex Desk External HDD. I want to format it. Which is the best disk format, which will be supported in all OS, like Windows, Linux and Mac?
View 2 Replies
View Related
Jun 15, 2011
I have a 1TB usb External Hard drive (Segate), I would like to install linx on that drive. I tried red Hat it does not find hard drive. I run open suse, I partition the hard drive. After installation of disk 1 it reboots, at that point it does not go to usb external drive.
View 3 Replies
View Related
Oct 21, 2010
it says cant mount volume and wont recognize my seagate expansion drive after I had the seagate plugged in to a windows pc! It says something about using command line to fix it but I'm new to Linux and don't know what to do!
View 1 Replies
View Related
Dec 4, 2010
just bought an adaptec 39160 PCI scsi controller and 34Gb drive and installed it on my computer.When i Booted it up a utility thing ran which said 'detecting array' and it found the drive and its size etc. it didn't go any further to allow my system to boot, so I rebooted and pressed CTRL + A to enter the adaptec scsi config. I changed something in there to make the disk non bootable (i Think) and rebooted the system.
It now hangs at :
'Detecting Array .....'
and does not show the drive details or the CTRL + A option to enter the utilities. So the only option I have had is to remove the adaptec controller ( and the system boots fine) the mother board is an Abit an8 ultra - probably about 4 years old and cpu is amd 64 I guess i have broken it and my remedy would be to reset the default options on the adaptec controller, but you can probably guess I have v. limited knowledge and have not used scsi before.
View 1 Replies
View Related
Jul 13, 2011
I purchased a Seagate Goflex 500GB external hard drive yesterday and tried to connect it with my Fedora machine. Unfortunately my machine could not mount the drive. I have never had such problems earlier with other USB drives.PLease, how to use this ext disk on the fedora machine.
View 7 Replies
View Related
Sep 23, 2010
i have centos Linux server running with kernel version 2.6.18-164.el5 and release is CentOS release 5.4 (Final). The problem is when i connect external harddrive which is seaget free agent to this box, it doesnot detect . fdisk -l doesnot show any such partition.
View 3 Replies
View Related
Mar 13, 2011
Just attempted to upgrade from 10.04 to 10.10, after having updated everything. Upon completion of the upgrade I was asked to restart, however, when I restarted the PC I was presented with the following:
GNU GRUB version 1.98+20100804-5ubuntu3
Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists possible device or file completions.
View 2 Replies
View Related
Dec 18, 2010
I've been working with ubuntu now for quite some time. My computer loads grub fine on a cold state boot. It loads fine on my 3 linux based systems when they restart. It gives me a grub 21 error when I choose restart in windows 7. I'm forced to press the power button, and turn it back on- not a huge deal, as its a 100% fix. I'm already booting with rootnoverify, and have checked the command on boot to make sure it was the right grub menu that was installed. I also couldn't find a topic with a problem like this, most were just grub not working at all after install or similar.
View 2 Replies
View Related
Jan 6, 2010
This is the error message i get. Keep in mind I am running KUbuntu 9.04, after an upgrade from 8.10.
Code:
View 5 Replies
View Related
Jun 18, 2011
I've been running Ubuntu 10.04 for a while now on my 500 gb external hard drive, and for the most part I've had little to no problems I couldn't fix with a little common sense. However, recently my computer was taking an unusually long time to boot up, so I restarted, which normally works just fine, but just as I restarted the system had begun to boot. Now when I boot I get the following:
Code:
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /sys on /root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or directory
Target filesystem doesn't have /sbin/init.
[Code]....
I haven't tried an Ubuntu LiveCD, because I lost mine (making a new one is difficult with our current internet connection) and I feel I would get the same results. At the very least, I would like to be able to get all my music, videos, etc. off the drive, but I would prefer being able to fix it completely so as not to have to buy a new one.
View 3 Replies
View Related
Feb 6, 2010
I just installed Ubuntu 9.10 on hd1 - /dev/sdb1 at the end of the installation I chose to install grub at hd0 - /dev/sda1. The file system I chose was ext4 for ubuntu "/" - 50 GB,
ext3 for "/home" - 5 GB, and 1.5 more for swap. When the installation was complete I got the following prompt:
GRUB loading
error: no such disk
grub rescue>
>
There was nothing I could do, pressing TAB did not show me all the commands like grub is expected to. Typing 'help' did not show any commands as well, instead it showed me - "NO SUCH COMMAND" or something like that (I did not took note of what the output was). I believe the problem is in the grub loader - which was not really installed properly in hd0 - /dev/sda1 (which is FAT32 - windows)
View 9 Replies
View Related
Apr 11, 2010
i was working on ubuntu when the machine suddenly shutdown. when i restarted it, i keep getting a sh:grub console instead of the logon screen. dunno what to do.
View 3 Replies
View Related
Sep 14, 2010
I had Ubuntu 10.04 on my 500GB Samsung drive. Today it suddenly stopped responding, not only X11 but the whole system (Ctrl + alt + f1 didn't worked either) so I had to force restart it. Since then, I can't boot it again - right after memory test and general motherboard splash, the white line cursor goes about 3 lines down of topline and stops there. After about 5 minutes there's still no GRUB menu. Finally I had reinstalled the system (which is not really much pain since my "home" was on other partition than the system, but it didn't helped - still the same. On the other hand, booting USB Live works perfectly fine (I'm using it right now). I have an access to all the partitions, all the data seems to be there, SMART utility says the hdd is healthy ..
Oh, and I tried reinstalling with grub-reinstall before, it said that the reinstallation went fine but didn't helped either
View 8 Replies
View Related
Jan 15, 2010
I run Ubuntu and yesterday the update manager downloaded a new kernel I think. It asked me to restart. I unlike before where when I select Ubuntu at boot up time and it just goes into it I am getting this black screen called GNU GRUB. What do I do here? Has Linux got corrupted by the updates I downloaded?
View 1 Replies
View Related
Jun 23, 2010
I tried to install Ubuntu as a dual-boot on my Windows XP machine, using the USB stick trial OS and automatic installation. My screw-up came when I left my external USB hard drive plugged in during the install, and as far as I can tell, Ubuntu was installed on that as opposed to my internal HD. Now when I try to boot, I get knocked straight to the grub rescue prompt with an error message that basically shows my "no such device (my external's ID)" -- assuming that the MBR (which I know nothing about editing) is trying to boot off the external that isn't actually enabled until an OS starts it up, and dumping me at the rescue prompt when it can't find it.
I can still load up the trial Ubuntu off the original USB stick (though can't get online with it without wireless drivers), but that's as functional as the computer gets right now. And I don't have a Windows Setup CD anywhere (using a rooommate's Mac at the moment with a terrible European keyboard on it). So is there any way to edit the MBR or something to tell it to boot my regular XP off my internal HD, at which point I can re-partrition and try this whole thing again, or otherwise remove the failed install of Ubuntu through the trial-stick or... well, I'll leave the suggestions up to you all. I've been working on this since about 4am last night and my brain is kind of fried.
View 3 Replies
View Related
Aug 2, 2010
After lots of searching last night I noticed that over the last couple of days there have been quite a few posts of people receiving the error: no such device lots of numbers grub rescue>. I have a dual boot vista/ubuntu setup with ubuntu on my d: drive and windows on my c: drive and it happened to me last night. So after my freaking out when I received the grub rescue> error after updating somethings in my ubuntu install and restarting. Once the computer rebooted bam! error. after much freaking it only fixed itself by reinstalling the windows bootloader via the vista rescue disk I was wondering if there was a way to prevent this from happening again? will ubuntu attempt to "update" itself again?
View 5 Replies
View Related
Feb 12, 2011
I have two partitions installed on my computer, Ubuntu 10.04 (part. sda2) and Windows XP (part. sda1). When I restart my computer I get this message:
error: file not found
grub rescue>
I thought this must be a grub error, so I booteda Super Grub disk (v 0.9799). Then I tried to fix grub with the Super Grub disk, but I got this message:
Error 15: File not found
Booting 'not lucky'
pause SGD has NOT succeeded
SGD has NOT succeeded
I then booted the system using an Ubuntu live CD, version 10.04.I tried to repair the sda2 Ubuntu partition. At a terminal prompt I ran [code] sudo e2fsck -f -y -v /dev/sda2. This did not work. It ended with "e2fsck aborted". I could not repair the Ubuntu partition,
I tried to open the sda2 partition by running the terminal command [code] sudo mount /dev/sda2 /mnt. I received the following message:
mount: wrong fs type, bad option, bad superblock on /dev/sda2
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
Using the ntfs-config program, I can easily mount the Windows XP partition (sda1). It mounts and I can read or write the files on the Windows XP partition. So at least Windows XP is not damaged. I downloaded and ran the boot info script, and here are the results:
Code:
Boot Info Script 0.55 dated February 15th, 2010
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #2 for /boot/grub .....
View 9 Replies
View Related
Jan 31, 2010
I've trawled the internet but can't seem to find the exact same issue, so I've made a new thread. So, I installed Ubuntu onto a 160gb drive. I have other drives in the system, but I disconnected them so that the system drive would be sda. Ubuntu installed perfectly with no issues whatsoever. I connected the other drives in the system, and again it booted up perfectly (although I can't remember whether the 160gb drive remained as sda or became sdd). Then I attached some extra drives temporarily to do some data shuffling.
This moved my system drive to become sdf. My computer booted fine multiple times like this, but when I was finished with the drives I rebooted and suddenly everything broke. For some reason my ubuntu installation showed up in the GRUB twice, and neither of them booted. So, I popped in the Live CD (which I'm using to type this post), and decided to update the grub. I chrooted into my system drive and ran update-grub, but it simply returned something like this:
[Code]....
View 7 Replies
View Related
Aug 27, 2010
when it comes to linux, but like the idea and hope one day to get away from microsoft all together. This is the second time I have tried to install ubuntu on my eeepc 1000HG in addition to windows 7. The first version was karmic koala netbook remix, and yesterday it was lucid lynx netbook remix. Its annoying because before the update packages are downloaded and installed it runs smoothly, even additional applications run with no problem, but after restart to complete installation the following error message appears.
error: no such device: 5290ea6f-1bdf-4eda-b56e-2f282662e188. grub rescue>
View 9 Replies
View Related
Apr 26, 2011
I downloaded Ubuntu 10.10 onto my external hard drive yesterday for use in an dead laptop. Hard drive on the laptop is dead and has no operating system. Downloaded the iso for 10.10, as well as the Universal USB Installer. Everything went well, and Ubuntu started up and loaded onto the laptop. I was so thrilled to have my old laptop working again! (it's much better than the netbook I'm on right now)
Restarted Ubuntu after creating a partition on my external hard drive, and it wouldn't restart. So, I went back to my netbook and reformatted the hard drive to factory specs, and started the process over again. Now, when I try to boot the old laptop from the hard drive I get a message that says, "Multiple Active Partitions" and it won't boot from the external hard drive.
View 2 Replies
View Related
