I have a 1TB usb External Hard drive (Segate), I would like to install linx on that drive. I tried red Hat it does not find hard drive. I run open suse, I partition the hard drive. After installation of disk 1 it reboots, at that point it does not go to usb external drive.
View 3 RepliesI have been a Linux user for about 6 years now, and recently switched to Fedora just to try something new. I used Ubuntu for the majority of the time so I am somewhat familiar with the command line, but seem to be having trouble with my external HDD. Ubuntu automounted it no problem. Fedora doesn't seem to like to do that. I tried searching and I did what almost every thread insisted upon; which is mount /dev/sdb(that is what dmesg said) but it says already mounted or /mnt/busy. So this is the extent of my Terminal experience with mounting an external drive, and I am completely dumbfounded as to why it simply won't mount. I am liking Fedora so far and so long as there is a remedy for this I don't plan on going back.
View 3 Replies View RelatedI was trying to reformat my Seagate external hard drive and I selected "free Space," in disk utility not realizing that the computer would no longer recognize the device. I'm trying to install Snow Leopard on it so now how do I format it now to the GUID format? I luckily backed up the entire contents of the hard drive (The essential files on it), but what do I do now that the computer doesen't recognize it!?
View 9 Replies View RelatedI purchased a Seagate Goflex 500GB external hard drive yesterday and tried to connect it with my Fedora machine. Unfortunately my machine could not mount the drive. I have never had such problems earlier with other USB drives.PLease, how to use this ext disk on the fedora machine.
View 7 Replies View RelatedAlright, im completely new to linux. I am somewhat knowledgeable with computers in general. My programming instructor for school told us that it would be in our best interest of the course to grab a linux distro and install it on our computers. (Don't ask me why, i dont know)ANYWAY, i am trying to get debian to install on my external USB 1.5TB Seagate HDD Drive. After learning a lot about Murphy's Law, i had to fix my MBR for windows (the windows installation is located on my internal SATA 1.5TB Seagate Drive) because GRUB wouldnt boot to windows unless i had my external plugged in.
So, the natural solution to me was to fix the MBR, unplug the internal, then re-install on my external, it worked. Well to my surprise, this cloud i was on... wasn't cloud 9. NOW, Debian will boot if i have the external plugged in and windows will boot if i have the internal plugged in. The Problem is, when i have both plugged in and my external set as the boot drive i get this weird error and it will not let me boot linux.Now, i have searched for a fix.. But the ones i have tried so far haven't worked or i wasn't sure how to use those fixes(because im new).The error went as follows:/bin/sh can't access tty; job control mode offthen i get a initramfs command line. (I think thats proper terminology)The temporary fix i have going right now is i have my computer open and the SATA cable unplugged so i can boot to Debian.
SUMMARY OF HARDWARE SPECS:1.5 TB INTERNAL HDD (SATA)2 INTERNAL DVD BURNERS3 GIGs of RAM2.8ghz AMD Athlon x2 (I think its 2.EXTERNAL 1.5TB HDDDEBIAN VERSION:I believe its Debian 507 by looking at the download linkhttp://cdimage.debian.org/debian-cd/5.0 ... etinst.iso
I just plugged in a 698GB external hard drive into my computer and ran Xubuntu. But it doesn't show up on the desktop. I am new to this OS, where can I find it? I would like to make some backups.
View 5 Replies View RelatedI have a Seagate Freedesk external drive. I formatted it to ext3 (as per several posts regarding this)However I cannot mount the drive. If I go "places" "computer" I can see the drive (simply entitled USB Drive) but if I try to open it it says "cannot mount the drive". If I right click and select "Mount Volume" I get Nothing. How can I get this to auto mount like other usb drives? I am using Hardy on a Compaq Laptop.
View 3 Replies View RelatedIn Ubuntu 10.04 all I had to do was turn on my external hard drive and it would automatically be detected and mounted. I just switched over to Ultimate Edition, which I think is Ubuntu 10.04 with a lot of stuff added on to it. The funny thing is when I turn on the external hard drive it doesn't get mounted, and I don't think it's even being detected. I looked in gparted and it doesn't show up there. If I boot into Ubuntu 10.04 and turn on the hard drive it still gets detected and mounted, so there's nothing wrong with it. Ultimate Edition can detect other things connected to USB, like my iPod, so I'm wondering why it can't detect my hard drive.
Edit: When I do tail -f /var/log/messages and if the drive gets detected, this is what it says:
[ 230.520892] usb 1-2.4: new high speed USB device using ehci_hcd and address 6
[ 230.639400] usb 1-2.4: configuration #1 chosen from 1 choice
[ 230.639717] scsi9 : SCSI emulation for USB Mass Storage devices
[ 235.631550] scsi 9:0:0:0: Direct-Access Maxtor OneTouch 0122 PQ: 0 ANSI: 4
[Code]....
I've got this hard drive that I know that is formatted to either ext3 or ext4, but I want to find out which format it is. I'm unfamiliar with many commands, I tried 'fdisk -l' but it didn't yield any useful information to me. Is there a command wherein I can easily find out the format of disks?
View 3 Replies View RelatedI have a 2TB Seagate GoFlex Desk External HDD. I want to format it. Which is the best disk format, which will be supported in all OS, like Windows, Linux and Mac?
View 2 Replies View RelatedI have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
a friend of mine just given me an old 2004 IBM NetVista 8305 desktop and suggested to use Linux Ubuntu which is something new to me. So i installed it via USB memory stick & it works. After installation of the OS I am impressed with functionality & speed. when i conect the external hard drive via usb it doesn't show & i tried my usb flash disc it showed the same problem. I tried both disk in my laptop (Windows XP) & it works.
View 8 Replies View RelatedI had this corrupted external hdd and so I formatted the main partition on it on windows but messed up in the formatting and ended up having to format the entire thing. I got some weird message about it not being initialized (no not mounted) so I was in compmgmt.msc in windows and right clicked it in device manager and it asked for master boot or GUID I selected the latter and formatted. Worked fine and all for a bit but now it doesn't show up as a drive. I noticed when using compmgmt.msc it showed up that it had installed driver software and was being recognized but in the partition editing area there was nothing on this drive, reinstalling driver software doesn't seem to help. Also GParted wont load up when I have it plugged in and Disk Utility doesn't show it. I am requesting help to fix this problem within Ubuntu 10.10 somehow so I can use it properly.
View 9 Replies View RelatedWhen I try to install 10.4 on my hard drive, I get all the way to the "Prepare Partitions" menu and there are no disks listed and all button are grayed out. I am installing on an EVGA X58 motherboard with Intel ICH10 and I have AHCI enabled. Does Ubuntu support AHCI? Do I need drivers to install?
View 3 Replies View RelatedI got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
View 2 Replies View RelatedHoping to retrieve data from my normal hard drive, which has spontaneously decided to make the root directory unreadable start from a bootable CD (9.10), and I can at least see the (remains of?) the 247 Gb file system.But I can't see my USB external hard drive, though judging by the power indicator the USB port itself is OK.
Is there some special trick I need to carry out to make the external drive visible as a storage device so I can start rescuing files? and (apart from take a backup the day before) any tips on persuading data out of "unreadable" folders?
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
View 6 Replies View RelatedI recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code:
sundar@sundar-sundar:~$ fdisk -l
Disk /dev/sda: 120.0 GB, 120034123776 bytes
[code]...
I have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
View 13 Replies View RelatedI would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
View 2 Replies View RelatedI have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
View 1 Replies View RelatedI've have been playing around mounting ISO movies, and found that my external HDDs now won't mount. I run UBUNTU Lucid Lynx, and want to change distros, but need to put everything to my external drives before that change.
View 11 Replies View RelatedHow could I get the Slackware Linux distro on my external HDD booted up from my notebook? I'm using a notebook bought in 2006, the configuration is 60GB HDD, 940gml chip, 2GB memory, 1.6GHz Celeron-D CPU. I bought a USB2.0 3.5inch 1TB "Seagate Expansion External Drive". The file system of the only partition on it is NTFS. I installed Grub MBR on the external HDD using grubinst then copy the grldr, grub.exe and menu.lst to it, added Slax to the only partition, then I could get Slax booting up. However, the external HDD could only get booting up when my notebook is first power on; if I reboot it, the external HDD would auto turn off and on when sef-checking and cannot be shown in the Esc boot menu. I tried to install Slackware 13.1 to the external HDD successfully but failed to boot. I used WinPM to resize the primary partition to make about 60GB space at the end of the disk for Linux distro.
I booted the Slackware USB image from Grub4DOS, and ran cfdisk to make partitions from the 60GB space for Linux, ran setup to install Slackware. Then at the step of the lilo bootloader configure, if I select to install the lilo in MBR, it would fail to boot, displaying "L..."; if I select to install the lilo in the super block of the "root" partition then boot from grub, it would fail too, because I found that there is no way to mount the Linux partitions of the external HDD in the grub cmd line. When I say "root (hd0,4)", it would halt without any prompt. If I say "root (hd0," then press the Tab key, instead of listing the partitions on hd0, it would halt too. If I set the root partition of the Linux install as the second primary partition and install Slackware distro to it, the grub would show error either saying it cannot recorgnize the ext4 file system(ext4 fs, sda2) or unable to mount selected partition(ext2 fs).
if I try to install a linux distro on an external hard drive, while I have windows XP on my primary, will the Linux stlil install a Grub on the Windows MBR. Or have I got that wrong.
View 2 Replies View RelatedI have AMD athlon 64 processor, Seagate 160GB SATA Hard Disk, ASUS A8VMX mother board.With this configuration, I can Install FC7 without any error. But all the latest releases after FC7 is not detecting my Hard disk. Is there any solution to solve this problem? Actually I'm searching for a solution when the FC8 released. Now I have all the later releases from FC8 to FC11 DVD except FC9. But none is working .
View 1 Replies View RelatedAssume I have plugged in an external USB hard disc.
How can I find out (from terminal cmdline) the file system (ext2, ext3, reiserfs,...) of this hard disc?
From Ubuntu I know the two commands:
sudo blkid -c /dev/null
or
sudo fdisk -l
but these are not known in CentOS.
What are the corresponding cmds in CentOS?
I have a new install of debian on my laptop. When I plug in my external hard drive (usb) I get the message. Invalid mount option when attempting to mount the volume 'External Drive'.
View 7 Replies View RelatedI have windows on my box, I have fedora 14 on my external that goes through my usb. Grub is installed on my usb. Since the only thing stored on my external was fedora i really didn't have to do much to it. just go into bios and boot from usb. Now that im using fedora more, Id like to add Vista to my choices. I guess the numbers change once your using an external drive. Ive read some of the problems like mine but they didn't quite do it. Im going to inclose 2 screen shots of my drives/partitions and my grub.conf.
# grub.conf generated by anaconda
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
[code]....
I have Red Hat Enterprise Linux 6 installed on my machine. I am unable to mount an External Hard (NTFS). I have tried several options which are as under:
Option 1:After making a dir /media/windows mount /dev/sda1 /media/windows/ -t ntfs -o nls=utf8,umask=0222
Option 2: mount -t ntfs /dev/sdb1 /media/windows