Something went wrong during my upgrade, and i was unable to boot. What I did to save the day was to install Lucid parallel (on an other partition). Now I just want to double-check before I mess up again - I've backup-ed all the stuff i wanna keep and want to format the old partition. preferably I'd like to extend my current partition to the whole drive (or just make an empty partition for media if that works). So how do I do this the easiest way, and what would be the best option (i.e. 1 or 2 partts.)?
Is there any way to partition off say 40GB of a 250GB drive (only 5GB used) into an NTFS partition to install windows Vista SP1?? I have tried the System -> administration -> disk utility, but I can not figure out how to partition in it.
After installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-
[Code]....
Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-
[Code]....
But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off
Ive got two partitions of xubuntu installed and I only want one. Is there I way I can just delete the one i dont want and use that extra space for the other?
also, how would i know which is which when deleting?
I made a new partition on my hard drive, and installed Windows XP on it. However, because of space shortage on the disc (didn't bring my external HDD's with me) I could not "afford" to make the partition bigger than about 7GB. Turns out that's not quite enough. So I thought I'd try to resize the partition. Booted from my Ubuntu LiveCD and entered the partition manager. I'm able to tell the program that I want to resize the Linux-partition (so it sets the now freed space as "unused", but when I chose to "resize/move" on the XP-partition I do not have any free space. Does this mean that I have to resize the Linux-partition (until now I didn't actually resize it, only set the job as "pending" hoping that I could select both to shrink the Linux-partition and extend the XP-partition in one session), or do I have to format the XP-partition and make a new one (larger this time), then reinstall XP?
I am using CentOS 5.4 dvd to install. What I need is to be able to create a partition with GUI (it's druid, maybe) without formatting it. I remeber once there was a check into creating new partition form, but maybe i am confusing with fedora or other distros. Is there a way to complete job using GUI or should i create partitions: / /boot and swap with GUI and the others with fdsik?
I didn't know how to Make a cd image out of the Ubuntu iso so I made a seperate partition in my drive.Now I'm wondering how to delete the windows partition without formatting the whole hard drive.how to create a bootable cd image
I'm trying to install Ubuntu 10.10 on a brand new 500GB hard drive I just purchased and installed in my machine. I boot from the CD and instruct Ubuntu to install to this drive and tell it to "erase and use the entire disk" for this 500GB drive. After moving forward from that, I see it saying a message about creating an ext4 partition for root "/" and then shortly after the entire install dialogue goes away. All I am left with is the little circle cursors spinning round (mouse input still works) and the installation background. The HDD activity light was still on though. I gave it about 3 hours before I finally gave up and tried again.
When I tried again, I saw that it did create two partitions (root and swap) during the last attempt. The same thing happened, although now even mouse input isn't responding so my system is completely locked up. HDD activity remains active this time as well. Running Ubuntu from the CD works fine. The only problem I saw with it was when I ran gparted from the CD and tried to manually create a ext3 partition on my new disk drive. When I tried that, I ran into a similar occurrence (couldn't run any programs, eventually system locked up) and had to reboot.
I have a second hard disk but I have a lot of valuable data on that and don't want to mess around with it. It could be a hardware failure, but that seems unlikely to me as this is a brand new Seagate disk drive. I suppose I could try installing it on a spare partition on my other drive and see what happens, but other than that I'm out of ideas.
I formatted 56 GBs of my hard disk space into fat32 and it seems that 27 gbs of it is used! Though direct checking from the volume itself shows nothing like this, gparted still insists 27 gbs are used.
Sometimes it does this and other times it does not. It has happened with 2 hard drives. When it formats the partition the bar stops and the mouse pointer graphics stops.
I want to install Fedora KDE spin on an existing XFS partition without formatting it. (Since said partition is full of my data that I have nowhere else to put). But the installer doesn't allow me to set the partition as / without formatting. XFS is not one of the filesystems listed as options for formatting. How can I make Fedora do what I want?
I'm a big fan of the NSLU2-Linux project so I've been doing some developments for this platform for the last three years. In order for the end users to test my applications, I initially created an USB image with everything bundled into it. Then, they only had to download the image and decompress (dd) it into an USB pendrive with capacity equal or greater than 4 GB. The fact is that this has brought me lots of problems in the practice since my Web server hardly accepts long file transfers.
Moreover, flash spaces beyond 4GB are wasted. As result, I'm now considering a different approach as I don't know how to do it. Well, I've thought that I could maybe create an USB disk image only with the root file system partition. Then, the first time a script runs, it creates a home partition and formats it into the rest of the space available in the pendrive. There is maybe some command-line alternative to fdisk without having the user to interact during the format process... ??
So I recently installed openSUSE KDE (latest build, don't know the number?). total linux noob, been a windows user all my life. right now i'm dual-booting between win 7 and opensuse KDE. i originally alotted for a parsley 10gb only to use as a backup whenever my windows inevitably starts having problems and i have no access or means to repair it/ use as a secure place to scan my windows partition and external drives for viruses. i want to expand my opensuse partition.
so my problem is this: i have a 200gb windows partition, a 15 gb partition (U) i set up to do file swapping cross-os (which i couldnt figure out how to work, btw. formatted it in FAT32). and my 10 gb suse partition (O). i tried using the built-in KDE partition manager to shrink or completely do away with U, and expand the suse partition. the problem is my suse partition is ecapsulated by an extended partition, whatever that is, and suse has its own 1.5 gb "swap" partition. after shrinking U i tried expanding O, but it said i was already at max size. tried expanding extended, also didnt work, same goes for the 1.5 gb suse swap partition.
i read in another post that i could do the resizing via some sort of bootable disc, the only problem is that i have no access to cd or dvd blanks, and i have no usb thumb drives just 2 external hd's - 1tb and 250gb. so how can i go about expanding my opensuse partition? the easiest way i could think of is to just reformat/repartition from windows, and reinstall opensuse from my boot dvd. only problem with that is i cant SEE my suse partition from windows...
i imagine i could also just boot from the dvd and run the installer again, and use the partitioner built into the installer, but i didn't really feel comfortable with it the first time around. im know my way around a computer but all of a sudden it blindsided me with a ton of options i know nothing about, it was a little too complicated.
i want to extend my existing partition size,but it should do it without formatting my operating system.i don't have the solution.Is this possible?if possiblsolution.hope somebody should give the answer
I've had Ubuntu for quite some time, but recently I got my hands on a copy of a Windows 7 Upgrade disk, and thought that I would like to dual boot between Windows and Ubuntu. I wiped Ubuntu from it's partition because I know that Windows is picky and needs everything to be clean to be installed. Then I proceeded to install Windows 7 using the upgrade disk only to find that the product key to activate Windows wasn't valid. This was because I tried to clean install Windows 7 instead of upgrading. Then I reinstalled Ubuntu 10.04 on my computer and was able to dual boot between Ubuntu and Windows. After reading online, I discovered that all I had to do was reinstall Windows once I was running Windows for the product key to be valid. Now windows is running great on my computer, but I am unable to find the Ubuntu partition to boot into it. Every time I turn on my computer it goes straight to windows and I don't even have the option to boot into Ubuntu even though it is still on my computer.
I've a flash drive that it's partitions formatted as fat32, ex4 and encrypted ext4. It works fine on the system that I've formatted it on, but when I try to use it on my other Linux distributions I get these problems:
* ext4 partition accessible by root only. * after entering my pass-phrase I get
Code: /dev/mapper/udisks-luks-uuid-***** uid1000 is mounted What I'm asking for is a way to create the ext4 file system without being attached to some UID and to be accessible by any user.
Upon trying to boot Windows I got through the GRUB startup selections and then i get stuck at a black screen displaying "Starting Up. . ." That would be no problem, I just boot ubuntu instead and mount the partition to access the programs I'm looking for. Now I get an interesting error message:
"Error mounting: mount exited with exit code 13: ntfs_mst_post_read_fixup: magic: 0x00150000 size: 4096 usa_ofs: 0 usa_count: 1040: Invalid argument Actual VCN (0x15000011d92501) of index buffer is different from expected VCN (0x1). Failed to mount '/dev/sda1': Input/output error NTFS is either inconsistent, or there is a hardware fault, or it's a SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows then reboot into Windows twice. The usage of the /f parameter is very important! If the device is a SoftRAID/FakeRAID then first activate it and mount a different device under the /dev/mapper/ directory, (e.g. /dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation for more details."
I would run chkdsk in windows if I could, but that's my problem in the first place.
i recently deleted a NTFS partition while ubuntu was running and didnt disable the automount and when i tried to restart from what i can see it is trying to mount the partition which does not exist. When booting it says something to the effect of mounting dev/sda5 (which is now ubuntu) NTFS signature incorrect, what file must i change to allow ubuntu to boot because i kind of dont want to reinstall ubuntu and reconfigure it.
then I used dd to transfer data from the old drive to the new drive. Now I am unable to boot into the new drive. I tried to boot again from the live-CD but fdisk reports that the drive has no partition table. I can still mount the devices (e.g. mount /dev/sda3 /mnt/sda3) and I can see all the files. But without a partition table, I can't set one partition to be bootable. Why doesn't gparted create a partition table? it created the filesystems just fine. how do I boot into the new disk? What do I have to do to make grub handle the new disk?
I'm running 10.04 on Wubi in XP and want to partition to dual boot properly. I've done the permanent grub-update issue fix for Wubi so I've got the time to figure this out, I'm just at an impasse right now.
I've tried both GParted and PartitionMagic Live CDs and have been unable to shrink my main partition down. It's currently at 45 or so GB with about 22 GB empty. I've turned off my virtual memory in XP as well and no dice. I keep getting the error in GParted during the shrinking process. It doesn't really explain why, though.
After my trial windows server expired, will use Ubuntu 11.04 as main OS without formatting my entire hard disk. Will this work as i have only 1 sata hard disk?
just installed Fedora 15 on my system alongside Ubuntu 10.10 on My 500 GB hard disk.However on starting the computer the Fedora 15 partition gets loaded automatically. How do I access my Ubuntu 10.10 partiion? I want to have a choice at start-up which OS to use. On my previous computer when I used to have Windows and Ubuntu,a menu used to appear asking which operating system to load.
I have setup my opensuse 11.3 machine w/ LVM support for everything but boot. I have the following disks:
/dev/sda1 - 70.57 MB /boot /dev/sda2 - 5.81 GB back up for original windows /dev/sda3 - 292.21 GB LVM group.
When I attempt to resize the 70.57 MB partition, it tells me that 70.57 mb is the max that this partition can be. This was true even during the install
I don't want sympathy, but merely explain what I'm up against. I'm 63 years old. I'm on medical and mental disability (Cognitive failure, the beginning of Alzheimer's). I used to be a good computer tech, but now, because of my memory problems, I don't remember how to do a lot of things with a computer.I'm seeking assistance (not 24/7 help or hand-holding)to help me reformat,partition, and set-up a dual-boot for both WIN 2000 Pro and Ubuntu Linux to operate programs where I can use my Amateur (Ham) Radio in digital modes (PSK-31, PSK-64, BPSK, cw, etc). I'm choosing NOT to run Ham Radio DeLuxe, as it's bloated with M$ "code" and could be hacked and messed with.
The hard drive is a Maxtor 80 gig (78 g formatted). I have another drive,a Western Digital 40 gig (37 g formatted) that I use for Windows as well, but mostly it contains Excel spreadsheets with Part 90 - Public Safety frequency information for the local (within 250 miles) from my home. It's a FAT 32 and I'd like the 80 gig to match that
It seemed that it would be simple enough: take the 'f' option in the expert menu of fdisk to put partitions in order after a gap had been created by a deleted partition and then make corresponding changes in /boot/grub/grub.conf because the root partition was shifted.
Well, it didn't work out that way. No matter what I try, I either see the error 15 at Stage1.5 or the error 28, which is even stranger (file does not fit into memory). All this before I even see a grub menu. It just does not get that far.
Does anyone want to take as stab at guessing what might have happened here and whether I have a chance at recovering without having to reinstall? I can provide concrete data, if anyone would be kind to give it a try. Hoping that this is a known problem and something can be guessed from what I stated here but I can be as specific as needed, just don't want to generate noise if there are no takers.
