Ubuntu Installation :: 10.10 Installer Shows No Progress After Formatting Partition
Apr 24, 2011
I'm trying to install Ubuntu 10.10 on a brand new 500GB hard drive I just purchased and installed in my machine. I boot from the CD and instruct Ubuntu to install to this drive and tell it to "erase and use the entire disk" for this 500GB drive. After moving forward from that, I see it saying a message about creating an ext4 partition for root "/" and then shortly after the entire install dialogue goes away. All I am left with is the little circle cursors spinning round (mouse input still works) and the installation background. The HDD activity light was still on though. I gave it about 3 hours before I finally gave up and tried again.
When I tried again, I saw that it did create two partitions (root and swap) during the last attempt. The same thing happened, although now even mouse input isn't responding so my system is completely locked up. HDD activity remains active this time as well. Running Ubuntu from the CD works fine. The only problem I saw with it was when I ran gparted from the CD and tried to manually create a ext3 partition on my new disk drive. When I tried that, I ran into a similar occurrence (couldn't run any programs, eventually system locked up) and had to reboot.
I have a second hard disk but I have a lot of valuable data on that and don't want to mess around with it. It could be a hardware failure, but that seems unlikely to me as this is a brand new Seagate disk drive. I suppose I could try installing it on a spare partition on my other drive and see what happens, but other than that I'm out of ideas.
View 3 Replies
ADVERTISEMENT
Apr 13, 2009
I am doing a fresh install of Fedora 10 64bit on my PC. What I have done is, freshly installed Vista Home Premium 64 bit on the entire Hard Drive (680GB), then fired up the live CD and told the installer to resize sda1 (The windows partition) to about a 60:40 ratio. I intend to dual boot the system
Now the thing is, it's been running for half an hour now and there's no progress indicator on the installer so I don't know if its actually doing anything. Well there is a progress indicator but it's nonsensical, it just moves backward and forwards. The HDD indicator LED on my computer is flashing every now and again, but not constantly as I expect it to?
View 5 Replies
View Related
Mar 21, 2015
Tried to install Jessie RC1,but installer hangs on formatting the partition,at 33%.
View 7 Replies
View Related
Mar 17, 2010
I formatted 56 GBs of my hard disk space into fat32 and it seems that 27 gbs of it is used! Though direct checking from the volume itself shows nothing like this, gparted still insists 27 gbs are used.
View 4 Replies
View Related
Jul 18, 2011
Sometimes it does this and other times it does not. It has happened with 2 hard drives. When it formats the partition the bar stops and the mouse pointer graphics stops.
View 3 Replies
View Related
Jul 11, 2010
i cant install 10.04 on my desktop with the 32bit or 64bit versions of 10.04 desktop.
i get to step 4 and there is nothing listed for partitions or any information and if i click forward, i get that message "no root file system is defined" "please correct this from the partition menu"
View 1 Replies
View Related
Dec 20, 2010
This is maybe the 15th time I've installed an Ubuntu OS in the past two years, and it's the first time I've really been stuck.Not long ago I installed 10.10, with no problems, but a couple days ago I did a fresh install of windows 7, and I planned to re-install ubuntu 10.10 alongside it.Before I installed windows, I created a partition on my 320gb HD, half and half, but while doing this I noticed that gparted would crash if a USB key was plugged in. I mention this because I'm convinced this is related to the problem.
After having installed windows, I went and created a bootable usb key with 10.10 using unetbootin (which I've used once before, but along time ago). I'm unable to make an actual live CD because my disk drive has been broken for the past year - a fact that has never stopped me from installing different distros with a usb key.So the installer starts as usual, but after the 2nd (or 3rd) step (where it says "for best results, make sure that your computer is plugged in, that you have an internet connection, and at least [...] of free space), I click forward, and the little wheel just spins forever,it never advances.I tried everything again with 10.04.1 and I got the same thing, this time after choosing my keyboard layout.
When I simply go to the live distro and then go to install, I see that at that moment, there's a crash report, something about gparted, which I'm assuming is a built-in part of the next step.
To sum up
-gparted doesn't seem to like USB keys
-installer won't advance to partition table
-can't use a disk because drive is broken!
My computer is an Acer Aspire 4530, AMD64. The 10.10 and the 10.04.1 installations were both 64bit.
View 8 Replies
View Related
Oct 12, 2010
I have win 7 installed on a primary partition along with two other primary partitions containing a recovery partition and system files partitions. (don't know exactly what the latter is for.) I made a defrag and resized the win partition to make some free space for a primary ubuntu partition.I then inserted the 10.10 live disc and created a fat32 shared partition, a root (/), a /home Nd a swap in the advanced gparted menu, BUT every time I try to initiate the installation I get an error message saying that installer couldn't create the fat32.
View 4 Replies
View Related
Jun 12, 2009
When using the manual partitioner on the fedora 11 installer on the live cd, both for 64 bit and 32 bit, it will not allow me to create a new partition. I understand that I have four primary partitions and it cannot have more than that, so I tried deleting one of the partitions, then creating the new ext4 partition for F11. It still fails and gives me the same bugsee attachment)
how to read this, especially since there is so much there. I see at the top it says that there are 4 primary partitions, could it possibly still be seeing 4 primary partitions when trying to create the new one, even though I am deleting one of them? Other than this, I truly have no idea what else I can do.
EDIT: Attachment wont load up for some reason, here is some of the error file:
anaconda 11.5.0.59-1.fc11 exception report
Traceback (most recent call first):
File "/usr/lib64/python2.6/site-packages/parted/disk.py", line 183, in addPartition
constraint.getPedConstraint())
[Code]....
View 5 Replies
View Related
Oct 14, 2010
I've not jumped on the Alpha/Beta upgrade's this time round so have decided to upgrade by doing a fresh install. I'm using the normal desktop install cd via usb. On the drive setup I choose to manually setup the partitions. I deleted the partition which help Lucid. Created a new partition with the root path. All good so far. I selected my home partition and selected use as 'ext2', entered /home as the mount point. Clicking ok to return, showed the /home partition as marked to be formatted, I was unable to change this ... so I decided to quit the installer and reboot ...
1st problem ... the root partition for Lucid was deleted, and a new empty partition created, despite the fact I had not confirmed the actions.
2nd problem ... rebooting with the live cd (which I'm on now) and running the installer, it hangs when I select manual partitioning.
View 7 Replies
View Related
Feb 3, 2011
So I decided to reinstall my 10.10 to undo the 'encrypted home folder feature.' I know are other ways to undo the encryption, but for various reasons I'd rather just do a quick reinstall and start fresh.Currently, I dual boot linux and windows, each with their respective partitions. There is also a storage partition that is fat32 to swap files between the two OSes. So the partitions are:
[Code]...
View 5 Replies
View Related
May 19, 2015
I created a bootable Debian installer on my USB flash drive. The Debian Installation Guide advises;
The hybrid image on the stick does not occupy all the storage space, so it may be worth considering using the free space to hold firmware files or packages or any other files of your choice. This could be useful if you have only one stick or just want to keep everything you need on one device. Create a second, FAT partition on the stick, mount the partition and copy or unpack the firmware onto it.
I want to put non free firmware packages on the stick but when I try to create a FAT partition in the free space using Disk Utility I get the following error;
Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sdb, start=661837824, size=7507093504, type=
Entering MS-DOS parser (offset=0, size=8168931328)
MSDOS_MAGIC found
looking at part 0 (offset 0, size 657457152, type 0x00)
new part entry
[Code] ....
I formatted the drive to clear it, created a new FAT partition and copied the Debian.iso to it again. When I tried again to create a partition in the free space the same error occurred.
View 7 Replies
View Related
Jan 12, 2016
I have an issue with Gparted v0.19.0 (Jessie) which has replaced v0.12.1 (Wheezy) which works fine. I had hoped to ask this question in Gparted's own forum, but after three weeks and multiple attempts no-one has approved my account there.
Unfortunately, my existing partition structure (on two different laptops) seems to be invisible to the new version of Gparted. Since parted seems to be used by the Debian installer, the Jessie installer cannot install on these machines without repartitioning the entire disk. That means that on such machines, the only option is to wipe everything or install Wheezy, then edit sources.list to upgrade to Jessie.
Both Gparted v0.19.0 and the Jessie installer report the entire hard disk as a single Fat16 partition,The same partitions which are invisible to Gparted appear as normal in the Places sidebar, of either Thunar or the PCManFM file manager. They can be mounted and used, seemingly without issue (I have experienced the same problem under Ubuntu/Lubuntu 15.10). Below, is the shell output of fdisk, which can see the partition structure and parted, which cannot:
Code: Select all$ sudo fdisk -lu
Disk /dev/sda: 74.5 GiB, 80026361856 bytes, 156301488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[code]...
View 6 Replies
View Related
Aug 21, 2009
This is my first time using Fedora. My previous experience is from Ubuntu. However I want to give a try for Fedora so I went ahead to install it on my new computer. Problem is that Fedora Installer (Live CD) wiped out my NTFS Partition. Causing my computer unable to recover Vista from factory DVD because it lost system partition as well. I want to know if this is my error or a bug in installer.
Original partition setup:
220 GB - Vista System Partition (NTFS)
14 GB - Recovery Partition (NTFS)
First I resized system partition under Windows Management in Vista:
170 GB - System
50 GB - Unallocated
14 GB - Recovery
Using GParted from Ubuntu 9.04 Live CD, moved recovery to the left:
170 GB - System
14 GB - Recovery
50 GB - Unallocated
Rebooted into Vista, make sure everything is fine. Then put in FC 11 Live CD, using custom layout setup in partition, intended partition layout is:
170 GB - System (NTFS) - Primary sda1
14 GB - Recovery (NTFS) - Primary sda2
200 MB - /boot (ext3) - Primary sda3
sda4 - Extended Partition
45.8 GB - / (ext4) - sda5
4 GB - swap - sda6
After I check my setup and pressed enter, it returned with unable to format /boot error: -1. Restart FC installer, it tells me that my hard drive needs to be re-initialized. I clicked no and reboot. BIOS tells me that no OS is found. Attempting to recover from factory DVD failed, telling me that system partition is gone. I want to know did I do something wrong or is this a bug in FC installer.
View 6 Replies
View Related
Jul 28, 2011
Trying into install fedora. I am setting up my system as a dual boot over two drives. I have set up a custom layout and whenever I get to the step to write changes to disc it crashes with an unhandled exception. I have tried multiple times now, it always crashes.
Here is the first line from the exception report:
anaconda 15:31 exception report
Traceback (most recent call first):
File "/usr/lib/python2.7/site-packagees/pyanaconda/storage/devicelibs/swap.py", raise SwapError("swapon failed for '%s'" % device)
View 10 Replies
View Related
Sep 24, 2010
boot up in to chameleon, lists only Mac OS X as a boot option. Reboot, load Ubuntu 10.4 install cd, get to a terminal, mount /dev/sda3 /mnt grub-install --force --root-directory=/mnt/ /dev/sda3
reboot, let chameleon come up, it sees both Mac OS X & Ubuntu partitions and I can boot to either or happily, now here is the problem... If I select linux and boot in to linux from chameleon, i am brought to the grub menu, where i can select the first choice which is normal ubuntu 10.4 and every thing is great... until I reboot and my linux partition no longer shows up in chameleon, as if tthe act of booting in to grub is changing something / deleting itself from the partition? and I have to do the whole thing over again. SO, not having to even go in to OS X, I'm not sure thats really the concerns more as I'm doing something wrong with grub.
View 3 Replies
View Related
Oct 13, 2010
I have been upgrading from 9.04 to 10.04. Now, I want to install 10.10 from the beginning without losing the data in my current partitions but when I run the Maverick installer it recognize my disk as a whole with no partitions. From another posts, I suspect that the problem is in the partition list because it seems to be a duplicate partition but don't know how to fix it. This is the fdisk output:
Code:
jgarcia@jgarcia-laptop:~$ sudo fdisk -lu /dev/sda
Disco /dev/sda: 250.1 GB, 250059350016 bytes
255 cabezas, 63 sectores/pista, 30401 cilindros, 488397168 sectores en total
Unidades = sectores de 1 * 512 = 512 bytes
[Code]....
View 2 Replies
View Related
May 4, 2010
I recently upgraded to 10.04. The grub menu shows my windows partition but does not load it when I select that OS.
View 2 Replies
View Related
Oct 2, 2009
when i try to install fedora 11 on my laptop my Fedora 11 Preview installer crashes after attempt to create a partition. How do i overcome this problem
View 6 Replies
View Related
Nov 28, 2009
I have a computer with windows xp on it, and i want to dual boot with fedora 11. I have 2 hard drives in it, 1 500gb HD and 1 350gb HD. the 350 isnt much concern b/c its just sitting there all free and unpartitioned right now. Now my 500gb is split into 3 partitions, a 20gb(with xp installed on it) a 105 gb with pretty much nothing on it and a 350gb with all my data.
My problem is I'm trying to resize my 20gb partition through the fedora 11 installer and when I tell it to resize say to 10gb it starts and fails the resize. its a NTFS partition and the windows stuff on the partition is only about 8gb. any idea whats going on? the only error I get is "The resize has failed"
View 3 Replies
View Related
Nov 22, 2010
Is there any way to partition off say 40GB of a 250GB drive (only 5GB used) into an NTFS partition to install windows Vista SP1?? I have tried the System -> administration -> disk utility, but I can not figure out how to partition in it.
View 7 Replies
View Related
Jan 3, 2010
Ive got two partitions of xubuntu installed and I only want one. Is there I way I can just delete the one i dont want and use that extra space for the other?
also, how would i know which is which when deleting?
View 9 Replies
View Related
Nov 21, 2010
I'm currently working on fixing another problem url
I have a 60 g internal laptop hard drive, 30g is Windows 7 and 30g is Ubuntu.
When in Ubunutu I can access the window's driver and mount it, however, when I am in windows 7 it only shows the Window's partition.
Is there a simple way I can get the ubunutu partition to show up>
View 2 Replies
View Related
Oct 31, 2010
Something went wrong during my upgrade, and i was unable to boot. What I did to save the day was to install Lucid parallel (on an other partition). Now I just want to double-check before I mess up again - I've backup-ed all the stuff i wanna keep and want to format the old partition. preferably I'd like to extend my current partition to the whole drive (or just make an empty partition for media if that works). So how do I do this the easiest way, and what would be the best option (i.e. 1 or 2 partts.)?
View 1 Replies
View Related
Jan 14, 2010
I made a new partition on my hard drive, and installed Windows XP on it. However, because of space shortage on the disc (didn't bring my external HDD's with me) I could not "afford" to make the partition bigger than about 7GB. Turns out that's not quite enough. So I thought I'd try to resize the partition. Booted from my Ubuntu LiveCD and entered the partition manager. I'm able to tell the program that I want to resize the Linux-partition (so it sets the now freed space as "unused", but when I chose to "resize/move" on the XP-partition I do not have any free space. Does this mean that I have to resize the Linux-partition (until now I didn't actually resize it, only set the job as "pending" hoping that I could select both to shrink the Linux-partition and extend the XP-partition in one session), or do I have to format the XP-partition and make a new one (larger this time), then reinstall XP?
/dev/sda1 is XP; /dev/sda2 is Linux Mint
View 4 Replies
View Related
Jun 29, 2011
I have created one partition. Now I want to extend that partition without formatting it.
View 3 Replies
View Related
Dec 10, 2009
I am using CentOS 5.4 dvd to install. What I need is to be able to create a partition with GUI (it's druid, maybe) without formatting it. I remeber once there was a check into creating new partition form, but maybe i am confusing with fedora or other distros. Is there a way to complete job using GUI or should i create partitions: / /boot and swap with GUI and the others with fdsik?
View 3 Replies
View Related
Sep 27, 2010
I didn't know how to Make a cd image out of the Ubuntu iso so I made a seperate partition in my drive.Now I'm wondering how to delete the windows partition without formatting the whole hard drive.how to create a bootable cd image
View 2 Replies
View Related
Apr 12, 2010
How can I change the label of one partition on linux without formatting it.
It wll format the partition, and all content disappears.
View 5 Replies
View Related
Aug 29, 2010
I want to install Fedora KDE spin on an existing XFS partition without formatting it. (Since said partition is full of my data that I have nowhere else to put). But the installer doesn't allow me to set the partition as / without formatting. XFS is not one of the filesystems listed as options for formatting. How can I make Fedora do what I want?
View 7 Replies
View Related
