I am using CentOS 5.4 dvd to install. What I need is to be able to create a partition with GUI (it's druid, maybe) without formatting it. I remeber once there was a check into creating new partition form, but maybe i am confusing with fedora or other distros. Is there a way to complete job using GUI or should i create partitions: / /boot and swap with GUI and the others with fdsik?
View 3 RepliesI only have SSH access to a server, but I need to create a small 100MB partition for an installation, that is required. how to create a partition (using 100MB from currently running partition) on the fly in Cent OS 5.3?
View 4 Replies View RelatedI have a disk 300GB I want to make partition using LVM any time I type lvcreate /deve/parta or pvcreate /dev/parta I get a message ( bash: pvcreate: command not found ). I have CentOS Linux 5.4.
How I know if LVM is installed on my machine?
I was trying to create a centos box with xfs partition,how can we install centos enabling the partion with xfs filesystem. rather than doing after installation.
View 1 Replies View RelatedI am trying to create a partition using gparted for my centos installation but I accidentally deleted my partition table. my partition was created on windows7 and dual boot with ubuntu. I am trying to recover it using test disk with ubuntu live cd but after I recover it still I neither can't boot on windows or Ubuntu here is the result of patition quick seart
Quote:
Disk /dev/sda - 320 GB / 298 GiB - CHS 38914 255 63
Partition Start End Size in sectors
>D HPFS - NTFS 0 32 33 12 223 19 204800 [System Reserved]
[code]....
I tried to set up my partition characteristic like this
Quote:
Disk /dev/sda - 320 GB / 298 GiB - CHS 38914 255 63
Partition Start End Size in sectors
1 * HPFS - NTFS 0 32 33 12 223 19 204800 [System Reserved
[code]....
and still can't reboot on my win7 or ubuntu
I need to create an extended partition with no mount point.Enclosed is my custom ks.cfg
install
cdrom
text
[code]....
Is there any way to partition off say 40GB of a 250GB drive (only 5GB used) into an NTFS partition to install windows Vista SP1?? I have tried the System -> administration -> disk utility, but I can not figure out how to partition in it.
View 7 Replies View RelatedIve got two partitions of xubuntu installed and I only want one. Is there I way I can just delete the one i dont want and use that extra space for the other?
also, how would i know which is which when deleting?
I have created one partition. Now I want to extend that partition without formatting it.
View 3 Replies View RelatedSomething went wrong during my upgrade, and i was unable to boot. What I did to save the day was to install Lucid parallel (on an other partition). Now I just want to double-check before I mess up again - I've backup-ed all the stuff i wanna keep and want to format the old partition. preferably I'd like to extend my current partition to the whole drive (or just make an empty partition for media if that works). So how do I do this the easiest way, and what would be the best option (i.e. 1 or 2 partts.)?
View 1 Replies View RelatedHow can I change the label of one partition on linux without formatting it.
It wll format the partition, and all content disappears.
Sometimes it does this and other times it does not. It has happened with 2 hard drives. When it formats the partition the bar stops and the mouse pointer graphics stops.
View 3 Replies View RelatedI made a new partition on my hard drive, and installed Windows XP on it. However, because of space shortage on the disc (didn't bring my external HDD's with me) I could not "afford" to make the partition bigger than about 7GB. Turns out that's not quite enough. So I thought I'd try to resize the partition. Booted from my Ubuntu LiveCD and entered the partition manager. I'm able to tell the program that I want to resize the Linux-partition (so it sets the now freed space as "unused", but when I chose to "resize/move" on the XP-partition I do not have any free space. Does this mean that I have to resize the Linux-partition (until now I didn't actually resize it, only set the job as "pending" hoping that I could select both to shrink the Linux-partition and extend the XP-partition in one session), or do I have to format the XP-partition and make a new one (larger this time), then reinstall XP?
/dev/sda1 is XP; /dev/sda2 is Linux Mint
I want to install Fedora KDE spin on an existing XFS partition without formatting it. (Since said partition is full of my data that I have nowhere else to put). But the installer doesn't allow me to set the partition as / without formatting. XFS is not one of the filesystems listed as options for formatting. How can I make Fedora do what I want?
View 7 Replies View RelatedI'm a big fan of the NSLU2-Linux project so I've been doing some developments for this platform for the last three years. In order for the end users to test my applications, I initially created an USB image with everything bundled into it. Then, they only had to download the image and decompress (dd) it into an USB pendrive with capacity equal or greater than 4 GB. The fact is that this has brought me lots of problems in the practice since my Web server hardly accepts long file transfers.
Moreover, flash spaces beyond 4GB are wasted. As result, I'm now considering a different approach as I don't know how to do it. Well, I've thought that I could maybe create an USB disk image only with the root file system partition. Then, the first time a script runs, it creates a home partition and formats it into the rest of the space available in the pendrive. There is maybe some command-line alternative to fdisk without having the user to interact during the format process... ??
Tried to install Jessie RC1,but installer hangs on formatting the partition,at 33%.
View 7 Replies View RelatedSo I recently installed openSUSE KDE (latest build, don't know the number?). total linux noob, been a windows user all my life. right now i'm dual-booting between win 7 and opensuse KDE. i originally alotted for a parsley 10gb only to use as a backup whenever my windows inevitably starts having problems and i have no access or means to repair it/ use as a secure place to scan my windows partition and external drives for viruses. i want to expand my opensuse partition.
so my problem is this: i have a 200gb windows partition, a 15 gb partition (U) i set up to do file swapping cross-os (which i couldnt figure out how to work, btw. formatted it in FAT32). and my 10 gb suse partition (O). i tried using the built-in KDE partition manager to shrink or completely do away with U, and expand the suse partition. the problem is my suse partition is ecapsulated by an extended partition, whatever that is, and suse has its own 1.5 gb "swap" partition. after shrinking U i tried expanding O, but it said i was already at max size. tried expanding extended, also didnt work, same goes for the 1.5 gb suse swap partition.
i read in another post that i could do the resizing via some sort of bootable disc, the only problem is that i have no access to cd or dvd blanks, and i have no usb thumb drives just 2 external hd's - 1tb and 250gb. so how can i go about expanding my opensuse partition? the easiest way i could think of is to just reformat/repartition from windows, and reinstall opensuse from my boot dvd. only problem with that is i cant SEE my suse partition from windows...
i imagine i could also just boot from the dvd and run the installer again, and use the partitioner built into the installer, but i didn't really feel comfortable with it the first time around. im know my way around a computer but all of a sudden it blindsided me with a ton of options i know nothing about, it was a little too complicated.
I didn't know how to Make a cd image out of the Ubuntu iso so I made a seperate partition in my drive.Now I'm wondering how to delete the windows partition without formatting the whole hard drive.how to create a bootable cd image
View 2 Replies View RelatedI'm trying to install Ubuntu 10.10 on a brand new 500GB hard drive I just purchased and installed in my machine. I boot from the CD and instruct Ubuntu to install to this drive and tell it to "erase and use the entire disk" for this 500GB drive. After moving forward from that, I see it saying a message about creating an ext4 partition for root "/" and then shortly after the entire install dialogue goes away. All I am left with is the little circle cursors spinning round (mouse input still works) and the installation background. The HDD activity light was still on though. I gave it about 3 hours before I finally gave up and tried again.
When I tried again, I saw that it did create two partitions (root and swap) during the last attempt. The same thing happened, although now even mouse input isn't responding so my system is completely locked up. HDD activity remains active this time as well. Running Ubuntu from the CD works fine. The only problem I saw with it was when I ran gparted from the CD and tried to manually create a ext3 partition on my new disk drive. When I tried that, I ran into a similar occurrence (couldn't run any programs, eventually system locked up) and had to reboot.
I have a second hard disk but I have a lot of valuable data on that and don't want to mess around with it. It could be a hardware failure, but that seems unlikely to me as this is a brand new Seagate disk drive. I suppose I could try installing it on a spare partition on my other drive and see what happens, but other than that I'm out of ideas.
i want to extend my existing partition size,but it should do it without formatting my operating system.i don't have the solution.Is this possible?if possiblsolution.hope somebody should give the answer
View 5 Replies View RelatedI've a flash drive that it's partitions formatted as fat32, ex4 and encrypted ext4. It works fine on the system that I've formatted it on, but when I try to use it on my other Linux distributions I get these problems:
* ext4 partition accessible by root only.
* after entering my pass-phrase I get
Code: /dev/mapper/udisks-luks-uuid-***** uid1000 is mounted What I'm asking for is a way to create the ext4 file system without being attached to some UID and to be accessible by any user.
I formatted 56 GBs of my hard disk space into fat32 and it seems that 27 gbs of it is used! Though direct checking from the volume itself shows nothing like this, gparted still insists 27 gbs are used.
View 4 Replies View RelatedI make a new msdos partition (msdos) with Parted for data exchange with Windows. owner group is root (Parted requires root to work), but owner user is my current user. so neither can change permissions. I can't change partition label, too.
View 1 Replies View RelatedAs I recent convert from Ubuntu to Centos, I have a lot to learn. In Ubuntu, I can plug in a memory stick, run the menu option: System/Adminstration/Partition Manager, highlight the memory stick and choose "Format: Encrypt"
In Centos, my memory stick is /dev/sdc1, how do I, using command line: format it as /ext3, encrypt it using cryptsetup, and set a password?
I'm having an issue with formatting the HDDs during the CentOS 5.5 installation.I've set up a hardware RAID1 with 2TB HDDs using FastTrack TX4650 (http:url... as a RAID controller.Then I tried to install CentOS 5.5 32-bit version using this configuration. I preloaded the required RAID drivers for the CentOS and started the installation. Everything went fine until the part where the CentOS formats the HDD - it took 12 hours and the process still goes on. I cannot determine whether the install process is stuck or the HDD is still being formatted.how long the formatting should take considering the above mentioned configuration?
View 3 Replies View RelatedHardware:2x Intel Xeon E5520 @ 2.26 Intel Server Board S5520UR LSI 8888ELP raid controller
Anyone gotten CentOS 5 to install on this hardware? The installer boots and partitions the drive, but either crashes during formatting of the partitions or during package installation with a kernel panic.
I am currently running CentOS 5.5 on a software raid 1 setup.
I would like to remove the raid configuration and have it run without raid.
How would one go ahead and do this?
When using the gparted option to create a new partition table does this automatically create a new mbr?
View 1 Replies View RelatedI installed Redhat Enterprise 3 on one of my servers. In my haste I didn't properly partition both Hard Drives and only properly partitioned one of them. Thus now I have
/dev/sdb1 478711768 137858256 316536328 31% /
/dev/sda1 101089 15346 80524 17% /boot
Where /dev/sda1 is actually a 80 GB hard drive. Is there anyway I can safely and easily repartition the unpartitioned space without causing a huge mess? I have a very important Oracle database on /dev/sdb1 and thus I want to be able to back it up on the second disk. I can create a partition on that drive?
I installed fedora 13 64 bit and it works great but I encountered several issues when setting up guest OS with KVM. The problem seems to be related to selinux. But let me first ask question about logical volume. By Default fedora created logical volumes:
[Code].....
"If you expect that you or other users will store data on the system, create a separate partition for the /home directory within a volume group. With a separate /home partition, you may upgrade or reinstall Fedora without erasing user data files." seems to suggest I have to create a separate physical partition and assign that to /home. But reading elsewhere it seems to suggest logical volume acts like a partition. My goal is to make it easy in case fedora is hosed and I have to re-install it without affecting /home where my cirtical data resides. Given above do I need to create a separate physical partition or I am just fine?
I have a second hard disk that originally had windows and all my data. Windows is hosed but I can see my data from within Fedora and Windows is gone and I created created new partition in its place which used ot be the C:/ drive appears as 53 Gb filesystem. My data which was originally D drive appears as 215 GB filesystem. As given in [URL] I want to create a new logical volume in 53 Gb filesystem which I want to use as space for virtual disk to install guest OS's in KVM. Currrently 53 GB filesystem is mounted as /media/3467BH89JK789 but this does not work well with KVM. how do I create this logical volume out of 53 Gb filesystem partition and add proper selinux info and do I add to vg_vostrolx volume group and in a different volume group?