when I try to open Banshee I get an error message telling me that the disk is malformed and then Banshee closes itself (faster than I can copy and paste the exact error). I did some searching and apparently it's caused by the configuration file, but I did a complete removal of Banshee from the package manager, restarted the computer, and re-installed Banshee, but it's still giving me the error.
View 1 Replies
After some time I was trying to use banshee media player. I am given an error message:
Banshee Encountered a Fatal Error
Exception has been thrown by the target of an invocation.
The OS is Squeeze and the machine is a Netbook with Intel Atom inside.
A recently installed 10:10 displays this message at start up:
FATAL: Cannot load generic modules /lib/modules/2.6.35-25-generic/modules.deb
(As best I can remember.It disappears so fast).
As I am having trouble getting a fingerprint reader to work, I thought I ought get it fixed.e.
I tried to install some plugins for banshee following instructions on this website: [URL]
I got about halfway through and finally noticed it was for Banshee 0.10.0, so these instructions did not exactly work for 1.6.0. So now when I try to start banshee I get the following output:
Code:
[Info 16:59:34.437] Running Banshee 1.6.0: [Ubuntu lucid (development branch) (linux-gnu, x86_64) @ 2010-04-04 14:20:11 UTC]
Exception has been thrown by the target of an invocation.
[Code].....
Banshee outputs this error when i start it
An unhandled exception was thrown: Sqlite error 14: unable to open database file (SQL:
BEGIN TRANSACTION;
DELETE FROM CoreSmartPlaylistEntries WHERE SmartPlaylistID IN (SELECT SmartPlaylistID FROM
[code]....
Since upgrading to 11.04, Banshee crashes as soon as it's launched. When run in terminal, I get the following: Quote:
[Info 12:37:35.878] Running Banshee 2.0.0: [Ubuntu Natty (development branch) (linux-gnu, i686) @ 2011-04-18 16:21:33 UTC] [Warn 12:37:36.571] Could not migrate album artwork cache directory - System.IO.DirectoryNotFoundException: Directory 'file:/home/laurie/.cache/album-art/32' not found. (in `mscorlib') at System.IO.Directory.GetFileSystemEntries (System.String path, System.String searchPattern, FileAttributes mask, FileAttributes attrs) [0x00000] in <filename unknown>:0
[Code]...
Recently Banshee won't start up all the way. If I just start it from the Unity launcher I get a blank white screen which will eventually stop responding. If I run Banshee from a terminal I get this output:
Code:
[Info 14:08:56.332] Running Banshee 2.0.0: [Ubuntu Natty (development branch) (linux-gnu, x86_64) @ 2011-04-18 16:18:52 UTC]
[Info 14:08:58.329] Updating web proxy from GConf
[Info 14:08:58.536] All services are started 1.852889
** (Banshee:4120): DEBUG: SyncDaemon already running, initializing SyncdaemonDaemon object .....
(Banshee:4120): Cogl-glx-WARNING **: ./cogl-framebuffer.c:912: Failed to create an OpenGL framebuffer
I just installed Maverick on a brand new system last Saturday. Everything worked, except dual monitors, so I activated the proprietary ATI/AMD driver. That allowed the dual monitors to work, except that it put a little "AMD unsupported hardware" watermark in the lower right-hand side of each screen. After a day or two, I decided to go back to the default driver while trying to figure out how to avoid the watermark.
I assumed that when I deactivated/removed the proprietary driver that it would automatically switch back to the default. Instead, my computer now boots to TTY1, and when I try to install xserver.xorg, etc., I get a lot of error messages,ike "No screens found" or "Screens found, but configuration is unusable," etc. The same messages show up in the logs.Can anyone help me get back to a useable desktop display? At this point, I don't care which one. erhaps the proprietary would be easiest since it seems to be holding my system hostage, but either one would work.
I've installed 9.10 on a work station with success. I've got an nvidia quadro fx 3000 and its supported under nvidia legacy driver apparently. So I've tried to install the driver with no success. Xorg.0.log reports a fatal server error no screens found. I get a flashing console login when I boot with "nvidia" device driver in xorg.conf, it boots fine with "nv". No matter what I try I cant get it to boot with nvidia drivers. Also, on a side note, after initially installing nvidia driver thru hardware in gnome, I no longer have a grub loader option to select recovery or anything else. Upon boot it displays "grub" briefly then continues to boot to gui. I've set the delay to 20 seconds with no results.
Resolved the issue of the display, now on to the grub menu.
I'm having a problem with banshee. It's doubling podcasts. Also it says that three different podcasts have the same size and length as each other(which they don't) Unfortunately I can't download to test them yet as my internets slow till midnight.
In screenshot 1 you can see the podcast doubled when viewing all podcasts. However when i go directly into the Desert island discs feed it only displays one, which is correct(screenshot two)
I migrated to Debian sid, but since then I got this error everytime I launch Update Manager (whether it's in graphical mode or from a shell). Just after putting down my root password, I got this error:
Title of the window: (as superuser) A fatal error has been detected in update-manager. Do you want to submit a bug report? Selecting No will close the application. Whether I click Yes or No, nothing happens.
When I am trying to run the Xserver using the command startx I am getting the below mentioned error
xauth: creating new authority file /oracle/oracle10g/.serverauth.22555
Fatal server error:PAM authentication failed, cannot start X server. Perhaps you do not have console ownership?
[code]....
I have got xorg and gnome-core installed. When I put in command startx I get the following message: X: warning; process set to priority -1 instead of requested priority 0 Fatal server error:Server is already active for display 0 If this server is no longer running,remove /tmp/.X0-lock and start again. when I try to sudo Xorg -configure it shows me same message server is ..... lspci shows me the following information 04:02.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27)So what I am doing wrong and how do I get this videocard working with Xorg.
View 7 Replies View RelatedI've just install qemu-kvm from [URL]
I run modprobe kvm and modprobe kvm-intel to load the modules, but the second command won't work.
It gives the following error -
Code:
root@mika:/home/mika# modprobe kvm-intel
FATAL: Error inserting kvm_intel (/lib/modules/2.6.33.4/kernel/arch/x86/kvm/kvm-intel.ko): Operation not supported
i have ubuntu karmic 9.10 and when i try to update anything or install anything the a very similar error occurs."(Reading database . . . 55%dpkg: unrecoverable fatal error , aborting: files list file for package `com.palm.net.precoddr.fcoaster' contains empty filenameit repeats this message 3 times then gives up i believe.
View 9 Replies View RelatedAfter I upgrade the Banshee to 1.7.5-91 version, I can't start it. When try to start it, the window of it appears and close immediately.
Following is information I run it from console:
$banshee-1
[Info 18:48:29.169] Running Banshee 1.7.5: [Banshee / openSUSE_11.3 (linux-gnu, x86_64) @ 2010-09-07 20:06:10 UTC]
[Warn 18:48:31.955] Hardware manager extension failed to load - System.InvalidOperationException: Type 'Banshee.Hardware.Gio.HardwareManager' not found in add-in 'Banshee.Gio,1.0' (in `Mono.Addins')
[Code].....
Tried updating today from Ubuntu 10.04 to 10.10. Seemed to go ok, but on reboot I got the message
Error Modprobe FATAL Could not load /lib/modules/ 2.6.35-21-generic/modules.dep no such file or module
Xorg seems to crash randomly and with no real reason. Once it does, I can't restart it. If I try to restart it with GDM, nothing will happen. However once it crashes, Ubuntu's low graphics mode window pops up. Telling it to reconfigure the xorg config seems to do nothing for my problem. I will still crash after words.
Right now I'm running in an earlier kernel, hoping this will keep it from crasgubg
Here is my xorg log. code...
I am trying to apply updates, but receiving the following error:
[Code]....
I have a virtual machine (VirtualBox) with Ubuntu 9.10 installed, I'm trying to install MySql community editor using the linux-generic package (the tar package), I followed all the procedure but I had a problem with the next line of code:
shell> scripts/mysql_install_db --user=mysql
I don't understand a lot about the command line, but I think this line of code is used to create the basic tables of the database (users and so on). the problem I got with this line of code is:
FATAL ERROR: Could not find mysqld
I googled it and after a while I found this blog:
azimbabu.blogspot.com/2009/07/mysql-5136-in-ubuntu-904-fatal-error.html
The blog says that the problem is a default instalation of SQL, and the solution is replace the file my.cnf in the location /etc/mysql for other file that comes with the package.
I didn't replace the file my.cnf, I only changed the name and it woked perfectly, and this is the problem, I don't understand why it worked.
Any one knows why this file is so important?What could happen if I delete this file?what is the purpose of the package mysql-common un Ubuntu?
for some reason my first updating was interrupted and from then i cannot update. i get the following message:
rpmdb: PANIC: fatal region error detected; run recovery
error: db3 error(-30974) from dbenv->open: DB_RUNRECOVERY: Fatal error, run database recovery
error: cannot open Packages index using db3 - (-30974)
error: cannot open Packages database in /var/lib/rpm
CRITICAL:yum.main:
Error: rpmdb open failed
[root@laptop etc]# yum repolist
[Code]....
Quote:dpkg: unrecoverable fatal error, aborting: failed in buffer_read(fd): files list for package `sysvinit-utils': Input/output errorE: Sub-process /usr/bin/dpkg returned an error code (2)This is the error i get when i try to update my system, fresh install of ubuntu 9.10
View 2 Replies View RelatedI am having trouble installing the 10.04 RC On my desktop the installer just crashes with a fatal error, before you get to the first screen of the installation process, where you choose to run as live cd or install. On my Laptop i am trying to Install alongside my current 9.10 installation and i keep getting the errors illustrated in the screenies. It is all probably down to my stupidity, but if it is not then this is very worrying 1less than a week before release.
View 8 Replies View RelatedThis box is running 10.04 server, it's been running perfectly for almost 6 weeks. It's only function in life is running MailArchiva which is an ediscovery package, runs very well. Anyhow, yesterday the boss tells me he wants to do something else so the last thing I did was an apt-get update and an apt-get upgrade, no errors were observed, I seem to remember like 8 updates were available, this is what I've normally done in the past to keep it current. The last thing I did after that was shutdown -r now.
This morning I can't get into the box, I reconnected a monitor to it and this is the error I'm getting when it stops after about 9 lines into the boot process;
modprobe: FATAL: Error inserting padlock_sha (/lib/modules/2.6.32-24-server/kernel/drivers/crypto/padlock-sha.ko): No such device.
This is a mystery to me, the system is not encrypted. The only stuff that is belongs to MailArchiva. Anyhow someone evidently made off with my install cd so I am downloading another to see if I can repair this but I have no idea what broke.
I upgraded Ubuntu from version 10.04 to 10.10. When the upgrade completed I was asked to reboot. After reboot I simply got the message "error: file not found" on the screen. After a few seconds the machine rebooted.
I guess it is the boot loader that was not found. Is there some hope of fixing this problem?
Ubuntu 10.10 Whenever I try to boot up now I get a command line environment instead of the normal gnome desktop. The first error message that comes up is: "Screens found,but none have a usable configuration" further down: "Fatal server error: no screens found" Any way I can re-configure so it detects my monitor?
View 9 Replies View RelatedI'm using with success NX server and client on Ubuntu 11.04 on both side. Yesterday the server crashed and now the client can't connect to it. The client works well because if I try to connect to an other server it works well and if I try to connect to this server with an other user it works well. So I think that there is a problem with my user. I have tried to solve the problem as explained in the details of the error. Unfortunately there is no file /var/log/messages so I can't search the code of the exception.
Code:
NX> 203 NXSSH running with pid: 3877
NX> 285 Enabling check on switch command
NX> 285 Enabling skip of SSH config files
NX> 285 Setting the preferred NX options
NX> 200 Connected to address: 10.1.0.60 on port: 22
NX> 202 Authenticating user: nx
[Code]...
I have server 10.04 running, and I modified my fstab file to automatically mount an NTFS partition on startup, but after a reboot, I see that I clearly did something wrong, as now it will not boot. The output is:
[Code]....
init: ureadahead-other main process (923) terminated with status 4 If this is an error with my changes to the fstab file, is there any way I can access is to change it? No matter what i do I can't get it to boot.
I am trying to install a program called airfart and when I run make after cd'ing to the appropriate file i get this
Code:
g++ -g `pkg-config gtk+-2.0 --cflags` -o src/main.o -c src/main.cpp
Package gtk+-2.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing `gtk+-2.0.pc'
[code]....
Getting extremely frustrated. Downloaded MiniTube from Ubuntu Software Center and it doesn't work. Every attempt to view a video is met with "Fatal error: cannot open media source" What gives?
View 2 Replies View Related
