Software :: Configure Error: Readline Library Not Found
May 8, 2010
configure: error: readline library not found If you have readline already installed, see config.log for details on the failure. It is possible the compiler isn't looking in the proper directory. Use --without-readline to disable readline support. Now I tried to yum install readline-devel and the result was failure as below:
So I am thinking that maybe I have to tell configure where my readline libraries are. From the above, it looks like readline-6.0 is not on my computer, even though I went through the configure/build/install process for it.
I am trying to install ald: [URL].. As said in the installation manual, I execute "./configure" and then "make". In the middle of the compilation It aborts and return the following error: readln.c:25:31: error: readline/readline.h: No such file or directory. readln.c:30:30: error: readline/history.h: No such file or directory
In the process of installing DDD, I get the following error:The X11 library could not be found. Please use the configure options '--x-includes=DIR' and '--x-libraries=DIR' to specificy the X location.I did a "yum install libx11-devel". I was told that the right package was installed
I tried to compile one software. After I typed "./configure", there is an error:error: GSL CBLAS library not foundI installed GSL 1.9 library --- When I was installing, it was like this:
make install Making install in gsl make[1]: Entering directory `myDir/gsl-1.9/gsl'
I am not all that experienced with Linux configure scripts for building source. I downloaded a vmime library source package. One of the dependencies it has is on another open source lib - gsasl. I had no trouble building the gsasl lib.
But I cannot figure out how to let the vmime configure script know that I have built the gsasl package. Here is the end of the output of the vmime configure script:
checking for char... yes checking size of char... 1 checking for short... yes checking size of short... 2 checking for int... yes checking size of int... 4
./configure script fails to configure libsf. Please check the following last few lines of configure script error.
But find command shows the following;
It seems the file libdb does exist. man dbopen displays man page for dbopen. I also tried to ln -s /usr/lib/libdb.a and libdb.so /lib dir but all were in vain.
I'm using Ubuntu 9.10 'Karmic Koala' and when trying to install from source any program using C++, in this example kpictorial, I get this:
checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c
[Code].....
I have qt3, qt4, the -dev packages and the headers and libraries installed. I have just about everything you can have for qt installed trying to fix this. The qt files are under /usr/include and the source code files are under /usr/src.
I need to install libssh2 on my CentOS 32bit server to get ssh2 extension of PHP working, after installation of this rpm, I still can't run "pecl install ssh2-beta" because it give me this error: configure: error: The required libssh2 library was not found. You can obtain that package from [URL] ERROR: `/tmp/tmp2ImZz1/ssh2-0.11.0/configure --with-ssh2=/usr' failed
I'm trying to install ffmpeg however I always get an error when I run ./configure. I know xvid is compelled into the dir below, this is the output from the xvid make install.
Then from the ffmpeg directory I run ./configure --prefix=/usr --libdir=/usr/local --enable-libmp3lame --enable-libxvid --enable-gpl --enable-shared ERROR: libxvid not found
I'm pretty new at working with Linux/Unix systems, just started dealing with the CLI a week or two ago at work so bear with me if my questions/problems seem obvious, they probably aren't to me. URLs are at the bottom since I can't hyperlink to them. We have a server with Red Hat Enterprise Linux Server release 5.2 (Tikanga), x86_64 GNU/Linux. For the past few days at least (not sure when it began) every five minutes we get two messages for CPU0 and CPU1 saying: "Temperature above threshold, cpu clock throttled". Occasionally it says they are normal, so they're not *always* above the threshold but a majority the time.
The server doesn't have internet, so I interact with it and transfer files via ssh/telnet/sftp from my Windows PC to another server running Fedora release 10 (Cambridge) to the RHEL5 server. I have been trying to install lm_sensors to try and read the CPU temperature and possibly the fan speed, but every installation method has failed. I have tried installing it via the yum command I read about on this page (URL 1), but since it doesn't have internet access it didn't work. I then tried manually installing using the instructions on the lm-sensors.org page (URL 2), but whenever I try to install anything (gcc, libtool,
libsysfs) it shows: checking for gcc... no checking for cc... no checking for cl.exe... no configure: error: in '/home/user/src/libtool-2.4': configure: error: no acceptable C compiler found in $PATH
I then looked up how to install gcc, but when I found a .rpm file of gcc 4.1.2 for RHEL5 I tried installing that like it mentions here (URL 3), but there are lots of [dependancy] programs I can't find a .rpm for as it seems they are all outdated and hard to find for RHEL5. Do I need to find the installation CD in order to install gcc? And is there any other way to check the cpu temperature or to know how to disable/fix the messages about temperature being above threshold?
Anyone recompiled Empathy on Fedora? I have problem of configure and make as following:
checking for LIBEMPATHY... configure: error: Package requirements ( glib-2.0 >= 2.16.0 gobject-2.0 gio-2.0 >= 2.16.0 gio-unix-2.0 >= 2.16.0 libxml-2.0 telepathy-glib >= 0.7.31 libmissioncontrol >= 4.61 telepathy-farsight farsight2-0.10 gstreamer-0.10 ) were not met: No package 'telepathy-glib' found No package 'libmissioncontrol' found No package 'telepathy-farsight' found No package 'farsight2-0.10' found No package 'gstreamer-0.10' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. Alternatively, you may set the environment variables LIBEMPATHY_CFLAGS and LIBEMPATHY_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.
i was installing php5.3 on my system nd i followed d procedure
./install after processing man lines it said checking for xml2-config path... configure: error: xml2-config not found. Please check your libxml2 installation.
I am trying to install kcachegrind and during the ./configure phase I got the following error: Checking for Qt... configure: error: Qt (>= Qt 3.0) (headers and libraries) not found. Please check your installation!
Now I guess I have QT installed and I tried to do the following: ./configure --with-qt-includes=/usr/lib64/qt4/include but that did not work either.. actually checking further I found that the folder include is missing in usr/lib64/qt4/ !!!!
I just installed RedHat and I need to install a compiler (among other things). When I go to 'configure' gcc I get:
configure: error: in `/Compiler': configure: error: no acceptable C compiler found in $PATH
Why in the world would you require a compiler on the install of your compiler!? I may be dumb in many respects, and I'm sure that people will attest to that, but I'm not that dumb...How do I install gcc without a compiler? What, specifically, do I do with the configure script (or executable, I don't know what it is...)
I'm having some problems compiling mednafen on Suse 11.4. When I run configure, things work fine until I get the following series of errors:
[Code]...
configure: error: *** OpenGL header file not found! I've seen references in a few places that these type ("Present But Cannot Be Compiled") can usually be ignored, but in this case ./configure fails and I can't make. I am unsure why this is, as I've installed mednafen on Suse 11.4 before and it runs fine. I've tried installing various OpenGL-related packages that I can find (Mesa, freeglut, glib, etc) but nothing seems to solve the problem
Fedora 14 I recently went to install some software using the source files. When I ran the command ./configure I got a message saying that No package gthread-2.0 not found After searching the internet some one had the same problem. I needed to install a package called glib2-devel However, rather that searching the internet. Is there any yum command that can give me that information?
i'm using slackware 13.0 with glib2-2.18.4-i486-1 and gtk+2-2.14.7-i486-4 i need to install newer gtk+2, i've installed glib-2.25.7, but in my home directory, so how do i configure the gtk+2, so it points to the glib library path in my home directory. i've tried this command
iwant to install julius 3.5.2 on my system but i have an error after compiling the file configure the error is flex library is not found so what i have to do
I'm trying to install gazebo but I would like the general solution. When I type "./configure" I get the error: "could not find gdal_priv.h" or sometimes "could not find gdal library" But I have it on my computer. It is: usr/include/gdal/gdal_priv.h This means configure is not looking in the right place for this library. Where is the path stored, please? I tried reading the configure file but I could not find it. I tried to replace all instances of gdal_priv.h by gdal/gdal_priv.h but this did not work either. I tried adding /usr/include/gdal to all the env PATH_something_or_other I could see. how to tell to ./configure where to look for libraries. What file(s) should I edit? (I tried config.status, because it contains /usr/include stuff). The files I have are:
