If I use any Synaptic function or apt-get install I receive the following message;
E: grub-pc: subprocess installed post-installation script returned error exit status 10
I have tried to reinstall but still have the error. I'm running;
Home built
MSI K9N6PGM 2V mainboard
AMD Phenom Black Triple core
2 gig RAM
Ubuntu 10.04
I can't get any updates for my system and keep getting the errors shown below, and suggestions peeps?
E: linux-image-2.6.28-11-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-13-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-14-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-15-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-19-generic: subprocess installed post-removal script returned error exit status 1
I dont know how to put this that somobody would understand my problem but here we go. I have problem like said in title.I am unable to upgrade my kernel. Sunaptics says that I have 2.6.35-28 installed. I tried to reinstall 2.6.35-28 via synaptics but it gives me error.
Thats what uname -a says:
pekka@pekka-laptop:~$ uname -a
Linux pekka-laptop 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:48 UTC 2011 i686 GNU/Linux
Tried to install 2.6.35-27 via terminal thats what I get:
Code:
pekka@pekka-laptop:~$ sudo apt-get install linux-image-2.6.35-27
[sudo] password for pekka:
Reading package lists... Done
Building dependency tree
code....
dpkg: error processing linux-image-2.6.35-25-generic (--remove):
subprocess installed post-removal script returned error exit status 1
Errors were encountered while processing:
linux-image-2.6.35-25-generic
E: Sub-process /usr/bin/dpkg returned an error code (1)
pekka@pekka-laptop:
I have a dual boot system with ubuntu 9.10 x64 and Windows 7. Everything has been working fine for a a long time but yesterday I tried to delete an unused partition through the Disk Utility in ubuntu (System->Adminstration->Disk Utility) and everything was messed up. I used to get the "Grub error: Unknown filesystem". I managed to create an ubuntu bootable usb and followed some tutorials for fixing grub but all i managed to do is to get another error: "Grub error: No such disc". After some experimentation i got
"Grub stage 1.5" which gave me a grub> command prompt./dev/sda is the drive containing Windows and Ubuntu.
Code:
[ Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #6 for /boot/grub/stage2 and /boot/grub/menu.lst.
[code].....
I am new to Linux. I have installed RHEL 5.4 on my PC with preloaded Windows XP.
Windows was set as the first boot kernel. So if i do not choose which OS to be loaded it will load Windows by Default.
Today I got an error saying GRub Loading Stage2 read error.
I was installing SMPLAYER when the power failed...now i get this error message when trying to re-install the packages..
E: liblzo2-2: subprocess installed post-installation script returned error exit status 2
E: mplayer-nogui: dependency problems - leaving unconfigured
E: mplayer: dependency problems - leaving unconfigured
[code]....
I have just upgraded to Lucid on Ubuntu. I am a long time Pidgin user. I tried using Empathy with Gwibber, but I can't get Gwibber to update my IM status(es) in Empathy, so I want to go back to using Pidgin. (Additionally, I can't get Skype to work with Empathy.)I installed pidgin-microblog and pidgin-mbpurple, and they allow me to view my Twitter feed in Pidgin and update my Twitter status in Pidgin. However, in Karmic, I was also able to specify certain "status availabilities" (one named "Twitter-Available" and one named "Twitter-Away", for instance) to have the IM status message for these statuses become populated with my Twitter feed. This capability seems missing in pidgin-mbpurple in Lucid (and it seems to be the only thing missing from Karmic).
Is there a way to have pidgin-mbpurple update certain "status availabilities" in Lucid (and I'm just missing something) or is this no longer possible?Equivalently, is it possible to have Gwibber update my status message in Empathy? (I just want to be able to update my status once on one of my three computers - and have it propagate to all my other accounts (IM and social networking) and computers).
I'm having a problem accessing a network share in windows 7 from Ubuntu 9.10. I can access this share from a Vista computer on the network, but not from Ubuntu. Windows 7 can also connect fine to my Ubuntu Samba shares. I get the following error when trying to connect with SMBclient.
Code:
smbclient -L KRONOS
Domain=[KRONOS] OS=[Windows 7 Ultimate 7600] Server=[Windows 7 Ultimate 6.1]
Sharename Type Comment
--------- ---- -------
Error returning browse list: NT_STATUS_NOT_SUPPORTED
Domain=[KRONOS] OS=[Windows 7 Ultimate 7600] Server=[Windows 7 Ultimate 6.1]
Server Comment
--------- -------
Workgroup Master
--------- -------
I'm running Ubuntu 9.10 Karmic and XBMC Live.I get error messages which seem to relate to openvpn.So I tried to remove it with the remove command. This is what I getQuote:
@XBMCLive:/home$ sudo apt-get remove openvpn
Reading package lists... Done
Building dependency tree
[code]....
"E: backuppc: subprocess installed post-installation script returned error exit status 1"whenever I upgrade my system I get the above message Anyone know how to fix it? or if it's anything important ?
View 1 Replies View RelatedAfter installing a new Rhel6.0 64bit on VMWare i got the information:
{
disabling swap...
/dev/dm-1
unmounting filesystems...
/mnt/runtime done
code....
I can't seem to get BOINC to run on F12. I've installed it from the repositories and downloaded it from the BOINC website. I keep getting an error message "Error Retrieving current status".
View 4 Replies View Relatedwhen i try to use apt an error occurs: dpkg: parse error, in file '/var/lib/dpkg/status' near line 27317 package 'virtualbox-3.0': error in Version string `3.0.4-50677_Debian_lenny': invalid character in revision number E: Sub-process /usr/bin/dpkg returned an error code (2)
i tried to :
1- replace the file status with status-old
2- replace it with all the backups located in /var/backups/
and the same error occurs
When I try and boot my Debian computer I get the messages: Grub Loading stage1.5. Grub loading, please wait... Error 15 Is there any way of recovering from this - or is it simply a fresh install? I was attempting an upgrade from Lenny to Squeeze and despite a few hurdles it looked like it was all happening. Got the new kernel loading, and the new grub. It looked as though grub2 was working so I ran the grub-remove-legacy-support command (something like that) and now my computer won't boot grub or Linux.
I'm assuming the MBR on my harddrive is lost, however I don't know what state the partition is in. I'm guessing that maybe this has been lost as well. I tried a few tools from the Ultimate Boot CD but nothing here was able to re-install my grub or boot from any partition or even mount my file-system. I'm fearing the worst but would like it confirmed before I blow it all away with a new install.
I have openvpn server configured with bridged interface on my openwrt router. The client is running ubuntu 9.10 with config:
Client
dev tap
proto udp
remote x.x.x.x 1194
resolv-retry infinite
nobind
persist-key
persist-tun
ca /home/blwegrzyn/openvpn/ca.crt
cert /home/blwegrzyn/openvpn/client1.crt
key /home/blwegrzyn/openvpn/client1.key
comp-lzo
verb 5
(x.x.x.x was hidden)
When the client connects the log says:
WRRRWRSat Jan 9 20:16:03 2010 us=332404 PUSH: Received control message: 'PUSH_REPLY,redirect-gateway,dhcp-option DNS 192.168.1.241,route-gateway 192.168.1.254,ping 10,ping-restart 120' .....
Sat Jan 9 20:16:03 2010 us=343906 ERROR: Linux route add command failed: external program exited with error status: 7
The server is trying to push default gateway 192.168.1.254 to the client and the client is on 192.168.2.0 network as you can see the route addition fails with SIOCADDRT: No such process. This is because the tap interface does not have any ip and the route addition is not possible. The tap interface is not getting the dhcp address through the tunnel, not sure why (this works on XP). To fix the problem I must manually add the ip to the tap interface, and the default gateway, but then i must add dhcp server to resolv.conf to make it work and once I disconnect the computer does not know the old valid dhcp anymore and cannot communicate. Why openvpn cannot get the ip automatically? Why it cannot grab the dhcp from the tunnel? Is it related to the wireless card being managed by the network manager? This works perfect on windows machine (xp sp3).
it's a hot day and nothing seems to be going right. Trying to figure a way out of this one - error 127. Looks like it could be Metacity problem? There a couple of pythons that also have a problem.
Code:
(Reading database ... 145089 files and directories currently installed.)
Preparing to replace metacity-common 1:2.28.0-0ubuntu1 (using .../metacity-
[code]....
Looks like my package manager was severely screwed. Any package manager-related command I try to run results in the following message in the console:
Code:
E: Read error - read (5: Input/output error)
E: The package lists or status file could not be parsed or opened.
Anything - aptitude, apt-get.
I removed all my sources.lists, I tried running apt-cache clean It didn't help. This is really serious. Not only am I unable to do anything with packages (update, remove, install), but the machine is really slow because of this.
I have been having the worst time trying to get sametime messenger from IBM to install properly. I had it working fine for the last 6 months and yesterday I accidently updated and it all went to {1134}. I seem to have found dkms to be the source of the problem.
I get an exit 0 regardless of whether or not its install or uninstall. I have managed to get pidgin to work for now, but it is no means ideal for my purposes.
I kept getting this...
rastlosen@rastlosen-laptop:~$ sudo apt-get install sametime-connect
[sudo] password for rastlosen:
Reading package lists... Done
Building dependency tree
[Code]...
I am trying to install Matlab v. 7.10 on my Ubuntu machine. I was able to successfully download the necessary files. However, when I attempt to install using ' ./install ', I get the following error message:
Finished extracting ftp files.
Starting installer ...
An error status was returned by the program 'xsetup', the X Window System version of 'install'.
The following essages were written to standard error:
/home/user1/mathworks_downloads/update/install/main.sh: 178: /home/user1/mathworks_downloads/update/bin/glnxa64/xsetup: not found
Attempt to fix the problem and try again. If X is not available or 'xsetup' cannot be made to work then try the terminal version of 'install' using the command:
install* -t or INSTALL* -t
Sorry! Setup aborted . . .
I tried using the command instal* -t, as recommended by the program, but then I get this error message:
Finished extracting ftp files.
Starting installer ...
awk: cmd. line:2: BEGIN { found = 0; extra = 9; min = 24; default = 24 }
awk: cmd. line:2: ^ syntax error
awk: cmd. line:6: if (nrows < min) nrows = default
awk: cmd. line:6: ^ syntax error
awk: cmd. line:12: END { if (found == 0) print (default - extra) } .....
Everytime I install a package or use update manager I get the following message.
Code:
E: linux-image-2.6.32-22-generic: subprocess installed post-installation script returned error exit status 2
E: linux-image-2.6.32-23-generic: subprocess installed post-installation script returned error exit status 2
E: linux-image-2.6.32-24-generic: subprocess installed post-installation script returned error exit status 2
E: linux-image-generic: dependency problems - leaving unconfigured
E: linux-generic: dependency problems - leaving unconfigured
E: linux-headers-2.6.32-22-generic: subprocess installed post-installation script returned error exit status 2
E: linux-headers-2.6.32-23-generic: subprocess installed post-installation script returned error exit status 2
E: linux-headers-2.6.32-24-generic: subprocess installed post-installation script returned error exit status 2
E: linux-headers-generic: dependency problems - leaving unconfigured
The install/upgrade appears to work but I'm getting concerned about the message continuing for so long.
Hi,
Can you help me to install OpenCS PKCS on Ubuntu 10.10 with Firefox 3.6.
I have smard card reader Gemplus
Here is error:
HTML Code:
dejansoftware@ubuntu:~$ pkcs11-tool --show-info
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
Error: can't open /var/run/openct/status: No such file or directory
[code]....
Attempting to install Abyss Web Server on my 64 bit laptop. i have done mkdir ABYSS to create the ABYSS directoty to install the server to. Command cd ABYSS then "tar xzfm Abyss Web Server installation package" as per instructions. Result tar (child) Abyss cannot open; No such file or directory tar: (child) Error is not recoverable: exiting now tar Child returned status 2 tar: Error is not recoverable: exiting now likely .
View 5 Replies View RelatedI'm using ubuntu 10.10 maverick, a package named lmodern is not required by the system, but it can't be remove or purged as follow:
Code:
yurippe@Neptune:~$ sudo apt-get autoremove
Reading package lists... Done
[code]....
I just installed a fresh copy of 11.2 I use networkmanager and the cisco vpn plugin (not the cisco client). I create a vpn profile and connect to it. The icon shows a connection has been established, but I have no network connectivity. In the /var/log/NetworkManager file, I see this
Code:
Dec 19 13:28:08 TonyLaptop nm-dispatcher.action: Script '/etc/NetworkManager/dispatcher.d/netcontrol_services' exited with error status 127.
When I sudo vpnc and connect that way, it works fine, it connects and I can pass traffic.
I am using opensuse 11.2x86
firewall is disabled
Gnome
Newbie (again) trying to break the ties with Microsoft.Installed 11.2 this afternoon and have been fighting it ever since.I had an issue with the HLPIP Status Service stating "No system tray detected on this system. Unable to start, exiting". When I clicked "ok" I was presented with a blank destop and the widget icon in the corner.As I'm dual booting I was able to get back to M$ and determine this is an issue with the HP drivers and that I could add widgets to the desktop in order to use the OS. I've done that and have been able to get Yast running to update the drivers, didn't help, so I deleted the HP drivers for now.I can now boot into OpenSuse but I'm presented with my desktop full of widgets.
View 1 Replies View Relatedyesterday i tried to install bt4 from alongside ubuntu 10.04. Unfortunately the DVD had some errors and the installation stopped. Everything was fine till then, even the GRUB was working(i guess!) but when i tried to log into my Ubuntu it gave me an error... " /usr/lib/libgconf2-4/gconf-sanity-check-2 exited with error status 256" also there was a popup like "gnome power management was not properly installed ....blah blah blah Contact you network admin"
i have only one user on that system. i tried the single user mode but no success... i then tried to Ctrl+Alt+F1-F6 no success... can't switch to command line(this is my display problem i guess)
i have now decided to install a fresh install but i do need to take the backup. What all should i copy to the new install so that i get the same feel as before?
I met some problems with installation of Matlab2010a for Unix.My edition of ubuntu is 10.04 and I downloaded an iso file of ubuntu and extract that in this document: /home/edwardli/temp/Mathworks.Matlab.R2010a.UNIX/
when I start to install, it showed :
------------------------------------------------------------------
An error status was returned by the program 'xsetup',the X Window System version of 'install'. The following messages were written to standard error:
/home/edwardli/temp/Mathworks.Matlab.R2010a.UNIX/update/install/main.sh: 178: /home/edwardli/temp/Mathworks.Matlab.R2010a.UNIX/update/bin/glnx86/xsetup: Permission denied[code].....
I'm working on a friend's Samsung R530, Intel Core i3 3330M (T430) processor. It had Windows 7 installed, which crashed so I'm trying to recover the files before installing Ubuntu (the recovery partition is gone, there was no facility for making recovery disks and Samsung won't send any out). I put in the Live CD for 10.04 which took ages to load and then gave me the following error message:
udevd (90): worker (181) unexpectedly returned with status 0x0100
udevd (90): worker [180] failed while handling '/devices/pci 0000:00/0000:00:00:00'
which was repeated for [182] and [230] then it all went blank for ages then I got a message saying eject the cd and press enter, just like you do at the end of an install. However, I didn't get an option on whether to boot from the cd or install ubuntu. anyone got any clue what the error message means? and am I correct in thinking that the cd tried to install ubuntu? I've tried 3 different live cds, all of which have previously worked on other machines so I'm pretty sure it's not a cd issue.
But I can't get a single one of them to boot from cd and all throw up the same error messages, except the 9.04 cd, which just hangs. Have also tried a USB live image and got a disk error message. When I try booting from the HDD I get OS not found, boot from cd. Which is not entirely unexpected because of the previous problem with windows but it also seems that Ubuntu hasn't actually installed, or if it has then there's been a problem and it hasn't done it properly.
I ran update through the terminal and rebooted i get this error message on start up and again after I log in Please Help!! I'm running Ubuntu 11.04 using unity 2d and the latest version of Gnome 2 on a Dell Inspiron 5150 laptop There is a problem with the configuration server. (/usr/lib/libgconf2-4/gconf-sanity-check-2 exited with status 32512)
View 5 Replies View RelatedI have a desktop environment with Apache2.(If someone asks why desktop to run Apache2, its because the desktop must display a local website)When I update the html files from a windows box it is being copied in a home/user folder.Cron now has to copy the files with r to the localhost area.sudo cp -R home/myself/Downloads/* /var/www/ works fine:The script containing just that one line is in a file in my /home/myself/Documents folder named: copy_site_localhost.Cron entry in turn was created with the command: sudo crontab -e and the entry is:*/10 * * * * /home/myself/Documents/copy_site_localhostThe error in the syslog file in /var/logs is as follows:
.......CRON[1234] (root) CMD (home/myself/Documents?copy_site_localhost)
.......CRON[1236] error (grandchild #1234 failed with exit status126)
.......CRON{1236] info (No MTA installed, disregarding output)
[code]....