I'm trying to compile a program on Cygwin and it seems like as soon as I solve one problem, another pops up. This time, trying to run configure gets me an error message.
The relevant part of my config.log is included below:
I installed Cygwin with everything that was in the Devel folder, just to be on the safe side.
I'm trying to do a ./configure on ntfs-3g, and I get this error that says "error: C compiler cannot create executables." I have gcc, g++ and everything installed, but I don't have build-essential. It's an offline server so I can't use apt-get to install it. I also can't find an RPM for CentOS. Is that what I need to resolve this? Or is this error caused by something else?
View 8 Replies View RelatedI am trying to compile wine from source.
When I run:
Code:
I get this output:
Code:
I need gcc and g++ installed; I installed both of these through yum.
I have looked through config.log, however I do not know what to look for in there for something that might be the problem.
I was trying to compile xbmc today, and got the error about the c compiler not being able to create executables. I did a search on the forum, and found something from 2004.None of the suggestions there worked for me. I can compile libraries, because I did a few for dependencies. The last thing I compiled with an executable was BloodFrontier, and it works perfectly.
View 14 Replies View Relatedearlier this morning, i compiled Qtcurve with no issues. but now, when i try to compile Avant Window Navigator, i get a strange error. everything begins to compile, it checks dependencies, begins compiling, and then i get this error:
Code:
checking for C compiler default output file name...
configure: error: C compiler cannot create executables
[code]...
When I tried to install a software, quantum-espresso [URL], I failed to install "espresso-4.2.1.tar.gz"and got a message as the following:
[espresso-4.2.1]$ ./configure
checking build system type... x86_64-unknown-linux-gnu
checking architecture... x86_64
checking for ifort... ifort
[Code]....
My server is Dell PowderEdge SC1430 (intel CPU) where CentOS 5 and ifort11.0 are installed.
I'm pretty new at working with Linux/Unix systems, just started dealing with the CLI a week or two ago at work so bear with me if my questions/problems seem obvious, they probably aren't to me. URLs are at the bottom since I can't hyperlink to them. We have a server with Red Hat Enterprise Linux Server release 5.2 (Tikanga), x86_64 GNU/Linux. For the past few days at least (not sure when it began) every five minutes we get two messages for CPU0 and CPU1 saying: "Temperature above threshold, cpu clock throttled". Occasionally it says they are normal, so they're not *always* above the threshold but a majority the time.
The server doesn't have internet, so I interact with it and transfer files via ssh/telnet/sftp from my Windows PC to another server running Fedora release 10 (Cambridge) to the RHEL5 server. I have been trying to install lm_sensors to try and read the CPU temperature and possibly the fan speed, but every installation method has failed. I have tried installing it via the yum command I read about on this page (URL 1), but since it doesn't have internet access it didn't work. I then tried manually installing using the instructions on the lm-sensors.org page (URL 2), but whenever I try to install anything (gcc, libtool,
libsysfs) it shows:
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: in '/home/user/src/libtool-2.4':
configure: error: no acceptable C compiler found in $PATH
I then looked up how to install gcc, but when I found a .rpm file of gcc 4.1.2 for RHEL5 I tried installing that like it mentions here (URL 3), but there are lots of [dependancy] programs I can't find a .rpm for as it seems they are all outdated and hard to find for RHEL5. Do I need to find the installation CD in order to install gcc? And is there any other way to check the cpu temperature or to know how to disable/fix the messages about temperature being above threshold?
I just installed RedHat and I need to install a compiler (among other things). When I go to 'configure' gcc I get:
configure: error: in `/Compiler':
configure: error: no acceptable C compiler found in $PATH
Why in the world would you require a compiler on the install of your compiler!? I may be dumb in many respects, and I'm sure that people will attest to that, but I'm not that dumb...How do I install gcc without a compiler? What, specifically, do I do with the configure script (or executable, I don't know what it is...)
mysql -u root -p but unable to create any database.
if i tried to configure it's giving error ERROR 1006 (HYOOO) : can't create database 'test' (error: 2)
my location for database is /var/lib/mysql and permissions are
drwxrwxrwx mysql root.....
i have installed on my home PC CentOS 5.5, and downloaded Python 3.1.3 source, when I have tried to run the configuration file I have got
checking for --enable-universalsdk... no
checking for --with-universal-archs... 32-bit
checking MACHDEP... linux2
checking machine type as reported by uname -m... x86_64
[Code]....
I have tried downloading gcc and installing it, but got the same message. So, I can't find any C compiler, and I can't install one.
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for gcc... gcc
checking for C compiler default output file name...
configure: error: C compiler cannot create executable
See 'config.log' for more details.
This is error that I keep getting every time. Iam using fedora 10 version and I keep getting this error while i was trying to insatl madplay for vlc source code compilation. I have insatalled libmad .0.15.1,libid3tag.0.15, I got these codecs from [URL] and vlc sorce code is from [URL]. Config.log file details are:
hostname = localhost
uname -m = i686
uname -r = 2.6.27.5-117.fc10.i686
uname -s = Linux
uname -v = #1 SMP Tue Nov 18 12:19:59 EST 2008 .....
configure: exit 78
I'm looking to create a server (probably LAMP) i need all my programs to install at one time. SOME of my programs are not in the repos and all of them aren't .deb. Some of them are .rpm. I also can't guarentee internet connection, at least not during install, so no apt-get. on a note about the internet i'll probably be getting clear internet. I also plan to connect to the server from my phone and other computers. I know the server needs a static ip but what other configuration does it (should it) need.
View 11 Replies View Relatedwhat my intension is i want to cross complile vlc source code into arm9 mini 2440 target board for that i am compiling vlc source code in intel desktop pc which has fedora 10 version. so that in order to compile vlc source code we need to install following codecs those are libmad 0.15.1b,libid3tag-0.15.1b,madplay-0.15.1b,i got these codecs from h[URL] .and vlc sorce code from [URL]. i have successfully compiled libmad 0.15.1b and libid3tag-0.15.1b . those two are compiled in the following way [color] ./cofigure --prefix=/home/narendra/lib/ make make install [/color]
i was trying to compile madplay-0.15.1b in the following way
Code:
./configure --prefix=/home/narendra/madplay-0.15.1b CPPFLAGS="-I /home/narendra/lib/libmad-0.15.1b/include/" LDFLAGS="-L /home/narendra/lib/libid3tag-0.15.1b/lib/"
after this command i keep getting this error message
[Code]....
I have been trying to install MATLAB 2008b as a standalone version; however, every time when the process runs to 18% it shows an error as follows: "There was an error extracting the archives for MATLAB compiler. Chceck that you have enough disk space and rerun the installer."
I did have checked the disk space which is much more than enough. I have also changed few different disks that are way more than enough as well, about 5GB at least, but this error still popped out when it runs to 18%.
i tried to install gcc-4.5.0 on opensuse 11.2 I gave ./configure but it gave the error couldn't find the c compiler.. the message was
[Code]....
m using fedora 13 gnome while installing glib m getting error
configure: error: *** Working zlib library and headers not found ***
I'm using 10.04. I got TADS through synaptic packet manager, and have the interpreter. I would like to write some code but cannot find the compiler. I was wondering if anyone that has used TADS to write code could tell me how they got the compiler set up.
View 1 Replies View RelatedI am trying to compile x264 but ./configure returns just Quote: No working C compiler found. Yes, I have installed build-essentials and yes, I have installed gcc Already tried update and upgrade... so I dont know whats wrong my c++ compiler works normally.
View 1 Replies View RelatedI managed to figure out how to issue out the CC compiler command by issuing a symalink to the usr/bin I have now have this problem when I try to compile any C++ code I recieve this error
"/usr/include/stdio.h", line 485: Error: "(" expected instead of "__attribute__".
I went on the sun forums and they dont or give a solution due to Fedora not being test when developing this tool, so I was wonder if I could run into someone who has a solution to this problem
This is my last road block so I can fully finish my programming assignment
I am using a arm compiler to build my program but getting following compiler error at the end -
init.c.text+0x2c): undefined reference to '__libc_csu_fini'
init.c.text+0x34): undefined reference to '__libc_csu_init'
Have just installed Red Hat on my HP machine (previously running Windows). Thereafter I've been struggling to install various software like flash, media player etc.While most have been successful with much help from this forum, am stuck with the installation of xine media player. also my 320GB external HDD (in NTFS format) is not being read by the system. I downloaded some ntfs drivers but am getting the same C compiler error.
View 2 Replies View RelatedI am using the C++ compiler G++ to compile my programs on Linux Mint 8 - Gnome.
I recently installed QT and when I tried to compile a simple "Hello World!" program it gave me this error:
Quote:
This is the code in HelloWorldQt.cpp:
Code:
I have tried using GTK instead but I get a similar error.
So for those of you who has built GCC from source would know that you can't install GCC without an existing GCC. So my question is, what would happen if all computers in the world suddenly just died, and all you had was the computer in front of you, and a copy of GCC 4.5. How would you install that?
I ask because I would like to install GCC 4.5 on my old powerbook G4 mac without installing a binary GCC provided by Tiger 10.4 disks. I would like to build GCC from source, without an existing GCC to complicate updating.
i'm a new on linux system and i have a problem with SUSE 9.1. I google for yast repositories to install "gcc" but i only see for release 10+. So i think 9.1 version it old version. The thing is that i can't upgrade the SO because it's a "sever" for some applications, and my problem is that i need to install Nagios, but when i type the ./configure command its says:
checking for a BSD-compatible install... /usr/bin/install -c
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for gcc... no
checking for cc... no
checking for cl.exe... no
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.
So I decided to install packages with yast, but i can't find any active repository. I very new on this, and i don't know if i'm doing right the things. Also i don't have too much practice on english.
This is the info of the SO
* uname -a:
Linux noc 2.6.5-7.111-default #1 Wed Oct 13 15:45:13 UTC 2004 i686 i686 i386 GNU/Linux
* cat /etc/SuSE-release
SuSE Linux 9.1 (i586)
VERSION = 9.1
I am getting this message: internal compiler error: Segmentation fault
Please submit a full bug report,
with preprocessed source if appropriate. for every compilation that takes longer (ie: linux kernel, kde sources etc.)
I've tried other OS (at that moment I was on Fedora 12, now on Debian; was a Suse also) and it didn't work. I've tried replacing my hard disk, since it needed an upgrade either ways - that didn't work either. I assumed that it's the RAM fault - tested them with memtest and it says they are fine. Does anyone know what else I can do in order to figure out where the problem is?
I am trying to install Apache on my remote server. I've downloaded the latest Apache Http Server and when I configure it I get this error: configure error: No acceptable C compiler found in $PATH. So I download and extract the latest GCC Compiler and when I try to install that I get the same error:
configure error: No acceptable C compiler found in $PATH I am really stumped... Can anyone just offer ideas. My server is running CentOS 5.4 x64 and I'm remotely trying to download and install a running LAMP setup for Joomla. I'm using a shell to communicate with a cloud server type.
I am using Red Hat Enterprise 5 and have downloaded GCC 4.4.5 and trying to install or configuring the same, but getting some problem.
Code: # mkdir objdir
# cd objdir
# srcdir/configure Output of command
Code: checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
[Code]...
configure: error: no acceptable C compiler found in $PATH See `config.log' for more details. this to install GCC package.
I have been trying to install MPICH2 on a server node for a cluster I am building running RedHat 5.5, and when running the "configure" shell file, it gives me the error message: "configure:4533: error: no acceptable C compiler found in $PATH." I tried to install the gcc c-compiler from the installation disk, but it had the dependency "libgomp.so.1()", which I cannot find on the disk nor on any web site. Where can I find this dependency or get a different c-compiler?
View 5 Replies View RelatedI am facing an amazing problem with GCC compiler. When I copy any C code from any documents or texts and paste at gedit and try to compile it with using GCC compiler, it gives error. But when I typed the same code, it executes.
View 6 Replies View RelatedWhen I try to install wxGTK SlackBuilds. I get this error:
Code:
./src/aui/auibook.cpp: In member function 'size_t wxAuiNotebook::SetSelection(size_t)':
./src/aui/auibook.cpp:3482: internal compiler error: Segmentation fault
Please submit a full bug report with preprocessed source if appropriate.
See [URL] for instructions.
make: *** [auidll_auibook.o] Error 1
I tried redownloading the wxGTK-3.8.9.tar.gz file and reinstalling it, I get the same error.
