OpenSUSE Network :: WARNING: /lib/modules/2.6.31.12-0.1-desktopp/kernel/drivers/net/wireless/wl12xx/wl12xx.ko Needs Unknown Symbol_ieee80211_rx
Feb 25, 2010
I'm struggling to get my wireless connection working. During an install of the compat-wireless-kmp-desktop driver a warning occurs:
WARNING: /lib/modules/2.6.31.12-0.1-desktopp/kernel/drivers/net/wireless/wl12xx/wl12xx.ko needs unknown symbol_ieee80211_rx
and
Symbolieee80211_beacon_get
What can I do next to get this to work? Running Opensuse 11.2 on Asus 1005PE.
View 5 Replies
ADVERTISEMENT
Dec 14, 2009
I'm trying to install some wireless drivers, but apparently I don't have a /lib/modules/<kernel>/build directory, which is causing the Makefile to throw an error. Is there a specific place I should point the Makefile at?
View 9 Replies
View Related
Mar 23, 2011
I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
View 5 Replies
View Related
Aug 3, 2010
Used to work perfectly. I attempted to install VPN client, result is can't connect to anything. Networks are seen by network manager, nothing happens when click connect. Results below:
Wireless LAN present in Hardware information. Atheros AR242x 802.11abg Wireless PCI Express Adapter (wlan0)
Kernel Driver: ath5k
168c:001c
/var/log/boot.msg
[code]....
Advice is to use output of dmesg command to find problem, but as above I don't get any results for this in terminal.
attempt to ping external site
linux-cfi6:~ # ping -c 66.70.73.150
Usage: ping [-LRUbdfnqrvVaA] [-c count] [-i interval] [-w deadline]
[code]....
View 1 Replies
View Related
Mar 10, 2011
0 down vote favorite
share [fb] share [tw]
This is the problem I run lspci -v which checks all drivers on my system and more. It says kernel driver in use is nouveau. Then under that it says kernel modules: nvidia recent, nvidia-96, nouveau, nvidiafb. So what it looks like I have 3-4 drivers for my video card loaded and one, nouveau, being used. I think they conflict with each other.
I'm trying to add drivers other then nouveau, because the mouse freezes with it. At this point I can't seem to get rid of nouveau, I go to terminal and type:
sudo apt-get --purge remove xserver-xorg-video-nouveau
And it says that it's not loaded so I can't dump it. lspci-v says nouveau is the driver being used and trying to dump it. It says it isn't installed. I'm confused. I want to dump nouveau, what should I do? I also go into Synaptic package manager and it isn't listed as being installed.
View 1 Replies
View Related
May 15, 2010
I am trying to use my Wiimote with ubuntu. I have followed the guide on here:[URL].. But I get this error when I run modprobe:
FATAL: Error inserting uinput (/lib/modules/2.6.32-22-generic/kernel/drivers/input/misc/uinput.ko): Operation not permitted
View 2 Replies
View Related
Jun 15, 2011
I have, for days, been trying to get a Fedora 15 server to send audio output to the system monitor, an ASUS VH242H, via HDMI. The video portion works perfectly, allowing me to appreciate GNOME 3 for the first time. Sound, on the other hand, is non-existent.
From many, many threads on this problem, I have at least been able to provide some info which might help resolve this. Unfortunately, I have now read too much and followed too many suggestions to be able to find my way through the morass. So, once again, I built a completely new system to ensure a clean start.
Note also that to simplify things, I disabled the on-board audio in BIOS so only Nvidia has any sound output capability. Initially, 'alsamixer -V all' identifies the card and the chip as being PulseAudio. That would change if I used the <F6> option but I have not done so to keep things 'clean' at this point. The 'Master' is full on (100<>100), so muting is not a problem. Next, I searched for the device from the output of /proc/asound/card0 which would match the monitor.
The one device associated with the monitor_name is eld#3.0:
monitor_present 1
eld_valid 1
monitor_name ASUS VH242H
[code]...
Both the kernel driver and the kernel modules are not what I think I should have. The kernel driver should be HDA NVidia for starters, no? Running modprobe -l and looking for nvidia returns:
'kernel/drivers /video/nvidia/nvidiafb.ko'and 'extra/nvidia/nvidia.ko' But I have not attempted anything beyond this point because I am just too confused as to what needs to be done and who or what manages these values effectively.
View 5 Replies
View Related
Jul 6, 2010
i just tried to install Ubuntu Netbook 10.04 on my old Amilo Lifebook P Series. But after the boot screen and the choice to install Ubuntu i get stuck at the Ubuntu screen with the little dots on the bottom If I hit esc i can see the warning (process 257): GLib-WARNING **: getpwuid_(r) failed due to unknown user id (0)
View 2 Replies
View Related
May 5, 2010
I tried posting this before and I'm not sure what happened but I don't think it worked, so if it did please forgive the double post.am very very new to centOS and linux in general. I just want to setup a test web server that more closely mirrors our actual web server that is hosted by rackspace. I've installed centOS and tried to setup Apache, PHP and MySQL from a guide on the web using Yum. When I go to localhost in the web browser I'm able to see the default apache page. However when I create a php page it's just blank.When I look at the apache error logs I get this: PHP Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0
I've been searching alot on the internet and I know the issue is permission related, but I don't know how to fix it. I've seen some forum posts that say you need to use the chmod 775 command on the /var/www/html folder.Currently when I do ls -l /var/www/html it returns
-rw------- 1 root root 19 May 5 13:16 index.php
-rw------- 1 root root 19 May 5 13:15 index.php~
I'm sure that this isn't correct but like I said I don't know much about how to set permissions or who the owner needs to be. I've done alot of searching and seen similar posts, but no one seems to explain it clearly.
View 2 Replies
View Related
Feb 10, 2010
I installed openSUSE 11.2 on virtualbox. My host is windows 7. I tried to install the guest additions, but i get an error saying
Code:
Building VirtualBox Guest Additions Kernel Modules...Failed
(Your system does not seem to be set up to build kernel modules)
How should i go about to let my system build kernel modules?
View 7 Replies
View Related
Jul 22, 2010
I am trying to setup Slacware 13.1 x86_64 to a encrypted partition. I used the README_CRYPT.TXT howto : [URL] At the step when I create an initrd.gz I get this error: Quote: ERROR: No /lib/modules/2.6.33.4-smp kernel modules tree found for kernel "2.6.33.4-smp"
I tried to look into the directory and there was only modules under 2.6.44.3. So I tried to change the command into: Quote: mkinitrd -c -k 2.6.33.4 -m ext3 -f ext3 -r cryptroot -C /dev/sda2
This command was successful, but I don't know if this is alright. I made the changes in lilo.conf, add initrd = initrd.gz. This is all on unencrypted /boot partition. The boot=/dev/sda1 I also set for the unencrypted boot partition. When I boot the system I get a kernel panic:
[Code]....
View 5 Replies
View Related
Apr 7, 2011
I cant get openSuse to find my wifi adapter or it does not have the driver installed.
My wifi adapter is the Realtek RTL8191SE 902.11b/g/n
I found a linux driver on the internet, but it asked me to run make in the console and when I did so it said that it couldn't find make.
how to install make from openSuse without the internet (I'm using my windows partition).
View 7 Replies
View Related
Dec 18, 2010
I have a problem installing mi dlink dlw-g122 wireless usb adapter.I installed the drivers, in fact when executing
ndiswrapper -l
the output is
dr71wu driver present, hardware present
but when I try to execute
modprobe ndiswrapper
I have this error:
FATAL : Error inserting ndiswrapper (/lib/modules/2.6.12.9-386/kernel/drivers/net/ndiswrapper/ndiswrapper.ko): Operation not permetted
View 4 Replies
View Related
Feb 1, 2010
I've got a wireless card and would like to make a driver module for it from the ralink tarball. Here's the details:
1. The Asus PCI-G31 uses the RaLink RT2561/RT61 802.11g chipset.
Code:
lspci
<some output omitted>
04:03.0 Network controller: RaLink RT2561/RT61 802.11g PCI
2. I am using the latest driver download from www.ralinktech.com which is
2009_0123_RT61_Linux_STA_v1.1.2.3.tar.bz2
3. I followed the documentation and I think it makes a script. Here's part of the README from the tarball.
Code:
Build Instructions:
1> $tar -xvzf RT61_Linux_STA_Drv_x.x.x.x.tar.gz
go to "./RT61_Linux_STA_Drv_x.x.x.x/Module" directory.
2> $cp Makefile.4 ./Makefile # [kernel 2.4]
[code]....
View 3 Replies
View Related
Apr 25, 2011
I am trying to install Centos5.6 on an older machine which has a 3com NIC. how I can get the kernel modules for this nic, or do I have to compile a new kernel with this enabled?
View 19 Replies
View Related
Jul 31, 2011
I recently started having this odd behaviour while using and loading cpufrequtils on boot, I don't know if it is happening to someone else.During boot I'm getting( when /etc/init.d/cpufrequtils invokes /etc/init.d/loadcpufreq to load the proper module):
Loading cpufreq kernel modules...FATAL: Error inserting speedstep_centrino (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/speedstep-centrino.ko): No such device
FATAL: Error inserting pcc_cpufreq (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/pcc-cpufreq.ko): No such device
[code]....
View 2 Replies
View Related
May 18, 2010
I'm using asus usb n-11 wireless adapter.Default kernel module drivers/staging/rt2870sta.ko hasn't id of my adapter. Please add this two strings to next kernel release
--- drivers/staging/rt2870/rt2870.h 2010-05-18 13:09:13.262882659 +0400
+++ drivers/staging/rt2870/rt2870.h 2010-05-18 12:10:20.000000000 +0400
@@ -85,6 +85,8 @@
[code]....
View 2 Replies
View Related
Apr 24, 2011
I am trying to install Ubuntu 10.10 from a USB flash memory stick. It works fine until around 95%, where I get the following warning/error:
[Code]....
I click OK and the installer seems to finish nicely, except the terminal throws several errors along these lines (see photo):
[Code]....
I tried also with 10.04 LTS, the difference being that the install warning appears two or three times instead of once. Some results from googling (Ubuntu Forums, Ubiquity bug) suggest unchecking the initial update options. I am going to try this but I'm not sure if I'll be able to get the boot loader right (there seemed to be problems with this).
View 7 Replies
View Related
Feb 26, 2010
I am having some issues compiling kernel modules against the pre-built OpenSUSE kernel. Whenever I compile a module and try to load it, I get something like:
Code:
insmod fs/smbfs/smbfs.ko
insmod: error inserting 'fs/smbfs/smbfs.ko': -1 Invalid module format
It doesn't actually matter what the module is, they all do the same thing. I have tried the above mentioned smbfs, I've also tried:vmware kernel module
[Code]...
View 9 Replies
View Related
Mar 20, 2011
This has got me stumped. I expected to do /etc/init.d/vboxdrv setup after the upgrade from 11.3 to 11.4 but the command fails. The log is (it seems to repeat so I only quote the final bits to make it fit into the wordcount limit):
Code:
make KBUILD_VERBOSE=1 -C /lib/modules/2.6.37.1-1.2-desktop/build SUBDIRS=/tmp/vbox.0 SRCROOT=/tmp/vbox.0 modules
[code]....
View 2 Replies
View Related
Feb 27, 2011
I want to remotely install OpenSUSE on one of my servers. I followed the instructions given at SDB:Remote installation - openSUSE, but it didn't work. (My server reverted back to the already installed system.) I think this has to do with a special kernel module (megaraid_sas) that is necessary for the raid controller. Without this module, the kernel cannot find any disk. Of course, the module is not included in the initrd provided by OpenSUSE. I know how to add files to the initrd, but I have no idea where I have to put the required kernel module and which config file inside the initrd must be modified to make the kernel load the module.
View 1 Replies
View Related
Mar 9, 2010
I installed the nvidia proprietary drivers with click-install and everything perfect, I have desktop effects working but the problem is that when you open the config. screen settings to make sure everything was really good, I get to screen unknown April.
The maximum resolution is the correct 1440 * 900 for 19 "but the refresh rate by not recognizing the monitor down to 50hz me and gives me the option to 60hz as it was before installing the nvidia drivers.
How can I fix the display settings?
View 6 Replies
View Related
Nov 24, 2010
I recently reformatted and dual partitioned to both Windows 7 as well as ubuntu 10.10. Loading works fine and Windows 7 is 100% operational. I cannot seem to get my wireless network adapter to be read by Ubuntus 'Windows Wireless Drivers' gui. Here are the steps that I have done THUS far, to make sure that we are all on the right path. Before I go any further, my wireless network adapter is an old school WUSB11 Linksys Wireless Network Adapter (running version 2.6).
1) Downloaded and installed "ndiswrapper" from ubuntu's main website. I downloaded the common, utils and ndisgtk files and installed them accordingly.
2) I extracted these three files to the desktop of Ubuntu and accessed the terminal page.
3) From terminal I typed "cd Desktop" to change the directory to the desktop.
4) Next, I typed in "Sudo dpkg -i ndiswrapper-common_1.54-2ubuntu1_all.deb
Sudo dpkg -i ndiswrapper-utils-1.9_1.54-2ubuntu1_i386.deb
Sudo dpkg -i ndisgtk_0.8.5-1_i386.deb"
5) This installed Windows Wireless Drivers gui successfully and I can access it.
6) I have downloaded the driver files for the adapter from the cisco website and searched them for the required files needed.
7) After extracting the .INF file from the "Drivers" directory named "NETUSB.SYS" (I wasn't sure if the other associated files within the same folder needed to be present together with NETUSB so I moved everything to the desktop) I typed in "sudo ndiswrapper -i NETUSB.inf". After accessing the Windows Wireless Drivers gui I have noticed that the 'netusb' driver is present yet under it, the system states "Hardware present: No". This leads me to believe that maybe I installed incorrectly or my "fireware?" is not present? I was reading through the installation guide posted on the ubuntu website that in addition to the .INF file we also need the BIN file(s)? and SYS file(s)?.. The folder with the drivers for my adapter contains a BIN file but it is not within the "Drivers" section of the folder.
9) Upon mousing over the network Icon naturally my hardware is still not present.
10) From what I gather after the system finds the hardware I am to write into the terminal
[Code]....
View 2 Replies
View Related
Jan 12, 2011
I have recently installed Linux Mint 10 on my laptop. When I look at the Device Manager in Windows 7, it says I have an Atheros AR9285 Wireless Network Adapter. Right now, I am unable to connect to wifi with Linux. What drivers am I able to install, and how would I install them?
View 3 Replies
View Related
Feb 3, 2010
I have a Belkin Enhanced Wireless USB Network Adapter Model # F6D4050 v2. The drivers are for windows but the windows wireless drivers app doesnt work. I see a tutorial for a linksys that appears to have the same chipset, but I am not sure if any of the steps need to be modified, also my kernel is a bit different. Here is my kernel:
[code]...
View 1 Replies
View Related
Apr 28, 2010
I haven't been able to get a working X11 environment on a Dell PowerEdge 1850. Using YaST without an X11 environment sucks particularly when you are trying to configure Apache. In addition, the Apache configuration files seem to have changed significantly since the last time I configured Apache on a SuSE Linux distribution. Where can I find good documentation on editing suseconfig files to ensure that I get the modules installed that I need for the collaboration tool that I'm installing?
View 2 Replies
View Related
Aug 8, 2010
I have installed Virtualbox PUEL in 64-bit 11.3. This is a fresh install. My computer has an onboard nvidia 8300GS graphics card. I do not think this is related to the issue. I added the virtualbox repository and installed the program via yast. when I type "VirtualBox" in the terminal I get the following output:
[code]...
View 4 Replies
View Related
Mar 16, 2010
It's been a while since ive run any Linux OS, but after reading about Osuse, i decided to partition my drive and check it out. Just downloaded and installed OpenSUSE. I have access to internet via my hard wired lan port, but wireless has me confused. Dell D600.I have allowed all updates to install, and added my wireless connection using KDE Control module. When i hit the scan button the scan box appears but nothing is picked up. My router is linksys, and its wide open (no encryption, nor hidden).
lspci
02:03.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 02)
[code].....
View 9 Replies
View Related
Jun 26, 2011
I have a laptop Compaq cq60 and once I installed opensuse 11.1 64 with a Atheros AR5001 wifi card (pci). It worked and connected to several wap at home and abroad with no problem. I upgrade the laptop with a clean install to OpenSuSE 11.4 (also x86_64).Now when I try to bring the interface up a strange message appears. Moreover! I had the same problem with a Netgear usb wifi dongle!A Realtek completely different chipset. Before the problems a small explanation of the setup.
The module for the Atheros is loaded with no problems.I already tested rmmod ath5k and rmmod ath and then modprobe ath5k ... no problems whatsoever.The same happens for the NetGear usb wifi dongle! It is immediately recognized as soon as the module is inserted and the module loaded.I also checked this with lsudev and lshal ... I could not see any problems there ... I do not use NetworkManager as my experience tells me it is better to first configure on cli and then move to the graphical interface when things are working conveniently.
So both internal and usb wifi cards are detected and the respective modules loaded with no problems.They are both configured in yast to be activated manually and they both have the wep key and essid. I connect to a Asuswl500g WAP with wep encryption just to start.
When I try to bring up any of those wifi interfaces I get this error :
ifup wlan0
wlan0 device: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
wlan0 starting wpa_supplicant
[code]....
View 4 Replies
View Related
Sep 13, 2011
so what will i do ??
Code:
ifconfig wlan0 up
SIOCSIFFLAGS: Unknown error 132
[code]....
View 4 Replies
View Related
