Hardware :: ERROR: Unable To Determine The Version Of The Kernel Sources Located In '/lib/modules/2.6.35
Jan 11, 2011
I have installed Arch Linux quite a few weeks ago; but I'm still trying my best to install the nividia display driver for my graphics card (nVidia Geforce 2 MX 400). Not only in Arch but have tried installing on other distros and still failed. I have read up all the documentations and I still find it hard to do this task. When I used the terminal and executed the NVIDIA-Linux-x86-94.43.01-pkg1.run file without any window manager running, I get this problem:
ERROR: Unable to determine the version of the kernel sources located in '/lib/modules/2.6.35-ARCH/build'. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at nvidia.com.
Now I'm using Arch Linux Kernel 2.6.35 and I have got the source. But where am I suppose to put it now? I do not want to change the kernel. I just want the nVidia installer to identify that there is a kernel source so that it can install. I have searched up a lot on websites and ended up with no proper guide.
This is a very old driver. So since now I have the nVidia driver installation package and also the kernel source,
I have installed Arch Linux quite a few weeks ago; but I'm still trying my best to install the nividia display driver for my graphics card (nVidia Geforce 2 MX 400). Not only in Arch but have tried installing on other distros and still failed. I have read up all the documentations and I still find it hard to do this task. When I used the terminal and executed the NVIDIA-Linux-x86-94.43.01-pkg1.run file without any window manager running, I get this problem:
Quote: ERROR: Unable to determine the version of the kernel sources located in '/lib/modules/2.6.35-ARCH/build'. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at [URL].
Now I'm using Arch Linux Kernel 2.6.35 and I have got the source. But where am I suppose to put it now? I do not want to change the kernel. I just want the nVidia installer to identify that there is a kernel source so that it can install. I have searched up a lot on websites and ended up with no proper guide. This is a very old driver. So since now I have the nVidia driver installation package and also the kernel source
The rest of the message is " located in /lib/modules/2.6.24-16-server/build". The version is Ubuntu server 8.04. Why can't it, and how can I help it along?
I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
It has been years since I have need to compile the kernel or its modules. Here goes: I recently upgraded to ubuntu 10.10 and needed the kernel source and its modules source. The relevant directories are in a mess. Several diff versions, broken links, the works. Is there a nice easy way, to remove all of the sources, there, and err "install" the ones for my latest kernel, in the correct places. Then I might have a chance at getting the two modules I need complied! Nvidia being one for the geforce 4 mx420 nv17
I was wondering how can I determine among the modules loaded at boot which of them are really necessary and which are not, in order to reduce the boot process time and have a more "elegant" system start.
I know this theme is a little bit of complicated because it depends of the user's point of view and demand a high knowledge of which things are happening in your system but I need somewhere to start improving the performance of my debian system.
I can not for the work get Virtual Box's Additions to install in my FC12 guest. The error log (/var/log/vboxadd-install.log) shows: Makefile:23: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again.. Stop.
I have tried: # KERN_DIR=/usr/src/kernels # KERN_DIR=/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686 # KERN_DIR=/usr/src/kernels/2.6.31.12-174.2.22.fc12.i686/kernel
I am trying to setup Slacware 13.1 x86_64 to a encrypted partition. I used the README_CRYPT.TXT howto : [URL] At the step when I create an initrd.gz I get this error: Quote: ERROR: No /lib/modules/2.6.33.4-smp kernel modules tree found for kernel "2.6.33.4-smp"
I tried to look into the directory and there was only modules under 2.6.44.3. So I tried to change the command into: Quote: mkinitrd -c -k 2.6.33.4 -m ext3 -f ext3 -r cryptroot -C /dev/sda2
This command was successful, but I don't know if this is alright. I made the changes in lilo.conf, add initrd = initrd.gz. This is all on unencrypted /boot partition. The boot=/dev/sda1 I also set for the unencrypted boot partition. When I boot the system I get a kernel panic:
I am trying to install ndiswrapper, and have gotten as far as extracting the .gz file. However, when I type in the "make" command, it returns the error message:
Cannot find kernel version in /usr/src/linux-2.6.21.5, is it configured? Stop.
I do not have anything in the folder /usr/src, so I don't know where it might be. I'd like to install this, so it will make my switch to Linux easier.
is there a common reason why modules get mismatched with the running kernel version?why do I always get that uneasy feeling like I'm headed in the wrong direction?
I have installed and configured Slackware 13.1 and it works perfectly. Now I'm going (actually forced) to downgrade kernel version down to 2.6.32. Is there any caveats? Do I need rebuild any other packages from sources?
How can I use DKMS to force the virtualbox setup to run using the correct kernel sources? This is the error I'm getting in the vbox logs
Code: Attempting to install using DKMS removing old DKMS module vboxdrv version 3.1.2 Deleting module version: 3.1.2 completely from the DKMS tree. Done.
Error! Your kernel source for kernel 2.6.31.6-166.fc12.x86_64 cannot be found at /lib/modules/2.6.31.6-166.fc12.x86_64/build or /lib/modules/2.6.31.6-166.fc12.x86_64/source. You can use the --kernelsourcedir option to tell DKMS where it's located.
Failed to install using DKMS, attempting to install without: Makefile:152: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again. Stop.
I just installed a fresh CentOS 5.2 32bit system. I used "The Perfect Server" server document from Howtoforge and went through those steps and then added Webmin administration console. I then tried to install VMware Workstation 6.5 onto the system. I downloaded the latest VMware bundle, ran it and everything went fine. I then try to run vmware and I get the following messages
C header files matching your running kernel were not found
Before youcan run VMware Workstation, several modules must be compiled and loaded into the running kernel
Kernel Headers 2.6.18-92.1.22.el5.centos.plusPAE
Kernel headers for version 2.6.18-92.1.22.el5.centos.plusPAE were not found. If you installed them in non-default path you can..
I have, for days, been trying to get a Fedora 15 server to send audio output to the system monitor, an ASUS VH242H, via HDMI. The video portion works perfectly, allowing me to appreciate GNOME 3 for the first time. Sound, on the other hand, is non-existent.
From many, many threads on this problem, I have at least been able to provide some info which might help resolve this. Unfortunately, I have now read too much and followed too many suggestions to be able to find my way through the morass. So, once again, I built a completely new system to ensure a clean start.
Note also that to simplify things, I disabled the on-board audio in BIOS so only Nvidia has any sound output capability. Initially, 'alsamixer -V all' identifies the card and the chip as being PulseAudio. That would change if I used the <F6> option but I have not done so to keep things 'clean' at this point. The 'Master' is full on (100<>100), so muting is not a problem. Next, I searched for the device from the output of /proc/asound/card0 which would match the monitor.
The one device associated with the monitor_name is eld#3.0:
monitor_present 1 eld_valid 1 monitor_name ASUS VH242H
[code]...
Both the kernel driver and the kernel modules are not what I think I should have. The kernel driver should be HDA NVidia for starters, no? Running modprobe -l and looking for nvidia returns:
'kernel/drivers /video/nvidia/nvidiafb.ko'and 'extra/nvidia/nvidia.ko' But I have not attempted anything beyond this point because I am just too confused as to what needs to be done and who or what manages these values effectively.
I have created a custom debian netinst USB stick. It has the default UK repositories in the sources list, but people in the US also need to use the stick from time-to-time.
Would it be a bad idea to mix US and UK repositories in the sources.list? Would Debian be clever enough to pick up the best repo depending on where the user is using the OS from? Or would I need to be a bit clever and create some sort of script to deal with this. (I am avoiding non-free/experimental software).
I opted to install my Linux Fedora distribution, in a SUN VM (Virtualbox). [URL] I have 2 questions:
My current max res available to select is 1024x768. Can I run at 1920x1200? My display indicated that it is 'Unknown'. I don't know if that is in on the deal, or not...
Second question: When installing VBOXADDITIONS_3.1.2_56127, I am getting the error: Building the VirtualBox Guest Additions kernel modules [FAILED]
If I am displaying the log correctly, it indicates: Makefile:23: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again.. Stop Pictures are located here, in the EVGA Linux forum: [URL] I am new to both Linux, and Fedora.
My mission statement: To run Linux using the Fedora distribution, in a VM window under Windows 7 64bit Ultimate, with the ability for scripting using Bash, with the Perl programming language installed, and use Apache Tomcat to monitor both apps, and various VM installs, on numerous Servers via the internet.
I'm trying to update the drivers to NVIDIA-Linux-x86-260.19.21.run (GeForce GT 220) but ran into several problems. I'm currently running Ubuntu 10.04. when running sudo sh NVIDIA-Linux-x86-260.19.21.run /var/log/nvidia-installer.log gives the following errors:
-> Uninstallation of existing driver: NVIDIA Accelerated Graphics Driver for Linux-x86 (260.19.21) is complete. -> Searching for conflicting X files: ERROR: Unable to open '/usr/lib/xorg/modules/libglx.so' for reading (No such file or directory)
I have a mount command that I want executed every single time the computer reboots so that the folder is always mounted when I need it. What file would I have to edit in order to accomplish this?
I'm trying to install Sun VirtualBox Additions into Fedora 12 which is installed in VirtualBox running on top of Windows 7. As the Fedora install was originally a live distro which was then installed to the HD, it may be missing some essential files for compiling.
My attempt to install the VBoxLinux additions is incomplete and I can't get the full range of video displays. The largest is This is the error message: "Your system does not seem to be set up to build kernel modules".
Should I update Fedora to install all the updates available? I did find one webpage which gave an accurate list of files to install for this purpose but can't find it now.
my error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
[code]...
I get this when trying to launch a VB after making one with wizzard.
I recently started having this odd behaviour while using and loading cpufrequtils on boot, I don't know if it is happening to someone else.During boot I'm getting( when /etc/init.d/cpufrequtils invokes /etc/init.d/loadcpufreq to load the proper module):
Loading cpufreq kernel modules...FATAL: Error inserting speedstep_centrino (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/speedstep-centrino.ko): No such device FATAL: Error inserting pcc_cpufreq (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/pcc-cpufreq.ko): No such device
I'm trying to install the 32bit 10.04 server to an atom machine from a CD burned with ubuntu-10.04-server-i386.iso. The installer is presenting me with the:"No kernel modules were found" ..error message. Is the atom cpu and chipsets supported by the 32bit server installer?
I am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".
Tonight I installed ubuntu 10.10 (32 bit) on an external usb harddrive with a dvd I burned and I used my older desktop. I disconnected all internal and external drives first so everything had to be put on the usb drive I selected (only option available). I used the option to load extra software, use the entire hard drive, and let the software do it's thing. I basically had no options where to put things and it didn't have much choice.
When I boot the usb drive on my laptop (win 7 64 bit) by telling the bios to boot to it first... I get an error: modprobe: FATAL Could not load /lib/modules 2.6.35-22 generic modules No such file or directory. This message appears twice and then it does boot into ubuntu and seems to work fine. I'm new to this OS so that is an uneducated guess but the things I have done seem to be working. So exactly what is this error referring too? Is there a way to fix the problem or do I just ignore it.
