I'm trying to install the 32bit 10.04 server to an atom machine from a CD burned with ubuntu-10.04-server-i386.iso. The installer is presenting me with the:"No kernel modules were found" ..error message. Is the atom cpu and chipsets supported by the 32bit server installer?
View 1 RepliesI am trying to setup Slacware 13.1 x86_64 to a encrypted partition. I used the README_CRYPT.TXT howto : [URL] At the step when I create an initrd.gz I get this error: Quote: ERROR: No /lib/modules/2.6.33.4-smp kernel modules tree found for kernel "2.6.33.4-smp"
I tried to look into the directory and there was only modules under 2.6.44.3. So I tried to change the command into: Quote: mkinitrd -c -k 2.6.33.4 -m ext3 -f ext3 -r cryptroot -C /dev/sda2
This command was successful, but I don't know if this is alright. I made the changes in lilo.conf, add initrd = initrd.gz. This is all on unencrypted /boot partition. The boot=/dev/sda1 I also set for the unencrypted boot partition. When I boot the system I get a kernel panic:
[Code]....
I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
I reinstalled 10.04.(finally) on a single partition mounted as "/". everything went fine until I rebooted, GRUB began loading and then came back with "no modules name found". I found other postings with the same problem,[URL] but this method doesn't work with the Dmraid.
View 6 Replies View Relatedhow can I check if my machine have the kernel-modules to mount NTFS? Running FC12
View 2 Replies View RelatedI installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.
I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.
I want to remotely install OpenSUSE on one of my servers. I followed the instructions given at SDB:Remote installation - openSUSE, but it didn't work. (My server reverted back to the already installed system.) I think this has to do with a special kernel module (megaraid_sas) that is necessary for the raid controller. Without this module, the kernel cannot find any disk. Of course, the module is not included in the initrd provided by OpenSUSE. I know how to add files to the initrd, but I have no idea where I have to put the required kernel module and which config file inside the initrd must be modified to make the kernel load the module.
View 1 Replies View Relatedits openSUSE 11.2 I am already running sles10sp3, windows2k3, and winxp virtual machines, but when I try to install SLES11i586 I got following error message Error No kernel was found, The installation may have failed
[Code]...
my error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
[code]...
I get this when trying to launch a VB after making one with wizzard.
I am trying to install the Nvidia Quadro NVS 110 169.04 drivers but am having issues during install. Prior to attempting my install I did install the kernel-devel rpm so it can compile. after running the RPM I get. Quote: No precompiled kernel interface was found to match your kernel; would you like the installer to attempt to download a kernel interface for your kernel from the NVIDIA ftp site [URL]?
which of course does not work. next it says Quote: "No precompiled kernel interface was found to match your kernel; this means that the installer will need to compile a new kernel interface.. i hit okay and move on to. Quote: Error: Unable to find the kernel sources tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat linux systems, for example be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. if you know the correct kernel source files are installed, you may specify the kernel source path with the "--kernel-source-path' command line option
I'm trying to install Sun VirtualBox Additions into Fedora 12 which is installed in VirtualBox running on top of Windows 7. As the Fedora install was originally a live distro which was then installed to the HD, it may be missing some essential files for compiling.
My attempt to install the VBoxLinux additions is incomplete and I can't get the full range of video displays. The largest is This is the error message: "Your system does not seem to be set up to build kernel modules".
Should I update Fedora to install all the updates available? I did find one webpage which gave an accurate list of files to install for this purpose but can't find it now.
Tonight I installed ubuntu 10.10 (32 bit) on an external usb harddrive with a dvd I burned and I used my older desktop. I disconnected all internal and external drives first so everything had to be put on the usb drive I selected (only option available). I used the option to load extra software, use the entire hard drive, and let the software do it's thing. I basically had no options where to put things and it didn't have much choice.
When I boot the usb drive on my laptop (win 7 64 bit) by telling the bios to boot to it first... I get an error: modprobe: FATAL Could not load /lib/modules 2.6.35-22 generic modules No such file or directory. This message appears twice and then it does boot into ubuntu and seems to work fine. I'm new to this OS so that is an uneducated guess but the things I have done seem to be working. So exactly what is this error referring too? Is there a way to fix the problem or do I just ignore it.
I'm currently running 32 bit Ubuntu 10.10 on my laptop. Apparently, my computer can support 64bit OS. My / and /home partitions are separated and exist on different physical hard drives. Is it possible to just install 64bit ubuntu over my 32bit existing installation? Could I preserve the customizations I've made? what about application settings like chrome, firefox, compiz, etc.? Would I have to meticulously reinstall all of the little things I've done to my ubuntu installation?
View 3 Replies View Relateddefault in openSUSE 11.2 we have installed kernel-desktop. This kernel is optimized for the desktop.
What is the name of kernel optimized for server machine? In my case Firebird database + Apache + PHP?
I am trying to use my Wiimote with ubuntu. I have followed the guide on here:[URL].. But I get this error when I run modprobe:
FATAL: Error inserting uinput (/lib/modules/2.6.32-22-generic/kernel/drivers/input/misc/uinput.ko): Operation not permitted
Or do I need to d/l a new ISO that's 32bit?
View 1 Replies View RelatedI installed OpenSuSE 11.2 64bit from a Linux Magazine #111 dvd and now cannot create DomU guests. The exact error is in the subject line. It is sitting on a software RAID-1 partionion on two (mirrored) hard disks. When I first install - formatting all partitions - it reports error 17 and won't load the OS. After running the Repair installed system from the DVD I get the impression it is doing things twice rather than doing the repairs once on the RAIDed partition. Should I go back to 11.1?
View 4 Replies View RelatedI have installed Arch Linux quite a few weeks ago; but I'm still trying my best to install the nividia display driver for my graphics card (nVidia Geforce 2 MX 400). Not only in Arch but have tried installing on other distros and still failed. I have read up all the documentations and I still find it hard to do this task. When I used the terminal and executed the NVIDIA-Linux-x86-94.43.01-pkg1.run file without any window manager running, I get this problem:
ERROR: Unable to determine the version of the kernel sources located in '/lib/modules/2.6.35-ARCH/build'. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at nvidia.com.
Now I'm using Arch Linux Kernel 2.6.35 and I have got the source. But where am I suppose to put it now? I do not want to change the kernel. I just want the nVidia installer to identify that there is a kernel source so that it can install. I have searched up a lot on websites and ended up with no proper guide.
This is a very old driver. So since now I have the nVidia driver installation package and also the kernel source,
I am looking for a vps that I can run my own kernel and install modules in.
View 2 Replies View RelatedI'm trying to install some wireless drivers, but apparently I don't have a /lib/modules/<kernel>/build directory, which is causing the Makefile to throw an error. Is there a specific place I should point the Makefile at?
View 9 Replies View RelatedI'm just installed OpenSuse 11.3 (64) on a 30gb SSD, hoping to get virtualbox 4.0 running to virtualize an instance of Windows 7.I went through some pain with my Nvidia video card and actually getting vb to install, but through lots of searching and tinkering got here.I created a vm in the vb control panel, but when I go to start it I get:
Code:
Failed to open a session for the virtual machine Win7Main.
The virtual machine 'Win7Main' has terminated unexpectedly during startup with exit code 1.
[code]....
on my new nettop acer veriton n281g ( atom d425) i need a VM with XP . What is the best choise virtualbox or kvm or other ...
View 1 Replies View RelatedI am having some issues compiling kernel modules against the pre-built OpenSUSE kernel. Whenever I compile a module and try to load it, I get something like:
Code:
insmod fs/smbfs/smbfs.ko
insmod: error inserting 'fs/smbfs/smbfs.ko': -1 Invalid module format
It doesn't actually matter what the module is, they all do the same thing. I have tried the above mentioned smbfs, I've also tried:vmware kernel module
[Code]...
what is happening on my Centos virtual server (ps I'm having a great time re-learning Linux after a large gap and usually try and find out myself but this has me confused) First thing I did was install Tomcat and try and change the port to 80 using iptables -nat and it complained a kernel module was missing. Instead setup Apache to redirect requests so that's now working I then tried to install CSF firewall and the validation perl script returned fatal errors so I assumed OK my virtual server Kernel is restricted and used denyhosts instead which is working great
Here's the confusion.. I later retried the csftest script and it now works including all the iptables and nat stuff that fataled before. I've not rebooted or changed anything except run denyhosts and the postgres daemon + ended a few daemons that I didn't need (eg pickup,tlsmgr,courier,postfix,qmgr,saslauthd) Running lsmod returns nothing and /proc/modules is zero bytes so I'm not able to tell what is loaded? I'm tempted to try and get Tomcat redirecting via iptables and see what happens but if it works I don't like that something seems to have changed.. before I ran it direct as root now I'm SU into root from another login
I opted to install my Linux Fedora distribution, in a SUN VM (Virtualbox). [URL] I have 2 questions:
My current max res available to select is 1024x768. Can I run at 1920x1200? My display indicated that it is 'Unknown'. I don't know if that is in on the deal, or not...
Second question: When installing VBOXADDITIONS_3.1.2_56127, I am getting the error: Building the VirtualBox Guest Additions kernel modules [FAILED]
If I am displaying the log correctly, it indicates: Makefile:23: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again.. Stop Pictures are located here, in the EVGA Linux forum: [URL] I am new to both Linux, and Fedora.
My mission statement: To run Linux using the Fedora distribution, in a VM window under Windows 7 64bit Ultimate, with the ability for scripting using Bash, with the Perl programming language installed, and use Apache Tomcat to monitor both apps, and various VM installs, on numerous Servers via the internet.
The new kernel upgrade on Fedora 14 will not boot. lib/modules do not exist is the message. Grub was adjusted to match the old kernel, and the new kernel when booting says lib/modules do not exist. The old kernel has twice as many modules as the new kernel in lib/modules. How do I get the new modules to install so I can boot with the new kernel then? Should I reinstall the new kernel?
View 2 Replies View Relatedubuntu could delay kernel module installation until device is inserted?Take my usb ath9271 wifi adapter as an example: when kernel boot up, no ath modules are installed until usb wifi apdapter is inserted, ath related modules are insmod.Could anybody how to achieve this? udev or something else?
View 5 Replies View RelatedI have installed CentOS on a VMwareWorktation and that CentOS, i also install VMware Server (suscess) and setup a guest OS that, but i start this Guest OS, an error show "You may not power virtual machine in virtual machine"...
View 3 Replies View RelatedI have just upgraded from 11.1 to 11.4. When I boot up, I get a command line, but when I do 'startx', I get 'Fatal server error: no screens found'. I have been looking for a solution and tried 'Xorg -configure' but this gives:
Code:
Failed to load /usr/lib/xorg/modules/drivers/vboxvideo_drv.so: undefined symbol: resVgaShared
[code]....
I have this kind of error:
Code: Select allr@prime:~$ systemctl status systemd-modules-load.service
● systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Чтв 2015-08-20 08:07:38 EEST; 13min ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 150 ExecStart=/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
[Code] .....