Why am I getting this error: ERROR: Module mod-wsgi does not exist!
$ sudo a2enmod mod-wsgi
Code:
ERROR: Module mod-wsgi does not exist!
$ sudo a2enmod mod_wsgi
Code:
ERROR: Module mod_wsgi does not exist!
[Code]...
I have Apache/2.2.14 (Ubuntu) DAV/2 SVN/1.6.6 mod_fcgid/2.3.4 Phusion_Passenger/2.2.14 PHP/5.2.10-2ubuntu6 with Suhosin-Patch configured In UBUNTU 10.04 I like to install apache2 mod_perl I make apt-get install libapache2-mod-perl2 and I get: Quote: libapache2-mod-perl2 is already the newest version.
Ok I try sudo a2enmod mod_perl ERROR: Module perl does not exist! how I make Perl work in apache2 UBuntu 10.04
I am running Ubuntu 10.04 x86 64 bit Desktop.I want to accomplish setting up a virtual host environment for education reasons. How may I accomplish this? So far I am going by this following guide: URL... But when I get to the part of entering the command in the terminal "a2enmod fcgid" I get the following error: "ERROR: Module fcgid does not exist" I've been pulling my hair and spent a ton of time trying out how to set up suexec and virtual hosting .
View 1 Replies View RelatedI've installed openSuse 11.4 server-mode (text only) on my desktop, and I'm trying to configure IceWM so i'll eventually have it set up so it always boots into text only mode, but I could be able to quickly start icewm via the command line.using Yast, I installed the Xorg server, and icewm.when I type X, the screen goes black and it just doesn't seem to do anythingI found if I hit ctrl+alt+f1 it kinda puts me back into text only mode, but I can't put in commands anymore. The last thing it says on the screen is:
Failed to load module "fglrx" (module does not exist, 0)
I've goggled that error message and the discussions that popped up around it made no sense to me at all. I've never configured X from scratch before, can someone point me towards a tutorial or something?
I cannot find the Xorg configuration file on my newly installed Debian on my tablet-pc, so I followed this tutorial [URL] and ran the command "Xorg -configure", to which I got the following error messages:
(EE) Failed to load module "vmwgfx" (module does not exist, 0)
(EE) vmware: Please ignore the above warnings about not being able to load module/driver vmwgfx
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
[code]...
Code:
nits@nits-desktop:/mnt/Storage/Tors/Incomp$ btdownloadcurses --check_hashes 1 filename.torrent
/usr/lib/python2.6/dist-packages/BitTorrent/Storage.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead from sha import sha
These errors occurred during execution:
[09:37:48] IOError - [Errno 5] Input/output error
Got this error when I tried hash checking, was downloading the file using rtorrent when there was a sudden powercut and my system shutdown abruptly, tried restarting the torrent and kept encountering problems while restarting.
When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
I've been unable to boot into x using the real-time kernel from CCRMA at home. I get the error "Failed to load module "nvidia" (module-specific error,0) no drivers available. I'm using the driver from Nvidia. I know that this is not an official Fedora kernel and I should be bothering CCRMA about this, but in the mean time could I edit the entry in grub.conf so that it will use the Nouveau driver for that kernel only? That way I could "dual-boot", and just use the rt kernel when I want to use audio software and don't need 3d graphics.
View 5 Replies View RelatedOK Trying a fresh install of bnome openSuse, and I have certainly screwwed something up again and hope I don't have to reinstall again., arghhhh! Tomboy won't open, even after reinstallation, and below is the error, but first, as well I can't open my .odt file with openoffice writer!
now the error... #tomboy Gtk-Message: Failed to load module "canberra-gtk-module": libcanberra-gtk-module.so: cannot open shared object file: No such file or directory Gtk-Message: Failed to load module "gnomebreakpad": libgnomebreakpad.so: cannot open shared object file: No such file or directory ...and lots more
I accidentally removed the partition in my hard drive where my Ubuntu was installed.After restarting my Laptop, I suddenly receive the message saying,
"grub error> partition does not exist.
grub>"
I have a backup of /oracle in redhat linux advance server 2.1,i have taken that backup by tar -cvzf command when untar this backup by tar -xvzf command the following error occurred-"Error exist delayed from previous error"
View 2 Replies View RelatedI've downloaded Ubuntu 8.10 and I have installed it within ms windows. My first problem was when I went to boot Ubuntu and the graphics weren't right so I rebooted it with a different graphic configuration and it installed successfully. When I went to boot Ubuntu a second time to actually use it I got the following error:
ALERT! /host/ubuntu/disks/root.disk does not exist. Dropping to a shell!
BusyBox v1.10.2 (Ubuntu 1:1.10.2-1ubuntu6) built-in shell (ash)
After 2 months away from Fedora i am using it again, and used yum update to update stuff, everything was running fine, downloaded stuff, but 2 of the 666 stuff to install got error, here is:
[code]...
What is the error "invalid module format" and the message "insert kernel module" mean? And whats the reason for the same?
View 8 Replies View RelatedOS:Debian Jessie -- Linux 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u4 (2015-09-19) x86_64 GNU/Linux
Apache version 2.4.10
IF i test the link http://localhost/123456789 , I can't find the message in /var/log/apache2/error.log
like : [Tue Sep 22 23:30:34 2015] [error] [client 192.168.10.177] File does not exist: /var/www/html/123456789
I got the "The file '/var/log/syslog' does not exist." message when I tried to run KSystemLog as well as "The file '/var/log/auth.log' does not exist." when I tried to view the authentication log. There is no icon beside the items "Krfb," "KSystemLog," and"Nepomuk Backup" in the "System Tools" menu of Gnome.
View 9 Replies View Relatedwhen I reviewed the error_log I found that it is logging thousands of errors which are similar. I've included a sample of the errors. The following error seems to happen constantly, from many different ip's...
Code:
[Thu Apr 22 01:02:06 2010] [error] [client (the ip address removed)]
File does not exist: /home/virtual/site4/fst/var/www/html/colombia-news,
I am in the process of migrating my old server into new Linux new server. As part of the , apache configuraton is one of the process . i have installed http with yum. i added some test dir like /date/test underwhich i created one test.html. When i start apache , it says Starting httpd: Warning: DocumentRoot [/data/test] does not exist.i am not sure about it. I have directory exists. however it shows the error message.
View 3 Replies View RelatedWe've had this server running before but two hours ago there are some domains outside which we cannot send email to. this is a sample of the message we get
Quote:
The original message was received at Fri, 22 Jan 2010 14:31:59 +0800 from [10.0.200.10]
----- The following addresses had permanent fatal errors -----
<beth@nippon-antennaphil.com> (reason: 550 localhost.localdomain does not exist)
----- Transcript of session follows -----
... while talking to nippon-antennaphil.com.:
>>> DATA
<<< 550 localhost.localdomain does not exist
550 5.1.1 <beth@nippon-antennaphil.com>... User unknown
451 4.4.1 reply: read error from nippon-antennaphil.com.
Our server's been running smoothly before but i dunno what happened. I can send mails to gmail and yahoo as well... but there are like 3 domains which we cannot send mails to.
I did a fresh install of F15, and I can not get it to boot
Quote:
Booting Fedora (2.6.38.6-27.fc15.x86_64)
root (hda,4)
Error 21: Selected disk does not exist
Press any key ton continue ...
The contents of my fstab
Quote:
UUID=9fc649bd-ea40-44ab-88f6-29afe4f26576 / ext3 defaults 1 1
UUID=2437a8af-311a-4caf-99b3-1f137df69d43 /home ext3 defaults 1 2
UUID=a6f67606-ecb6-47c4-8913-f101fc6a097e swap swap defaults 0 0
[code]....
From what I can figure out, grub can not figure out which disk has my root file system. I checked the partition labels and they match the UUID that are in my fstab.
Plan to use GRUB for multiple booting to select the OS but only with luck have I got it partially to work. Windows 98 and Puppy 431 O.K on first HDD but Puppy 421 on second HDD /dev/sdb1 stops at error 21.
View 6 Replies View RelatedWhen i try to share a folder from linux ubuntu desktop i am facing a problem a error reported are as follow:
loaded services file OK.
ERROR: lock directory /var/run/samba does not exist
ERROR: pid directory /var/run/samba does not exist
or i have no permission to open samba
I got a problem with my Slackware installation after upgrading to slackware-current. I made a clean 13.1 install on my laptop, then I logged in as root, connected to the net and upgraded to slackware-current. Then, after rebooting, I try to log in to kde as root but I get this error:
Code:
kdestartupconfig4 does not exist or fails. The error code is 127. Check your installation. After getting these errors, I made a completely new fresh installation but I got the same errors again.
I even added another user with the adduser command just in case that was the problem but that didn't help. I can't log in to KDE.
I just made a fresh installation of Ubuntu Karmic, but I can't set up my screen resolution correctly. My monitor resolution (1680 x 1050) is not listed in 'Display Preferences' or in my card's proprietary software (ATI Catalyst). The maximum resolution I can select is 1440 x 900.xrandr detects a maximum resolution of 1440 x 1440 and displays the same list of screen resolutions as 'Display Preferences'.
But when I enter the line:
xrandr --newmode "1680x1050_60.00" 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync
I always get this message:
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 156 (RANDR)
Minor opcode of failed request: 16 (RRCreateMode)
[code]....
When we try to login using KDE we get the following error
"kstartupconfig4 does not exist or fails. The error code is 3. Check"
If we use IceWM GUI login works fine.
OS 11.2. When I try to log in my account I get the message {kstartupconfig4 does not exist or fails. The error code is 1. check}. I can only log in as root. As root, I check the file system and my files are there in /home/Myname. I can run all my programmes. The executable kstartupconfig4 is there.
View 9 Replies View Related1)NOT USING MMCONFIG
2)insmod Error inserting `/lib/raid456.ko` -1 File Exist
Dell PowerEdge T110 with 4sata Controllers with Centos2.6.18-238.9.1.el5xen installed .
Code:
/boot on /dev/md0
/ on /dev/md1 Regards
Currently I'm running 3 operating systems on my machine (in order of installation); Windows XP, Windows 7 and Fedora 14. Unfortunately, after I installed Fedora I'm no longer able to boot Windows 7/XP. When I select the "Other" option in the Grub menu, I get the following error:
Code:
Error 21: Selected disk does not exist
To provide more info, here is a boot info script result:
Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Windows is installed in the MBR of /dev/sda
=> Grub 0.97 is installed in the MBR of /dev/sdb and looks on the same drive in partition #3 for /grub/stage2 and /grub/grub.conf.
=> Windows is installed in the MBR of /dev/sdc .....
mdadm: No arrays found in config file or automatically
my laptop doesnt have any cdrom drive and all usbs are broken so wubi is my only option. oh and i use win 7 starter. i tried to install netbook edition to my laptop but i always get error. i can install with only "acpi workarounds". i dont even understand what it is the error and why i'm getting this error.
error is
Quote:
Gave up waiting for root device. Common problems:
-Boot args (cat /proc/cmdline)
-Check rootdelay= (did the system wait long enough?)
-Check root= (did the system wait for the right device?)
-Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/sda2 does not exist. Dropping to a shell!
BusyBox v.1.15.3 (Ubuntu 1:1.15.3-1ubuntu5) built-in shell (ash) Enter 'help' for a list of built-in commands
(initramfs)
Does anyone know how to write this command for mysql version 4? (The command is for mysql version 5, I guess since when I check database in mysql server version4 there is no database name information_schema ) command:select concat(table_schema,'.',table_name) as table_name,table_rows from information_schema.tables where table_rows > 1000000 order by table_rows desc; meaning:show all database,table name and row count from all databases that has table row more than 1000000
Run result with mysql version 5: mysql> select concat(table_schema,'.',table_name) as table_name,table_rows from information_schema.tables where table_rows > 1000000 order by table_rows desc;
[Code]....