General :: (EE) Failed To Load Module "vmwgfx" (module Does Not Exist, 0)
Jun 23, 2011
I cannot find the Xorg configuration file on my newly installed Debian on my tablet-pc, so I followed this tutorial [URL] and ran the command "Xorg -configure", to which I got the following error messages:
(EE) Failed to load module "vmwgfx" (module does not exist, 0)
(EE) vmware: Please ignore the above warnings about not being able to load module/driver vmwgfx
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
[code]...
View 2 Replies
ADVERTISEMENT
May 8, 2011
I've installed openSuse 11.4 server-mode (text only) on my desktop, and I'm trying to configure IceWM so i'll eventually have it set up so it always boots into text only mode, but I could be able to quickly start icewm via the command line.using Yast, I installed the Xorg server, and icewm.when I type X, the screen goes black and it just doesn't seem to do anythingI found if I hit ctrl+alt+f1 it kinda puts me back into text only mode, but I can't put in commands anymore. The last thing it says on the screen is:
Failed to load module "fglrx" (module does not exist, 0)
I've goggled that error message and the discussions that popped up around it made no sense to me at all. I've never configured X from scratch before, can someone point me towards a tutorial or something?
View 5 Replies
View Related
Mar 25, 2011
i installed firefox 4 and removed the old 3.X version. did a general update that my computer showed me was available then i noticed the first problem. firefox 4 would not launch when i clicked it, it would only launch when i clicked the gnome 3 applications button and then clicked and dragged the firefox logo to the desktop, then it opened. the second problem i am now having which at the moment is more bothersome is that after i closed the lid to my laptop and opened it up again after a while and logged back in and noticed that the ENTIRE gnome 3 environment was gone. no panel no menu nothing just the desktop and a few desktop icons. i tried the command "yum install gnome-shell" but it just sed that gnome 2.31.5-7 .fc14.i686 was already installed so it wasnt gonna do anything, then i tried the "gnome-shell --replace" command and it just said
failed to load "canberra-gtk-module": libcanberra-gtk-module no such file or directory.
View 5 Replies
View Related
Aug 17, 2011
When opening gedit as a user I get the following message
Gkt-message: Failed to load module "'pk-gtk-module"
If I try to open gedit as root I get the same message but with other messages. These are shown in the attached file. gtk.txt
This is on an upgraded machine using the preupgrade method. The same has happened on two machines upgraded from F14 to F15 the same way. 64 bit systems.
How to clean this up so the messages do no appear?
View 4 Replies
View Related
Jan 28, 2010
OK Trying a fresh install of bnome openSuse, and I have certainly screwwed something up again and hope I don't have to reinstall again., arghhhh! Tomboy won't open, even after reinstallation, and below is the error, but first, as well I can't open my .odt file with openoffice writer!
now the error... #tomboy Gtk-Message: Failed to load module "canberra-gtk-module": libcanberra-gtk-module.so: cannot open shared object file: No such file or directory Gtk-Message: Failed to load module "gnomebreakpad": libgnomebreakpad.so: cannot open shared object file: No such file or directory ...and lots more
View 3 Replies
View Related
May 1, 2011
I've been unable to boot into x using the real-time kernel from CCRMA at home. I get the error "Failed to load module "nvidia" (module-specific error,0) no drivers available. I'm using the driver from Nvidia. I know that this is not an official Fedora kernel and I should be bothering CCRMA about this, but in the mean time could I edit the entry in grub.conf so that it will use the Nouveau driver for that kernel only? That way I could "dual-boot", and just use the rt kernel when I want to use audio software and don't need 3d graphics.
View 5 Replies
View Related
Jun 1, 2009
When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
View 3 Replies
View Related
Jun 23, 2015
I'vd a problem with loading modules. Booting gives the this error:
Code: Select alllucas@debian8-1:~$ systemctl --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
● systemd-modules-load.service loaded failed failed Load Kernel Modules
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
[Code] ....
Always the same error when booting. After a period of time, (Graphical User Interface) the mouse click no longer operates, also text input isn't possible.
I had no access to the system at all, even crt alt F1 stopped working, also text input was no't possible. so reinstall was the only option. Maybe there is a connection with this two errors.
I've reinstalled Debian 8 several times. Still, both errors stay.
The same happend again (in the GUI) is nothing possible, no txt input, no mouse click), but now I have access to the system, ctr/alt F1 is working.
View 12 Replies
View Related
May 30, 2015
I was playing around with QT5 today and I am getting the error Gtk-Message: Failed to load module "canberra-gtk-module". Searching suggested that the module may not be installed however it looks like it is to me.
Code: Select allii libcanberra-gtk3-0:amd64 0.30-2.1 amd64 GTK+ 3.0 helper for playing widget event sounds with libcanberra
ii libcanberra-gtk3-module:amd64 0.30-2.1 amd64 translates GTK3 widgets signals to event sounds
ii libcanberra-pulse:amd64 0.30-2.1 amd64 PulseAudio backend for libcanberra
ii libcanberra0:amd64 0.30-2.1 amd64 simple abstract interface for playing event sounds
[code]....
View 3 Replies
View Related
May 11, 2010
My nvidia graphics driver was updated last night, and since then I've been unable to get into Gnome without resorting to low graphics mode. I have extensive knowledge of Windoze systems. Upon boot up, I get the following error:
(EE) NVIDIA(0): Failed to load NVIDIA kernel module!
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration
I've tried some troubleshooting, including attempting to uninstall all nvidia drivers and reinstall (via synaptic).
Administration->Hardware Drivers reports that version 173 is installed loaded and active. Nvidia X Server Settings (nvidia-settings) gives me the "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server." error.
I've tried the nvidia-xconfig (both with gdm up and down) and it hasn't made any difference.
Oh, it's a GeForce 6200 wwith two Dell E193FPp monitors running on Ubuntu 10.04.
Here's my xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Fri Mar 12 01:42:27 PST 2010
Section "ServerLayout"
[Code].....
View 9 Replies
View Related
Aug 8, 2010
My laptop broke beyond repair recently so I am stuck on a 6 year old hp pavilion zv5000 given to me by a friend and I thought I may as well give linux a go, I have been meaning to for years. I've installed xubuntu 10.04 as I heard it is less resource intensive than normal ubuntu but have been unable to configure the nvidia graphics card. I used the hardware drivers program which installed the nvidia accelerated graphics driver 96 (which was the recommended version) and then ran sudo nvidia-xconfig as instructed and got
Code:
Warning: Unable to locate/open X configuration file.
New X configuration file written to '/etc/X11/xorg.conf'
Which I presume means it worked correctly, but whenever I try to boot I get a message saying "failed to load nvidia kernel module", at which point I either have to restore the generic configuration or just start the session in low graphics mode. I have googled the problem and in a lot of peoples cases it seems to be linked to upgrading from a previous version whilst mine was a fresh install. I tried sudo modprode and it says the nvidia module isn't present. I tried installing the packages in synaptic which mentioned nvidia kernel modules but still no luck.
View 1 Replies
View Related
Feb 4, 2011
I am trying to fix my friends laptop and after the most recent upgrade she performed she got this error message when her laptop boots. Thing is that it stays frozen in that mode. I don't even see the grub boot loader. I know its the only operating system she has running on her laptop as well. The following error was encountered. You may need to update your configuration to solve this.
(EE) NVIDIA: failed to load the NVIDIA Kernel module.
please check your
(EE) NVIDIA: system's kernal log for additional error messages.
(EE) failed to load module "nvidia" (module-specific error, 0)
(EE) no drivers available
She is running ubuntu 10.10
View 5 Replies
View Related
Nov 26, 2010
So I just recently got my proprietary driver working yesterday (and enjoyed too many hours of Starcraft 2 afterwards) but today after I downloaded an Update Package and rebooted, it's telling me that it "Filed to load NVIDIA kernel module".So now I'm back to square one, I had to restart in the lower graphics mode or whatever it's called prior to logging in.When I go to System - Admin - Hardware Drivers, nothing shows up and it says no proprietary drivers are in use on this system.
When I try to change the resolution under System - Preferences - Monitors (since everything is so big) I get "It appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics driver vendor's tool instead?" I select "Yes" and I get "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server."I'm a total loss here, I'm assuming something from the update package has caused everything to go haywire and I'm hoping that if/when I get this fixed I don't have to keep doing this fix every time I use the Update Manager.I'm still fairly new to this whole Ubuntu thing, so any step-by-step instructions would be appreciated
View 6 Replies
View Related
Jun 7, 2011
I am using Ubuntu 10.04 LTS.With the last update, I have installed the kernel 2.6.32-33.And I have the message "module nvidia failed to load" in Xorg.log.0 My "current" nvidia module is 195. I have tried without success to reinstall nvidia. What I must do ? Wait for a new update of nvidia ?
View 3 Replies
View Related
Feb 4, 2010
I have installed xmms player to listen mp3 music. Now when i am trying to open any mp3 file, Its is saying :
Gtk-WARNING **: Failed to load module "libgnomebreakpad.so": libgnomebreakpad.so: cannot open shared object file: No such file or directory
Message: device: default
** WARNING **: Failed to open font: "-adobe-helvetica-bold-r-*-*-10-*". Sound card is already enabled, as when Linux Starts it play some default sound,
View 4 Replies
View Related
Oct 15, 2010
I am running my PC on Lucid. It has been working fine, but suddenly the other day I got an error message when booting, saying that Nvidia kernel module failed to load. I had to boot in low graphics mode. The only thing i can think of that had changed is that I had recently upgraded to latest Linux kernel 2.6.36-25.I have tried carefully following tips on numerous threads on this forum and others, but still no go. I have purged nvidia drivers and reinstalled nvidia-current (also tried nvidia-glx-185). However, when I then do <sudo modprobe nvidia>, I get this message:
WARNING: All config files need .conf: /etc/modprobe.d/lrm-vide, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/bad_list, it will be ignored in a future release.
[code]....
When I go to System>Administration>Hardware Divers, it shows Nvidia-current as present but not currently activated.I have blacklisted vga16fb and nouveau in blacklist.conf, done <sudo nvidia-xconfig> etc.I am at a loss as what to do next, and am still new enough to Linux to not be in a position to fiddle to try fix it myself.
View 1 Replies
View Related
Jul 3, 2011
I'm unable to login to my Kubuntu Lucid. The login screen takes my password, blanks, then returns me to the login screen. I'm getting some graphics errors when running from recovery mode as well as the no space left on device error when attempting to start x from the terminal. Here are some outputs: When starting from recovery mode, selecting failsafeX from the Recovery Menu:
[Code]...
I've come to the conclusion that my root partition is full, but I'm not sure how to clear space, or how much to clear once I work out how to do it. I removed a few packages with apt, but it doesn't seem to have any effect. df -h shows that root is 100% full, yet it has 3GB free. I've grown comfortable with Ubuntu in the couple years I've been using it, yet this level of problem-solving is a bit nerve-wracking to me. I've been considering reinstalling (this machine is running Lucid upgraded from Karmic and Jaunty and has a few oddities), but I hate the idea of being forced to reinstall because I can't overcome this problem. If you need any other information or outputs from terminal commands, I'm happy to provide it.
View 7 Replies
View Related
Aug 8, 2010
I need to know I/O stats per process. When executed dstat give the bellow error message.
dstat -M topio -d -M topbio
Module topio failed to load. (No module named dstat_topio)
Module topbio failed to load. (No module named dstat_topbio)
CentOS release 5.3 (Final)
uname -r => 2.6.18-128.2.1.el5
How to resolve the above error message
View 2 Replies
View Related
Jun 27, 2010
I am interested in using fortran and an external library called matio used to save arrays to matlab .mat files. I have installed the matio and matio-dev packages from synaptics but i cannot compile a code receiving an error Code: christos@christos-laptop:~/Desktop$ gfortran -o test test.f90 -lmatio -lz test.f90:2.13: USE MATIO 1
Fatal Error: Can't open module file 'matio.mod' for reading at (1): No such file or directory How can i load a module in order to use it in fortran through the GCC compiler?
View 1 Replies
View Related
Dec 15, 2010
I have installed suse 11.2. Sometimes while using (firefox, okular, open office etc) x server restarts & comes to login screen. While checking Xorg.0.log i found i810 module is failed to load. Is this causing the x server restart?
View 9 Replies
View Related
Feb 17, 2010
I`am trying to install drivers for a very old graphics card GeForce2 GTS/Pro on Suse 11.2. I downloaded driver NVIDIA-Linux-x86-71.86.13-pkg1.run and install it successfully. But when I launch "sax2 -r -m 0=nvidia" it crushes with error "isax: could not import file: /var/cache/sax/files/config at /usr/sbin/isax line 199"
[Code]....
View 9 Replies
View Related
Apr 22, 2010
I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies
View Related
Dec 25, 2010
On Slackware 13.1, I am trying to connect to another computer using:
X :1.0 -query <hostname>
but I get a black screen and then the following error:
$ X :1.0 -query slackserver
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
[code].....
I tried to connect to both another Slackware 13.1 computer and a Debian computer. I also edited the /etc/X11/xdm/Xaccess file on the remote host to enable the graphical login access. I always get the same error.
View 4 Replies
View Related
Sep 29, 2010
i just recently upgraded to Ubuntu. I also just installed the Nvidia 256.53 drivers for my gtx 460. I did that and it worked fine. But the other day i did some updates that were prompted to me on the desktop. So i did those, then i restart and i got "Failed to load the NVIDIA kernel module." It then asked if i wanted to run in nvidia low graphics mode, which i did. So i am currently trying to figure out how to fix my NVIDIA drivers so that i have 1920x1080.
View 5 Replies
View Related
Jan 30, 2011
I need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I building the kernel for a MIPS processor.
View 3 Replies
View Related
Aug 31, 2010
I spent quite a lot of time jumping from one thread to another trying to fix a problem with my NVIDIA drivers in Lucid. I was getting the error message on startup: NVIDIA: Failed to load the NVIDIA kernel module ...Failed to load module "nvidia" (module-specific error, 0) No drivers available".
After a lot of trial and error, this is what worked for me (I have updated this thread following [URL]):
- Download the latest NVIDIA driver from www.nvidia.com/page/drivers.html
- In the terminal cd to the directory where you downloaded the driver package (e.g., $ cd Downloads)and make it executable (e.g., $ sudo chmod +x ./NVIDIA-Linux-x86_64-256.53.run)
- Edit blacklist.conf $ gksu gedit /etc/modprobe.d/blacklist.conf
and add the following lines to the end of the file:
#recommended by http://ubuntuforums.org/showthread.php?t=1467074
blacklist vga16fb
blacklist nouveau
blacklist rivafb
[Code].....
View 2 Replies
View Related
Aug 6, 2010
I'd like openSUSE to automatically load a kernel module (e.g. libsas) at boot time even no device requires it. In Ubuntu, you would add the module name to the file /etc/modules. Is this the correct place for openSUSE as well?
View 1 Replies
View Related
Oct 28, 2010
Why am I getting this error: ERROR: Module mod-wsgi does not exist!
$ sudo a2enmod mod-wsgi
Code:
ERROR: Module mod-wsgi does not exist!
$ sudo a2enmod mod_wsgi
Code:
ERROR: Module mod_wsgi does not exist!
[Code]...
View 1 Replies
View Related
Jan 21, 2010
I have a loadable module, simple enough I believe it should run on any 2.6 kernel. I want to force the load and test that assumption. How can I do it?
ismod does not seem to notice the -f in 2.7 modprobe has -f but cannot locate the module.No go. So I read the manpage for modprobe which says: modprobe looks in the module directory /lib/modules/'uname -r'.So I copied MYMODULE.ko to /lib/modules/2.6.(the only directory in here) and type: modprobe -f MYMODULE.ko.Still can't locate MYMODULE.ko.I notice there are no other .ko modules in that directory; so I go in deeper to kernel/drivers/char, guessing about the char directory, and copy MYMODULE.ko there.
View 1 Replies
View Related
Jun 14, 2010
I have Apache/2.2.14 (Ubuntu) DAV/2 SVN/1.6.6 mod_fcgid/2.3.4 Phusion_Passenger/2.2.14 PHP/5.2.10-2ubuntu6 with Suhosin-Patch configured In UBUNTU 10.04 I like to install apache2 mod_perl I make apt-get install libapache2-mod-perl2 and I get: Quote: libapache2-mod-perl2 is already the newest version.
Ok I try sudo a2enmod mod_perl ERROR: Module perl does not exist! how I make Perl work in apache2 UBuntu 10.04
View 3 Replies
View Related
