Ubuntu :: Disk Resize Failed Now Windows Won't Boot
Nov 27, 2010
I am running out of disk space, so I decided to resize Windows 7 on my first hard drive, so I could add another ext4 partition to put data on. However, gparted threw an error during the resize, and left with me a un-bootable Windows 7 partition. Windows 7 gets up to about where the login screen appears, but then BSODs and reboots. Unfortunately, the bsod is so fast, that I cannot see any details. Windows 7 recovery mode cannot fix the issue. When I try to repair the disk in gparted I get this error:
ERROR: Current NTFS volume size is bigger than the device size!
Corrupt partition table or incorrect device partitioning? I have attached my gparted_details log files, in a zipped folder.
View 9 Replies
ADVERTISEMENT
Aug 1, 2010
I was trying to resize an external ntfs hard drive, so that I could make room at the front of the disk for a swap partition. At the end of the process gparted encountered an error. It couldn't see my disk again until I rebooted the system. Now, when it looks at the hard drive, it sees it as one big unpartitioned hard drive.
I'm pretty sure all the data is still there, uncorrupted. I just can't access it. How can I fix this?
View 1 Replies
View Related
Nov 3, 2015
I installed Debian on my PC with a Acer Stock motherboard (xc600) with amd64 and after the installation finished it told me to remove my installation media and reboot. After reboot I was returned this message ' ERROR: No boot disk has been detected or the disk has failed.'. I have verified with gparted using mint live OS that I have Debian installed on my system.
I got believes that this may have be caused by a broken grub or I need to configure something I don't know how in BIOS.
I will update the topic later..
My installation media was a USB 2.0 flashdrive with a Debian 8.2 Jessie Installer and 9 different Linux distros. I have installed Debian multiple times before on my laptop and never had this problem so I know how to go through the installation process and set the partitions.
View 3 Replies
View Related
Jan 6, 2011
I am running a dual boot with XP and Ubuntu - what I want to do is increase the partition size of Ubuntu and reduce XP. When I run " G Parted" it shows both partitions with Xp being NTFS. I guess the boot loader is Grub because Ubuntu takes priority at Boot. I cannot persuade G Parted to allow me to resize the two different partitions. I am using the G Parted Live CD.
View 1 Replies
View Related
Aug 8, 2010
Regarding the installation of ubuntu 10.0.4 on my HP pavilion DV5000 laptop.
I previously installed windows 7 in my laptop and i would like to have ubuntu and windows 7 in dual boot. in order to do that i need to free up some space to be able to install to create partitions for ubuntu and the swap even if I have 30GB of unused space.
When i launch the live cD and i reach the step 4 ubuntu is actually recognising three operating systems installed:
- windows 7 (loader) under dev/sda1 (92,86GB) NTFS
- windows NT/2000/XP (which is corresponding to my "HP recovery" partition) under dev/sda2 en FAT32 (6,2GB)
- windows XP embedded (I don't unerstand what it is) under dev/sda3 NTFS (1,1GB)
when I go to the step 6 to modify the size of sda1 to free up some space, i don't have the possibility to change it, i can read "unknown" under the used space collumn.
I also tried to resize this partition using gparted but unfortunately i had the same problem, when i select it all the options to modify it are greyed out and i can notice a key near the hard drive logo (is it locked ?).
View 2 Replies
View Related
Sep 1, 2010
I had a a problem booting last night when my laptop battery came loose and caused a crash during boot.It ceased loading a daemon and I turned it off with the power switch, then I received the boot error,then i checked the linuxdrives directory and it was corrupt,I then, out of ignorance, ran wubi from within windows XP and said unistall believing that it would reinstall and fix itself.Thus you can see my green behaviour.I have been searching the threads and have tried many things but have had no success, I will suffer a great loss if I lose that load of Ubuntu as I have allot of work stored there, and in my Thunderbird accounts.
View 8 Replies
View Related
Jan 7, 2009
I'm trying to resize a partition on an IDE hard disk to use the entire disk but can not get more than a 309GB partition. I can get 295, 300, 301, 302GB, etc... fine but start getting problems with anything over 309GB. I get the following error with 310GB or more:
error: block relocator should have relocated 533 Warning: You should reinstall your boot loader before rebooting. Read section 4 of the Parted User documentation for more information. I am using Slackware 12.1, GNU parted 1.8.8, ext2 filesystem.
Some output that may be of use:
root@asus:~# parted /dev/hdb print
Model: ST3500630A (ide)
Disk /dev/hdb: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
[code].....
View 3 Replies
View Related
Apr 25, 2011
I applying changes through update manager in ubuntu 10.04 then my computer froze. So I had to restart it manually.
Now I can't boot ubuntu normal or recovery mode.I get an error message saying 'the disk drive / is not ready yet or blah blah'.I don't have a livecd to fix it this with... but here is my 'cat /etc/fstab' relevant output
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0
View 9 Replies
View Related
Jul 8, 2010
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
View 1 Replies
View Related
Feb 23, 2010
I was running Ubuntu 9.04 Desktop on a headless Pentium 4 machine which is our file, mail, web & fax server. The two x 250GB SATA hard disks were in a RAID 1 array with full disk encryption. Ran the 9.10 upgrade via WEBMIN and it failed. I should have known then to copy over everything to a backup disk, but instead I rebooted.
On restart the machine accepted my encryption passphrase but promptly hung with a mountall symbol lookup error - code 127. So I can't start the machine to get at the disks, and using a Live CD is useless as it has no way to open the RAID array to get at the encrypted partitions. Although we have data backed up (as at last night) I'd hoped not to have to rebuild the entire server from scratch. But its looking bad.I have taken one drive out and plugged it into another machine (Hercules), and the partitions show up as /dev/sdb1 /dev/sdb2 /dev/sdb3.
If it weren't for RAID, I could open /dev/sdb2 the main partition) in Disk Utility and enter my encryption passphrase to get access. But RAID adds a layer of obstruction that I have not yet overcome. I used mdadm to scan the above partitions and created the /etc/mdadm.conf file, which I edited to show the 2nd drive as missing (rather than risk corrupting both drives). I activated the RAID array with mdadm, and cat shows:
Code:
root@HERCULES# cat /proc/mdstat
Personalities : [raid1]
md1 : active raid1 sdb3[0]
1815232 blocks [2/1] [U_]
[Code]...
I've been searching the web for hours but have yet to find someone with a solution to this situation. If anyone has a thought on how to access this disk I'd be pleased to hear from you. In the meantime I will start building a new (9.10) machine from scratch, without RAID, 'cos that's probably going to be necessary.
View 1 Replies
View Related
Jul 20, 2011
Dual boot PC, boot disk and WIN XP are on good disk, Ubuntu was installed on failed disk. (I prefer separate disks for each OS).
I know I will need to reinstall Ubuntu later, and of course, GRUB2 now crashes without the Ubuntu disk.
Confirm that the only thing I need to do when I get the new drive installed and partitioned is to boot my XP disk in Recovery Mode and type "fixmbr", (then reboot to confirm clean WIN operation on the existing disk) then install Ubuntu as normal on the new disk.
View 1 Replies
View Related
Oct 20, 2010
I downloaded the Fedora live dvd iso file, burned it to a dvd. I was wondering if I forgot to do something or did I do something wrong. When I try to install from the dvd I get this error message, isoLinux: Disk error 80 , AX = 42A7 , drive 9F Boot Failed: press key to retry When I press a key to retry I get the same error. I also tried to install virtual pc and get not boot disk found.
View 3 Replies
View Related
Jul 5, 2011
The problem is this: I have a 320gb HDD splitted in 4 partitions. When I first installed Windows XP I formatted the HDD in 3 (Windows system partition, Media partition and another one I left for Linux). However Linux requires another partition for swap. Everything was just fine. One day Windows stopped working and I tried re-installing it. After the system was ready to start, Windows failed to boot with "NTLDR is missing" message. I tried to recover the Master boot record, even replaced NTLDR manually - nothing worked. I read that in order a HDD to be partitioned in more than 3 parts the so called "extended" partitions must be created. I think this may cause the problem but I don't want to wipe out everything (I have more than 100 GB of books most of which are not available anymore in the same locations I have downloaded them)
View 1 Replies
View Related
Jan 25, 2011
I'm running out of space in wubi. Online wubi help didn't help much since they suggest creating extra virtual disk space(similar to having a diffrent partition i guess) .None of them speak about increasing the size of /root disk space(or root.disk). I store all files in space shared with windows or external disk and use ubuntu only to install and use softwares and browsing. So how do increase the available space for installing more softwares?
View 3 Replies
View Related
Apr 16, 2010
Well today I decided that I couldn't wait for the offical release of 10.04 LTS, so I upgraded from 9.10 to 10.04 LTS Beta 2. After realizing that many problems had come with that update, I decided to just format my Ubuntu partition and reinstall it. Somehow my GRUB stopped working from when I formatted Ubuntu, so I whipped out the old Toshiba recovery disk for Windows Vista 32bit. After many attempts to have the recovery portion of the disk fix all of my problems and seeing no results, I decided that reinstalling Ubuntu (and GRUB) might make everything all better. Well it didn't. Grub shows my Windows partition but fails to boot it. After selecting it, it goes to a blank screen and stops responding. And to add to all of my problems, my BIOS has changed slightly. It no longer shows/or responds to F2 or F12 when I tried to give another try at that Toshiba recovery disk. That kinda sucks since I can't choose what to boot. Please help me!! I really don't want to have to format my entire hard drive and try to install Windows Vista again (Not that Vista is anything anyone should love) I have many expensive programs that can only be activated a certain amount of times. I don't even think that I could reinstall Vista since my BIOS won't let me boot the CD/DVD drive.
View 7 Replies
View Related
Mar 30, 2011
I have a single harddisk partitioned with Ubuntu Maverick and Windows 7 installations. I installed Windows first and then Ubuntu, after resizing partitions and adding a new one for Ubuntu. Win7 did not appear in the Grub2 boot menu. I added it (sda3), but on rebooting, I get the message "BOOTMGR is missing/Press Ctrl+Alt_Del to restart".
I understand that Win7 might have put its boot manager in another partition, and sda1 had FAT. I added sda1 as another grub2 entry, but when I try that, I get the error message "Windows Boot Manager/ Windows failed to start. A recent hardware or software change might be the cause... Status 0xc0000225/ Info: The boot selection failed because a required device is inaccessible." Attached are fdisk and parted outputs; and the grub2 files I created. How do I get Windows 7 to boot up?
View 6 Replies
View Related
Jul 7, 2009
I have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies
View Related
Feb 6, 2011
I tried multiple times and they both failed! Why? What could I do to get past this issue?
View 9 Replies
View Related
Apr 20, 2010
I have an external hard-disk with two partitions, a fat32 and an ext3.I open gparted to resize the partitions but the only allowed operation is to check for information (see screenshot).
View 2 Replies
View Related
Mar 23, 2011
When I created the disk, I specified dynamically growth, but when I tried to copy a file larger than the available disk space (500MB), a message showed up saying that it couldn't be done.
Image resizing was added with VirtualBox 4.0:
VBoxManage modifyhd
<uuid>|<filename>
[--type normal|writethrough|immutable|shareable|
readonly|multiattach]
[--autoreset on|off]
[--compact]
[--resize <megabytes>|--resizebyte <bytes>]
So why my VirtualBox 3.2.8 let me create the disk with dynamically growth option??
View 4 Replies
View Related
Jan 17, 2011
The boot.ini file for windows fail(reason unknown) and now i cant boot to any installed OS. Used Ubuntu live from usb to explore the disks, but as i tried to mount the W�ndows partition it failed..
Code:
# mount -t ntfs-3g /dev/sda /media/c/
ntfs_mst_post_read_fixup: magic: 0xffffffff size: 1024 usa_ofs: 65535 usa_count: 65534: Invalid argument
Record 0 has no FILE magic (0xffffffff)
[code]....
View 6 Replies
View Related
Jul 25, 2010
i do not get this i have a computer here that i installed ubuntu 10.04 on it side by side with windows using the ubuntu installer now windows will not boot at all it just restarts every time we try to boot into it now im not stupid i tryed reparing the os many times with the disk no luck when i was exploring in the windows cds command line it showed that his intire os was moved to the d:/
View 14 Replies
View Related
Feb 1, 2010
I need to resize a NTFS partition in a disk for which I have an image (dumped with dd).
I mounted it through the loop device on linux:
# losetup -o 32256 /dev/loop0 disk.img # I got the offset from looking at fdisk's output
# mount /tmp/t /dev/loop0
# ls /tmp/t
[content of NTFS partition shows correctly]
# umount /tmp/t
# gparted /dev/loop0
gparted shows me the disk correctly; it just contains one large NTFS partition I want to shrink.
I have it had it running for one hour now.
Question: will this work? There is lots of disk access but the timestamp and size of the underlying file disk.img remain unchanged.
View 1 Replies
View Related
Mar 30, 2010
OS: LINUX RHEL5
I want to resize the partition
for example..
my
/u01 is 50 gb.
/u02 is 30 gb.
i need to risize /u02 to 100gb( i have space left of around 60 gb and I need to take 10gb from /u01)
View 1 Replies
View Related
Apr 15, 2011
ok basically i have 2 hard disks one Seagate 500GB Sata, and one Western digital SATA my windows 7 is on the western digital and i think thats sda1, and opensuse is on the seagate the grub loader is on the western digital, and earlier today everything booted fine, till i went to boot windows
i had 2 "other" options, i selected the first one and it failed, the second other booted to windows, after about 3 hours on windows and doing nothing. i went to reboot and go to opensuse, and got a "grub loading stage 1.5., please wait" and it loads forever and nothing happens, it just idles im currently on the livecd just to get an operating system to use to get the net
View 9 Replies
View Related
May 6, 2011
I didn't know a resize operation on a 750 GB disk was going to take 40+ hours, and I was biting my nails the whole time, until the power went out when "only" 8 hours where left.I can still mount the partition, and many of the files are still there, but some files show as '? ? ? ? ? filename.ext' with ls -l.If I try to go inside such a directory: Input/output error.
View 1 Replies
View Related
Jan 27, 2011
I'm fairly new to ubuntu. I set up dual boot with 10.4 (64bit) on a machine with windows 7 installed first.Everything worked just fine but it seems that there is a bunch of unallocated space on my hard drive. Can anyone explain what all the different partitions are and if/how I can "clean it up"?
View 3 Replies
View Related
Jul 27, 2010
Whenever I load Ubuntu on a machine with other OS(s) loaded it always recognizes and adds an entry in the bootloader menu. Not this time. Well kind of. After the install my windows boot option was in the menu, but after an update it is no more. I see the different Linux images... but no Windows boot option. Can someone tell me how to add my windows XP boot option back to the bootloader? I have XP on the the on the 5th partition and Ubuntu on the 6th...
View 3 Replies
View Related
Feb 13, 2010
I've been wanting to do this for a while and after upgrading some of my pc components I decided I would finally try to dual boot with full disk encryption on both windows 7 and Ubuntu 9.10. I managed to encrypt the windows drive with truecrypt and that worked. I installed Ubuntu 9.10 using the alternate cd and everything but /boot is in an encrypted LVM. Each OS is on a separate SATA drive the windows is on sda1 and ubuntu /boot is sdb1.
To setup the dual boot I started out following the tutorial [url] but its for XP and versions of ubuntu that use grub not grub 2. I ran dd as posted and saved the files it produced from truecrypt. I then ran into some problems with grub reinstallation so I simply reinstalled Ubuntu 9.10 from scratch again. This put grub 2 on the computer. I've managed to get it to add a Windows 7 option.
However, when the option is selected truecrypt comes up and says that the bootloader is corrupted and that I need to use the repair CD I burned before I encrypted the drive. My question is does anyone have any experience dual booting using Truecrypt on Windows 7 and LUKS/dm-crypt on Ubuntu 9.10 with grub 2? And how would I get the boot menu to work? I'd rather not reinstall but if I have to I have images from right before I encrypted so it wouldn't be the end of the world.
View 4 Replies
View Related
Nov 16, 2010
I've had Ubuntu 10.10 installed for a while and I recently cleared a partition to install Windows XP. However, when I load from the Windows XP boot CD, I get "7379one MB disk 0 at ID 0 on ?Bus 0 on atapi(Setup cannot access this disk)". I've tried just about everything
View 4 Replies
View Related
