Ubuntu :: Lucid-Disk 1 Of 2 Failed - Now GRUB2 Chokes On Dual Boot
Jul 20, 2011
Dual boot PC, boot disk and WIN XP are on good disk, Ubuntu was installed on failed disk. (I prefer separate disks for each OS).
I know I will need to reinstall Ubuntu later, and of course, GRUB2 now crashes without the Ubuntu disk.
Confirm that the only thing I need to do when I get the new drive installed and partitioned is to boot my XP disk in Recovery Mode and type "fixmbr", (then reboot to confirm clean WIN operation on the existing disk) then install Ubuntu as normal on the new disk.
i had a dual boot with xp and lucid lynx, then upgraded the xp to win7. windows commonly overwrites grub with it's bootloader. and so it did. now i can't access my lucid OS. i need to get grub back (i need to get lucid back).
After upgrading to 10.04 from 9.10 Win7 wouldn't startup any more. So I tried this HowTo: [URL] to restore Grub2. But now each time I boot up I get this two lines: error file not found grub rescue> I have NO idea what to do.
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code: Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
I recently got a netbook and setup as dual boot between win7 starter and 9.10 (64bit). Win 7 starter is not impressive so i want to nuke it and give the space all to my /USR partion. I am comfortable working with Gparted and assume that i can launch using my gparted live usb and delete the windows partion and then resize the /usr partion.
what changes do i need to make w/ Grub2? I would prefer not to see the Grub menu at all and have it load right the main kernel if possible. Also, if this is possible is there a way to get to the Grub menu during boot should i need to select a different kernel?
After installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-
[Code]....
Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-
[Code]....
But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off
After a lot of updates yesterday I have found that Lucid will no longer boot, I just get a blank screen that has a cursor flashing in the top left corner. I can't boot into recovery mode to see what the issue(s) might be because I took that option out when I ran update-grub.My question is this, is there a way to run update-grub -either from a live-cd or grub-rescue mode- that would put the recovery boot option back in? I have already edited the /etc/default/grub file to comment out the field.
I've already had WinXP SP3 installed on one HDD, so i've installed 10.04 on my spare HDD. When I try to boot to Win, I get ntoskrnl.exe missing error. This is my boot info script report:
Code:
Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Windows is installed in the MBR of /dev/sda => Windows is installed in the MBR of /dev/sdb
[code]....
I've tried with different boot orders in bios, reinstalling Grub2 (several times ), I've even tried to install lilo through software center but didn't know how to configure it ...
Last week I installed minimal Ubuntu Karmic with XBMC live on my HTPC. I'm connecting to my fileserver thru a wireless interface and although that works like a charm most of the time, every once in a while the interface doesn't come up during boot and the PC 'hangs'.
I then press ctrl+alt+del and the pc reboots and the Grub2 boot menu appears, I suppose because the previous boot didn't go well. However, the boot menu doesn't have a timeout, I have to press <enter> to continue booting. My wireless USB-keyboard isn't working at that stage yet, so I'm unable to continue.
I am quite experienced user of Ubuntu desktop / server distributions. Recently my desktop 9.10 disk failed and I decided to reinstall using 10.04. My configuration is a dual disk dual bot system. I have XP Pro SP3 on one disk and Ubuntu 10.04 on second. XP has own, untached MBR ubuntu got Grub 2 installed on the same disk as Ubuntu. Ubuntu disk is booting first in BIOS. Grub 2 detected both system, however I can boot only to Ubuntu. When I am trying to boot XP I got black screen only. Looks like booting is stack in BIOS stage, because crt+alt+del reset system.
I read Ubuntu forum, search Google and did not come with any solutions. My XP MBR is OK. I can boot directly, choosing XP HDD in BIOS as a starting disk. All entries in grub.cfg looks fine to me. I made 3 different clear installations of Ubuntu. Each with the same result. I reinstaled Grub2 with no effect. I wonder if this may be a hardware/Grub 2 compatibility issue. I am using quite old components.My motherboard is Assus P4C800 Delux. I have 5 HDDs 2 CD. Exactly the same configuration was OK with 9.10/XP dual disk dual boot using Grub legacy.
I installed Debian on my PC with a Acer Stock motherboard (xc600) with amd64 and after the installation finished it told me to remove my installation media and reboot. After reboot I was returned this message ' ERROR: No boot disk has been detected or the disk has failed.'. I have verified with gparted using mint live OS that I have Debian installed on my system.
I got believes that this may have be caused by a broken grub or I need to configure something I don't know how in BIOS.
I will update the topic later..
My installation media was a USB 2.0 flashdrive with a Debian 8.2 Jessie Installer and 9 different Linux distros. I have installed Debian multiple times before on my laptop and never had this problem so I know how to go through the installation process and set the partitions.
I recently installed Ubuntu 10.04 on my dual boot system and noticed that my boot options were changed. I typically have Windows XP as the default OS. Here are the steps that worked for me to get Windows XP as the default boot using Grub2.During my initial Window XP install I had partitioned my hard drive into 3 partitions:
Code: Partition 1: NTFS format (Windows XP installation) in Linux it is called /dev/sda1 Partition 2: NTFS format (Data for Windows XP) in Linux is is called /dev/sda5
Been using Linux for many many years but Grub2 is annoying the heck out of me at the moment.
My home desktop PC is set up as follows:
/dev/sda � 40GB 10k Raptor with Ubuntu 10.10 installed /dev/sdb � 500GB HDD formatted to ext4 /dev/sdc � 500GB HDD split up as follows:
/dev/sdc1 � 80gb NTFS partition with Win7 installed /dev/sdc1 � Remaining drive space NTFS but nothing on it yet
Grub2 refuses to detect that Windows is installed on the 3rd HDD. I've googled and spent hours trying all sorts of things to get it to detect it and add it to my boot menu.
If I disconnect all drives except the Windows drive it boots up straight into Win7, so it's healthy and happy. (as healthy and happy as Windows can be, I need it for work purposes only!)
Does anyone have any tips on what would be the best method to force grub to realise that Windows is sitting there?
As far as I understand, the Win7 partition should be (hd2,1) � does that sound right to you?
I haven't tried booting off an Ubuntu CD and re-installing grub, since I can get into Linux and all the guides seem to be about how to restore grub after a Windows install eats it...
Today I attempted to install Win 7 on my Ubuntu 11.04 machine so I could dual boot. The Win 7b install went smoothly, but when I tried to fix grub everything went to hell.
I initially tried to reinstall grub using this walk though [URL] However, when I start the computer I get:
"GNU GRUB version 1.99~rc1-13ubuntu3
Minimal BASH-like line editing is supported....
grub> "
I tried to use the technique in [URL] to solve the problems, but when I try to run chroot I get a bin/bash error (I don't have the full error handy, but can rerun the steps if needed). The only potential cause that I can find doesn't apply to me since I am using a 11.04 64 bit live usb on a 11.04 64 bit install.
I have read that installing ubuntu 10.10 will inevitably install grub2 with it(unless you use flash drive workaround). i am wondering how slackware 13.1 reacts to grub2.
Does it go on like nothings changed (if configured correctly)? Or does it freak out and have a fit? If slackware doesn't play nice with grub2. i don't think i will use ubuntu 10.10.
I'm thinking of dual-booting Ubuntu 10.10 and Arch Linux. It seems that I'll have to do some editing of the grub.cfg file, but I have seen numerous warnings not to do so. After a bit of poking around, I've heard about a script that does the editing for you built in to Linux (or maybe just Ubuntu).
My questions are:
- If the aforementioned script does exist, how do I use it?
- else if it doesn't exist, how do I not directly edit grub.cfg?
I deleted 2 ubuntu partitions using Vista's manager, and expanded the unallocated space in to the Vista partition. when I restarted a screen came up saying error: no such partition grub rescue> Is there any way I can fix this ( by deleting grub, or something...)
I have a win7/10.10 dual-boot set up, more or less following the lifehacker.com tutorial (I know, I know). I had to reinstall windows, and its taken over the MBR so that only win7 boots now. My shared drive and the ubuntu filesystem are still there, I just can't get to them without a boot cd. So, I tried to follow the tutorials, which all basically say to reinstall grub or grub2. I tried one method, but ubuntu told me that installing grub2 anywhere but the MBR was a bad idea
I've just installed the 64 bit edition of 9.10 on my workstation. My raid drivers worked without any custom installation, which is very impressive! I am however having a problem installing grub2. I boot to the live CD, run the install process, resize and partition my free space as an ext4 primary partition with mount point /. Everything installs except grub, so I'm always booting in to windows.This seems to be a bit off as I've never had this occur with dual booting before.
I have a Dell Studio 14 laptop with Windows 7 64bit preinstalled. The processor is core i5 and the machine has 4GB RAM. I freed 25GB of memory from my Hard disk and tried to install Ubuntu 10.04 (AMD). Everything went fine. I restarted and Logged into Ubuntu. It worked like a charm. Then I restarted to Windows7. This also worked well as expected.
But, when I rebooted again, I got a black screen saying that �No modules found. Press any key to restart� When I press a key, it says �No operating system found�, probably after checking through a network (it printed lines starting with PXE).
I tried exactly in the same way with Ubuntu 8.04 in my machine, and this worked without any problem. The Bootloader was not corrupted after restarting from Windows. I noticed the problem with Ubuntu 9.10 and 10.04. I feel like a problem regarding the bootloader version. AFAIK, 9.10 and 10.04 is using GRUB2 when 8.04 use the old version of GRUB. Will I have to switch to the legacy GRUB? (I would love to keep using GRUB2). If yes, I would like to know How.
I have a Dell ZINO HD and dual booted fine prior to 10.04. Grubs seems to not identify the Win7 OS partition correctly. According to Disk utility DEV/SDA1 is a DELL utility partition, DEV/SDA2 is the RECOVERY partition, DEV/SDA3 is my Win7 OS partition...and DEV/SDA5 is my Linux partition. Ubuntu boots fine... but with GRUB using SDA2 (HD0,2) for win7 I cannot boot to it... is there a fix?
The following is in my GRUB.CFG file ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sda2)" {
I'm using opensuse 11.2 and a week or so ago it suddenly stopped shutting down the computer, or rebooting. It shuts the screen down and that seems to be it, so I have ti switch it off. However a day or so later it began to reboot when asked, but still won't shut down. I'm dual booting it with Unbuntu 9.04 using grub2, but it's been that way for many months without problems.
Drive #1 (sda) Master CS Ubuntu 9.04 grub upgraded to grub2 version 1.96 Drive #2 (sdb) Slave CS Ubuntu 9.10 grub2 version 1.97 /boot is (sdb1) root is (sdb5)
grub2 is installed in /boot (sdb1) and the mbr of (sdb)
I want to be able to boot drive #2 from drive #1 grub menu at boot time. I have run �update-grub and it probes and finds (sdb5) and creates a new grub.cfg called grub.cfg.new in the /boot folder, but the new cfg file does not show (sdb5) or (sdb) it shows all other changes that I made such as splash screens and they are working. How do I get it to recognize drive #2 with Ubuntu 9.10. I can boot each drive independently of one another and I can boot 9.04 with 9.10 if I swap the drives around. And run update-grub The auto probe is working in the Ubuntu 9.10 and may be working partly in the 9.04.
This may or may not be a problem, but is a pain anyway. When I run update-grub in 9.04's grub version 1.96, it does not change anything in the current grub.cfg it does make a new file called grub.cfg.new I have to go into /boot/grub and change grub.cfg to old and change grub.cfg.new to grub.cfg I do not have this problem running the same command in Ubuntu 9.10's grub. It finds changes and os's and automatically updates the current grub.cfg
I have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
I have two hard disks sda and sdb. I have Windows XP installed on sda2 and Ubuntu 10.04 on sdb5. When I installed Windows XP, Ubuntu stopped booting. I tried to repair grub2 from a Live CD unsuccessfully. Now I have completely messed up my MBR of both HDDs. I just want to configure grub2 to load both OSes in dual boot mode.
I had a a problem booting last night when my laptop battery came loose and caused a crash during boot.It ceased loading a daemon and I turned it off with the power switch, then I received the boot error,then i checked the linuxdrives directory and it was corrupt,I then, out of ignorance, ran wubi from within windows XP and said unistall believing that it would reinstall and fix itself.Thus you can see my green behaviour.I have been searching the threads and have tried many things but have had no success, I will suffer a great loss if I lose that load of Ubuntu as I have allot of work stored there, and in my Thunderbird accounts.
I have been frustrated attempting to get Grub2 to boot a Debian Live system from hard disk. Have set aside a 4gb partition /dev/sda1 to contain the Debian Live and some other recovery tools. I actually have them all working from a 4gb USB stick successfully, but getting it to work on my HDD has proved challenging. On USB, I have PartedMagic, Gparted, Grml, and of course my standard 6.01 Squeeze. I have also managed to get the Debian Live booting from that USB stick. Very slick.
However, I can NOT get Debian Live to boot from my HDD; altho all of the others above boot fine. Have tried it two ways - one using an iSO image, which is how it is done on my USB stick. The other attempt is to copy the entire contents of the ISO to a directory.
Here are my directory structures:
debian_live_gnome_squeeze_i386- contains the following: debian-live-6.0.1-i386-gnome-desktop.iso initrd.gz initrd.img vmlinuz which is how it is laid out on my USB stick debian_live - contains the files from the ISO image The error I get is something like "panic unable to find live filesystem" My grub.cfg snippet for the two methods I have tried - the 2nd menuentry is similar to how it works on the USB stick.
menuentry "Debian 6.01 Live (on /dev/sda1)" { insmod part_msdos insmod ext2 set root=(hd0,msdos1)
[code]....
Probly don't really need to get it working since PartedMagic can do almost everything I need for recovery and I can use the USB for reinstall or whatever else.
I have updated from Karmic to Lucid not long ago, and everything went smooth and my system is been working like a charm for about a month. And it still does, with the only issue being that every time I restart my system, one of my partitions is checked.
My disk is split into 4 partitions: sda1, NTFS for windows sda2, ext4 for "/" sda3, ext2 for /home sda4, swap
Now what seems to happen is that sda3 is being marked as "not clean" on every shutdown, which makes me assume that is not being umounted at all.
I've been reading logs, commenting network drives out on fstab.. nothing does the trick.
I've booted into single mode and run e2fsck (which doesn't find anything wrong, and marks the FS as "clean") and then rebooted. The result is: if the FS wasn't mounted when I restart, then I get a clean boot once, but it is checked on the following one; if it was mounted then it is again checked at start-up.
Again, all points to the problem being that the FS is not cleanly umounted on shut-down.
I could not find any log with info of the processes killed and FS umounted at shut-down, so if anybody knows where to look, it could be a good start.
The problem is this: I have a 320gb HDD splitted in 4 partitions. When I first installed Windows XP I formatted the HDD in 3 (Windows system partition, Media partition and another one I left for Linux). However Linux requires another partition for swap. Everything was just fine. One day Windows stopped working and I tried re-installing it. After the system was ready to start, Windows failed to boot with "NTLDR is missing" message. I tried to recover the Master boot record, even replaced NTLDR manually - nothing worked. I read that in order a HDD to be partitioned in more than 3 parts the so called "extended" partitions must be created. I think this may cause the problem but I don't want to wipe out everything (I have more than 100 GB of books most of which are not available anymore in the same locations I have downloaded them)
