Ubuntu :: Can't Boot Windows - BIOS Won't Let Boot Up Disk ?
Apr 16, 2010
Well today I decided that I couldn't wait for the offical release of 10.04 LTS, so I upgraded from 9.10 to 10.04 LTS Beta 2. After realizing that many problems had come with that update, I decided to just format my Ubuntu partition and reinstall it. Somehow my GRUB stopped working from when I formatted Ubuntu, so I whipped out the old Toshiba recovery disk for Windows Vista 32bit. After many attempts to have the recovery portion of the disk fix all of my problems and seeing no results, I decided that reinstalling Ubuntu (and GRUB) might make everything all better. Well it didn't. Grub shows my Windows partition but fails to boot it. After selecting it, it goes to a blank screen and stops responding. And to add to all of my problems, my BIOS has changed slightly. It no longer shows/or responds to F2 or F12 when I tried to give another try at that Toshiba recovery disk. That kinda sucks since I can't choose what to boot. Please help me!! I really don't want to have to format my entire hard drive and try to install Windows Vista again (Not that Vista is anything anyone should love) I have many expensive programs that can only be activated a certain amount of times. I don't even think that I could reinstall Vista since my BIOS won't let me boot the CD/DVD drive.
View 7 Replies
ADVERTISEMENT
Apr 12, 2010
I had a dual boot umbutu 9.04 & xp Toshiba laptop satellite A15-S1292, (old bad battery). I use it mostly in linux but had been working in Windows, it may have hibernated and the next boot may have been to Linux. Now it boots straight into Ubuntu login screen that looks like it is may be returning from hibernate (don't use it normally). On boot don't see the normal BIOS announcement or screen allowing the selection of boot device. Doesn't boot Live CD from CD Rom or Suber Grub CD. When I examined the Windows mount receive warning that it could not be mounted as it was hibernated. I followed the suggested mount -t -ntfs -3g -o remove_hyberfile /dev/sda1 and can now access the windows partition. Boots still return to the same linux login screen. Don't seem to be able to boot from anything else.
View 1 Replies
View Related
Oct 14, 2010
I've got two laptops running Ubuntu. Both have had Lucid installed from the live cd. I have upgraded one of them to Maverick. Both distributions are running great after they boot up, but I haven't experienced any faster boot times with either distibution. Both boot to Bios and then the screen goes black with a blinking cursor in upper left corner of the screen. The black screen remains for 30 to 45 seconds and then I get the Ubuntu splash screen for maybe 5 seconds, and then desktop. Why am I not seeing faster boot times? I realize 45 to 60 seconds is good compared to other os's, but I anticipated much faster boot times. Shut down on the other hand is quite fast at maybe 5 to 10 seconds. Does anyone else get this black screen on boot? Seems like wasted time cause I can't tell what's going on during the time there is a black screen. This is not a real big deal breaker, as I don't reboot very often, but I just wonder why bootup isn't faster.
View 7 Replies
View Related
Nov 27, 2010
I am running out of disk space, so I decided to resize Windows 7 on my first hard drive, so I could add another ext4 partition to put data on. However, gparted threw an error during the resize, and left with me a un-bootable Windows 7 partition. Windows 7 gets up to about where the login screen appears, but then BSODs and reboots. Unfortunately, the bsod is so fast, that I cannot see any details. Windows 7 recovery mode cannot fix the issue. When I try to repair the disk in gparted I get this error:
ERROR: Current NTFS volume size is bigger than the device size!
Corrupt partition table or incorrect device partitioning? I have attached my gparted_details log files, in a zipped folder.
View 9 Replies
View Related
May 2, 2011
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
View 3 Replies
View Related
Jul 7, 2009
I have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
View 3 Replies
View Related
Jan 27, 2011
I'm fairly new to ubuntu. I set up dual boot with 10.4 (64bit) on a machine with windows 7 installed first.Everything worked just fine but it seems that there is a bunch of unallocated space on my hard drive. Can anyone explain what all the different partitions are and if/how I can "clean it up"?
View 3 Replies
View Related
Mar 24, 2010
Is it possible to boot from a disk image file(containing linux) file that resides inside windows and add a bootloader entry for booting from the disk image.?
View 2 Replies
View Related
Jan 9, 2011
I have a Centos 5.5 system that had 2 primary partitions (2nd is setup as LVM with multiple LVM partitions) and then installed Windows 7 as Dual Boot.
However, Windows 7 has installed a 200MB system partition which is GPT/EFI as partition 3 and the Win7 OS as a Primary Partition.
I have a heap of space undefined after this fourth primary partition.
However, as 4 primary partitions have been used, I can no longer create an extended partition to utilise this.
As such I would like to know what is the best and safest way to proceed, and if possible step by steps instructions for the best option eg:
1. Delete the Windows 7 System Partition and create the extended partition (I expect this will prevent Windows from booting)
2. Use something like partition magic to change the Win 7 OS Partition 4 to an extended partition (Not sure if this will work)
3. Make changes to the overall system including both Linux and Windows so that it will use GPT only (I have
had no experience with GPT so this is a bit scary)
4. Other?
View 2 Replies
View Related
Mar 17, 2010
i ahve to boot it from the command like an executable but i dont know how to exactly and when i thought i had it figured out i didnt know how to write the name of the file in the disk ubuntu just kept saying file or directory not found
View 14 Replies
View Related
Feb 13, 2010
I've been wanting to do this for a while and after upgrading some of my pc components I decided I would finally try to dual boot with full disk encryption on both windows 7 and Ubuntu 9.10. I managed to encrypt the windows drive with truecrypt and that worked. I installed Ubuntu 9.10 using the alternate cd and everything but /boot is in an encrypted LVM. Each OS is on a separate SATA drive the windows is on sda1 and ubuntu /boot is sdb1.
To setup the dual boot I started out following the tutorial [url] but its for XP and versions of ubuntu that use grub not grub 2. I ran dd as posted and saved the files it produced from truecrypt. I then ran into some problems with grub reinstallation so I simply reinstalled Ubuntu 9.10 from scratch again. This put grub 2 on the computer. I've managed to get it to add a Windows 7 option.
However, when the option is selected truecrypt comes up and says that the bootloader is corrupted and that I need to use the repair CD I burned before I encrypted the drive. My question is does anyone have any experience dual booting using Truecrypt on Windows 7 and LUKS/dm-crypt on Ubuntu 9.10 with grub 2? And how would I get the boot menu to work? I'd rather not reinstall but if I have to I have images from right before I encrypted so it wouldn't be the end of the world.
View 4 Replies
View Related
Nov 16, 2010
I've had Ubuntu 10.10 installed for a while and I recently cleared a partition to install Windows XP. However, when I load from the Windows XP boot CD, I get "7379one MB disk 0 at ID 0 on ?Bus 0 on atapi(Setup cannot access this disk)". I've tried just about everything
View 4 Replies
View Related
Oct 1, 2010
I have a dual boot System with Ubuntu 10.04 Netbook Remix and Windows XP SP3 on an Asus eeePC 1000HE. I had some troubles with updating kernels etc. and I ended up with following problem:
After grub reinstall, I am able to boot Ubuntu, also I can mount the windows partition properly. Trying to boot into Windows, I get the error:
Code:
It's all on one hard drive which doesn't show any errors:
Code:
Partition table entries are not in disk order
Code:
Some partitions don't show a file system because they are luks-encrypted.
As I mentioned earlier, I am able to mount sda1. I think the problem is that the Partition Boot Sector is corrupted, even though I am not sure if the ntfs partition is damaged at all or if GRUB is the problem.
As I said I had problems with a kernel update and therefore had to reinstall GRUB. I think, but I am not sure, that I accidentally installed GRUB on sda1 (the windows partition) instead of on sda. After I installed GRUB on sda again, I was able to boot linux and fixed sda1 with testdisk. Before, sda1 showed as four partitions (sda1p1, ... , sda1p4). I was not able to mount sda1 till I fixed it with testdisk. testdisk says the Boot Sector of sda1 is OK, so does ntfsfix.
Finally, an extract from my /boot/grub/menu.lst:
Code: ...
The Windows XP entry is added by myself. I don't know much about grub, so there might be the error.
I tried to keep it as short as possible (this is only the end of the story), I hope I didn't forget anything important. Please ask if there is something not clear.
I am in Tanzania with this netbook, so it is not possible to boot Windows CD and fix the windows partition with it, also I don't have a very fast Internet connection.
Is there a way to fix this without a Windows CD? Maybe it is just a dumb mistake in the menu.lst?
View 9 Replies
View Related
May 25, 2011
Today I decided to give Fedora15 a shot, mainly because of Gnome3, and so decided to install it over my Ubuntu installation. This is my partition scheme:Two NTFS partitions for Windows;
One logical partition, which inside has:
/dev/sda5 for /boot
/dev/sda6 for /
[code]...
View 14 Replies
View Related
Apr 8, 2011
I have multi-version Kernels on a Dual Boot WinXP / openSUSE 11,3 box. It's been a LONG time since I needed to boot to Win XP and now that I find that I can't get to it, I can not say for sure what I did to break it. Looking back, I suspect that the method I used for the recent removal of one of the Kernel versions may have been innappropiate. Rather than unchecking in versions/package groups I may have just removed the unwanted kernel in the package list. Not sure. I've tried dinking around with menu.lst and Yast Boot Loader to no success. I get errors depending on what I messed with. Didn't try to reinstall grub until I checked here for help with a fix.
Here's some info:
Code:
View 9 Replies
View Related
May 22, 2010
I'm trying to install ubuntu from a disk I got with a Ubuntu manual magazine, but once I choose the install option, the logo glows for a couple minutes then freezes and nothing happens. The same happens for running it without installation. Does anyone know what I should do? I'm currently downloading it onto a USB stick to attempt to boot it from that.
View 4 Replies
View Related
Sep 29, 2010
I have been having problems hibernating my windows 7 partition recently. It happened approximately right after I set up the dual boot.
I have found other topics where it says to make sure that the windows 7 partition is marked as the active partition. I have since done so and it has not changed anything. I did it with Partition Magic on Windows. I did find it suspicious though that my Dell Recovery partition is labeled as boot while the Windows one is marked as Active and System.
However when I looked at it using disk utility in Ubuntu the windows 7 partition is marked as Bootable while the recovery partition is not.
Hibernation works on Ubuntu with a couple error messages while shutting down and some weird screen issues while booting up. But it ends up working decently.
Under Disk Utility the Ubuntu Partition is not marked as Bootable. Should it be?
View 6 Replies
View Related
Sep 1, 2010
I had a a problem booting last night when my laptop battery came loose and caused a crash during boot.It ceased loading a daemon and I turned it off with the power switch, then I received the boot error,then i checked the linuxdrives directory and it was corrupt,I then, out of ignorance, ran wubi from within windows XP and said unistall believing that it would reinstall and fix itself.Thus you can see my green behaviour.I have been searching the threads and have tried many things but have had no success, I will suffer a great loss if I lose that load of Ubuntu as I have allot of work stored there, and in my Thunderbird accounts.
View 8 Replies
View Related
Feb 14, 2010
GNU GRUB 0.97
Ubuntu 8.04.4
2.6.24-26
Added an SSD (dev/sdc) and decided to move some less often changed directories there. Started with /usr and /boot, leaving / on a primary in the first drive, for now. All started ok, and my changed fstab mounted the right ones, and the system works.
However, grub is actually using the original /boot on / on sda1. I cannot see any way to change this. (Which makes it sorta hard to update the kernel
From grub:
Okay, since it has two choices, I tried to tell it which one to use. But, grub> root (hd2,5) does nothing.
Disk /dev/sda:
what I seem to recall, grub doesn't care about the boot flag on the disk. Nor does it care about primary vs. logical (except GNU doc says "makeactive" only works on a primary?).
The GNU doc also indicates that it looks for a directory /boot on the partition, so if you're mounting a partition as /boot, it also needs to contain a /boot directory under it. Tried that, but no change.
Is my problem the logical partition? Does that prevent "grub> root" from changing it? I'm afraid to wipe out the old /boot and find that I can't start up.
View 9 Replies
View Related
Jan 16, 2010
when i try to boot from the disk i burned, the screen show to lines of code, then pauses and never continues with any process.
View 1 Replies
View Related
Dec 30, 2010
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code:
Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
View 2 Replies
View Related
Jun 27, 2011
I meet a problem about "Your boot partition is on a disk using the GPT partitioning Scheme but this machines cannot boot using GPT." in installation. Does GRUB-0.97 on CentOS 5.4 support GPT?
View 4 Replies
View Related
Aug 29, 2010
I have been trying plop floppy to boot a bootable cdrom from a mobile USB cdrom reader, but the usb cdrom are not recognized.I was thinking that with grub or grub2 or syslinux that would be possible, no ?
View 13 Replies
View Related
Nov 16, 2010
i come from ubuntu installation and i have had opensuse before and i remember installing any of thede two without any problem on any of many harddisk arrangement. but thge ltest opensuse 11.3 doesnt pllay nice with my windows and ubuntu installation booting. i reember using boot loader in yast and it used to load the coorect setting from scratch. but now when i chose "propose new configuration" and it founds opensuse and three other windows!
[Code]...
View 9 Replies
View Related
Jan 26, 2011
I have installed Ubuntu 10.10 Minimal on a 2GB USB using CLI and it is working very well after adding a few applications. But this USB will be used only on machines other than my own - likely with Windows as the only OS. And it is not comfortable for me to go into the BIOS of a strange machine to change the order of booting and afterwards go back to reset the order , especially with the owner looking on, obviously worried, and wandering whether his machine will still be working!
So my question: Is there any way to boot from a USB without having to go into the BIOS? code...
View 1 Replies
View Related
Sep 19, 2010
im on an old (8 years?) hp that doesnt support booting from usb. will a bios upgrade change that?
View 1 Replies
View Related
Oct 16, 2010
I understand this is not directly an ubuntu issue, but this arose as I was trying to install ubuntu, so I'm hoping some kind souls on here would be good enough to help anyway.
I've in the past installed ubuntu on to my PC using a CD, but this time I thought I'd try creating a USB startup disk.
I was required to set up the BIOS to change the boot order so I can boot from the USB flash drive.
The problems arose when I pushed the 'DEL' key (the correct key for my motherboard) to access the BIOS setup. When doing this the computer completely froze and would not progress any further to boot. It would still boot normally from the HDD provided I didn't try to enter the BIOS.
Looking on the internet for a solution I tried using the motherboard jumper to reset the CMOS. Now I can't boot up the computer at all. I get a message saying 'CMOS checksum error - Defaults loaded' then it asks me to press F1 to continue. I try this, but nothing happens. Clearing the CMOS has made things worse as now I can't get the computer to boot at all.
Have I killed my motherboard somehow? I've tried using a different keyboard (one USB and the other a USB keyboard but with an adaptor to connect it to the P/S2 port).
On further investigation any key press from the keyboard is enough to freeze the computer at whatever point.
My motherboard is an WinFast NF4SK8AA with AMD Athlon processor and 4Gb of mem.
View 4 Replies
View Related
Nov 16, 2010
i have ubuntu 10.04 server on a usb (it is an .img file) , and i.m trying to install it on an ancient machine (64mb of ram to be exact), and it has no usb option in the bios menu.
View 8 Replies
View Related
Jan 15, 2011
I have a 7 port USB hub, and have more than 2 usb storage devices, but in BIOS it only allows me to run off of e:/ f:/ and h:/ (h:/ is my built-in card reader) I want to be able to add new boot options, or at least 1 more for G:/, is this possible?
View 3 Replies
View Related
Feb 21, 2011
I have a recent ACER laptop that I used to use with Ubuntu only, but Ubuntu has crashed and won't boot anymore. I tried booting it via the live CD to try and recover my files before re-installing everything, but the CD won't run automatically.
View 3 Replies
View Related
