Ubuntu :: Dell Docking Station Unusable With Natty
Jun 6, 2011
I recently upgraded to Natty (11.04). Looks great but: I can't use it when my laptop (dell latitude E6410) is plugged in my dell docking station. It seems like the attached monitor (DVI) does not get signal input and hence turn to sleep mode.I can say that Ubuntu is still running fine when I unplug it from the docking station.I am using the NVidia driver 270.41.06 (installed as a third party driver by the install process).I can successfully connect and configure an external monitor thru the VGA port.
View 1 Replies
ADVERTISEMENT
May 18, 2011
I have a Dell E6250 for work and a docking station with dual DVI going to two Dell 1908FPc. It looks like I can only configure two monitors and after I enable dual head support, X11 crashes. I can use Function+F8 to switch between them, but I cannot figure out how to get both monitors on at once. i.e. I close the lid of the laptop to use the dual monitors.
[Code]....
View 1 Replies
View Related
Mar 24, 2011
I have been using Linux and Ubuntu only since the last two months on my (2006) Sony Vaio VGN A617S laptop which is going pretty well on Ubuntu 10.10. When installing Ubuntu audio did get installed alright, and the speakers on the laptop itself are working well even now with the right drivers (snd-hda-intel) for the Realtek ALC260 soundcard.
My problem is when laptop is docked to the A/V docking station (I have seen it referred as a port replicator as well - the model number is VGP-PRAV2), with its two external speakers. And these were not on when Ubuntu was being installed. What is interesting is the headphones jack on the laptop does work when the docking station does not. I have been trying hard and have already tried quite a few things I saw to be related issues, like:
a) adjustments to some IEC958 in alsamixer
b) using a custom mod for the ALC260 card
View 6 Replies
View Related
Mar 24, 2011
I have been using Linux and Ubuntu only since the last two months on my (2006) Sony Vaio VGN A617S laptop which is going pretty well on Ubuntu 10.10. When installing Ubuntu audio did get installed alright, and the speakers on the laptop itself are working well even now with the right drivers (snd-hda-intel) for the Realtek ALC260 soundcard.
My problem is when laptop is docked to the A/V docking station (I have seen it referred as a port replicator as well - the model number is VGP-PRAV2), with its two external speakers. And these were not on when Ubuntu was being installed. What is interesting is the headphones jack on the laptop does work when the docking station does not.
I have been trying hard and have already tried quite a few things I saw to be related issues, like:
a) adjustments to some IEC958 in alsamixer
b) using a custom mod for the ALC260 card
View 1 Replies
View Related
Jan 9, 2016
Recently (in 2015) our Debian systems started not to recognize HDDs connected via an external docking station.
On my computer I run: (uname -a)
* Linux violin 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt9-3~deb8u1 (2015-04-24) x86_64 GNU/Linux
* If I connect to a flashdrive to the USB2 port, it is recognized as sd* (messages are also written to dmesg/syslog)
* If I connect the USB3 connector of the external docking station with an 1TB WD SATA docked, to this USB2 port (the external docking station has its own power supply, so I do not expect to have a problem with the current, the drive spins up and is spinning), there is nothing in the dmesg/syslog, and no new items under /dev/sd* or lsusb or similar tools.
* If I connect the same external docking station with the same disk via eSATA on a different computer it is recognized. That computer runs the same debian. If I connect through its USB2 port it does not work either.
* I also tried another docking station and USB cable.
View 7 Replies
View Related
Aug 6, 2015
While using Debian Jessie with Gnome 3 and Nautilus file manager, my Startech HDD docking station will not auto mount and can only be mounted using commandline while in root. Previous GNU/Linux distros, such as Ubuntu 14.04, this device auto mounted without issue. All other devices, such as USB HDD, and USB pen drives, auto mount without any problems.
"Initailize Startech device with a 120GB 2.5" SATA HDD Fujitsu drive"
udev creates two block devices
Code: Select all    begins with:
    brw------- 1 root root 8, 64 Aug 6 10:11 /dev/sde
    brw------- 1 root root 8, 65 Aug 6 10:12 /dev/sde1
    changes to:
    brw------- 1 root root 8, 64 Aug 6 10:11 /dev/sde
    brw-rw---- 1 root disk 8, 65 Aug 6 10:12 /dev/sde1
dmesg produces the following results:
Code: Select all[ 179.127724] scsi 6:0:0:0: Direct-Access   FUJITSU MHW2120BJ G2   0000 PQ: 0 ANSI: 2 CCS
[Â 179.128513] sd 6:0:0:0: Attached scsi generic sg5 type 0
[Â 179.129393] sd 6:0:0:0: [sde] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[Â 179.130379] sd 6:0:0:0: [sde] Write Protect is off
[Â 179.130388] sd 6:0:0:0: [sde] Mode Sense: 28 00 00 00
[Â 179.131903] sd 6:0:0:0: [sde] No Caching mode page found
[Code] ....
Between the thirty second and the fifteen second wait, the block device "/dev/sde1" receives the "disk" group and read/write attributes, however, the drive is still not auto mounted and can only be manually mounted via root. The block device "/dev/sde" remains with the "root" group and read/write attributes are accessible for "root" user only.
How to correct this issue to allow auto mounting?
View 1 Replies
View Related
Feb 21, 2011
I have HP Compaq 6530b laptop running Debian Wheezy AMD64. I have a docking station with a monitor supporting 1680x1050 resolution and the laptop monitor with 1440x900. The video is integrated Intel mobile series 4.Both monitors are identified and working OK. When I use the laptop monitor standalone it runs at the native resolution. When connected to the docking station I can choose dual monitors with both using their native resolutions and the desktop spread on both of them (with the laptop monitor being primary and containing the taskbar and icons). If I choose to mirror the display it sets itself to a lower resolution of 1280x1024 that is supported by both monitors.
The problem is that I want to use one monitor at a time. If I close the lid of the laptop it turns off both monitors instead of using the docking station. When the lid is closed I want the bigger docking station monitor to be primary and working at native resolution and if I open the laptop or remove the laptop from the docking station to use the laptop monitor at it's native resolution.I had Debian Lenny I386 before and it was operating as expected but I made a clean install of Wheezy amd64 and I don't know how to configure it.I don't have xorg.conf file so I don't know where it takes the settings from.
View 3 Replies
View Related
Nov 11, 2010
I use a Dell advanced port replicator at home and in the office. Each is connected to a second monitor. In neither place does the monitor actually receive a signal even though the monitor seems to be detected correctly in display settings. The function-F8 key does not have any visible effect.
Oh, almost forgot. At work once when I preparing to shut down the second monitor popped on for a few seconds though it was at the wrong resolution.
View 6 Replies
View Related
Aug 26, 2011
I want to "build" a new backup solution for my home LAN. I have 3 openSUSE machines at various versions and 1 File Server with openSUSE 11.4.My plan is to plug a eSATA or USB3 docking station on the file server and then take backups from the clients either via rsync or Amanda.Since the backup will not be a daily activity, I would like to have the option to run the backup during night, and automatically, BUT, without any action from my part. So, I would like to attach a large external HDD on the machine and then:Power on the docking station/HDD.Perform the backup from the Amanda Server or rsync scripts.Power off the docking station/HDD.Do you know any docking station that has a "linux" power management?If not, how do I power up/power down from console an eSATA or USB HDD?
View 2 Replies
View Related
Aug 25, 2010
I have an HP EliteBook 8540p laptop with associated docking station. It is running Ubuntu 10.04. Until now I have been successfully running TwinView with the nvidia-195.36.24 drivers - using the built-in LCD screen and an external LCD monitor, connected via an analog VGA cable.I've changed the screen over to a larger resolution Philips LCD, and it works fine over VGA.
However the image is not as sharp as I'm used to with other monitors, so I'm trying to get it working over the DVI port on the laptop docking station.However I have been quite unsuccessful in getting a picture to appear on the external monitor - Xorg is able to read the EDID information from the monitor, and according to Xorg.0.log has absolutely no problems with finding a valid mode and choosing this monitor as "DFP-1", alongside "DFP-0" (laptop display). But no matter what I do I can't get a picture. Xorg.0.log has no errors.
I have unsuccessfully tried: various combinations of xorg.conf options to set "ConnectedMonitor", "CustomEDID" with a EDID .bin downloaded over VGA, etc.a colleague has the exact same laptop and monitor, and has it running fine. However using his xorg.conf still produces no picture.nvidia-settings - tried lots of things a different DVI-connected monitorIt's as if the DVI port is fully functional in every way but its output is somehow disabled. I've also tried other monitors, they don't work either, yet do with a VGA cable.
EDIT: I have checked the DVI cable anything else in terms of enabling a DVI port.
View 1 Replies
View Related
May 2, 2011
I have never been more diappointed in the new user experience after an os upgrade. No, not even Vista was this diappointing. Unity just isn't for me. That's ok, I can just stick to Ubuntu Classic. As for the problem: I cannot use many of my applications. When I launch something, Firefox for example, all I see is a window filled with white. There is a title bar and nothing else. Sometimes, if I am really lucky, switching to something else then coming back fixes it. Usually it does not fix it, and can even cause other apps to go all white. This has happened in every app I have tried (I have tried a lot of them). It also happened under both Unity and Gnome.
My normal web browsers have not worked once since I upgraded. In general, the applications that seem to work most often are simpler ones. I am writing this post using w3m since it was the only way I could get this box online now... Does anyone have any advice for fixing this problem? This is not the first time I have been burned by a X.04 release. I might have to reinstall maverick...
View 2 Replies
View Related
Jun 18, 2011
I am running Natty on a Dell Inspiron 6000 under dual boot. Now Ubuntu refuses to load. GRUB goes along to a point where the final message in both regular and recovery modes is 81.8921591 atal: SRST failed (errno=-16). Is there any way I can recover short of having a professional rescue my data from the hard disk and totally redoing the install. I have had this problem in previous versions but never fatally before. My computer works fine under Windows.
View 1 Replies
View Related
Sep 1, 2011
I'm attempting to install Natty Narwhal Desktop 32-bit on my Dell Dimension 4700. I get to the screen with various options (Install Ubuntu, Test Memory, etc.) but on choosing boot from disk or install, I just get a black screen. Any ideas what might be the problem? I'm don't have much experience with Ubuntu, so a simple explanation would be preferred.
View 1 Replies
View Related
Nov 19, 2010
I recently bought a second monitor and I had this set up perfectly fine with two panels on my primary display and one on my secondary. I've now gone away for the weekend (leaving the monitor) and I went to turn on my laptop and it didn't work.
When I login to a gnome session (or indeed a failsafe gnome session) I just got two horizontal white bars (where the panels would be). I switch to a terminal, login and run top and see that gnome-panel is on 100%. Running 'killall gnome-panel' does nothing (tried a few times).
I've had to install xfce4 just to type this message. Is there any way I can 'reset' gnome-panel or any other fix? Or even a workaround would be nice. I'm on 9.10 by the way. I am going to upgrade at some point but its not really an option yet.
View 3 Replies
View Related
Jul 9, 2010
I want to display cpu temperature and fan speed, network activities, load, etc on a simple window mangement, such as fvwm, wm, or blackbox. Is there a software in slackware packages to show these sensors reading in X windows similar to wmsupermon? I don't want to compile it, if slackware has something same that i can just use.
View 1 Replies
View Related
Mar 31, 2010
The radio station is located here
Click Here:
Then click to listen
But when it comes up there it does not play for some reason.
It was working fine with ubuntu 8.10 no problem at all.
What did I do wrong here ?
View 9 Replies
View Related
Feb 27, 2010
I want to stream a radio station that uses .cfm . I've tried a lot of options but without success. Anyone have experience with cfm?
I can stream other stations using vlc media player and even Adobe flash player. But no success with this cfm stream.
View 2 Replies
View Related
Sep 14, 2010
I'm having an issue with rhythmbox in Lucid. I can add and play new radio stations fine. However, upon closing rhythmbox and reopening the radio station disappears from the list. Is there a way to get the stations I add to stay?
View 5 Replies
View Related
Oct 18, 2010
Anyone know how I can play a .wax radio station on ubuntu. The link I have is:URL...I don't think this is possible based on some research but find it hard to believe and do not understand why.
View 5 Replies
View Related
May 3, 2011
I just noticed Banshee is the new default player in Natty so I decided to move over my music and radio stations.The media import worked for my few mp3s (only have a couple on here) I have but my radio stations did not import. Since I mostly listen to the radio while on the computer (ipod when I am not), I bit the bullet and recreated all my radio stations by hand.
Most worked but a few of my favorites do not.BBC World Service did not work so I launched Rhythmbox since it is still installed and BBC and the other stations played fine.Searching around the net it looks like Banshee had problems with BBC before since it is an .asx type link but that was supposed to be fixed in one of the 1.x releases.I found Vermont Public Radio hosts BBC World in a different format but my other stations are out of luck unless I stick with RB for now.
View 2 Replies
View Related
Nov 11, 2010
some application to record to what I am listening on? This might be some program that can capture for example mms output or just capture what ever I listen to.
View 9 Replies
View Related
Feb 28, 2011
I'm looking to run an iptv station for my dorm. I know I can serve multicast so that's not a problem. The station will serve out podcasts and other cc licensed content. The target endpoint is xbmc- a media center. So far I know that I need to serve an rtp stream over udp that's streaming an mpeg-4 avc main or high profile with aac ( or ac3 ?) audio. I've had some luck using vlc with vlm to stream but it seems limited. What are my other options? Everything has to run on Linux- hopefully open source. How can I use playlists and not live streams? What are my software options?
View 1 Replies
View Related
Sep 28, 2010
any one will new how start firefox with command line with link for favorite radio station.I would use fot that firefox (but radio station can't be set as home page!!!)!I will be use URL...or evolution to start firefox, vlc or mplayer.
View 1 Replies
View Related
Jan 11, 2011
Using Rhythmbox to stream your music to multiple potential listeners over the Internet.But mostly, writing down how I did it so I don't have to re-do all the research the next time.StepsInstall icecast2: APT linkEdit /etc/icecast2/icecast.xml to configure your password at least. You need to add a user-specific password for the username that will be running Rhythmbox. For example, if your username is john you need to putQuote:<john-password>ChangeThisPassword</john-password>between the <authentication> </authentication> tags.I also suggest you set the port to 8000.Restart icecast2 using the following command:
Code:
sudo /etc/init.d/icecast2 restart
Download the attached script (shout2send.tar.gz) and extract it to
[code]....
View 3 Replies
View Related
Mar 11, 2011
I have a laptop with a broken lid, it is beyond repair so I want to make something out of it. I have unscrewed some screws and I have managed to swivel the screen around, so it looks like a tablet (screen over keyboard - not glued - yet!)I want to change this laptop thing into a News/Calendar/Weather station, that turns on automatically (I can set this in the BIOS) and start running. As I just mentioned, I want it to show News, My Calendar from Google Calendar, Weather and maybe my email. Heres a mock up of what I am thinking of -
Do you guys know any programs that would allow me to create this? The computer is running Windows XP and can be changed to Ubuntu if needed. Windows 7 is a no no (wireless driver is not compatible).
View 1 Replies
View Related
Jul 19, 2011
I'm having trouble getting audio from this particular radio station and have tried the gstreamer plugins, totem, VLC, win32codecs amongst others.Using Ubuntu 11.04 and Firefox 5.0
Radio Station: http:[url]....
It works fine on my Windows 7 PC and my Macbook Pro.
View 5 Replies
View Related
Jan 22, 2010
I find myself in unfamiliar territory. I am attempting to get a Dell M610 (in an M100e) running Ubuntu 9.1 64bit to talk to a Dell EMC Fibre Channel Array. The Dell has an Emulex card in it and it appears that the driver is loaded OK. What I am not sure on is what to do next! I have the SAN end configured but how do I get my LUN mounted on Ubuntu ?
View 1 Replies
View Related
Feb 2, 2009
is it possible to dock the navigator window in Openoffice with the editor window? it is distrubing when we use the navigator window and it hide most part of the editor window.it would be nice if it works like msword outline window.
View 1 Replies
View Related
Jun 17, 2011
I am using remote boot via PXE boot to an a remote machine. So okay, but when I load the files via NFS, I can not transfer the / lib to my station. I recompiled the kernel, which already influence all NFS packages built in this set as Obrigadao.
View 1 Replies
View Related
Dec 5, 2010
i want to play a specific radio station (which broadcasted on a specific website) on my website too,
so, what are the softwares that i should use for this situation ?? & how can i get that radio station be brodcasted on a box in my website page ??
i searched google, but i found alls talking about creating my own radio station, but thats isnt what i want, i only need to broadcast specific radio station (thats already exists) on my website
View 6 Replies
View Related
