Ubuntu :: Running Natty On A Dell Inspiron 6000 Under Dual Boot?
Jun 18, 2011
I am running Natty on a Dell Inspiron 6000 under dual boot. Now Ubuntu refuses to load. GRUB goes along to a point where the final message in both regular and recovery modes is 81.8921591 atal: SRST failed (errno=-16). Is there any way I can recover short of having a professional rescue my data from the hard disk and totally redoing the install. I have had this problem in previous versions but never fatally before. My computer works fine under Windows.
View 1 Replies
ADVERTISEMENT
Nov 2, 2010
I installed Ubuntu 10.10 on a Dell Inspiron 6000 but when I connect the ethernet cable the computer detects that the cable was connected but doesnt connect to the internet.
View 4 Replies
View Related
Jul 4, 2010
I just installed open suse 11.2 on a dell inspiron 6000 and i can not get the wifi card to work. Yast sees it, but that's about it. Ethernet works fine- hence the post.... any ideas? Model: intel pro wireless 2915abg calexico2.
View 1 Replies
View Related
Jul 24, 2011
I am still a noob with linux and debian in particular. I do some android development so through that I have learned a little bit about linux but only the basic command prompt commands and the basics of how linux works and such.Anyways, I was looking around on the forum and on other forums and I couldn't find any helpful information about how to set up wireless connections (such as wifi) on debian. When I installed debian on my computer it asked me for the ipw2200 files and I didn't have them at the time but now I have the latest framework files for that, I don't really know how to install them and after I install them I don't know how to turn on my wireless connections from there.
I am really sorry if someone already made a post on this subject and I am just too clutzy to find it, if that's the case please just post the link to that thread for me cause I'm dumb as crap.So basically the main problem I am trying to fix right now is that I cannot get my internet to work on my old dell inspiron 6000 laptop which I am trying to get to run debian.
View 3 Replies
View Related
May 21, 2010
I have a 4-5 year old dell inspiron 600m that i have been running on linux ubuntu for the past 2-3 years. Last week i took it apart to paint the casing, got that done and since I put it back together it has a tendency to become very hot. When i got it back together i also installed a good number of updates.
Also, I can no longer stream videos/ music from the internet. I am not sure if i messed something up when i was putting it back together, or if something in these updates has caused a problem. I have always been able to stream on previous installs, and i cannot honestly remember if i could before i took it apart. i am trying to watch a video on ..... and the cpu usage went clear to 100% and the cpu temperature went up to 99 Deg Celcius. The audio and video didnt even match but for a second or two at the very beginning. When the computer is sitting idle browsing the internet the cpu usage is very low, maybe avg. 15% and the temp drops to 55deg C fairly quickly.
View 4 Replies
View Related
Jan 10, 2010
I have a old Dell Inspiron Laptop I would like to use, but it dosent have awhole lot of memory 160megs worth and tried running the live cd of Ubuntu and Lubuntu and all i get on the screen is a blinking cursor. It give me the option to boot off the cd but that is where it stops.
View 3 Replies
View Related
Aug 5, 2011
I have got Windows XP Pro installed in my Laptop. It had 2 partitions. In C drive i have got Windows XP.Installed UBUNTU in E Drive. It did partiion E drive futher to install it. Had the GRUB RESCUE prompt initially. But after running the following got into the next problem.
Grub reinstall fix:
Boot Ubuntu live CD. Then run
sudo mount /dev/sdf5 /mnt
[code]....
View 9 Replies
View Related
Apr 15, 2010
I have bluetooth enabled in a Windows desktop Machine, which is connected to internet.
I would like to connect to internet through bluetooth available in my laptop which is running on CentOS 5.3.
I referred to many tutorials in internet, still couldn't configure bluetooth.
View 1 Replies
View Related
Jul 25, 2009
In the last week or 2 I've noticed something odd with the audio - but as I don't use the it very much and also accept all the ongoing updates from Fedora. Anyway symptoms are (using ALSA):
1. Volume control button on the laptop - when decreasing to less than ~50% the sound goes to zero.
2. Watching flash movies (in Firefox 3.5.1, Adobe 10 plug-in) (e.g. BBC, .....): they play fine for a few seconds then go choppy (audio and video) then video recovers but sound is lost (and the laptop volume control does not work at all after that).
3. Finding similar problems on replay of audio with kplayer and vlc on music files (ogg) that previously worked fine.
I've seen the pulseaudio and vlc fix thread but I don't use pulseaudio in kplayer, for example.
View 8 Replies
View Related
Mar 18, 2011
Now, all of a sudden, after I restarted after a system update, My dell desktop inspiron hangs on boot. The kernel is: 2.6.34.8-68.fc13.i686. Not only that, but the system won't boot for any of the remaining previous kernels.
View 6 Replies
View Related
Jan 22, 2010
I have an old laptop, and am a basic linux user, but this install is crazy. I know that I have to have acpi=off to work, and got Linux Mint 7 installed from the live cd but want Xubuntu. The Xubuntu 9.1 live CD works fine as long as I put the acpi=off parameters in the boot string, and I check the additional options just to be sure. But after install I cannot even get into the grub, it says grub loading for a split second then blinking cursor
View 2 Replies
View Related
May 20, 2010
Has anyone got Ubuntu 10.04 working on their Dell Inspiron 1100? Most of the time, the screen goes black a short time after boot. Sometimes it goes black right after the splash screen, sometimes I get to log in and then it goes black a little later. Same results when trying to boot into "safe graphics" mode. Ubuntu 7.10 works fine on this machine (although I had to do some special configuration in xorg.conf to get it to work way back when I installed it.) However, it does not appear to be possible to manually configure X in 10.04. I tried disabling the splash screen in grub based on suggestions I found for other Ubuntu versions, but that had no effect on the problem.
Is it possible to replace X with the most recent version that could still be manually configured? Would anyone know how to go about doing that?
Alternatively, if it's impossible to get this old machine to run new versions of Ubuntu, has anyone had success with (relatively) new versions of other distros on it?
View 9 Replies
View Related
May 24, 2010
This card has been the bane of my existence for a while. In the old days I could get it to work with Fedora using a generic video driver. A friend recommended OpenSuse because of my love for KDE.
The good news is that install went greeeeat. But after that, I once again got a black screen with a line randomly done it. Is there a way to change? I tried changing those resolution options but it didn't work. I have the Windoze driver from Dell's site. Its Dell Inspiron 5160.
View 8 Replies
View Related
Apr 29, 2011
Dual Boot Gone Bad I have been trying to set up a dual boot laptop on an old Dell Inspiron 2600. I got the machine cheap, and it is in excellent condition. I have upgraded the Bios to A11 (it was A4 when I got it) and put in a 40 Gig HD. It is maxed-out in memory at 360 Mb. It has the awful (by today's standards) Intel i810 video mess. I created an NTFS (primary) partition on the first half of the drive and installed XP, updated through SP3. I then attempted to install Debian 6 (squeeze) on the second half. I was unable to get anywhere with an installation using a squeeze Live CD. The screen just goes blank about 60 seconds into the installation, and everything freezes up. In rescue mode, I can get some screen play, but the rendering is awful and half of what you do is actually off the screen and you can't see what it is you are doing.
I hooked up a separate monitor, and was able to watch the installation just fine until it reached a certain point in the boot-up, then everything again went blank and the machine again froze up. I tried Ubuntu 10.10, Ubuntu 10.04 LTS, Mint 10, and Ultimate Edition 10.10 with varying degrees of success, but none completing and working.
The Ubuntu 10.04 LTS actually installed, but I could not get sufficient graphics in either a terminal (entered at the end of the install process just before re-booting) or booting to text only mode to sudo a change to the xorg.conf file that was native to the system, rather than to the installation package itself (which goes away when you reboot).
I was able to install 'squeeze' using the 'expert graphical install' mode under 'advanced options' (it lets you select a screen resolution when it starts the install), and when I got to the end of the installation, before re-booting, I told the system to open a monitor as 'root', and wrote what I thought would have been an appropriate xorg.conf file in the /etc/X11 subdirectory using nano (monitor and driver specs, as well as suggested xorg.conf entries obtained elsewhere on the web).
[Code]...
I'M SO CLOSE! Can somebody help me and tell me how to edit GRUB so it again recognizes the partition... or reinstall GRUB.... or let me know if the problem is with the XP MBR.... And if so, maybe hopefully lead me to how to fix THAT issue without screwing up the Debian install (I know this isn't an "UGH"- Windows forum). If worst come to worst, I can delete all the Linux partitions, use my Windows install disk to repair the MBR, and reinstall lenny.... Hopefully with GRUB not losing XP this time. I hate to do it because it has taken me a couple of days to get ANY form of Linux actually working right on this machine..... but at least I know how to do it now and what distro will actually work.
Also, anybody with a clue as to why squeeze won't boot after what appears to be a successful installation (with the above-listed xorg.conf file in place) and what I can do to fix that issue would also be appreciated. It will be nice to have a system installed that has current support next year.
View 6 Replies
View Related
Feb 26, 2011
I was successful in getting the ATI catalyst software to set the displays to maximum resolution. The second display is dark. It shows a white "X" cursor if I move the mouse to the second screen. The KDE desktop configuration manager does not recognize the second monitor.
Here is the output of: cat /etc/X11/xorg.conf
Section "ServerLayout"
Identifier "aticonfig Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
Screen "aticonfig-Screen[0]-1" 1920 0
[Code].....
View 9 Replies
View Related
May 18, 2011
Howdy, I just installed a dual boot on my Acer Aspire One and it runs great. I was wondering is there anyway to access the files from either side? If so I can't see the XP file system from the Ubuntu system.
View 9 Replies
View Related
May 29, 2011
I've been trying to properly install grub for the past 3 days and failing every time.I recently bought a new computer and would like to dual boot Windows 7 64 and Natty. On my previous machines, ubuntu installer has automatically detected windows. It does not do so on this machine.I have three hard drives: 2 ssd's and a single 3 tb drive for storage.
I would like one ssd for windows 7 and one for natty.Currently, I am able to boot into both OS's but only by altering the boot sequence of the drives from the bios. I am hesitant to install grub to the windows drive for fear I will lose the ability to boot into windows. I did this early in the discovery process and ended up having to reinstall windows.
View 9 Replies
View Related
Jul 11, 2011
I know it is possible to move the ubuntu home directory but what is the best way to move it safely to an NTFS partition that already has valuable data in?
View 8 Replies
View Related
May 19, 2010
I've been allocated a Dell Latitute 5400 laptop. Initially it was installed with Windows XP Service Pack 3. Next I repartition every thing using gpart.
Next I install Centos 5.3
during the installation process, I choose windows xp as my default system since my work place works in Windows XP.
but real problem is after installing Centos 5.3 I'm not able to choose which OS to boot.
I've refer to [URL]
but after I go into linux rescue
what I found is that lilo is not installed.
ls -lrth /sbin/lilo
neither is there any presence of /etc/lilo.conf
how am I going to resolve this issue so that I have a chance to choose which OS I can boot into?
View 7 Replies
View Related
Aug 24, 2011
Partition limit is 4 on my Inspiron 1525 so even with the space available I cannot create a Fedora partition because:
50MB for Dell Diagnostics
**GB main vista partition
10GB recovery partition
2.5GB MediaDirect partition
I'm trying to dual boot vista/fedora. I know I can delete the MediaDirect partition but that causes boot problems if the button is pressed while the power is off. I'm not sure which of the 3 Dell Partitions to remove.
View 2 Replies
View Related
Aug 18, 2010
I am not able to adjust the brightness in ubuntu. I am using gnome and ubuntu 10.04. I can see some folders DD01, DD02 in /proc/acpi/video/GFX0/ with value as given below. cat /proc/acpi/video/GFX0/DD01/brightness <not supported>
View 5 Replies
View Related
Feb 5, 2011
i want to install ubuntu in my dell..ive already installed one in my desktop can i use that installer to my dell mini inspiron 10?? i have a usb hard drive..or better to use usb stick? well what about blackbuntu? seems awesome can i install that in my dell?
View 5 Replies
View Related
Apr 28, 2011
i just installed version 11.04 on a dell inspiron 8100 the install went perfect up to the point where it asks me to restart. once i restarted i can not see the desktop.
dell inspiron 8100 20GB HDD, 512MB RAM, Pentium III.
View 9 Replies
View Related
Jun 9, 2011
This computer has the ATI Radeon HD 4250 which wont run unity apparently. It runs in classic mode without effects, it also runs on unity 2D. How can I get it to default to Unity 2D so that my girlfriend doesn't have to select it each time?
View 2 Replies
View Related
Jun 4, 2009
I got a Dell Studio 1555 preinstalled with Vista and it already had 3 Primary Partitions. I needed to install Fedora Core 9 on this machine and to organize my HDD(500 GB)
I had two options:
1) Either to create a fourth primary partition
2) Create an extended partition with a number of logical partitions
I chose the option 2. I want to know if i make some free space by deleting one of the logical partitions, can that free space be used for installing Fedora ?
Also how to proceed with the installation?
View 4 Replies
View Related
Apr 2, 2010
i was just wondering if anyone could help me with my webcam. I'm unsure if it was detected during the instalation and do not know how to turn it on if it was.
View 5 Replies
View Related
Apr 4, 2010
How to fix window lay out of GIMP in Dell Inspiron mini. Because every time I open GIMP the layout change and difficult to work ?I found GIMP -2.6.8 version how can I install this version to my computer. Since, I have some problems when using gimp-2.4.5.
View 2 Replies
View Related
Apr 7, 2010
I am trying to install ubuntu 9.10 to Dell Inspiron 14". It got stuck after first step. Configuration of my laptop is as follow intel core i3 processor, 4GB DDR3 RAMm (does it support for above config.?) i am having windows 7 ultimate as an operating System right now and i am new at ubuntu
View 3 Replies
View Related
Apr 23, 2010
In a previous thread I stated that I had updated my old dell's nvidia drivers only to receive a blank screen (of deadly doom) in return. Now however I would like to try and install them again, but this time not through the hardware drivers app. Where do I do this and which drivers should I get. My google searches has failed me.
View 5 Replies
View Related
May 1, 2010
I just bought a basic Dell Inspiron 570 Desktop, and installed Ubuntu 9.10, and found that the wired internet won't connect. I've checked the wire, and confirmed that an Ubuntu laptop can get a wired connection using it, but the new Inspiron doesn't do anything.
The "Network Connections" dialog shows a "Wired connection 1" item, but Network Manager refuses to connect to it. ifconfig only shows the lo interface.
How can I get this wired interface working? Please, this is very frustrating. I can only assume it's some sort of driver issue (which seems rare with the wired connection), but I can't even run an update since I don't have an internet connection.
View 8 Replies
View Related
