Ubuntu Multimedia :: No Sound When Attached To Docking Station?
Mar 24, 2011
I have been using Linux and Ubuntu only since the last two months on my (2006) Sony Vaio VGN A617S laptop which is going pretty well on Ubuntu 10.10. When installing Ubuntu audio did get installed alright, and the speakers on the laptop itself are working well even now with the right drivers (snd-hda-intel) for the Realtek ALC260 soundcard.
My problem is when laptop is docked to the A/V docking station (I have seen it referred as a port replicator as well - the model number is VGP-PRAV2), with its two external speakers. And these were not on when Ubuntu was being installed. What is interesting is the headphones jack on the laptop does work when the docking station does not. I have been trying hard and have already tried quite a few things I saw to be related issues, like:
a) adjustments to some IEC958 in alsamixer
b) using a custom mod for the ALC260 card
View 6 Replies
ADVERTISEMENT
Mar 24, 2011
I have been using Linux and Ubuntu only since the last two months on my (2006) Sony Vaio VGN A617S laptop which is going pretty well on Ubuntu 10.10. When installing Ubuntu audio did get installed alright, and the speakers on the laptop itself are working well even now with the right drivers (snd-hda-intel) for the Realtek ALC260 soundcard.
My problem is when laptop is docked to the A/V docking station (I have seen it referred as a port replicator as well - the model number is VGP-PRAV2), with its two external speakers. And these were not on when Ubuntu was being installed. What is interesting is the headphones jack on the laptop does work when the docking station does not.
I have been trying hard and have already tried quite a few things I saw to be related issues, like:
a) adjustments to some IEC958 in alsamixer
b) using a custom mod for the ALC260 card
View 1 Replies
View Related
Feb 21, 2011
I have HP Compaq 6530b laptop running Debian Wheezy AMD64. I have a docking station with a monitor supporting 1680x1050 resolution and the laptop monitor with 1440x900. The video is integrated Intel mobile series 4.Both monitors are identified and working OK. When I use the laptop monitor standalone it runs at the native resolution. When connected to the docking station I can choose dual monitors with both using their native resolutions and the desktop spread on both of them (with the laptop monitor being primary and containing the taskbar and icons). If I choose to mirror the display it sets itself to a lower resolution of 1280x1024 that is supported by both monitors.
The problem is that I want to use one monitor at a time. If I close the lid of the laptop it turns off both monitors instead of using the docking station. When the lid is closed I want the bigger docking station monitor to be primary and working at native resolution and if I open the laptop or remove the laptop from the docking station to use the laptop monitor at it's native resolution.I had Debian Lenny I386 before and it was operating as expected but I made a clean install of Wheezy amd64 and I don't know how to configure it.I don't have xorg.conf file so I don't know where it takes the settings from.
View 3 Replies
View Related
Jun 6, 2011
I recently upgraded to Natty (11.04). Looks great but: I can't use it when my laptop (dell latitude E6410) is plugged in my dell docking station. It seems like the attached monitor (DVI) does not get signal input and hence turn to sleep mode.I can say that Ubuntu is still running fine when I unplug it from the docking station.I am using the NVidia driver 270.41.06 (installed as a third party driver by the install process).I can successfully connect and configure an external monitor thru the VGA port.
View 1 Replies
View Related
Jan 9, 2016
Recently (in 2015) our Debian systems started not to recognize HDDs connected via an external docking station.
On my computer I run: (uname -a)
* Linux violin 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt9-3~deb8u1 (2015-04-24) x86_64 GNU/Linux
* If I connect to a flashdrive to the USB2 port, it is recognized as sd* (messages are also written to dmesg/syslog)
* If I connect the USB3 connector of the external docking station with an 1TB WD SATA docked, to this USB2 port (the external docking station has its own power supply, so I do not expect to have a problem with the current, the drive spins up and is spinning), there is nothing in the dmesg/syslog, and no new items under /dev/sd* or lsusb or similar tools.
* If I connect the same external docking station with the same disk via eSATA on a different computer it is recognized. That computer runs the same debian. If I connect through its USB2 port it does not work either.
* I also tried another docking station and USB cable.
View 7 Replies
View Related
Aug 6, 2015
While using Debian Jessie with Gnome 3 and Nautilus file manager, my Startech HDD docking station will not auto mount and can only be mounted using commandline while in root. Previous GNU/Linux distros, such as Ubuntu 14.04, this device auto mounted without issue. All other devices, such as USB HDD, and USB pen drives, auto mount without any problems.
"Initailize Startech device with a 120GB 2.5" SATA HDD Fujitsu drive"
udev creates two block devices
Code: Select all begins with:
brw------- 1 root root 8, 64 Aug 6 10:11 /dev/sde
brw------- 1 root root 8, 65 Aug 6 10:12 /dev/sde1
changes to:
brw------- 1 root root 8, 64 Aug 6 10:11 /dev/sde
brw-rw---- 1 root disk 8, 65 Aug 6 10:12 /dev/sde1
dmesg produces the following results:
Code: Select all[ 179.127724] scsi 6:0:0:0: Direct-Access FUJITSU MHW2120BJ G2 0000 PQ: 0 ANSI: 2 CCS
[ 179.128513] sd 6:0:0:0: Attached scsi generic sg5 type 0
[ 179.129393] sd 6:0:0:0: [sde] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 179.130379] sd 6:0:0:0: [sde] Write Protect is off
[ 179.130388] sd 6:0:0:0: [sde] Mode Sense: 28 00 00 00
[ 179.131903] sd 6:0:0:0: [sde] No Caching mode page found
[Code] ....
Between the thirty second and the fifteen second wait, the block device "/dev/sde1" receives the "disk" group and read/write attributes, however, the drive is still not auto mounted and can only be manually mounted via root. The block device "/dev/sde" remains with the "root" group and read/write attributes are accessible for "root" user only.
How to correct this issue to allow auto mounting?
View 1 Replies
View Related
Nov 11, 2010
I use a Dell advanced port replicator at home and in the office. Each is connected to a second monitor. In neither place does the monitor actually receive a signal even though the monitor seems to be detected correctly in display settings. The function-F8 key does not have any visible effect.
Oh, almost forgot. At work once when I preparing to shut down the second monitor popped on for a few seconds though it was at the wrong resolution.
View 6 Replies
View Related
Aug 26, 2011
I want to "build" a new backup solution for my home LAN. I have 3 openSUSE machines at various versions and 1 File Server with openSUSE 11.4.My plan is to plug a eSATA or USB3 docking station on the file server and then take backups from the clients either via rsync or Amanda.Since the backup will not be a daily activity, I would like to have the option to run the backup during night, and automatically, BUT, without any action from my part. So, I would like to attach a large external HDD on the machine and then:Power on the docking station/HDD.Perform the backup from the Amanda Server or rsync scripts.Power off the docking station/HDD.Do you know any docking station that has a "linux" power management?If not, how do I power up/power down from console an eSATA or USB HDD?
View 2 Replies
View Related
May 18, 2011
I have a Dell E6250 for work and a docking station with dual DVI going to two Dell 1908FPc. It looks like I can only configure two monitors and after I enable dual head support, X11 crashes. I can use Function+F8 to switch between them, but I cannot figure out how to get both monitors on at once. i.e. I close the lid of the laptop to use the dual monitors.
[Code]....
View 1 Replies
View Related
Aug 25, 2010
I have an HP EliteBook 8540p laptop with associated docking station. It is running Ubuntu 10.04. Until now I have been successfully running TwinView with the nvidia-195.36.24 drivers - using the built-in LCD screen and an external LCD monitor, connected via an analog VGA cable.I've changed the screen over to a larger resolution Philips LCD, and it works fine over VGA.
However the image is not as sharp as I'm used to with other monitors, so I'm trying to get it working over the DVI port on the laptop docking station.However I have been quite unsuccessful in getting a picture to appear on the external monitor - Xorg is able to read the EDID information from the monitor, and according to Xorg.0.log has absolutely no problems with finding a valid mode and choosing this monitor as "DFP-1", alongside "DFP-0" (laptop display). But no matter what I do I can't get a picture. Xorg.0.log has no errors.
I have unsuccessfully tried: various combinations of xorg.conf options to set "ConnectedMonitor", "CustomEDID" with a EDID .bin downloaded over VGA, etc.a colleague has the exact same laptop and monitor, and has it running fine. However using his xorg.conf still produces no picture.nvidia-settings - tried lots of things a different DVI-connected monitorIt's as if the DVI port is fully functional in every way but its output is somehow disabled. I've also tried other monitors, they don't work either, yet do with a VGA cable.
EDIT: I have checked the DVI cable anything else in terms of enabling a DVI port.
View 1 Replies
View Related
Aug 4, 2011
I have an X-Station 25 synth, which has worked fine in the past on Ubuntu. Recently made a fresh install on Xubuntu, and for whatever reason, I'm getting no sound coming out when I just select USB audio.If I go into Sound Preferences, I can see the device. I can even select it for sound input. Hell, if I press some keys on the keyboard, I can see some of the squares on the input level go green.Evidently, there IS sound coming in via the USB connection, and Audacity is capable of recording it.
However, the only way of hearing it is by putting headphones directly into the unit and listening to the monitor output signal. The audio coming in, as detected, is not being played from my laptop speakers/headphones.Am I just missing something here, and that's MEANT to be the only way to hear the audio out?In alsamixer, there are no controls for the Xstation, and nothing seems to be muted. I've upgraded the firmware to the most recent version as well.
View 2 Replies
View Related
Feb 27, 2010
I want to stream a radio station that uses .cfm . I've tried a lot of options but without success. Anyone have experience with cfm?
I can stream other stations using vlc media player and even Adobe flash player. But no success with this cfm stream.
View 2 Replies
View Related
Oct 18, 2010
Anyone know how I can play a .wax radio station on ubuntu. The link I have is:URL...I don't think this is possible based on some research but find it hard to believe and do not understand why.
View 5 Replies
View Related
May 3, 2011
I just noticed Banshee is the new default player in Natty so I decided to move over my music and radio stations.The media import worked for my few mp3s (only have a couple on here) I have but my radio stations did not import. Since I mostly listen to the radio while on the computer (ipod when I am not), I bit the bullet and recreated all my radio stations by hand.
Most worked but a few of my favorites do not.BBC World Service did not work so I launched Rhythmbox since it is still installed and BBC and the other stations played fine.Searching around the net it looks like Banshee had problems with BBC before since it is an .asx type link but that was supposed to be fixed in one of the 1.x releases.I found Vermont Public Radio hosts BBC World in a different format but my other stations are out of luck unless I stick with RB for now.
View 2 Replies
View Related
Jan 11, 2011
Using Rhythmbox to stream your music to multiple potential listeners over the Internet.But mostly, writing down how I did it so I don't have to re-do all the research the next time.StepsInstall icecast2: APT linkEdit /etc/icecast2/icecast.xml to configure your password at least. You need to add a user-specific password for the username that will be running Rhythmbox. For example, if your username is john you need to putQuote:<john-password>ChangeThisPassword</john-password>between the <authentication> </authentication> tags.I also suggest you set the port to 8000.Restart icecast2 using the following command:
Code:
sudo /etc/init.d/icecast2 restart
Download the attached script (shout2send.tar.gz) and extract it to
[code]....
View 3 Replies
View Related
Jul 19, 2011
I'm having trouble getting audio from this particular radio station and have tried the gstreamer plugins, totem, VLC, win32codecs amongst others.Using Ubuntu 11.04 and Firefox 5.0
Radio Station: http:[url]....
It works fine on my Windows 7 PC and my Macbook Pro.
View 5 Replies
View Related
Apr 30, 2010
I have an Ubuntu Linux 10.04 installation which I would like to use via remote desktop. Everything works perfectly if I start the computer with a monitor attached. If I do not, X fails to start because it cannot find any screens.
How can I force X to start up without a monitor attached?
View 9 Replies
View Related
Mar 3, 2010
It has no monitor attached, I'm accessing it graphically through vnc4server.It has no graphics card, and I want to get OpenGL to work on it, using software rendering.Right now, when I try to run glxgears, I get this.
Code:
Xlib: extension "GLX" missing on display ":1.0".
Error: couldn't get an RGB, Double-buffered visual
View 1 Replies
View Related
Jul 9, 2010
I want to display cpu temperature and fan speed, network activities, load, etc on a simple window mangement, such as fvwm, wm, or blackbox. Is there a software in slackware packages to show these sensors reading in X windows similar to wmsupermon? I don't want to compile it, if slackware has something same that i can just use.
View 1 Replies
View Related
Jan 3, 2010
I am unable to hear any sound at all using my M-audio delta 44 soundcard (which works fine in Windows - Dual boot).how I can get this working?
View 4 Replies
View Related
Dec 20, 2010
I have been using Ubuntu as my main OS on my desktops for a couple of years now. Started off with a HP with a Creative Labs XiFi soundcard, but am now using a Dell with a Creative Labs Audigy. Sound worked perfectly on the Dell since a clean install (about 7 months ago). I turned it on a week or so ago, and no sound! Even the little sound indicator in the notification area has gone.
View 8 Replies
View Related
Jun 7, 2011
After installing I was not able to get many of the audio programmes to work. After some reading, I realised that this was probably due to jack not starting.
I was unable to get jack to start normally but have been able to get it started with the playback only option selected. Programmes that use jack now work, however there is no sound once jack has been started. The sound does work in other programs when jack is not started. Strangely, I only have to open qjackctl for the sound to stop, and jack is not even started. Initially I thought these problems were due to my sound card not being supported, but I believe that alsa support was added for the via 1708 codec at some point. I found that support had been added in a document showing the changes between alsa versions; however I cannot find the exact model listed as a supported sound card on the alsa site.
I believe that altering jack settings could fix the problem, as i have been able to get audio to work in hydrogen by selecting plughw:0 but there is still no sound in other programs. I have tried altering many other settings but to no avail, however I do not really understand the meaning of the settings that i am adjusting.
Does anyone know what settings to adjust or know something else that might fix this problem so that sound works once jack has been started?
Also, would programmes that use jack such as audacity, hydrogen, and ardour work with pulseaudio as the main sound server if I were to install normal ubuntu - it might be worth seeing if my soundcard works with the puleaudio sound server
if this helps, here is the error message received when jack does not start when the normal duplex option is selected.
21:24:04.867 Patchbay deactivated.
21:24:04.868 Statistics reset.
21:24:04.886 ALSA connection change.
Cannot connect to server socket err = Connection refused
[Code].....
also, when i open alsamixer in the terminal for some reason the headphone part is greyed out, even when the sound is working before qjackctl is opened.
View 4 Replies
View Related
May 1, 2010
I've got a custom compiled kernel, just built on Lucid 10.04 from the kernel sources.System works fine, except for sound.When I log in as normal user and try to play a wav file using.The sound file is being played, but I hear no sound.However, when I do "sudo -s" and become root, execute the same mplayer command then I can hear the sound.My Sound preferences shows no input device and only "Dummy Output" as output device.On the generic kernel as came with the Lucid 10.04 CD, sound preferences shows different devices.The strange thing is: when I compiled my custom kernel, I changed nothing to the sound options in the kernel config file.
View 6 Replies
View Related
Jun 10, 2010
I have no sound, is it possible to restore the default sound drivers/settings in 10.04?It was work well before except for one issue, I couldn't get mic in for Rosetta Stone using wine. I have followed so many howto's to try and get Rosetta Stone working and then my sound working again.I think this is my main problem I upgraded alsa to "alsa-driver-1.0.23". I could easily be wrong about that assumption though.I have a Dell XPS M1210Ubuntu 10.04 64bitI think this is my sound card, "lspci -v | less"00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)Subsystem: Dell Device 01d7Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at efffc000 (64-bit, non-prefetchable) [size=16K]Capabilities: <access denied> Kernel modules: snd-hda-intelBut I don't think it is being recognized,
$ aplay -l
aplay: device_list:223: no soundcards found...
$ arecord -l
[code]....
View 1 Replies
View Related
Nov 29, 2010
For a couple of days ago, maybe a week or two I beguinne to get a 'snap-sound' in my compurt sound, like an eletrick charge or someting. I comes with about a minutes period. I resently find out that it came from the center-speaker. I run Ubuntu 10.04 LTS and have this sound-card: 00:09.0 Audio device: nVidia Corporation MCP73 High Definition Audio (rev a1)
My speaker system is Logitech X-530 I have located the problem to center-speaker, but the snap-sound only disappear if I mute the center, not lower the input, in the GNOME ALSA Mixer. I have tried to disconnect the antenna to the analoge-TV-tuner. Has anyoe a similar problem, and a trick to fix it? I don't know if it's related to any recent update of the system?
View 1 Replies
View Related
Dec 14, 2010
Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
View 6 Replies
View Related
May 8, 2011
I have a fresh install of Natty and i'm having some issues getting sound to work. My laptop has a built in sound card which works just fine. However, i also have a usb 5.1 sound card which isn't working at all. Both devices show up in 'Sound Preferences' but when i select the 5.1 device as the output device sound doesnt work. I ran the alsa-info.sh script and the output can be found here.
View 4 Replies
View Related
Aug 9, 2011
I am setting up a mythtv/xmbc box on Ubuntu 10.10 (natty does not install on my hardware). I have a Sabrent TV PCIRC tuner card, which seems to work fine with the proper card and tuner settings. My on-board sound is HDA-Intel surround sound, which I have configured as analog duplex.
Currently the sound works fine through my speakers plugged into any jack on the back of the PC (two speakers, one jack). I can watch ripped movies and listen to music. The TV tuner is pumping sound from its external jack -- if I hook it up directly to the speakers it works fine. I can feed the Tuner's sound to the line-in on my motherboard, but nothing comes out. In the sound manager, i have the input device selected and the input level shows that the sound is coming in through the connector, and I can test the speakers and they work fine, but they don't seem to be communicating that the sound coming in needs to be pumped out through the speakers.
View 2 Replies
View Related
Jun 21, 2010
I am using a USB headset and a logitech QuickCam Pro 4000 with Ubuntu 10.04
1. When I change the sound to internal sound the webcam works in Skype but I have not sound.
2. When I change the sound to the USB headset (sound output) the webcam does not work in Skype.
View 3 Replies
View Related
Nov 6, 2010
I have installed xubuntu version 10. My sound card is a Yamaha dS-1S, and seems to be properly configured. Alsa mixer doesn't indicates any error. However, I can't manage to get any sound. I have checked that jacks are correctly plugged.
View 4 Replies
View Related
