General :: Run A Small IPTV Station?
Feb 28, 2011
I'm looking to run an iptv station for my dorm. I know I can serve multicast so that's not a problem. The station will serve out podcasts and other cc licensed content. The target endpoint is xbmc- a media center. So far I know that I need to serve an rtp stream over udp that's streaming an mpeg-4 avc main or high profile with aac ( or ac3 ?) audio. I've had some luck using vlc with vlm to stream but it seems limited. What are my other options? Everything has to run on Linux- hopefully open source. How can I use playlists and not live streams? What are my software options?
View 1 Replies
ADVERTISEMENT
Nov 16, 2010
I've searched a lot across the web and this forum in particular, but wasn't able to find the solution. The settings of the firewall are too cryptic to me. When the firewall is turned off everything is OK, but it is uncomfortable to turn it on and off every time I watch IPTV.
View 8 Replies
View Related
Jan 23, 2011
I got a server setup with three nics
eth0 = wan
eth1 = lan
eth2 = iptv (multicast)
When I have my IPTV inserted in the computer I am either having problems connecting to the internet or recieve the multicast streams from the iptv. I do get a valid ip on both the WAN and IPTV, but I am having problems getting them both to work at the same time.
eth0:
eth0 Link encap:Ethernet HWaddr 00:14:d1:1d:72:39
inet addr:94.xx.xx.63 Bcast:255.255.255.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2180753 errors:0 dropped:0 overruns:0 frame:0
[Code]...
View 1 Replies
View Related
Mar 16, 2011
Wanting to experiment with Linux. Would like a free or inexpensive version on CD or DVD. Would like source code to be included.
View 4 Replies
View Related
Jan 5, 2010
This is not exactly Ubuntu question but i don't know where else to ask. I'm trying to setup a Wireless Linux router. My ISP provides multicast IPTV. I've got the whole thing setup'ed with igmpproxy and hostpad. On wired connection IPTV works flawlessly, but on wireless connection IPTV glitches badly and router start to time out. My wireless card is DWA-552 I'm using ath9k driver. More info in my post on LinuxQuestions.org Did anyone tried to setup Wireless Router with IPTV?
View 3 Replies
View Related
Aug 25, 2010
I have an HP EliteBook 8540p laptop with associated docking station. It is running Ubuntu 10.04. Until now I have been successfully running TwinView with the nvidia-195.36.24 drivers - using the built-in LCD screen and an external LCD monitor, connected via an analog VGA cable.I've changed the screen over to a larger resolution Philips LCD, and it works fine over VGA.
However the image is not as sharp as I'm used to with other monitors, so I'm trying to get it working over the DVI port on the laptop docking station.However I have been quite unsuccessful in getting a picture to appear on the external monitor - Xorg is able to read the EDID information from the monitor, and according to Xorg.0.log has absolutely no problems with finding a valid mode and choosing this monitor as "DFP-1", alongside "DFP-0" (laptop display). But no matter what I do I can't get a picture. Xorg.0.log has no errors.
I have unsuccessfully tried: various combinations of xorg.conf options to set "ConnectedMonitor", "CustomEDID" with a EDID .bin downloaded over VGA, etc.a colleague has the exact same laptop and monitor, and has it running fine. However using his xorg.conf still produces no picture.nvidia-settings - tried lots of things a different DVI-connected monitorIt's as if the DVI port is fully functional in every way but its output is somehow disabled. I've also tried other monitors, they don't work either, yet do with a VGA cable.
EDIT: I have checked the DVI cable anything else in terms of enabling a DVI port.
View 1 Replies
View Related
Aug 11, 2011
I want to build some small soft wares in linux .
Example there is OS called ttylinux [URL] it supports only few packages , example it doesn't support GCC compiler etc .. So I want built this packages to the os and create a final image out of it .
View 4 Replies
View Related
Apr 28, 2011
I have /var set to 2.5G which I have not had a problem with until now.
I cant compile openoffice because /var runs out of space when I do so. On Gentoo /var is used to compile.
can I set a different perameter to compile openoffice(emerge oppenoffice) to have just this program compile in another location?
View 4 Replies
View Related
Feb 18, 2011
I have a netbook with a maximum screen resolution of 1024x600. I'm running a dualboot Ubuntu10.10 & Backtrack4r2, and I'm having some trouble with windows whose "height" was larger than 600px. Buttons end up below the screen, and I can't click 'Ok' or 'Cancel' or 'Apply'.
When my OS was still Windows7, I didn't have any problems because I can resize all of the windows that I use. Most of windows in linux (esp. in KDE settings), the windows has a fixed height.
Is there any workarounds to my problem?
View 3 Replies
View Related
Jan 25, 2009
I love the look of FreeNAS, but it does'nt do print server!
Must Have:
Run off a USB Flash Drive
File share with Windows (I want to backup to it)
Be a print server to a laser printer (USB interface)
Be remotely controlled once it is setup(don't have a spare screen and it's going in a spare room/corner BUT I will need to use a GUI for setup)
Free (thats why I won't use Windows)
Run OK on a P3
Preferred:
Power management
Wireless adapter compatible
View 2 Replies
View Related
Feb 14, 2010
today I decided to try and install Damn Small Linux 4.4.10 on a very old laptop. Unfortunately once installed, it refused to load the operating system. I am able to run DSL when I load it to RAM, but I am unable to install it to my harddrive correctly? The system on which I am trying to install it on is a Toshiba Tecra 550CDT.
View 3 Replies
View Related
Jan 14, 2010
Should the swap file be as large as possible or as small as possible providing a person has 8GB of installed ram.
View 14 Replies
View Related
Dec 10, 2010
kernel 2.6.21.5, GNU (slackware 12.0)I have entered sourceforge.net. The fonts in their pages I find I cannot change their size. Neither ^+ (cntl++) has any effect. And the resolution I have it (/etc/X11/xorg.conf) at 640x480 (in this way I have a really big screen; so, big characters). I can't almost read that tiny characters.
View 2 Replies
View Related
Apr 8, 2010
I'm setting up (have set up) Ubuntu after installing W7, everything working great - then realized that I have made the W7 partition too small. Nothing new installed yet, is it possible now to resize/enlarge that partition, without re-installing?
View 13 Replies
View Related
Aug 4, 2010
how to make my icon a bit smaller? Default icons seems to be too big for me.
View 3 Replies
View Related
Nov 11, 2010
some application to record to what I am listening on? This might be some program that can capture for example mms output or just capture what ever I listen to.
View 9 Replies
View Related
Mar 31, 2010
The radio station is located here
Click Here:
Then click to listen
But when it comes up there it does not play for some reason.
It was working fine with ubuntu 8.10 no problem at all.
What did I do wrong here ?
View 9 Replies
View Related
May 2, 2010
I have installed "Damn Small Linux" on my home computer for doing C development in unix. But the distribution doesn't by default come with the C development environment and I am facing some issues when trying to install the gcc.Is there any other small Linux distribution which by default has the required packages for the C development. And also I don't want additional software which takes up lot of space but still would like to have the graphical environment.
View 6 Replies
View Related
Jun 6, 2010
I'm pensioning off my 10-years-old home server and replacing it with an Ubuntu 10.04 box. The two storage devices are a Western Digital Caviar Green 2.0TB HD and an Intel X25-M 34nm Gen 2 80GB SATA II 2.5inch SSD (the box has 8GB RAM and an i5 750, if it matters).
I don't care much about boot times (since I don't plan to reboot all that often;-); the main frequent, performance-demanding task will be (re)building large open source C or C++ software packages from sources (as an open source contributor, I do that often).
So, I thought I'd keep the SSD as the secondary drive and the HD as the primary one, using the SSD mostly for the files that can otherwise demand a lot of seeking (esp. in a parallel make).
However, the friendly vendor (perhaps more experienced in Windows systems than in Linux ones) thinks the "normal" way to configure the machine would be with the SSD as the primary drive. I'm pretty rusty on configuring and tuning systems, so, I thought I'd better double check on SuperUser.
View 2 Replies
View Related
Jan 15, 2010
hi: I just installed damn small linux on a Dell 233 Pentium w/ Toshiba CD-ROM XM 6102B, it works fine except for mounting CD's & Floppies (and I assume, although I haven't tried USB-Drives)
when logged in as root, and typing in
mount dev/cdrom
w/ a cd in a the drive
the answer is
no medium found
when using X mount floppy command,
w/ a floppy in the drive, I get:
Error: mount: relocation error: mount: undefined symbol: blkid_known_fstype
also, my cd-rom drive won't stay closed, which is really annoying,
View 14 Replies
View Related
Feb 23, 2011
I am would like to learn how to keep my system clean of unneeded and unwanted file clutter as I am trying to get the most out of my older home built pc. I am running fatdog64 puppy linux off of a usb stick right now, but I would like to have a small standards based setup on my hard drive to use as a base to build a custom kernel for my pc. I sure miss my old GEM desktop
View 1 Replies
View Related
Oct 12, 2009
When I try to design a small filesystem, it always have the Segmentation fault.#: make makefile
Format will erase all context on the disk. Are You Sure? y
Program received signal SIGSEGV, Segmentation fault.
The question is,I cann't find the fseek.c anywhere,so I cann't solve the problem,can you help me?thanks very much.I think I should try my best to find the error in the code,code is too long,so the question i describe is not in detail.
View 3 Replies
View Related
Dec 9, 2010
I installed "Ubuntu 10.04 LTS - the Lucid Lynx" Amd_64 version on my dell vostro 1015. My screen resoultion is set to 1366*768(16.9) by default because the font size on web pages looks too small. I am not able to understand if it is font size too small or is it a resolution set too high. I am trying to fix this because I find very difficult to read web pages specifically. I tried to zoom in on firefox, but that is not permanent solution.
I want to decrease my screen resolution. I opened drop down and I find following:
None of the above resolution suits my laptop. The monitor type identified by Ubuntu says Laptop Monitor.
View 4 Replies
View Related
Feb 27, 2010
I want to stream a radio station that uses .cfm . I've tried a lot of options but without success. Anyone have experience with cfm?
I can stream other stations using vlc media player and even Adobe flash player. But no success with this cfm stream.
View 2 Replies
View Related
Sep 14, 2010
I'm having an issue with rhythmbox in Lucid. I can add and play new radio stations fine. However, upon closing rhythmbox and reopening the radio station disappears from the list. Is there a way to get the stations I add to stay?
View 5 Replies
View Related
Oct 18, 2010
Anyone know how I can play a .wax radio station on ubuntu. The link I have is:URL...I don't think this is possible based on some research but find it hard to believe and do not understand why.
View 5 Replies
View Related
Mar 24, 2011
I have been using Linux and Ubuntu only since the last two months on my (2006) Sony Vaio VGN A617S laptop which is going pretty well on Ubuntu 10.10. When installing Ubuntu audio did get installed alright, and the speakers on the laptop itself are working well even now with the right drivers (snd-hda-intel) for the Realtek ALC260 soundcard.
My problem is when laptop is docked to the A/V docking station (I have seen it referred as a port replicator as well - the model number is VGP-PRAV2), with its two external speakers. And these were not on when Ubuntu was being installed. What is interesting is the headphones jack on the laptop does work when the docking station does not.
I have been trying hard and have already tried quite a few things I saw to be related issues, like:
a) adjustments to some IEC958 in alsamixer
b) using a custom mod for the ALC260 card
View 1 Replies
View Related
Jun 17, 2011
I am using remote boot via PXE boot to an a remote machine. So okay, but when I load the files via NFS, I can not transfer the / lib to my station. I recompiled the kernel, which already influence all NFS packages built in this set as Obrigadao.
View 1 Replies
View Related
Dec 5, 2010
i want to play a specific radio station (which broadcasted on a specific website) on my website too,
so, what are the softwares that i should use for this situation ?? & how can i get that radio station be brodcasted on a box in my website page ??
i searched google, but i found alls talking about creating my own radio station, but thats isnt what i want, i only need to broadcast specific radio station (thats already exists) on my website
View 6 Replies
View Related
Sep 9, 2010
I've been trying to find a bug in this test script, but haven't been able to so far. I'm not lazy, I promise...just new to Bash so am having a hard time catching syntax errors. I call the script with the option -disableVenusBld, and it still prints "Starting build", which it shouldn't be doing right?
[Code]...
View 1 Replies
View Related
