Is there is anyone who owns a wave keyboard who has had any problem with the media keys or regular keys please tell me. I found somethreads about problems with the media key, but I could not fine any recent ones.
View 9 RepliesI just did a clean install to wheezy on my desktop (figured it was safe enough) and I found out my preferred keyboard, the Logitech 'Wave' K350, does not work on the wheezy installer. I tested to see if the mouse would work (M510) and it didn't work either. It works (or at least it did a few months ago) fine on the Squeeze installer. why my K350 didn't work on the install. It's just your typical wireless keyboard & mouse combo.The K350 works fine after the install.
View 6 Replies View RelatedWhen I use the down arrow on my new keyboard it also does and enter key as well. When I use the left and right arrow keys and hold them it doesn't keep going. It just clicks once and I have to pressing it over and over again. Any one know the correct settings to setup my keyboard? It's a Logitech Illuminated Keyboard.
View 2 Replies View RelatedI installed ubuntu (latest version) but I can't use my Logitech MX5500 Revolution Desktop (it uses bluetooth). The problem started right within the installation, I couldn't use mouse or keyboard.
How can this be? I don't think, that it needs additional drivers, it's working fine in the BIOS etc.
Been using Windows 7 for a good while but would love to make a switch over to Ubuntu i installed via WUBI the 64bit of 10.4. The headset is detected and the mic is detected and both work fine but the Dolby 7.1 "effect" does not work at all. Now in Windows a app has to be running for the Dolby part to work. Any thought on how to get that to also work in Ubuntu?
View 9 Replies View RelatedSince I upgraded to 11.04 my logitech illuminated keyboard remains illuminated after shutdown In 10.10 the keyboard light would shut off after pc shutdown...
View 2 Replies View RelatedI've just upgraded from karmic to 10.04. After rebooting my system everything seems to work fine except my mouse and keyboard are not working.
since i have a report due for tomorrow and now i have no way of getting in to the system.
I found this:Software.openSUSE.orgIt's supposed to make G keys work and make them programmable, but i don't know if it'll work for G11 keyboard...Did anyone manage to get the G11 macros to work in Linux?I'm using openSUSE 11.2. 64 bit.I tried searching in YAST for some drivers or something, but couldn't find anything...
View 1 Replies View RelatedAbout 5 years ago I bought a Logitech wireless keyboard. I want to add a wireless mouse now. Logitech has no docs on its website for the keyboard or receiver. Does anyone know how to figure out whether any mouse I buy now will be compatible with my old receiver? I know that all wireless mice come with receivers, but I have limited USB ports.
View 3 Replies View RelatedKeytouch assignments do not take with Logitech Access keyboard. E.g. I have set MyHome key to run <firefox> but it runs a file browser instead. E-Mail works, but that's about all. None of the multimedia keys work.
View 2 Replies View Relatedi'm using a logitech dinovo keyboard/mouse and was trying to figure out if the device is still in boot mode. I don't see the usb hub listed when i hciconfig and i although the udev rules appear to hid2hci, i cant seem to figure out how in the heck i could be paired when i've never went through the process.. lsusb also shows "boot interface subclass" which im guessing means its in bootmode? Im obviously concerned about this because bootmode isnt encrypted.
[Code]....
I use a set of keyboard + mouse Logitech MK330. So, they are wireless in five minutes of inactivity have to sleep. But sleep only the keyboard. The mouse does not fall asleep. On distro Ubuntu and Windows goes into standby mode, both devices. How can I fix it to Debian?
During installation Debian distro, mouse goes to sleep, but on the installed system will not go into standby mode.
Used to be it worked fine natively in 'direct' mode. I didn't need to do any bluetooth setup, I just booted and it worked in BIOS and in Debian. Then one day after a dist-upgrade it quit. I fussed with it for two days, finally installing the Bluez software and trying to make it work as a true bluetooth keyboard/mouse. That's how it's been for six months.
[Code]...
It will not hardware pair once X is started. I've tried it with the bluetooth service started and stopped. Something is preventing it from pairing.
how to map the G keys. i tryed installing g15 daemon but now what am i supposed to do?
View 1 Replies View RelatedHas anyone used this keyboard: Logitech wireless solar keyboard k750
Does it work in linux? any linux? Multimedia keys? etc...
I had a hell of a time getting 10.04 to work, because I only have a Logitech Dinovo Edge keyboard, and it stopped working after I upgraded. After grub, I'd get to the login screen, and the keyboard wouldn't do anything.
First, I dug up a mouse that did work. Then I logged in by clicking the Human Accessibility icon on the login screen. Somewhere in there, I was able to bring up an on screen keyboard. With the on screen keyboard, I could now login. Under system>preferences>bluetooth, I was able to, after some fiddling and plugging and unplugging, get the keyboard paired to the bluetooth dongle. Anyway, it seems pretty obvious now that my original bluetooth pairing was lost with the 10.04 upgrade, and I just needed to re-pair. I don't remember having such problems on previous upgrades, though.
I have been a keen user of Ubuntu since version 7.something. In that time I have updated, upgraded, or done clean installs of each new versions usually about 2 months after the release to enable small bugs to iron out. There have always been minor issues usually easily rectified via this forum. However the 11.04 release is the worst I have ever come across almost forcing me back to winblows. So what is my gripe. -- 7 hours downloading and upgrading -- to obtain a system that does nothing -- nada. zip. it booted came to the desktop and nothing, Unity doesn't respond, no applications open, and the shutdown didn't work.
So -- downloaded the ISO this morning did a clean install and eagerly went into my new system. First issue -- my logitech cordless keyboard is not working, never had an issue before. so plug in a USB one, which is what I am using now. Go to the 'system settings' (took me a while to find where they had gone) but couldn't find anything in the keyboard section to allow me to configure a cordless keyboard. Failure 1
Open banshee and ask it to load the music library. It does, then click for a file to play and --- no sound! so choose another track just in case and banshee crashes, and the icon disappears from the unity bar. Failure 2 As usual I have an Nvidea graphics card so one of the first things is to install the proprietary driver. Never had an issue before. this time it loaded (apparently) and then I do the restart to enable it, and when I get back in there is no top bar, the Unity bar sits there and won't slide in and out, and no applications will respond. BIG failure 3
Re boot into recovery mode and opt for safe graphics mode. System re boots - Top bar now appears, Unity remains inoperative, and when I click the shutdown icon to get to system settings --- crash and burn system shuts down.-- BIG failure 4 Re boot into recovery mode (again) run "fix broken packages" DPKG runs for a while replacing and upgrading hundreds of packages. When finished reboot -- same issue desktop stuffed! Currently working off the live CD. To the developers -- maybe you are pushing ahead too quickly now. this sort of overall failure will lose more users than gain. I don't usually complain but as my title says for me Natty is an unmitigated disaster.
I have a Logitech G11 keyboard with additional function keys from G1 to G18 and I added those keys to my XKeysymDB and ~/.xmodmaprc accordingly. According to xev, all those keys are working properly, eg.:
$ xev
...
KeyPress event, serial 35, synthetic NO, window 0x3400001,
root 0x15d, subw 0x0, time 3518287, (167,-33), root:(1501,366),
state 0x10, keycode 175 (keysym 0x15000001, G1), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
Now, if I try to bind any of those keys to global shortcuts in KDE I got a dialog telling: "The key you just pressed is not supported by Qt." these keys were working perfectly well in Lenny and KDE 3.5. I did some research, and it really seems that this is a some kind of "feature" in KDE 4.2 or Qt. So, is there any way to fix this easily in Squeeze without switching to Wheezy or even Sid?
So Ive had this issue off and on for a while now, but have never really looked to see if others have had it or how I can fix it. Essentially the problem is that kde seems to randomly decide that I am holding down the shift or ctrl key.Im using a logitech cordless desktop s510, running openSUSE 11.3 x86_64. Ive had this problem on and off using a couple of different logitech keyboards. The most often time when it happens with the shift key is when im coding, and the control key when Im running a keyboard shortcut.
I can usually fix the issue by holding down the key that kde thinks is pressed for like 5-10 seconds and releasing, however sometimes I have to unplug and then replug in the usb adapter for kde to get things right. This doesnt happen if im running a non-graphical terminal (thouhg I cant say whether it happens in gnome as I dont have gnome installed) so I am thinking its related to kde. The keyboard can be plugged into other computers and they dont act the same way.
This gets esspecially annoying when Im coding (because of all the symbols) and generally when the issue occurs. I think it may have something to do with the key being pressed for over a certain length.
I am suffering from the following problem: after updating udev from 125 (lenny) to 151 (squeeze) my wireless keyboard Logitech diNovo Edge totally stopped working (says it is disconnected). If I downgrade back to 125 all works fine again.
View 4 Replies View RelatedThere are not SSDs with TRIM support available in my region that fit into my laptop (1.8", IDE, ZIF). I'm running Ubuntu 10.10.
Most articles (or questions on superuser) I've come across concering TRIM (or the lack thereof) date back to 2009, when not many SSDs with TRIM support were available and OS support was still very fresh.
I'm interested in the current situation, but I couldn't find too much information about it.
What are currently the "best practices" for using an SSD without TRIM under Linux?
I've read about the wiper script included with hdparm. Do I understand correctly that I could use this to free unused blocks, e.g. by running it once a month?
Some sources state that HFS+ (the default-filesystem of Mac OS X) doesn't suffer as badly from lack of TRIM as other filesystems. How about linux filesystems? Are there filesystems that are better suited for SSDs without TRIM than others?
My old Palm is on the way out. Which modern phone / PDA works these days - like sync contacts etc Which application ? Thunderbird , evolution, web based?
View 2 Replies View RelatedI failed to get webcam support on CURRENT with Skype version 2.1.0.81, Skype did not see the device at all (using libv4l).Downgraded Skype to version 2.0.0.72 and webcam works well.
View 7 Replies View RelatedI'd like to know if there is a way to retrieve the current x-keyboard disposition (with a command or maybe an environmemt variable?) when it has for instance been modified with setxkbmap?
View 1 Replies View RelatedDoes anyone know of a variant on the Logitech SetPoint software (it allows more functions for Logitech keyboards and mice) for Ubuntu? Would the Windows version work in Wine? I didn't think it would because the app uses Bluetooth, and I don't know if Wine can do that.
View 2 Replies View RelatedWhilst trying to install Slackware -current (using the usbboot.img), I'm able to hit enter to boot the hugesmp kernel but when it comes to pressing 1 to select a non-US keyboard map, nothing happens. It's a USB keyboard incidentally.
View 2 Replies View RelatedI have been trying to convince myself to install ubuntu 10.04 64BIT because it's just perfect,,
and i used to use windows and i used virtual keyboard alot cuz i need to type in my language sometimes and it's Thai,as you know i can't get a hardware keyboard that has Thai letters on them , i live in Oman,,so iused Virtual keyboard.And What i want to request is that is there anybody can figure anything out if there is a virtual keyboard for Ubuntu?
I have two keyboard layouts installed in my system and I need to determine in scripts which one I'm on. What the environment variable contains indicator of current keyboard layout?
Debian GNU/Linux 5.0.4;
GNOME 2.22.3.
I'm using -current (xfce-4.6.2) I've noticed that the shortcuts I define aren't working anymore. The ones I define through windowmanager -> keyboard are ok, but the ones through keyboard-> application shortcuts are ignored.
View 5 Replies View Relatedusing U10.04, i upgraded from 9.04, now keyboard or mouse wont work. using a laptop, ect
View 9 Replies View Related