Debian Installation :: Logitech K350 Keyboard - Not Functional During Install
May 8, 2012
I just did a clean install to wheezy on my desktop (figured it was safe enough) and I found out my preferred keyboard, the Logitech 'Wave' K350, does not work on the wheezy installer. I tested to see if the mouse would work (M510) and it didn't work either. It works (or at least it did a few months ago) fine on the Squeeze installer. why my K350 didn't work on the install. It's just your typical wireless keyboard & mouse combo.The K350 works fine after the install.
View 6 Replies
ADVERTISEMENT
Jan 5, 2011
Is there is anyone who owns a wave keyboard who has had any problem with the media keys or regular keys please tell me. I found somethreads about problems with the media key, but I could not fine any recent ones.
View 9 Replies
View Related
Nov 17, 2015
I use a set of keyboard + mouse Logitech MK330. So, they are wireless in five minutes of inactivity have to sleep. But sleep only the keyboard. The mouse does not fall asleep. On distro Ubuntu and Windows goes into standby mode, both devices. How can I fix it to Debian?
During installation Debian distro, mouse goes to sleep, but on the installed system will not go into standby mode.
View 0 Replies
View Related
Jun 1, 2011
Used to be it worked fine natively in 'direct' mode. I didn't need to do any bluetooth setup, I just booted and it worked in BIOS and in Debian. Then one day after a dist-upgrade it quit. I fussed with it for two days, finally installing the Bluez software and trying to make it work as a true bluetooth keyboard/mouse. That's how it's been for six months.
[Code]...
It will not hardware pair once X is started. I've tried it with the bluetooth service started and stopped. Something is preventing it from pairing.
View 5 Replies
View Related
Jul 3, 2011
I have a Logitech G11 keyboard with additional function keys from G1 to G18 and I added those keys to my XKeysymDB and ~/.xmodmaprc accordingly. According to xev, all those keys are working properly, eg.:
$ xev
...
KeyPress event, serial 35, synthetic NO, window 0x3400001,
root 0x15d, subw 0x0, time 3518287, (167,-33), root:(1501,366),
state 0x10, keycode 175 (keysym 0x15000001, G1), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
Now, if I try to bind any of those keys to global shortcuts in KDE I got a dialog telling: "The key you just pressed is not supported by Qt." these keys were working perfectly well in Lenny and KDE 3.5. I did some research, and it really seems that this is a some kind of "feature" in KDE 4.2 or Qt. So, is there any way to fix this easily in Squeeze without switching to Wheezy or even Sid?
View 3 Replies
View Related
Mar 28, 2010
I am suffering from the following problem: after updating udev from 125 (lenny) to 151 (squeeze) my wireless keyboard Logitech diNovo Edge totally stopped working (says it is disconnected). If I downgrade back to 125 all works fine again.
View 4 Replies
View Related
Aug 7, 2010
I had a hell of a time getting 10.04 to work, because I only have a Logitech Dinovo Edge keyboard, and it stopped working after I upgraded. After grub, I'd get to the login screen, and the keyboard wouldn't do anything.
First, I dug up a mouse that did work. Then I logged in by clicking the Human Accessibility icon on the login screen. Somewhere in there, I was able to bring up an on screen keyboard. With the on screen keyboard, I could now login. Under system>preferences>bluetooth, I was able to, after some fiddling and plugging and unplugging, get the keyboard paired to the bluetooth dongle. Anyway, it seems pretty obvious now that my original bluetooth pairing was lost with the 10.04 upgrade, and I just needed to re-pair. I don't remember having such problems on previous upgrades, though.
View 1 Replies
View Related
Jun 28, 2011
I have been a keen user of Ubuntu since version 7.something. In that time I have updated, upgraded, or done clean installs of each new versions usually about 2 months after the release to enable small bugs to iron out. There have always been minor issues usually easily rectified via this forum. However the 11.04 release is the worst I have ever come across almost forcing me back to winblows. So what is my gripe. -- 7 hours downloading and upgrading -- to obtain a system that does nothing -- nada. zip. it booted came to the desktop and nothing, Unity doesn't respond, no applications open, and the shutdown didn't work.
So -- downloaded the ISO this morning did a clean install and eagerly went into my new system. First issue -- my logitech cordless keyboard is not working, never had an issue before. so plug in a USB one, which is what I am using now. Go to the 'system settings' (took me a while to find where they had gone) but couldn't find anything in the keyboard section to allow me to configure a cordless keyboard. Failure 1
Open banshee and ask it to load the music library. It does, then click for a file to play and --- no sound! so choose another track just in case and banshee crashes, and the icon disappears from the unity bar. Failure 2 As usual I have an Nvidea graphics card so one of the first things is to install the proprietary driver. Never had an issue before. this time it loaded (apparently) and then I do the restart to enable it, and when I get back in there is no top bar, the Unity bar sits there and won't slide in and out, and no applications will respond. BIG failure 3
Re boot into recovery mode and opt for safe graphics mode. System re boots - Top bar now appears, Unity remains inoperative, and when I click the shutdown icon to get to system settings --- crash and burn system shuts down.-- BIG failure 4 Re boot into recovery mode (again) run "fix broken packages" DPKG runs for a while replacing and upgrading hundreds of packages. When finished reboot -- same issue desktop stuffed! Currently working off the live CD. To the developers -- maybe you are pushing ahead too quickly now. this sort of overall failure will lose more users than gain. I don't usually complain but as my title says for me Natty is an unmitigated disaster.
View 6 Replies
View Related
Mar 15, 2010
When I use the down arrow on my new keyboard it also does and enter key as well. When I use the left and right arrow keys and hold them it doesn't keep going. It just clicks once and I have to pressing it over and over again. Any one know the correct settings to setup my keyboard? It's a Logitech Illuminated Keyboard.
View 2 Replies
View Related
Jul 26, 2010
I just tried Software Center on my freshly installed Testing, but it does not work: when I click on Install it turns gray and nothing happens. How can I make this application functional?
View 14 Replies
View Related
Nov 16, 2010
How can I implement this: I encrypt a partition using LUKS, and store personal data on this partition. Then create a user account that solely deals with this partition and insulated from the Internet. Normally for each boot I do not even need to mount the LUKS encrypted partition, and when I mount that partition under that special user account, I can make sure that the Internet is cut off.
I'm going to do the installation these days, could you provide a brief sketch regarding what steps I should go through to implement the above result?
View 4 Replies
View Related
Jan 29, 2010
My Debian System GUI (Gnome desktop) is not functional (which means I can't take snapshots of the codes, use openofice, edit photos, watch movies and am using a different computer) after I installed updates when I was notified about updates by the "system notifier icon".
The "hal" package is broken, and the GDM informs, after unsuccessfully trying to boot the GUI thrice, that kbd, nvidia and x11
View 1 Replies
View Related
May 4, 2011
Since I upgraded to 11.04 my logitech illuminated keyboard remains illuminated after shutdown In 10.10 the keyboard light would shut off after pc shutdown...
View 2 Replies
View Related
Jun 14, 2010
I found this:Software.openSUSE.orgIt's supposed to make G keys work and make them programmable, but i don't know if it'll work for G11 keyboard...Did anyone manage to get the G11 macros to work in Linux?I'm using openSUSE 11.2. 64 bit.I tried searching in YAST for some drivers or something, but couldn't find anything...
View 1 Replies
View Related
Dec 22, 2010
About 5 years ago I bought a Logitech wireless keyboard. I want to add a wireless mouse now. Logitech has no docs on its website for the keyboard or receiver. Does anyone know how to figure out whether any mouse I buy now will be compatible with my old receiver? I know that all wireless mice come with receivers, but I have limited USB ports.
View 3 Replies
View Related
May 2, 2010
Keytouch assignments do not take with Logitech Access keyboard. E.g. I have set MyHome key to run <firefox> but it runs a file browser instead. E-Mail works, but that's about all. None of the multimedia keys work.
View 2 Replies
View Related
Apr 19, 2011
anyway the reason for my posti downloaded a network install of wheezypartitioned and loaded wheezy on to a dell latitude d600now after installation the keyboard and mouse ( touchpad or nipple ) do not functionsince this inconvenience i have been plugging in a usb keyboard and mouse at the graphical login then using them to work the laptopAfter a reboot the usb peripherals do need to be uplugged and reconnected otherwise they also do not functioni am obviously missing something vital here but i am not sure where to start, kernel 2.6.38.2-686
i have loaded the non-free repos added the various firmware files etc. to get wireless and bluetooth to functionbut the keyboard and mouse has me stumped i have searched the forum and google but haven't come across anyone with the same issue.Some forum suggestions have been to reconfigure xorg.conf but this does not exist on this installevdev - the event driver is thereudev - the kernel device manager is also there
View 13 Replies
View Related
Dec 10, 2010
how to map the G keys. i tryed installing g15 daemon but now what am i supposed to do?
View 1 Replies
View Related
May 2, 2010
I've just upgraded from karmic to 10.04. After rebooting my system everything seems to work fine except my mouse and keyboard are not working.
since i have a report due for tomorrow and now i have no way of getting in to the system.
View 9 Replies
View Related
May 21, 2011
Has anyone used this keyboard: Logitech wireless solar keyboard k750
Does it work in linux? any linux? Multimedia keys? etc...
View 2 Replies
View Related
Sep 1, 2011
I found my web cam it is a Logitech Express cam I just want to know how to get the driver so I can use it in Firefox for like tinychat it works for cheese fine but That doesn't mean that it works for my web browser?
View 1 Replies
View Related
Mar 21, 2010
i'm using a logitech dinovo keyboard/mouse and was trying to figure out if the device is still in boot mode. I don't see the usb hub listed when i hciconfig and i although the udev rules appear to hid2hci, i cant seem to figure out how in the heck i could be paired when i've never went through the process.. lsusb also shows "boot interface subclass" which im guessing means its in bootmode? Im obviously concerned about this because bootmode isnt encrypted.
[Code]....
View 2 Replies
View Related
Mar 2, 2011
So Ive had this issue off and on for a while now, but have never really looked to see if others have had it or how I can fix it. Essentially the problem is that kde seems to randomly decide that I am holding down the shift or ctrl key.Im using a logitech cordless desktop s510, running openSUSE 11.3 x86_64. Ive had this problem on and off using a couple of different logitech keyboards. The most often time when it happens with the shift key is when im coding, and the control key when Im running a keyboard shortcut.
I can usually fix the issue by holding down the key that kde thinks is pressed for like 5-10 seconds and releasing, however sometimes I have to unplug and then replug in the usb adapter for kde to get things right. This doesnt happen if im running a non-graphical terminal (thouhg I cant say whether it happens in gnome as I dont have gnome installed) so I am thinking its related to kde. The keyboard can be plugged into other computers and they dont act the same way.
This gets esspecially annoying when Im coding (because of all the symbols) and generally when the issue occurs. I think it may have something to do with the key being pressed for over a certain length.
View 7 Replies
View Related
Nov 6, 2010
I am very eager to get two-finger scrolling in my acer 5740, but the big issue is my touchpad is not fully functional
"xinput llist" already detects the touchpad as
SynPS/2 Synaptics TouchPad id=12 [slave pointer (2)]
The xorg log shows dual loading of touchpad driver
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[Code]...
But still after completely removing the xorg log and restarting the X, the log reports as
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
(**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
"synclient -l" though shows a long list of already set values, the touchpad is not working properly. How can I prevent this dual loading of drivers ? Kindly enlighten me , so that I can have a properly working touchpad. If any more info is required, then please ask me. There is no xorg.conf. I tried to generate one by "Xorg :1 -configure", but the generated file did not have any section related to touchpad.
View 2 Replies
View Related
Nov 16, 2010
I encrypt a partition using LUKS, and store personal data on this partition. Then create a user account that solely deals with this partition and insulated from the Internet. Normally for each boot I do not even need to mount the LUKS encrypted partition, and when I mount that partition under that special user account, I can make sure that the Internet is cut off. I'm going to do the alternate installation these days, could you provide a brief sketch regarding what steps I should go through to implement the above result?
View 2 Replies
View Related
Sep 6, 2010
Trying to upgrade the following packages in Squeeze: apt apt-utils aptitude libept1 python-apt synaptic
The output terminal gets hung up with this message: WARNING: terminal is not fully functional /tmp/tmp9PEsnI (press RETURN)
After pressing RETURN:
apt (0.7.26-exp3) experimental; urgency=low
* apt-ftparchive now reads the standard configuration files in
/etc/apt/apt.conf and /etc/apt/apt.conf.d
[code].....
View 4 Replies
View Related
Apr 15, 2010
Does anyone know of a variant on the Logitech SetPoint software (it allows more functions for Logitech keyboards and mice) for Ubuntu? Would the Windows version work in Wine? I didn't think it would because the app uses Bluetooth, and I don't know if Wine can do that.
View 2 Replies
View Related
Nov 17, 2010
I downloaded Ubuntu and burned it to a CD-There was no problem with that part. It starts to install asks about the partition then the keyboard. Then it just stops and does nothing.
View 3 Replies
View Related
May 23, 2015
I was using a custom layout for my keyboard as I've a UK laptop but still use french accents sometimes. After the update from Wheezy to Jessie my configs disappeared so I have put them back:
- Defining my layout here: /usr/share/X11/xkb/symbols/gb
- Adding here: /usr/share/X11/xkb/rules/base.xml and here /usr/share/X11/xkb/rules/evdev.xml in the gb configItem
Code: Select all    <variant>
     <configItem>
      <name>accentsFR</name>
      <description>English (UK with french accents)</description>
     </configItem>
    </variant>
- Adding the declaration of the layout here /usr/share/X11/xkb/rules/base.lst and here /usr/share/X11/xkb/rules/evdev.lst
Code: Select all accentsFR    gb: English (UK with french accents)
So everything looks alright, if I go to System Tools -> Preferences -> Settings -> Keyboard -> Input Source my layout is well selected and I can even see the correct layout by clicking on the keyboard icon (cf my snapshot)
Here is the snapshot of the keyboard input source settings: [URL]....
View 1 Replies
View Related
Jan 10, 2011
I'm trying to install Debian Testing onto my Acer Aspire One ZG5 using the testing versions of boot.img and debian-testing-i386-CD-1.iso. I previously installed (two days ago) the latest release of stable, and the boot.img/CD1 from that worked fine, installed seamlessly. With testing though, the menu does not respond to the keyboard as soon as the menu appears to select Install/Graphical install/Help, etc. I have also tried to boot with an external (USB) keyboard, which again, works fine with the stable version of boot.img/CD1, but not testing.I did some searching and couldn't find anything that looked similar
View 6 Replies
View Related
