I am suffering from the following problem: after updating udev from 125 (lenny) to 151 (squeeze) my wireless keyboard Logitech diNovo Edge totally stopped working (says it is disconnected). If I downgrade back to 125 all works fine again.
View 4 RepliesI had a hell of a time getting 10.04 to work, because I only have a Logitech Dinovo Edge keyboard, and it stopped working after I upgraded. After grub, I'd get to the login screen, and the keyboard wouldn't do anything.
First, I dug up a mouse that did work. Then I logged in by clicking the Human Accessibility icon on the login screen. Somewhere in there, I was able to bring up an on screen keyboard. With the on screen keyboard, I could now login. Under system>preferences>bluetooth, I was able to, after some fiddling and plugging and unplugging, get the keyboard paired to the bluetooth dongle. Anyway, it seems pretty obvious now that my original bluetooth pairing was lost with the 10.04 upgrade, and I just needed to re-pair. I don't remember having such problems on previous upgrades, though.
I've just upgraded from karmic to 10.04. After rebooting my system everything seems to work fine except my mouse and keyboard are not working.
since i have a report due for tomorrow and now i have no way of getting in to the system.
Used to be it worked fine natively in 'direct' mode. I didn't need to do any bluetooth setup, I just booted and it worked in BIOS and in Debian. Then one day after a dist-upgrade it quit. I fussed with it for two days, finally installing the Bluez software and trying to make it work as a true bluetooth keyboard/mouse. That's how it's been for six months.
[Code]...
It will not hardware pair once X is started. I've tried it with the bluetooth service started and stopped. Something is preventing it from pairing.
It works under Windoze but in Linux the integrated mouse doesn't work. Whilst it's forced me to learn some keyboard shortcuts, the mouse would help a lot.
This is my media PC. I run currently run Mandriva 2008 & use Kafiene to watch/record etc TV.
i have the 64 bit version (my computer is 64 bit) of lucid lynx and my edge scrolling doesnt work.
View 1 Replies View RelatedI recently migrated from Gentoo Linux to openSuSE because I no longer have that much time to maintain the sane state of my system, and want my computer to just work when I need it.. So far openSuSE surprised me and I was able to configure my system almost completely without even touching the shell where I almost lived in the Gentoo days..
However, I'm not able to make openSuSE automatically detect my logitech BT dongle (as part of a dinovo keyboard and mouse set) and switch it from HID to HCI mode so I'm able to use bluetooth.
What does work is this:
Code:
# /usr/sbin/hid2hci --method=logitech --vendor=046d --product=c70c
Then the dongle is switched to HCI mode, a bluetooth applet appears in gnome and I was able to pair with the keyboard, keypad, mouse and mobile phone
But I don't want to manually run that command each time, so I figured the best way is to let udev handle that (?).. As I didn't find any udev rules to perform such an action I tried creating one myself, however, I'm not sure that I'm doing it right /etc/udev/rules.d/70-hid2hci:
Code:
ATTRS{idVendor}=="046d", ATTRS{idProduct}=="c70[345abce]|c71[34bc]", RUN+="/usr/sbin/hid2hci --method=logitech --vendor=$attr{idVendor} --product=$attr{idProduct}"
But that doesn't seem to work..(yes I reloaded the udev rules using udevadm)
how do I make this work? And shouldn't it already work out-of-the-box?
I have a debian box connected to a windows storage server.
For a number of years I have been using CIFS to connect, and now it seems to have stopped working.
Code: Select all~# mount -t cifs //192.168.97.66/sharefolder/ /localfolder -o rw,file_mode=0666,dir_mode=0777,username=NASuser,password=**** -vvv
mount: fstab path: "/etc/fstab"
mount: mtab path:Â "/etc/mtab"
mount: lock path:Â "/etc/mtab~"
mount: temp path:Â "/etc/mtab.tmp"
mount: UID:Â Â Â Â 0
mount: eUID:Â Â Â Â 0
mount: spec:Â "//192.168.97.66/sharefolder/"
[CODE]
I'm in somewhat of a sticky situation. ssh has just randomly stopped working on my server after a power failure. Everything else that doesn't rely on ssh is still working fine though. It can still receive mail and everything, just no ssh.Background on the server, running debian etch on a PPC machine.ssh is (supposed to be) running on port 2000. Even if I am physically logged into the machine I can't log in with ssh -p 2000 user@127.0.0.1.
I can ssh to and from any other machine on my network (the server can even ssh into another machine). So it isn't my network causing issues.It seems like the port 2000 is completely closed, if nmap the server's IP address I get PORT STATE SERVICE
25/tcp open smtp
80/tcp open http
110/tcp open pop3
[code]...
I tried to install Debian 8.1 on Lenovo Edge 125, but on stage ''detecting network hardware' of install process my laptop stopped and froze, so I don't know what to do. (Previously I've installed Debian 6 or 7 on this laptop and every thing was OK).
View 6 Replies View RelatedI was running 2.6.26 and I've recently upgraded to 2.6.32-trunk-amd64 along with other packages (mostly dependencies)... which possibly involved the network stack.
After this upgrade my home gateway stopped working and I'm clueless to where the problem may be.
I can see that the iptables are still there when I type:
iptables -t filter -L -v -n -x --line-numbers
iptables -t nat -L -v -n -x --line-numbers
My plex media server suddenly stopped working after years of no hassle use. This is the output of cat /proc/version = Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.65-1+deb7u2
My problem is similar to this forum thread viewtopic.php?f=5&t=121945 where I can get it to start by running Code: Select all/usr/sbin/start_pms & but it's not my normal server configuration. I added a couple files to it and it seems to work except it doesn't start when I reboot. I have to run that command again.This is the init script I've been running for years...
Code: Select all----
#!/bin/sh
### BEGIN INIT INFO
# Provides:Â Â Â Â Â plexmediaserver
# Required-Start:Â Â $remote_fs $syslog $networking
# Required-Stop:Â Â Â
[code]....
My Debian skills are lacking to know how to proceed with troubleshooting what could have happened. Everything else seems fine, I just can't seem to get this application to run at startup or get back my old configuration...
I have been using my system for couple of weeks, and normally update software when the icon is displayed on top bar (gnome). Last couple of days there were updates for X, and I am not sure whether that is the cause of my problem. Once bootup, I get the login screen. When enter the password the login screen keep coming back. there is no error about any password issue, or anything. It keeps prompt me to enter the password.
I could login back the following way.
1. ctrl + alt + F1 , and login with the same username/pwd as for X
2.change to root
3.pkill gdm3
4.exit from root to user privilege
5. startx
The system starts X correctly and no login screen is displayed. I could use the system as usual.
The only thing I did custom to my system was upgrading to the latest kernel (2.6.38) using the source. This was to get support for my hardware, but that was about a month ago. I do not see anything in /var/log (X, demesg etc).
My GNOME system stopped using the proprietary NVIDIA drivers after the recent dist-upgrade to v6.0.1. It was working perferctly before that.
My inxi output:
inxi -F
System: Host thirra-ws1 Kernel 2.6.32-5-686 i686 (32 bit) Distro Debian GNU/Linux squeeze/sid
CPU: Dual core Intel Core2 Duo E7500 (SMP) cache 3072 KB flags (sse3 nx lm vmx) bmips 11703.9
[Code].....
When I tried to configure the screen resolution using NVIDIA X server settings, I was told to run 'nvidia-xconfig'. I ran it, restarted X but my resolution is still stuck at the maximum of 1024x768. I've tried running the above many times with the same results. I even tried aptitude reinstalling but still the same.
The purpose of that topic is to identify if there is any way to totally clean a debian system and make it like a fresh installed system (of course i amn't refering to packages because aptitude is just perfect?
View 3 Replies View RelatedI have been a keen user of Ubuntu since version 7.something. In that time I have updated, upgraded, or done clean installs of each new versions usually about 2 months after the release to enable small bugs to iron out. There have always been minor issues usually easily rectified via this forum. However the 11.04 release is the worst I have ever come across almost forcing me back to winblows. So what is my gripe. -- 7 hours downloading and upgrading -- to obtain a system that does nothing -- nada. zip. it booted came to the desktop and nothing, Unity doesn't respond, no applications open, and the shutdown didn't work.
So -- downloaded the ISO this morning did a clean install and eagerly went into my new system. First issue -- my logitech cordless keyboard is not working, never had an issue before. so plug in a USB one, which is what I am using now. Go to the 'system settings' (took me a while to find where they had gone) but couldn't find anything in the keyboard section to allow me to configure a cordless keyboard. Failure 1
Open banshee and ask it to load the music library. It does, then click for a file to play and --- no sound! so choose another track just in case and banshee crashes, and the icon disappears from the unity bar. Failure 2 As usual I have an Nvidea graphics card so one of the first things is to install the proprietary driver. Never had an issue before. this time it loaded (apparently) and then I do the restart to enable it, and when I get back in there is no top bar, the Unity bar sits there and won't slide in and out, and no applications will respond. BIG failure 3
Re boot into recovery mode and opt for safe graphics mode. System re boots - Top bar now appears, Unity remains inoperative, and when I click the shutdown icon to get to system settings --- crash and burn system shuts down.-- BIG failure 4 Re boot into recovery mode (again) run "fix broken packages" DPKG runs for a while replacing and upgrading hundreds of packages. When finished reboot -- same issue desktop stuffed! Currently working off the live CD. To the developers -- maybe you are pushing ahead too quickly now. this sort of overall failure will lose more users than gain. I don't usually complain but as my title says for me Natty is an unmitigated disaster.
on my netbook I have a Debian unstable/sid system. A few days ago I did an apt-get (dist-)upgrade which I think also updated the X-Server. Since then my netbooks keyboard and touchpad are not working as soon as the desktop is started (I think gdm).
The Keyboard works during the Grub selection and also in recovery mode (Root Terminal), so I'm sure its not a hardware problem. Could it be that the X-Server unloads the kernel modules for those two devices?Also if I plug in a USB keyboard or mouce they are working.
I use a set of keyboard + mouse Logitech MK330. So, they are wireless in five minutes of inactivity have to sleep. But sleep only the keyboard. The mouse does not fall asleep. On distro Ubuntu and Windows goes into standby mode, both devices. How can I fix it to Debian?
During installation Debian distro, mouse goes to sleep, but on the installed system will not go into standby mode.
I just did a clean install to wheezy on my desktop (figured it was safe enough) and I found out my preferred keyboard, the Logitech 'Wave' K350, does not work on the wheezy installer. I tested to see if the mouse would work (M510) and it didn't work either. It works (or at least it did a few months ago) fine on the Squeeze installer. why my K350 didn't work on the install. It's just your typical wireless keyboard & mouse combo.The K350 works fine after the install.
View 6 Replies View RelatedI have a Logitech G11 keyboard with additional function keys from G1 to G18 and I added those keys to my XKeysymDB and ~/.xmodmaprc accordingly. According to xev, all those keys are working properly, eg.:
$ xev
...
KeyPress event, serial 35, synthetic NO, window 0x3400001,
root 0x15d, subw 0x0, time 3518287, (167,-33), root:(1501,366),
state 0x10, keycode 175 (keysym 0x15000001, G1), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
Now, if I try to bind any of those keys to global shortcuts in KDE I got a dialog telling: "The key you just pressed is not supported by Qt." these keys were working perfectly well in Lenny and KDE 3.5. I did some research, and it really seems that this is a some kind of "feature" in KDE 4.2 or Qt. So, is there any way to fix this easily in Squeeze without switching to Wheezy or even Sid?
Ubuntu 9.04Dell desktop pcKeyboard stopped workingI was in the middle of an emailwhen my keyboard stopped working.I rebooted.Keyboard worked for Windows Vista.Keyboard worked for Ubuntu login.But once in Ubuntu no keyboard.Mouse works fine. think I may have accidentally touchedthe control key when doing the email
View 2 Replies View RelatedI'm running 10.04, typically using the default gnome session. I locked my screen overnight, and when I came back the keyboard wasn't working. Before anyone asks, yes it is still plugged in. Here's where it gets weird. I logged out using the mouse, and switched to another user on the system, and it works fine. I have keyboard input on the gdm log on screen and for other users. I've tried about every possible combination of logging on/off and rebooting and nothing seems to work. Is this an Xorg thing or a gnome thing? Any ideas what to do from here? I can still get to a terminal through another user and then "su" to my user so I can run "sudo" commands. So in other words, no need to bring in a live CD or a clean install at this point, but I don't really know where to start with this one.
UPDATE: I switched session types to LXDE, and the keyboard DOES work for my user. However, when going back to gnome it still doesn't work. I guess that seems to point towards it being a gnome thing, not Xorg.
I kind of feel like I'm out there hanging by myself when trying to understand Ubuntu. If there is a tutorial or guide for beginners, please feel free to post the link to it!I recently updated Ubuntu 11.04 on my dads computer and after the restart I noticed his keyboard no longer works. Well, it's has the light on like normally, but it's like the computer doesn't recognize it.
View 1 Replies View RelatedI am running 8.10 64 bit on my laptop and when making a new user I noticed that on my shell prompt, it said "I have no name!". It was bugging me so I logged out and went to log back in. I got some error saying I was logged in for less than 10 seconds after trying a couple times to login. So I restarted and now my mouse and keyboard don't work!
View 1 Replies View Relatedi first noticed it while running VLC when at least one of my keyboard hotkeys stopped working. I tried reassigning the key and then reinstalling the packages from SPM and it failed (using kow's ppa) then i did a clean uninstall and reinstall from A/R programs, which didnt fix anything. then later i had problems typing in firefox, specifically with the number pad (the hotkey i'm referring to is also part of the number pad) something makes me think it's my keyboard or keyboard driver, i've been keeping up with the updates for Jaunty, including the most recent kernel update.
View 2 Replies View RelatedI've been running Ubuntu Lucid for six months now without problems. Last night my keyboard suddenly stopped working in any applications under Gnome. Rebooting didn't help. Mouse still works fine.But the keyboard still works fine when typing in my password, and if I start KDE instead it also works OK. So it doesn't seem to be hardware failure.I see from googling that others have had similar problems, but most seem to have been on installation, and involved either VMWare or USB keyboards. I'm not using either of those.When it broke I was trying to build PyCairo into an alternative installation of Python2.5, don't know if this is relevant, if some key package got somehow corrupted.
View 1 Replies View RelatedAfter I updated to 10.10, my ps/2 keyboard and mouse stopped working when in the gnome environment.I have tried to solve this by following the instructions here:
http://ubuntuforums.org/showthread.p...mouse+-working
. . . and by turning off usb legacy in the bios
. . . and by running these commands:
Code:
sudo update-rc.d -f gdm remove
sudo update-rc.d gdm defaults 25[code]..But nothing has worked so far.
I have recently noticed that my keyboard shortcuts stopped working.Things like F2 to rename files/folders, I think its ALT+F1 to bring up applications menu, however it comes up with a dialog saying Power Information. I also can not use backspace in FF to go back a page and things like that, which I find very annoying because I prefer to navigate with the keyboard and that deal.Yes I have Compiz installed however I have for a few months now without this problem which appeared only within the last fw days. I have had k at the keyboard shortcuts in Compiz and set them to default but nothing changed
View 1 Replies View RelatedI'm using Ubuntu 9.10. All of a sudden several of my function keys stopped working and several keyboard shortcuts that I had setup involving function keys stopped working as well.
For example, when I go to preferences->keyboard shortcuts and try to set "Toggle fullscreen mode" to Alt+F11, the text "XF86AudioRaiseVolume" appears where it should just say "Alt+F11". Pressing Alt+F11 does nothing.
All of my function keys somehow got mapped to XF86AudioBlahBlah and no longer work. How do I undo this? I recently installed ffmpeg and gtk-recordmydesktop but I don't think I installed anything else.
I am trying to get Skype working, the only problem is the webcam, in the test video all I get is a black screen.
After some research I found this command to get Skype to work with my webcam, as you can see there are a few errors.
Below is a listing of of /usr/lib/libv4l/ directory
Other than the video, eveything seems to be working.
This is on Skype 2.2, Skype 2.1 was the same. webcam works fine.