I use a set of keyboard + mouse Logitech MK330. So, they are wireless in five minutes of inactivity have to sleep. But sleep only the keyboard. The mouse does not fall asleep. On distro Ubuntu and Windows goes into standby mode, both devices. How can I fix it to Debian?
During installation Debian distro, mouse goes to sleep, but on the installed system will not go into standby mode.
About 5 years ago I bought a Logitech wireless keyboard. I want to add a wireless mouse now. Logitech has no docs on its website for the keyboard or receiver. Does anyone know how to figure out whether any mouse I buy now will be compatible with my old receiver? I know that all wireless mice come with receivers, but I have limited USB ports.
View 3 Replies View RelatedI have a couple of Logitech wireless mice (M325) with USB Unifying receivers, one for a couple of netbooks (Asus & HP) and one for my old desktop. These have been working very nicely
under 32 bit OSs :-
Windows XP
Debian testing (Wheezy & Jessie)
I now have a new 64 bit desktop (Intel i5) and the Logitech mouse
DOES work with :-
The Bios
Windows 7
But it does NOT work with :-
Debian Jessie
I have found an old mechanical Sun 3 button mouse (USB), which has got me
working to some extent, but does remind me why I got an optical wireless mouse!
My old 32 bit desktop reports :-
Code: Select all$ uname -a
Linux copper 3.10-2-686-pae #1 SMP Debian 3.10.7-1 (2013-08-17) i686 GNU/Linux
Code: Select all$ lsmod | grep hid
hid_logitech_dj 13054 0
usbhid 36040 0
hid 64702 2 usbhid,hid_logitech_dj
usbcore 110348 4 uhci_hcd,ehci_hcd,ehci_pci,usbhid
[Code]....
I need to get the comparative info off the new desktop, but I am currently hampered by the old mouse and the bug, whereby when I asked for the LXDE desktop I also got Gnome installed, and Lightdm ignores my request to start LXDE and dumps me in Gnome!!
The main differences that I have found was in the modules where the 32 bit one uses uhci_hcd, while the 64 bit one uses xhci_hcd. The dmesg section is like the above, finding the Unifying device, but is missing the last line where djdevice finds the mouse..
I've just upgraded from karmic to 10.04. After rebooting my system everything seems to work fine except my mouse and keyboard are not working.
since i have a report due for tomorrow and now i have no way of getting in to the system.
i'm using a logitech dinovo keyboard/mouse and was trying to figure out if the device is still in boot mode. I don't see the usb hub listed when i hciconfig and i although the udev rules appear to hid2hci, i cant seem to figure out how in the heck i could be paired when i've never went through the process.. lsusb also shows "boot interface subclass" which im guessing means its in bootmode? Im obviously concerned about this because bootmode isnt encrypted.
[Code]....
I just purchased this mouse today. The box brags that one can insert the include AA battery, put the little remote in a USB port, turn the mouse, on, and away you go.
However, it doesn't work. I've gone through the whole troubleshooting guide, which generally consists of silly questions such as "Is the mouse on?"
My previous mouse was a logitech, but it was not wireless. It worked fine. Are there any restricted extras in order to get this beauty up and running? Or should I return it and invest in a more Linux-friendly mouse?
Has anyone used this keyboard: Logitech wireless solar keyboard k750
Does it work in linux? any linux? Multimedia keys? etc...
I have a Logitech VX Revolution, and I would like to change the "search/find" button to be used to middle click as opposed what it currently does, opening a new google tab in firefox. The mouse settings in System Settings does not have a tab for editing what the buttons do. (I thought there should be a Logitech tab, but I guess that is for USB only)
openSUSE 11.2 KDE 4.3.5
So Ive had this issue off and on for a while now, but have never really looked to see if others have had it or how I can fix it. Essentially the problem is that kde seems to randomly decide that I am holding down the shift or ctrl key.Im using a logitech cordless desktop s510, running openSUSE 11.3 x86_64. Ive had this problem on and off using a couple of different logitech keyboards. The most often time when it happens with the shift key is when im coding, and the control key when Im running a keyboard shortcut.
I can usually fix the issue by holding down the key that kde thinks is pressed for like 5-10 seconds and releasing, however sometimes I have to unplug and then replug in the usb adapter for kde to get things right. This doesnt happen if im running a non-graphical terminal (thouhg I cant say whether it happens in gnome as I dont have gnome installed) so I am thinking its related to kde. The keyboard can be plugged into other computers and they dont act the same way.
This gets esspecially annoying when Im coding (because of all the symbols) and generally when the issue occurs. I think it may have something to do with the key being pressed for over a certain length.
I got myself a shiny M305 Logitech mouse for my laptop. It comes with a littlee USB wireless dongle. When I plug in the dongle, DMESG shows me that the system notices the dongle:
usb 5-1: USB disconnect, address 6
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
usb 5-1: new low speed USB device using uhci_hcd and address 7
usb 5-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /class/input/input15
[Code]...
Used to be it worked fine natively in 'direct' mode. I didn't need to do any bluetooth setup, I just booted and it worked in BIOS and in Debian. Then one day after a dist-upgrade it quit. I fussed with it for two days, finally installing the Bluez software and trying to make it work as a true bluetooth keyboard/mouse. That's how it's been for six months.
[Code]...
It will not hardware pair once X is started. I've tried it with the bluetooth service started and stopped. Something is preventing it from pairing.
the Squeeze uprgade I also lost the middle mouse functionaly of my Logitech Marble Mouse. I do not remember how I set it up to be honest. I am not sure if it was by default middle was mouse was "pressing 2 buttons on eachside at the same time" or I did set up manually using Xmod or similar tool. I might have even set up in the hal settings. The reason I do not remember exactly is that I used multiple tuts and places to set this up long time ago and now that the functionality is gone I am kind of confused about how to go ahead about it.
View 1 Replies View RelatedI just did a clean install to wheezy on my desktop (figured it was safe enough) and I found out my preferred keyboard, the Logitech 'Wave' K350, does not work on the wheezy installer. I tested to see if the mouse would work (M510) and it didn't work either. It works (or at least it did a few months ago) fine on the Squeeze installer. why my K350 didn't work on the install. It's just your typical wireless keyboard & mouse combo.The K350 works fine after the install.
View 6 Replies View RelatedI have a Logitech G11 keyboard with additional function keys from G1 to G18 and I added those keys to my XKeysymDB and ~/.xmodmaprc accordingly. According to xev, all those keys are working properly, eg.:
$ xev
...
KeyPress event, serial 35, synthetic NO, window 0x3400001,
root 0x15d, subw 0x0, time 3518287, (167,-33), root:(1501,366),
state 0x10, keycode 175 (keysym 0x15000001, G1), same_screen YES,
XLookupString gives 0 bytes:
XmbLookupString gives 0 bytes:
XFilterEvent returns: False
Now, if I try to bind any of those keys to global shortcuts in KDE I got a dialog telling: "The key you just pressed is not supported by Qt." these keys were working perfectly well in Lenny and KDE 3.5. I did some research, and it really seems that this is a some kind of "feature" in KDE 4.2 or Qt. So, is there any way to fix this easily in Squeeze without switching to Wheezy or even Sid?
I am suffering from the following problem: after updating udev from 125 (lenny) to 151 (squeeze) my wireless keyboard Logitech diNovo Edge totally stopped working (says it is disconnected). If I downgrade back to 125 all works fine again.
View 4 Replies View RelatedI m using wireless keyboard and mouse with my PC. I have installed Win XP and Ubuntu both but I login in one at a time. In windows lower panel shows if my caps lock and numeric lock are on. but this is not so in case in Ubuntu. how to display same in Ubuntu panel.
View 2 Replies View RelatedI am running Linux Mint and Windows 7 in a dual-boot.
I'm looking to buy a wireless mouse and keyboard that has a linux driver. Haven't been able to find any.
When I use the down arrow on my new keyboard it also does and enter key as well. When I use the left and right arrow keys and hold them it doesn't keep going. It just clicks once and I have to pressing it over and over again. Any one know the correct settings to setup my keyboard? It's a Logitech Illuminated Keyboard.
View 2 Replies View RelatedI'm currently running Fedora 14 on an ASUS laptop and I'm looking for a recommended Wireless Keyboard and Mouse.
View 3 Replies View RelatedLooking to buy a wireless mouse/keyboard for my wife. Want one of good quality that will work with Ubuntu 10.04 and is in current production. Even better if its a brand that Fry's or Newegg carries.
View 6 Replies View RelatedI'm about to add a wireless mouse and keyboard to the computer (running opensuse 11.2). Do I just plug them in? Do I have to load any driversDo I keep my wired keyboard/mouse plugged in at first?
View 2 Replies View RelatedI have tried Lucid on two computers. Wireless mouse and keyboard are DEAD. Even the server version (before the desktop is installed) ignores them. If I connect a wired mouse or keyboard they both work fine.
View 2 Replies View RelatedI tried to upgrade from 10.4 to 10.10.Every thing went normal until the grub screen wanted me to select which kernel.The wireless usb keyboard and mouse would not work.I found an old keyboard and mouse, they worked.the login screen popped up, I selected the user name and typed the password.After a moment the login screen pops back up.I can log into the recovery console.
View 2 Replies View RelatedI've troubles with wireless keyboard and mouse on openSuse 11.3, XFCE. The keyboard is A4tech GL100 and mouse A4tech G7-630 working on 2.4 GHz. The mouse after few seconds of inactivity switches off and I have to click to bring it working again. The keyboard is set to CZ, but always after start automatically switched on ENG, I have to go to Yast and open keyboard setup and close even if the CZ is selected to force the CZ layout.
View 1 Replies View RelatedFor some reason I am unable to use either my keyboard or my mouse. No problem in etch up until now, even after rebooting.
View 1 Replies View RelatedAs the title says i have this error on both my main computer and my laptop. For my main computer see this post, that is when it happened. viewtopic.php?f=30&t=65743
I run the updates on my laptop a while ago and decided to restart it to check if everything went okay. It seems not.
The only way i can get on the desktop, is to choose the recovery mode, su to user and startx.
This is a common error during booting on both computers. Starting the hotplug events dispatcher: udevderror binding control socket, seems udevd is already running
It seems a little strange, same error on both computers.
Is there any USB mouse battery indicators for Ubuntu that can tell me the battery level of my Logitech USB mouse? (something like a laptop battery one) I want to add it the panel.
View 6 Replies View RelatedSo it's a beautiful day and I'll be happily using my computer when I realise that the screen is no longer showing that I'm typing or moving my mouse (or finger across a touch-pad). I can leave my computer in this frozen/crashed state for hours. My only recourse is to drain the battery or hold down the power button until the computer shuts down. The computer is a Dell Inspiron 6400 laptop/notebook. As my memory serves, it has an ATI graphics thingy. Radeon 1400, maybe. But I've had the computer for years and this behaviour has emerged only the past couple of months, with seemingly increasing frequency.
The OS is
# uname -a
Linux polaris 2.6.32-trunk-amd64 #1 SMP Sun Jan 10 22:40:40 UTC 2010 x86_64 GNU/Linux
(aka Squeeze?)
Sometimes this happens within minutes of turning the computer on and logging into Gnome. Sometimes this happens only hours after I've started using the computer (mainly just surfing the web). Sometimes it is preceded by a loud boop sound and the following if I have console open, sometimes not. So maybe that's unrelated. But that happened just now so I thought I'd throw it in.
One weird thing: Usually this happens within an hour of starting to use the computer, but one occasion I noticed I had not had the problem for several hours. On that occasion, the only thing I noticed I was doing that was also unusual: I had turned on and forgotten about a kvm virtual machine. After I shut down the vm, I had about only a minute before the freeze. I'm surprised now that it hasn't frozen since I started typing thing. Maybe I should always keep this forum open in a browser window.
A couple of weeks ago I installed a new 4-core Lenovo PC and installed Squeeze on it - keeping it updated every day. When kdm or gnome display the login screen, my USB-connected keyboard and mouse don't react. When I then unplug and re-attach them into the same socket everything ist fine. Surely this can't be working as intended? I can however get into BIOS-Setup as usual during the initial boot-phase by pressing Crtl-S and F1. Things also are fine when selecting the debian version to run from the multi-boot screen.
I am enclosing the kern.log of the last boot below (don't know how to attach files!). In that I can see that on line 530 ist says New USB device found, idVendor=046d, idProduct=c03e (address: 5; optical Logitech mouse) and then on line 542 New USB device found, idVendor=046d, idProduct=c31c (address: 6; keyboard).
It seems to get "interesting again on line 632 etc. with the message usb 2-1.8: USB disconnect, address 6.
-------------------------------------
2.754607] usb 2-1.5: new full speed USB device using ehci_hcd and address 4
2.855589] usb 2-1.5: New USB device found, idVendor=046d, idProduct=0a0c
2.855594] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
2.855598] usb 2-1.5: Product: Logitech USB Headset
[Code]....
I've just installed Debian Testing XFCE, and mouse & keyboard don't respond to any inputs. The keyboard works just fine in the Recovery Shell, that's why I suspect a problem with the XServer.
View 9 Replies View Related