I installed ubuntu (latest version) but I can't use my Logitech MX5500 Revolution Desktop (it uses bluetooth). The problem started right within the installation, I couldn't use mouse or keyboard.
How can this be? I don't think, that it needs additional drivers, it's working fine in the BIOS etc.
Been using Windows 7 for a good while but would love to make a switch over to Ubuntu i installed via WUBI the 64bit of 10.4. The headset is detected and the mic is detected and both work fine but the Dolby 7.1 "effect" does not work at all. Now in Windows a app has to be running for the Dolby part to work. Any thought on how to get that to also work in Ubuntu?
View 9 Replies View RelatedIs there is anyone who owns a wave keyboard who has had any problem with the media keys or regular keys please tell me. I found somethreads about problems with the media key, but I could not fine any recent ones.
View 9 Replies View RelatedDoes anyone know of a variant on the Logitech SetPoint software (it allows more functions for Logitech keyboards and mice) for Ubuntu? Would the Windows version work in Wine? I didn't think it would because the app uses Bluetooth, and I don't know if Wine can do that.
View 2 Replies View RelatedI have a HP laptop which can support 1600x900. But after I install ubuntu 9.10 on it, it can only support up to 1280x700. My laptop has a Nvidia graphics card. And i am using GNOME as my desktop environment.
View 1 Replies View RelatedI'm trying to find out when QME2572 (Qlogic) card became support by the kernel. We have a RHEL 5.1 system that is moving to new hardware, however the kernel at this release doesn't support the new hardware, due to the Qlogic card change. I tired the Redhat KB and Bugzilla. Is there a Kernel change list etc I can search. Never really played around with the kernel too much so I'm just after some pointers for looking up this information. Offically its not supported until Redhat 5.3, I'm trying trying to research kernel info so I can tell the customer they have to upgrade.
View 3 Replies View RelatedI'm looking to dual-boot Windows 7 and Debian 6 upon its release on my sister's laptop. I want to share a partition between the two of them so that /home points to this directory and the Windows equivalent also points to it (C:Users).
Anyway, I've heard good and bad things about the NTFSMount driver (I think it's NTFS-3G now) and the NTFSprogs project and so I am not so certain what I should believe. I do know that NTFS has relatively high overhead, though I do not recall the source of this assertion, so I am considering the use of EXFAT. An open source EXFAT project is hosted on Google Code at [url] and it utilizes the kernel module FUSE.
I'm quite certain that I've got everything covered on the Windows side -- that is, I know that both NTFS and EXFAT will be suitable filesystems for my required usage.
My issue is that I'm curious which will have superior performance and stability in Debian. I planned on building the package from source and mounting the device in my FSTAB but I have also found a PPA for Ubuntu on Launchpad at [url] that I could borrow the debian/rules from and make a .deb package from.
What do you guys think? Should I go at it with the EXFAT or NTFS partitioning? Is NTFS-3G actually fairly supported at this point? Or perhaps should I consider some alternate method?
I have also considered that the only files she will be sharing are those of music, videos, and pictures so it could be better to just link /home/xxxx/Pictures (Music and Videos, too) to the new partition instead of all of /home.
I would like to know if it is possibile to have support for wi-fi midi support in linux.
View 1 Replies View RelatedI installed two apps that were supposed to give me more settings for my mouse. I installed from Synaptic and everything seemed to work fine, but I can't find anywhere to start the apps so I can do the adjustments. where I can find these to run them?
View 4 Replies View RelatedI have a set of logitech r20 speakers that I can't get working. Does anyone know where I can download a driver?
View 2 Replies View RelatedI'm having a very strange problem with my Logitech MX5000. It used to work fine but now I am experiencing some problems.When I start up my PC WITHOUT my spare wired keyboard plugged in, does not type more than one character -I mean only one character- after a random number of key presses (50-100 or more).However, if I start up my PC WITH my spare USB keyboard plugged in, my MX5000 works perfectly.Bluetooth (on) has recognized, installed and connected the keyboard. In fact, now, I am typing this message on MX5000 -with the wired keyboard connected to the PC.
View 1 Replies View Relatedwant to use it with skype. Didn't see a driver online; followed instructions for making changes in vol ctl, didn't see anything wrong.
View 3 Replies View RelatedI'm running ubuntu 10.04 and have a logitech webcam that's a few years old. When I run "cheese" all I see are wavy lines.
View 3 Replies View RelatedSince I upgraded to 11.04 my logitech illuminated keyboard remains illuminated after shutdown In 10.10 the keyboard light would shut off after pc shutdown...
View 2 Replies View RelatedCannot for the life of me get my MX 5500 logitecheyboard/mouse combo to work with 10.04. It worked with 9.10 and 9.04 fine out of the box, but i upgraded my computer to the new version and suddenly it wont work at all. I have tried pairing it with the bluetooth manager to no avail. Did some research and i believe the problem is it wont switch over to CVS mode or something which would let it also work in the bios.
View 9 Replies View RelatedI just upgraded to ubuntu 10.04 and everything is ok except my USB Logitech Headset. The problem is that volume of the device is very low and I can't hear the music or any sound like I use to heard. Even if I increase the volume up to 100%, I still hearing the sound with a very low volume. But if I use the analog output of my sound card I can hear very well. I remember that i used to have this problem in ubuntu 9.10 but I fixed with a script that I found it in this forum, but I can't find it again.
:~$ lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 046d:0a01 Logitech, Inc. USB Headset
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 15ca:00c3 Textech International Ltd. Mini Optical Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 04fc:0c25 Sunplus Technology Co., Ltd SATALink SPIF225A
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
I'm not sure if this is the correct category, but none of the others seemed appropriate. I'm having problems getting multiple usb devices to play nicely together. I'm using the following usb devices:
ralink rt2870 usb wireless
Logitech wireless keyboard - K350
Logitech wireless mouse M305[code]/.....
It was working just fine with 9.10. After upgrading to 10.0.0.4 I' m getting a very low output, almost inaudible.
HTML Code:
I am getting a Logitech Webcam Pro 9000. How do I install it on Ubuntu 10.04 LTS?
View 5 Replies View RelatedI am getting a Logitech Webcam Pro 9000. How do I install it on Ubuntu 10.04 LTS? Isn't there a tutorial for this?
View 3 Replies View RelatedI have two computers--a Zareason machine (no details yet) running 8.04. I also have a Dell 1525N laptop running 9.10. I purchased recently a Logitech QuickCam Pro 9000 Webcam. The video works on both systems with Ekiga and Cheese. I can also see the video in Flash applications (but *not* in Meebo even with the other person logged into Meebo). (Both computers are running the latest Flash plugins).
However, the built-in microphone is problematic. With 8.04, I get playback when I test it under System|Preferences|Sound--but with lots of echo. But I get no sound with any Flash chat applications. I've not been able to test it with Ekiga as the testee (a Windows 7 user) can't get Ekiga to work on his machine (probable Windows firewall issues). I haven't installed Skype because Skype pulled its 8.04-compliant .deb packages and I've not tried yet to compile it from source code.
With 9.10, the webcam works with Cheese (video) and I can get both webcam and mic to work with Skype. (Again, no test result possible for Ekiga until I get a testee). However--my Win7 testee friend says that when I log into Googlechat using Pidgin on my 9.10 laptop, a webcam icon appears next to my userID telling him that I have an open webcam (even when there's NONE actually plugged in). He doesn't see the same icon when I log into my 8.04 desktop with no webcam plugged in. I have searched Pidgin and my System preferences and see no evidence that any of these applications or my system sees a webcam that's not there.
So--how to get the mic to work? (I am thinking the simplest answer will be to simply upgrade my desktop to Lucid). And also, why the webcam icon in Googlechat even when no webcam is plugged in on my 9.10 laptop??
My goal is to be able to use my gamepad as a normal mouse, and also have some of the keys configured to open certain programs or do other things. Does anyone have any advice on what I need to install or if this is possible?
View 1 Replies View RelatedIn a development project currently going on, we do plan to use an usb steering wheel for controlling an system by using its input. The device used is a "Logitech G27 Force Feedback Racing Wheel", which also has three pedals and a clutch, both connected to the steering wheel device itself and then to the pc using an usb connector.For i'd love to use ubuntu to connect that input controller, i'd like to know, if it is possible to read that devices inputs to the system using ubuntu linux. Important: It is not necessary to have a working driver that could be used in any games (e.g. TORCS), i only have to get the controller's outputs [and maybe set force feedback].I already did some searches on the www, but failed in finding any appropriate information on this topic.
View 1 Replies View RelatedJust found my old Logitech webcam again, and tried to get it to work on 10.04. Somehow this doesn't work. I tried searching the forum, but did not get an answer to my situation.
Here is what I can see:
After connecting (or rebooting), dmesg shows the following lines
uvcvideo: Found UVC 1.00 device <unnamed> (046d:08cc)
input: UVC Camera (046d:08cc) as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/input/input5
usbcore: registered new interface driver uvcvideo
And that's it. No message that cam was registered to /dev/video<x>. I should add that I already have another cam (Philips) that works and is registered to /dev/video0, and I also installed a Hauppauge PVR350 card that also gets registered to various /dev/video<y> files. Why the Logitech cam won't register? I'm guessing I can't do anything until this cam has its own /dev/video<x>, right?
I have logitech USB speakers with remote i couldn't find drivers on logitech website
i don't know how to make them work
So i installed Linx 10.4, and attempted to get my webcam to work...
nothing at all!
It's a Logitech C200, webcam!
I'm trying to get my Logitech webcam to work. I don't know the exact model but it's a round globe.
Lsusb says-
Bus 002 Device 004: ID 046d:08f5 Logitech, Inc. QuickCam Messenger Communicate
I've tried Cheese, VLS but no video as of yet.
What I'm trying to do is set up my quickcam to stream video to a web page for zone minder to pick up. If that makes any sense.
Here is the error that I'm getting:
Code:
libavutil 50.15. 1 / 50.15. 1
libavcodec 52.72. 2 / 52.72. 2
libavformat 52.64. 2 / 52.64. 2
[Code]....
I upgraded recently to Ubuntu 11.04 and have been trying unsuccessfully since to use an old webcam: Logitech Quickcam Messenger. The system doesn't recognize it at all as far as I can tell, which it did on 10.10 (I didn't really use it then, I just remember I could get a picture at some point.
View 1 Replies View RelatedI found my web cam it is a Logitech Express cam I just want to know how to get the driver so I can use it in Firefox for like tinychat it works for cheese fine but That doesn't mean that it works for my web browser?
View 1 Replies View Related