About 5 years ago I bought a Logitech wireless keyboard. I want to add a wireless mouse now. Logitech has no docs on its website for the keyboard or receiver. Does anyone know how to figure out whether any mouse I buy now will be compatible with my old receiver? I know that all wireless mice come with receivers, but I have limited USB ports.
View 3 RepliesI use a set of keyboard + mouse Logitech MK330. So, they are wireless in five minutes of inactivity have to sleep. But sleep only the keyboard. The mouse does not fall asleep. On distro Ubuntu and Windows goes into standby mode, both devices. How can I fix it to Debian?
During installation Debian distro, mouse goes to sleep, but on the installed system will not go into standby mode.
I've just upgraded from karmic to 10.04. After rebooting my system everything seems to work fine except my mouse and keyboard are not working.
since i have a report due for tomorrow and now i have no way of getting in to the system.
i'm using a logitech dinovo keyboard/mouse and was trying to figure out if the device is still in boot mode. I don't see the usb hub listed when i hciconfig and i although the udev rules appear to hid2hci, i cant seem to figure out how in the heck i could be paired when i've never went through the process.. lsusb also shows "boot interface subclass" which im guessing means its in bootmode? Im obviously concerned about this because bootmode isnt encrypted.
[Code]....
I just purchased this mouse today. The box brags that one can insert the include AA battery, put the little remote in a USB port, turn the mouse, on, and away you go.
However, it doesn't work. I've gone through the whole troubleshooting guide, which generally consists of silly questions such as "Is the mouse on?"
My previous mouse was a logitech, but it was not wireless. It worked fine. Are there any restricted extras in order to get this beauty up and running? Or should I return it and invest in a more Linux-friendly mouse?
Has anyone used this keyboard: Logitech wireless solar keyboard k750
Does it work in linux? any linux? Multimedia keys? etc...
I have a couple of Logitech wireless mice (M325) with USB Unifying receivers, one for a couple of netbooks (Asus & HP) and one for my old desktop. These have been working very nicely
under 32 bit OSs :-
Windows XP
Debian testing (Wheezy & Jessie)
I now have a new 64 bit desktop (Intel i5) and the Logitech mouse
DOES work with :-
The Bios
Windows 7
But it does NOT work with :-
Debian Jessie
I have found an old mechanical Sun 3 button mouse (USB), which has got me
working to some extent, but does remind me why I got an optical wireless mouse!
My old 32 bit desktop reports :-
Code: Select all$ uname -a
Linux copper 3.10-2-686-pae #1 SMP Debian 3.10.7-1 (2013-08-17) i686 GNU/Linux
Code: Select all$ lsmod | grep hid
hid_logitech_dj 13054 0
usbhid 36040 0
hid 64702 2 usbhid,hid_logitech_dj
usbcore 110348 4 uhci_hcd,ehci_hcd,ehci_pci,usbhid
[Code]....
I need to get the comparative info off the new desktop, but I am currently hampered by the old mouse and the bug, whereby when I asked for the LXDE desktop I also got Gnome installed, and Lightdm ignores my request to start LXDE and dumps me in Gnome!!
The main differences that I have found was in the modules where the 32 bit one uses uhci_hcd, while the 64 bit one uses xhci_hcd. The dmesg section is like the above, finding the Unifying device, but is missing the last line where djdevice finds the mouse..
I have a Logitech VX Revolution, and I would like to change the "search/find" button to be used to middle click as opposed what it currently does, opening a new google tab in firefox. The mouse settings in System Settings does not have a tab for editing what the buttons do. (I thought there should be a Logitech tab, but I guess that is for USB only)
openSUSE 11.2 KDE 4.3.5
So Ive had this issue off and on for a while now, but have never really looked to see if others have had it or how I can fix it. Essentially the problem is that kde seems to randomly decide that I am holding down the shift or ctrl key.Im using a logitech cordless desktop s510, running openSUSE 11.3 x86_64. Ive had this problem on and off using a couple of different logitech keyboards. The most often time when it happens with the shift key is when im coding, and the control key when Im running a keyboard shortcut.
I can usually fix the issue by holding down the key that kde thinks is pressed for like 5-10 seconds and releasing, however sometimes I have to unplug and then replug in the usb adapter for kde to get things right. This doesnt happen if im running a non-graphical terminal (thouhg I cant say whether it happens in gnome as I dont have gnome installed) so I am thinking its related to kde. The keyboard can be plugged into other computers and they dont act the same way.
This gets esspecially annoying when Im coding (because of all the symbols) and generally when the issue occurs. I think it may have something to do with the key being pressed for over a certain length.
I got myself a shiny M305 Logitech mouse for my laptop. It comes with a littlee USB wireless dongle. When I plug in the dongle, DMESG shows me that the system notices the dongle:
usb 5-1: USB disconnect, address 6
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
usb 5-1: new low speed USB device using uhci_hcd and address 7
usb 5-1: configuration #1 chosen from 1 choice
input: Logitech USB Receiver as /class/input/input15
[Code]...
I m using wireless keyboard and mouse with my PC. I have installed Win XP and Ubuntu both but I login in one at a time. In windows lower panel shows if my caps lock and numeric lock are on. but this is not so in case in Ubuntu. how to display same in Ubuntu panel.
View 2 Replies View RelatedI am running Linux Mint and Windows 7 in a dual-boot.
I'm looking to buy a wireless mouse and keyboard that has a linux driver. Haven't been able to find any.
When I use the down arrow on my new keyboard it also does and enter key as well. When I use the left and right arrow keys and hold them it doesn't keep going. It just clicks once and I have to pressing it over and over again. Any one know the correct settings to setup my keyboard? It's a Logitech Illuminated Keyboard.
View 2 Replies View RelatedI'm currently running Fedora 14 on an ASUS laptop and I'm looking for a recommended Wireless Keyboard and Mouse.
View 3 Replies View RelatedLooking to buy a wireless mouse/keyboard for my wife. Want one of good quality that will work with Ubuntu 10.04 and is in current production. Even better if its a brand that Fry's or Newegg carries.
View 6 Replies View RelatedI'm about to add a wireless mouse and keyboard to the computer (running opensuse 11.2). Do I just plug them in? Do I have to load any driversDo I keep my wired keyboard/mouse plugged in at first?
View 2 Replies View RelatedI have tried Lucid on two computers. Wireless mouse and keyboard are DEAD. Even the server version (before the desktop is installed) ignores them. If I connect a wired mouse or keyboard they both work fine.
View 2 Replies View RelatedI tried to upgrade from 10.4 to 10.10.Every thing went normal until the grub screen wanted me to select which kernel.The wireless usb keyboard and mouse would not work.I found an old keyboard and mouse, they worked.the login screen popped up, I selected the user name and typed the password.After a moment the login screen pops back up.I can log into the recovery console.
View 2 Replies View RelatedI've troubles with wireless keyboard and mouse on openSuse 11.3, XFCE. The keyboard is A4tech GL100 and mouse A4tech G7-630 working on 2.4 GHz. The mouse after few seconds of inactivity switches off and I have to click to bring it working again. The keyboard is set to CZ, but always after start automatically switched on ENG, I have to go to Yast and open keyboard setup and close even if the CZ is selected to force the CZ layout.
View 1 Replies View RelatedIs there any USB mouse battery indicators for Ubuntu that can tell me the battery level of my Logitech USB mouse? (something like a laptop battery one) I want to add it the panel.
View 6 Replies View RelatedSince I upgraded to 11.04 my logitech illuminated keyboard remains illuminated after shutdown In 10.10 the keyboard light would shut off after pc shutdown...
View 2 Replies View RelatedMy goal is to be able to use my gamepad as a normal mouse, and also have some of the keys configured to open certain programs or do other things. Does anyone have any advice on what I need to install or if this is possible?
View 1 Replies View Relatedi am trying to use my logitech gamepad as a mouse using js2mouse. It is not working.
i am running suse 11.2
I have downloaded and installed js2mouse with no errors. when i run it i get:
# js2mouse
Number of axes : 6
Number of buttons : 12
Driver version : 131328
Joystick name : Logitech Logitech Dual Action
[Code].....
i dont get any errors form the terminal, but it does not work.
I found this:Software.openSUSE.orgIt's supposed to make G keys work and make them programmable, but i don't know if it'll work for G11 keyboard...Did anyone manage to get the G11 macros to work in Linux?I'm using openSUSE 11.2. 64 bit.I tried searching in YAST for some drivers or something, but couldn't find anything...
View 1 Replies View RelatedKeytouch assignments do not take with Logitech Access keyboard. E.g. I have set MyHome key to run <firefox> but it runs a file browser instead. E-Mail works, but that's about all. None of the multimedia keys work.
View 2 Replies View RelatedI just got the logitech M555b BT mouse for my pavilion dv6500. how to get it working.
View 2 Replies View RelatedI have a question about making this device working properly on Fedora 15.
On Ubuntu worked when adding to /etc/X11/xorg.conf this section:
But making this on Fedora don't allow to boot at all.
Here is my xorg.conf on Fedora 15 now(which is default):
How do I have to change this file?
I'm using the Logitech MX1100 mouse which has a quite a few buttons. (10) I would like to use 2 of them for volume control (as I do for Windows) but have no idea how to in ubuntu 9.10. Is there any way I could map the buttons to control volume? I'm a minor noob so keep it simple.
View 9 Replies View RelatedI need to download the driver so that I can get the buttons to work on the mouse. I couldn't find any driver for ubuntu. What can I do?
View 9 Replies View RelatedI just bought a usb logitech LS1 laser mouse, plugged it in restarted ubuntu 10.10 and its not working.
Where can i change the mouse?