Is it possible to connect remotely to a Windows PC from Ubuntu.I know these people that are constantly receiving Malware on their PC's and when I'm around. The problem is, they are over 200 Miles away, and I won't be in the area until a very long time. Would it be possible to connect to their PC remotely with Ubuntu and remove their viruses via ClamAV?
View 7 Replies
Our servers use Red Hat Enterprise Linux 5 (Tikanga). I would like to remote into the server to install PHP, Apache, MySQL.How can I do that from Windows?How can I do that from Linux? Which Linux distribution is the best for this purpose?
View 2 Replies View RelatedI'm new to linux, and setting up the mysql database server.
Here are my situation:
OS: CentOS 6
mysql version: 5.5
I tried to use MySQL Administrator to connect to my database on the host 192.168.1.120
and my computer is under the same network with ip: 192.168.1.105
But it shows the error msg: Could not connect to MySQL instance at 192.168.1.120
Error: Can't connect to MySQL server on '192.168.1.120'(61)(code 2003)
On the server side I've tried:
Code:
skip_networking is off and I've set the port for it.
When I check the process in OS:
Code:
When I try netstat:
Code:
I thought it's the problem of firewall, so I have check it also:
Code:
i have been struggling with setting up a VNC connection between my Ubuntu laptop and my Vista desktop. I am trying to remotely access the Vista desktop using my Ubuntu laptop. I have forwarded port 5900 to my Vista desktop, and attempted connecting to (VistaLocalAddress):5900 using Vinagre. Sadly enough, it instantly returns "Connection Closed."
I have tried setting up some sort of remote access in a similar manner about 3 times in the past, finally i just made a forum account and created this thread in a plea for help.
PS: I forgot to mention that the Vista desktop has allow remote connections ENABLED.
I've been looking for a way to use my laptop (running Ubuntu) to help service a remote laptop (running Windows XP). I've used TeamViewer and Cisco's VPN Client before, but TeamViewer is Windows only, and I don't want to pay for a Cisco system just to help maintain my friend's computer.
Ideally, I'm looking for something similar to the programs listed above, but I really just want to know if any of you have done this before, and if so, how?
I want to access linux server remotely from windows. I precisely dont need GUI. Just want to work with vim editor. currently I am using ssh software and xmanger software.Running ssh software dosen't give the feel and speed. However xmanager is fine to work. Can somebody suggest me from where i can get free latest xmanager software or better then it.
View 11 Replies View RelatedIs it possible to access remotely Linux from windows xp.
View 4 Replies View RelatedI am having problems printing from a terminal emulator from a windows workstation to a red hat printserver. I am using a program called Termlite to connect to the red hat server to access the application I am trying to run.
All other applications can print properly on red hat machine except this particular application that I am running from Termlite.
Does anyone know or recommend some software or a script to remotely power on a PC from standby to on, or even better from completely off?
I guess the completely OFF to ON is much more complicated - would probably require an extra piece of hardware(?)
I'd like to have my Linux box (a QNAP TS-210 NAS) send the order to go to sleep (or hibernation) to my main Windows 7 computer.As the NAS is running Linux, I can't use psshutdown from SysInternals' PsTools. Is there any Linux equivalent? Or some "magic packet" that can order the Win7 computer to sleep.I know I could install a SSH daemon and trigger a shutdown command from the Linux box using ssh, but ideally I do not want to install anything on the Win7 computer. I can install Linux software on the NAS, no problem about this. PHP, python and perl are also available on it.
View 3 Replies View RelatedI'm using Window-XP and need to remotely connect to a CentOS-5.X server.
UPDATE: I'm looking to visually, securely and with as small a footprint as possible manage a remote Linux system via an GUI. It's not clear to me if Linux has a default method for streaming the desktop. Before installing something on the remote Linux system, is there a grep or find I should run to see if there's existing support on the computer? looked at Xming, but couldn't tell what it's doing; meaning if like WinSCP it's just creating an interface on my end and running CMDs remotely, or if it's streaming the desktop.
Debian5.0
Windows server 2007
Windows Vista
WAN - public IP or Internet
I'm looking for a reliable solution to remote-admin Windows server and workstation on Linux workstation. I have been running ssh for sometimes to remote-admin Linux/Unix servers on Linux workstation. Google brought me following links; OpenSSH for Windows
[URL]
OpenSSH on Windows v3.4-3
[URL]
How to install OpenSSH sshd server and sftp server on a Windows
[URL]
The project OpenSSH for Windows seems coming to a stop.
me using redhat linux.i want to to remotely access a system that have windows OS.I tried to install the utility rdesktop using following command. "yum install rdesktop" the following error occur
"Loading "security" plugin
Loading "rhnplugin" plugin
This system is not registered with RHN.
[code]....
I have a java application running under Linux (Suse). My application communicates with a windows service via TCP/IP. I had multiple cases where the windows service crashed and I'm wondering if in such case there is any Linux or java tool I could use to remotely restart this Windows service.
View 2 Replies View RelatedI have been working on this problem for a few month. By messing with windows registry and local security policies I was able to remotely shut down windows from Linux by issuing:
Code:
net rpc SHUTDOWN -C "comments" -f -I xxx.xxx.xxx.xxx -U username%password
But now I am wondering how to force windows into sleep or suspend remotely from Linux.
It seems that there is no "net rpc SUSPEND" or "net rpc STANDBY" option available.
how to perform such remote operation?
I need to copy file from my Windows XP system to remote Linux system.
Win location : c:1.txt
LInux location:/tmp
What should be the command?
EDITED: pscp is recognized and OK on my PC.I CAN connect with Putty to this remote Linux PC remote Linux name is s1,hostname is s1host
I tried transfer file with following command:
pscp C:1.txt s1@s1host:/tmp
Got:Fatal: Network error: Connection timed out
It's not clear,is command isn't ok?
I have been trying to shutdown a remote XP machine but cannot get it to budge. I did the following on the Windows box:
Ensured no firewall
Started Remote Registry Editing service
Shared a network drive (to enable file sharing?)
Created a user 'shutdown' specifically for shutting down
Added 'shutdown' to Administrators group
Added 'shutdown' to the list of allowed shutdown users in gpedit.msc
Here's what I have tried:
From Windows 7 box:
shutdown -m computer (Access denied message)
psshutdown -m computer (Access denied message)
runas /user:computershutdown "cmd /K shutdown -m computer (access denied)
runas /user:shutdown "cmd /K shutdown -m computer (access denied)
From Linux box:
net rpc shutdown -I computer -U user%password (says shutdown succeeded) rpcclient -I x.x.x.x -c shutdown -U user (gives usage message)
Is it possible to execute a perl script which in a linux machine from a windows machine?I have to trigger its execution from my windows machine.
View 1 Replies View RelatedI've been spending sometime trying to setup anclient on windowso access my fedora serverI'm currently using xming but there's no way whatsoeverme to make gnome available remotely. The closest I got was to open a standard X session with no icons but just a terminal.Is there any quick sanity check I can do before spending more time on this
View 2 Replies View RelatedI wanted to setup a Samba share on a box running Ubuntu 10.4 and share it to Windows 7 computers throughout my house. When I browse the Network (thru Windows), I can see "Media Devices" that correspond with the locations of where I will put the media. The problem is that I have been unable to copy the media to the Ubuntu server because I cannot see the Ubuntu "computer" from Windows 'Network'.
All computers are on the same Workgroup
Running the following command line from Windows returns no errors and lists the samba share:
Using the testparm command on my smb.conf returns only one error (which previous googling seems to indicate is not an issue). The following is what was returned by the command:
Code:
I'm not terribly new to Linux, but I am new to the forums, so hear me out! I am in the process of creating an electronic mapwall for our meteorology program, and have designed the computing system from scratch. I have two Linux Boxes, each with capabilities for 6 attached monitors...a total of 12 displays driven from two machines. My intention is to have one machine be the master...it has a touchpanel control. The inputs to the touchpanel will then trigger events for the both the master and the slave machine to display. Each of them has a specific IP address (DNS entry), and are not on a subnet.
Now...is there a way to remotely login to the slave machine and have it display on it's OWN monitors? The code is Java and which works on the master machine to animate directories of .gifs for each of the master's attached monitors. I will most likely have Java execute shell commands for the remote login (ssh), but I believe the answer lies somewhere in the X-configuration. Do I have the machines in an adverse configuration (creation of a subnet would be better)? Lots of questions...lots of desire...few answers!
I run Fedora 13 on my HP dv6000 Pavillion. I am looking for a way to remotely access my work station running Windows XP from my Fedora machine. Most of the information I found explained how to access a Linux box from a Windows environment, and the one place I found that showed the other way around was incomprehensible.
Our company servers run Windows XP, and we have successfully installed remote desktops on other laptops running Windows.I thought of running the remote desktop from a Virtual Machine Windows session, but it seems a cumbersome way to do it.
I am new to Xen Hypervisor and wanted to know if someone has any good guides to configuring it please. Also once i configure a Guest OS how can i connect to it remotely via a windows and linux machine?
View 1 Replies View RelatedI can ssh to the server but it wont allow me edit files, even though I have basic text editors like gedit and notepad installed on my windows computer. Anyone have an idea what the problem is? (I get an error message like this-(gedit:23978): Gtk-WARNING **: cannot open display
View 3 Replies View Relatedwant to connecting between ubuntu 10.10 and windows XP.There are a lot of file , music , movie..etc in my laptop. this is XP other laptop has ubuntu system.want to file transfering with cable each other.
View 2 Replies View RelatedIm trying to get vnc working over ssh between my windows pc and ubuntu server 11.04 natty over the internet. I have setup everything and got it all running automatically at boot on ubuntu. From within the local network i can use ssvnc and connect from a 2003 server to the ubuntu machine fine. Remotely I can connect and verify password over ssh but after that it tries to start tightvnc and fails. The issues seem to be on the windows side establishing the local connection to the tunnel or something I'm not a guru and I apologize if this is a windows issue but i think its likely that its a networking problem i need to forward or open a port somewhere but i cant find any easy to understand instructions so far in getting this running
This is the output in the putty terminal after running ssvnc slightly modified ive taken out my real username and server address I use user@server:0 as the arguments for ssvnc
Code:
Looking up host "server"
Connecting to server-ip port 22
Server version: SSH-2.0-OpenSSH_5.8p1 Debian-1ubuntu3
We claim version: SSH-2.0-PuTTY_Release_0.60
Using SSH protocol version 2
[Code]...
Does anyone have any ideas why the connection fails at the point of using the tunnel? is it a problem on the ubuntu or windows side?
I actually have two problems (which may be related). I am running Ubuntu 10.04 on a old Fujitsu-Siemens Amilo La1703 and Windows 7 on a new Dell Inspiron 1545. I only have one broadband internet dongle, so I would like to share the connection (preferably via wireless ad hoc connection, but lan would work too). The dongle is run with a program that comes with it and works fine in both Windows and Ubuntu (except that the Network Manager in Ubuntu doesn't realise that there is an internet connection).
Yesterday morning I managed ONCE to make a wireless ad hoc connection and was able to use the dongle connected on the Windows machine from the Ubuntu one (using WEP security). Since I wasn't able to reproduce this I tried with a Ethernet cable. I plugged it in and and was surfing smoothly the whole evening.
This morning I couldn't connect the computers any more. Neither with nor without cable. When the cable is plugged in the Ubuntu machine recognises a connection, but fails to connect. The windows machine just says "Unidentified Network". I don't know what I did to make the connection disappear or why my laptops refuse to communicate like friends any more. I've been trying the whole day to make them kiss and make up, but they are really stubborn.
Sometimes I am unable to connect to my WEP network in ubuntu. No matter how many times I try, even restarting, it will not allow me to connect. However if I boot into XP, I can connect to the network. Then when I reboot again and then try in Ubuntu again, it will work.
Router is a Netgear MR814v2
I have an Ubuntu server with some shares and a Windows XP client in an active directory, i've created all the right accounts but can't seem to connect my linux box from the XP machine wouldn't the user name box popping up with ACTIVEDIRETORYNAMEusername like that? hope that makes sense, the account to access the share is locally created on the linux box?
View 4 Replies View RelatedI have 2 computers, one running Windows 7 (and connected to my router wirelessly) and another running the latest Ubuntu Server version and I am just wondering, since I've already got the windows machine to share the internet connection via their LAN connection, how would I get the Ubuntu to use it?
View 8 Replies View Related
