General :: Error While Building A Package
Nov 9, 2009while building a package i got this error. Package name is python-gnomecanvas and i am working in debian.
I am not able to get it correct.
ADVERTISEMENT
General :: Building RPM From Source (Binary Package)
Apr 15, 2010I have this source.tar.gz, I unpack it and cd into it, then I
Code:
$mkdir build
$./configure --lots-of-options --prefix=$PWD/build
$make
$make install
So I have inside my build folder, 4 folders, usr, lib, man, share. How do I convert this into a binary rpm package...?
General :: Building Deb Package For 64bit Ubuntu 10.10
Feb 23, 2011I am trying to build a deb package and I am lost. I was trying to follow this tutorial [URL] and I am not sure what kinda of package this should be. The driver is [URL].
View 4 Replies View RelatedUbuntu :: Kernel Building Error Kernel-package=12.032
Oct 5, 2010I installed ubuntu on my laptop recently and would like to have trim support. (Because I have a ssd drive (crucial c-300 256gb). The current kernel that I am using is the 2.6.32 (standard lucid kernel I believe). Unfortunately TRIM support is only available from 2.6.33 and up. So I thought I'd install a new kernel using this howto:
[Code]....
CentOS 5 :: Building RPM Package With Specific Noarch Sub-package
Feb 3, 2011I was building yesterday the boost-1.45.0 RPM package for CentOS 5.5.
View 3 Replies View RelatedUbuntu Networking :: Broadcom On 2.6.34 - Reinstall Error Code: Reading Package Lists ... Done Building Dependency Tree Reading State Information
May 20, 2010i installed kernel 2.6.34 to fix my lid closing issue, and that went great. but now when i go to reinstall my broadcom i get this error. Code: Reading package lists... Done Building dependency tree Reading state information... Done bcmwl-kernel-source is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. 1 not fully installed or removed. After this operation, 0B of additional disk space will be used. Setting up bcmwl-kernel-source (5.60.48.36+bdcom-0ubuntu3) ... Removing old bcmwl-5.60.48.36+bdcom DKMS files...
[Code].....
General :: Error Building Kernel 2.6.36
Nov 2, 2010I tried to build linux-2.6.36 but I got this error message
Code:
I looked into gcc-version.sh but the problem is located somewhere else I thought at first one of the files might have been corrupted and I downloaded the archive again.
I must also say that this happened in different versions of slackware (the distro I use): 12.0, 12.1, 12.2, 13.0, 13.1
General :: Error While Building A 3-node Cluster ?
Jan 6, 2010I'm building a 3-node cluster. I have created ocfs filesystems and mounted them on the first two nodes. But while mounting them on the third node , i'm getting this error for 8 of the total luns. all these 8 luns are of 1GB size.
I've unmounted these 8 luns from the other node and tried to mount in the third node ... and then it was working and again the error occurs in the second node. My observation was for some reason these particular luns are not allowing the third node.
mount.ocfs2: Invalid argument while mounting /dev/mapper/voting1 on /voting1. Check 'dmesg' for more information on this error.
dmesg output was :
I'm using RHEL 5.4
Software :: Can't Install GTK Gui Building Package?
Mar 17, 2010i am using fedora-10,wants to install GTK+-2.18.7 or,so that i can built gui in 'C'.After several tries and installing needed libraries could not make it out.can any one give me full list of required librariescessary procedure to install them in sequence.From where i can find the full package of these libraries.
View 7 Replies View RelatedDebian :: Building A Current Ffado-svn Package?
Mar 13, 2011I am currently working on making a audio interface work with a otherwise working debian desktop (its actually AVLinux, but its Debian for all intents and purposes). The problem is, the current version of ffado-svn installed (1949, from the experimental repository) has a bug with the firmware on the interface (an Echo Audiofire8) preventing me from using high sample rates, so I need to install a more recent version of ffado-svn.I am wondering if there is anyway I can build a current version of ffado-svn into the appropriate debian packages. While I am not familiar with debian, I am familiaux (I use Arch regularly). I have tried messing around with downloading the svn source and downloading the source files from however, my lack of knowledge of the building process in debian has rendered me unable to have success so far.
View 3 Replies View RelatedSoftware :: Building A Package With Check Install?
Oct 7, 2010I am trying to build something with checkinstall but it is throwing this error message -
Code:dpkg-deb: parse error, in file '/var/tmp/tmp.tZtdRb9biy/package/DEBIAN/control' near line 3 package 'eina': field name `System' must be followed by colon make install works fine, but I would like a .deb to be built.
Software :: Package Building Spec Files?
Jan 12, 2011I am interested in package building rpms, just stumped on how packagers such as remi and atomic rocket get their spec files. Are these written from other packagers or do you need to write each spec file yourself to be considered as a "packager".
View 1 Replies View RelatedDebian Programming :: GCC Freezes When Building Package On Raspberry Pi
Apr 27, 2014I'm trying to compile a project on my raspberry pi with little success. I typed export DH_VERBOSE=1 and added -v to the gcc options in the Makefile to see what was going on and this is the output. I'm trying to compile hda-jack-retask to get the raspberry pi headphone jack set to be a microphone jack. I want to be able to use the microphone jack as the input to xoscope, an oscilloscope program.
Code: Select allpi@raspberrypi ~/~diwic/+junk/hda-jack-retask $ dpkg-buildpackage
dpkg-buildpackage: source package hda-jack-retask
dpkg-buildpackage: source version 0.20120113
dpkg-buildpackage: source changed by David Henningsson <david.henningsson@canonical.com>
dpkg-buildpackage: host architecture armhf
dpkg-source --before-build hda-jack-retask
[Code] ....
And it sits here for at least 24 hours. Alternatively, It looks like this program is part of the alsa-tools package in Ubuntu, but not in Debian. Need to figure out this freezing issue, should I pull down the Ubuntu source and build a debian package from that?
Fedora :: Glib Package Building Stops - Missing GTK2 Dependency
May 11, 2011I'm trying to work with the pcsx2 dev to compile on fedora 86_64. [URL]. Unfortunately I seem to be missing a gtk2 / glib package as building stops with:
Scanning dependencies of target CDVDiso 47% Building CXX object plugins/CDVDiso/src/CMakeFiles/CDVDiso.dir/CDVDisop.cpp.o In file included from /home/mythtv/pcsx2-read-only/plugins/CDVDiso/src/CDVDisop.cpp:11:0: /home/mythtv/pcsx2-read-only/plugins/CDVDiso/src/Linux/Config.h:32:21: fatal error: gtk/gtk.h: No such file or directory compilation terminated. make2?: plugins/CDVDiso/src/CMakeFiles/CDVDiso.dir/CDVDisop.cpp.o? Error 1 make1?: plugins/CDVDiso/src/CMakeFiles/CDVDiso.dir/all? Error 2 make: all? Error 2
I have gtk2-devel.i686, glib-devel.i686 and all the other dependencies afaik - How do I get yum to tell me which gtk* packages are installed for instance...?
Slackware :: ORBit2 Slackbuild Fails When Building 32 Bit Package On Current Multilib
Apr 10, 2010I am trying to build ORBit2 as a dependency for GConf and then google-chrome.
This is a multilib system and I want 32 bit chrome.
Both my 64 bit and compat32 packages are all current as of today per ftp://slackware.mirrors.tds.net/pub/slackware/.
I have edited the Slackbuild as follows:
Code:
The build fails each time with:
Code:
I am using the newest version of ORBit2 as the above indicates, but this is just to see if the newer package would build. The X.X.17 version failed with the same output.
I have run:
Code:
I've had no problems building this package with current in a pure 64 bit environment.
General :: Getting The Package Name That Contains A Library - Error "No Package Gthread-2.0 Not Found"
Jan 22, 2011Fedora 14 I recently went to install some software using the source files. When I ran the command ./configure I got a message saying that No package gthread-2.0 not found After searching the internet some one had the same problem. I needed to install a package called glib2-devel However, rather that searching the internet. Is there any yum command that can give me that information?
View 2 Replies View RelatedGeneral :: Error In Building "c" Code Using Gcc 2.95.2?
Apr 18, 2011Trying to build C source code using Gcc 2.95.2 and Solaris make for the x86 platform. Got the a following error
/usr/local/bin/gcc -c -D_KERNEL -DSUNDDI -I. -Wall -Wstrict-prototypes
-Wmissing-prototypes hdrcpci2_mini.c
In file included from /usr/include/sys/varargs.h:50,
from /usr/include/sys/systm.h:58,
[Code]....
Is this a gcc compiler problem or due to some missing macros?
Installation :: Binutils Error Building ?
May 18, 2010I'm trying to port binutils to a new architecture. I have changed and created necessary files for this. The configure commad run succusfuly. but when I tried to run make I find probems. the error msg is:
View 1 Replies View RelatedDebian :: Building Live CD And Getting - Error
Jul 30, 2010I am currently working on Debian based Operating System, and my objective is to make a live CD.
I ve followed the specified steps to buid a live CD, and finally I ve made an .iso file too.
Now,I am facing some issues to execute that .iso on Qemu(Virtual Interface),those are:
1. While builing it into an .iso,I skipped the md5sum step, is that mandatory to be built for making a live CD?
And when I am trying to make an MD5SUM using the following command, Its giving me the following error:
Kindly specify me, where exeactly the error in the command for creating the md5sum?
2. While executing the .iso file in Qemu using the following command :
And the I am able to watch the Operating System booting initialization and then when I select the option as "Install as Live CD" Its giving me the following error:
I request who ever reads this thread, please send me some kind of a response.I'll be thankful to them.
Software :: Error In Building Dspace ?
Mar 17, 2009I get the following error when i build dspace.
View 1 Replies View RelatedSlackware :: Error Building Gtk+-2.22.0 From Source
Jan 5, 2011I tried building but got errors at the end.
make: *** No targets specified and no makefile found. Stop.
Slackware :: Lilypond Error When Building
Oct 1, 2009I've just tried to compile lilypond using a fresh SlackBuild from slacky.eu site.
I have all deps and I use current Slackware that was gradually upgraded using all current packages since version 12.2. So I call it "version 13".
After a minute or so I got this ugly sentence:
Debian :: Building Firefox-3.6 - Ends With Error ?
Mar 19, 2010I,m trying to build firefox-3.6 from source but it ends with the following error :
Using Debian lenny.
Ubuntu :: Conifgure Error While Building Empathy
Jul 13, 2010I recently wanted to build Empathy 2.31 from a source tarball (after having installed all the dependencies listed on the Empathy website).I got the following error while launching ./autogen.sh:
Code:configure: error: glib-compile-schemas not found.After some googling to try to fix this problem, I've found a thread on these forums. It was saying install libglib2.0-dev an then install (or remove) gnome-shell.I tried every solution I've found but nothing works, still got the error.Does anyone here succeded in compiling Empathy from source please?
Ubuntu Installation :: Error While Building Nautilus ?
Mar 29, 2011Downloaded Nautilus source to patch for transparent background.
Patching went well and fine.
During building I received this:
Code:
Red Hat / Fedora :: Boot Error After Building New Kernel
Nov 19, 2009I am using Centos 5 with an old kernel. I want to build the latest version for atheros 5K wireless drivers. So i downloaded, and compiled with the ".config" which is already in /boot , and made it ready to run.
However, whenever i try to boot with new kernel, after choosing it from the grub menu, i got the following error. I tried many many .config files but the result was the same.
Here is the screen capture of the error;
I'm trying this process for a week without any success...
Software :: Apparent Gcc Error When Building Pysqlite ?
Jan 14, 2009I'm running Ubuntu 8.04. I've got sqlite3 installed, but I keep getting errors when trying trying to install pysqlite (2.4.1 or 2.5.1).
If I run $ python setup.py build things look like they're going ok for a while, but then I soon start getting errors:
There's a whole load more stuff, ending up with:
gcc -v tells me that gcc exists so I think that last error must be a red herring.
However, after searching the web and trying lots of things, I've not managed to build pysqlite.
In case it's relevant, setup.cfg contains the following (after attempts at various things having tried following up on some suggestions I found posted elsewhere):
Software :: Bad Tty & File Descriptor Error While Building RPM On F13
Dec 20, 2010I have an FC13 x86_64 server and having trouble building RPMs, but I don't think it's specifically an RPM problem. I think it's a tty management or other type of problem.
When spec files have a "%files -f filelist.txt", which contains the list of files for the RPM, it calls the /usr/lib/check-files script, which sorts the files that are supposed to be in the RPM and compares them with the files that are in the built RPM before they are packaged.
The trouble is that the sort fails.
Here's the trace from the check-files script:
The above doesn't show that the output from sort is redirected into those /tmp files. The first sort succeeds because it reads data sent by the "find" in the same shell. The second sort fails because (I think) it cannot read data from stdin for some reason.
What could possibly cause this? I've checked various permissions, libraries, even used strace extensively, all of which is inconclusive.
This is one of my test server boxes, so this problem is something that I've caused, but I have no idea what.
libc controls input and output, correct? Could it somehow be a glibc problem, or a devpts problem? I can run a simple command and pipe it to sort with no problem. It appears to only be related to sub-shells.
I also replaced sort with cat and just tried to redirect stdin in that file to a temporary file, and that also fails.
I've tried running it with selinux disabled and that has no effect.
Software :: Error In Building Projects In Kdevelop
Sep 18, 20091. I have fedora 9 installed, i installed kdevelop using command yum install kdevelop. so i think all the dependencies must have been resolved.
2.Built a new project in the category C++ -> KDE ->Simple KDE Application
3. then i tried to build it with "run automake and success" in the build tab. It was successful.
4. however, with the option "Run Configure" in the build tab again, I got the following:
Slackware :: Error Building Compiz 0.8.4 From Source - 13
Dec 16, 2009I've been trying to install Compiz 0.8.4 from the source code provided by the Compiz people.
However, when I run make on the first set of code (compiz-0.8.4 tar package), it halts with the following error:
Code:
As well as --disable-gconf and --disable-gnome since gnome isn't install on Slackware (I've also tried it without those, but it picks up on it anyway and throws them out). The folder I'm running this from is /root/Desktop/Compiz Fusion/compiz-0.8.4.