Slackware :: Error Building Gtk+-2.22.0 From Source
Jan 5, 2011I tried building but got errors at the end.
make: *** No targets specified and no makefile found. Stop.
ADVERTISEMENT
Slackware :: Error Building Compiz 0.8.4 From Source - 13
Dec 16, 2009I've been trying to install Compiz 0.8.4 from the source code provided by the Compiz people.
However, when I run make on the first set of code (compiz-0.8.4 tar package), it halts with the following error:
Code:
As well as --disable-gconf and --disable-gnome since gnome isn't install on Slackware (I've also tried it without those, but it picks up on it anyway and throws them out). The folder I'm running this from is /root/Desktop/Compiz Fusion/compiz-0.8.4.
Slackware :: Lilypond Error When Building
Oct 1, 2009I've just tried to compile lilypond using a fresh SlackBuild from slacky.eu site.
I have all deps and I use current Slackware that was gradually upgraded using all current packages since version 12.2. So I call it "version 13".
After a minute or so I got this ugly sentence:
Slackware :: Error Building Glade3 - Build ?
Jan 21, 2011Im trying to build the glade3 slackbuild on slackware x64 -current, but everytime i try to build it, i get the same error:
Code:
There are no dependencies listed in the slackbuild, so i'm confused as to what could be causing this error.
Slackware :: Building From Slackbuilds - Get Make Error ?
May 18, 2010I have tried building a couple of packages like gst-plugins-bad, Qtcurve-Gtk2, but I get make error at this line:
Code:
For gparted I'm getting:
Code:
Using Slackware64 - current
Slackware :: Compile Error When Building SBOPKG For Libsoup
Jan 2, 2011Trying to get Midori browser from SBOpkg's and one of the dependencies is libsoup.configure: error: GLIB 2.21.3 or later is required to build libsoup.Anyone able to give me a pointer in the right direction to overcome this.
View 2 Replies View RelatedSlackware :: Error Building Gnome-power-manager 2.30
May 20, 2010I use Slackware 13.0 with the 2.6.33.2 kernel, and I use GnomeSlackbuild.I tried to get help on their discussion group, but I didn't get any.I'm trying to build gnome-power-manager 2.30, because it uses the new upower interface (so it seems). I have GTK+ 2.18.9.
View 3 Replies View RelatedSlackware :: Slackbuilds - Net-SSLay Building - Required By Webmin To Support Https - Error
Aug 1, 2010I am trying to build an Net-SSLay package for my Slackware, it is required by webmin to support https.
When I start the Slackbuild script I get this error:
Quote:
What can be done to make this work? Or is there any better way to make webmin working with https?
My OS is Slackware 13_64 and webmin is 1.510 (the latest version).
Slackware :: JDK Error (Unknown Source) What To Do
Apr 26, 2010I compiled and installed a new visual traceroute program on my laptop running Slackware 12.1, the program is called GTrace. After an initial ./configure attempt, the program said that I had to install the JDK package. I installed <jdk-6u11-i586-1.tgz> and reconfigured, then make and make install, (I also added a required BerkleyDB <db-2.7.7.tar.gz> file to the install directory, as per the webpage instructions). Now when I try to run the program, it attempts to start ( a window appears onscreen and then just stops and sits there). I then ran the program in the command line and this is the output:
Exception in thread "main" java.lang.UnsatisfiedLinkError: /usr/local/GTrace/libdb/libdb_java.so: /usr/local/GTrace/libdb/libdb_java.so: undefined symbol: __gxx_personality_v0
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary0(Unknown Source
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at com.sleepycat.db.Db.load_db(Db.java:248)
at com.sleepycat.db.Db.<clinit>(Db.java:263)
at com.sleepycat.db.DbEnv.<clinit>(DbEnv.java:173)
at caida.GTrace.GTrace.initGTrace(GTrace.java:444)
at caida.GTrace.GTrace.<init>(GTrace.java:271)
at caida.GTrace.GTrace.main(GTrace.java:1597)
I searched google for this error and found one user that had a similar output in another program, but after reading the other forum, I have no idea what they were talking about or how to fix this up. How I may overcome this JDK error to be able to run the visual traceroute program.
Programming :: IDE For Building C Source Files?
Jan 18, 2010I am trying to build an application on linux and it requires compilation of several files along with my application. Till now I have been trying using a makefile which is built for a test application which uses almost the same files as the mine by replacing its main.c file. But mow have ended up writing everything, function declarations, definitions... in the same file looks very unprofessional and is quite difficult to manage.
View 2 Replies View RelatedCentOS 5 :: Fix For Building MySQL From Source RPM
Jul 10, 2009I've met several issues recently while building the MySQL server from CentOS 5 SRPM. The root problem are the expired SSL certificates used for built-in tests making all the tests fail. The problem is widely described on the net and I am in doubt now what to do: should I submit a patch or what?
View 1 Replies View RelatedSlackware :: Id3-0.78 Homepage For Source Code 404 Error - Slackbuild Fails
Dec 19, 2010I am trying to build abcde from slackbuilds.org and include needed packages like id3. When I went to build it I was unable to download the source from [url] and I get a 404 error in dutch. I was wondering if anyone had this issue or if there was another trusted place to grab the source code? I checked the archives of the slackbuilds-user mailing list to see if the issue is already known, but I didn't see anything.
View 3 Replies View RelatedDebian :: Building Packages Using A Git Repo As The Source?
Jan 21, 2011I would like to create some packages for programs that use the Git software to manage the source, I want to do this directly using the source code in the Git repo as the source code form the package. Does anyone have any hints or directions on how to do this? I been looking round the web for information about this, but all I seem to find is for about storing and build Debian packages from git, this is not what I want to do as these packages are for personal use and I have no need for this.
View 3 Replies View RelatedGeneral :: Building RPM From Source (Binary Package)
Apr 15, 2010I have this source.tar.gz, I unpack it and cd into it, then I
Code:
$mkdir build
$./configure --lots-of-options --prefix=$PWD/build
$make
$make install
So I have inside my build folder, 4 folders, usr, lib, man, share. How do I convert this into a binary rpm package...?
General ::Building From Source Versus Yum Install Or RPM
Nov 7, 2010I'd like to clear up my misconception towards various types of installations. Is one better than the other? Do more senior people prefer compiling from source code? Hows does is compare to yum install or install from rpm?
View 7 Replies View RelatedGeneral :: Building RPMs From Compiled Source?
Jan 13, 2011I already have compiled the source and I want to make an rpm. What do i do with it? Can i utilize the make file?
View 1 Replies View RelatedSoftware :: Looking For Open Source Solution To Web Site Building
Mar 10, 2010I've become reliant on Net Objects Fusion for building and maintaining my web site. NOF is still only offered as a windows app and it is the only reason I have to keep Windows installed.Can anyone propose a comparable application (preferably open source) that will run in Linux?
View 4 Replies View RelatedSoftware :: Building Fakenes 0.5.9 Beta3 From Source - Errors
Aug 24, 2010running ubuntu 10.4 x86_64 downloaded source tarball of fakenes-0.5.9-beta3. tried to compile with ./cbuild as per instructions and it gets to the following and provides quite a few errors
[code]...
Debian Configuration :: Building (Wireless Adapter) Driver From Source
Feb 24, 2010Apparently, the wireless adapter Realtek 8171 uses the rtl8192se driver, which is currently available only as source from Realtek's website. Is building a driver equal to building a package? Should I follow the same cautions, say these ones?
View 9 Replies View RelatedFedora :: Building FBReader 12.1 From Source For Use Within F12 (kernel 2.6.31.9-174.fc12.i686.PAE)?
Jan 3, 2010I'd like to have a shot at building FBReader 12.1 from source for use within F12 (kernel 2.6.31.9-174.fc12.i686.PAE) but am having problems locating the following .rpm files:
libz and libbz2 -- libraries for zip and bzip2 (de)compression
libfribidi -- for bidirectional text support
lincurl, version >= 7.17 -- for network libraries integration
General :: Define Both Source/Destination AND Direction When Building Firewall?
May 30, 2011why do we have to define both Source/Destination AND Direction when building firewall.Isn't direction= source->destination? what would happen if source and destination were swapped?
View 3 Replies View RelatedSoftware :: FC12 Kernel Source PAE - Building Proprietary Nvidia
Feb 9, 2010I have a problem with PAE kernel sources and builing nvidia driver. uname -a returns Linux myX 2.6.31.12-174.2.3.fc12.i686.PAE #1 SMP Mon Jan 18 20:06:44 UTC 2010 i686 athlon i386 GNU/Linux
1. I run ./NVIDIA-Linux-x86-173.14.22-pkg1.run and I get an error message that kernel sources cannot be found.
2. My folders: /lib/modules had these two subfolders 2.6.31.5-127.fc12.i686.PAE 2.6.31.12-74.2.3.fc12.i686.PAE so what I did, I run: yum install kernel and got inside /lib/modules this extra 3rd subfolder (no PAE) 2.6.31.12-174.2.3.fc12.i686 On the other hand /usr/src/kernels has one subdirectory (no PAE): 2.6.31.12-174.2.3.fc12.i686
3. Now, when I build nvidia driver, it still gives me the error, that no sources found, so I do
./NVIDIA-Linux-x86-173.14.22-pkg1.run --kernel-source-path /usr/src/kernels/2.6.31.12-174.2.3.fc12.i686 and get an error that this seems to be the incorrect version. And I guess this is true as I have no PAE sources.
4. Further, when I look at
[Code]...
Slackware :: HDMI Sound After Building A New Kernel ( Slackware 13.1 )?
Aug 21, 2010I'm currently trying to install unRaid on Slackware following this tutorial :[URL].. I'm new to Linux and after many hours, i finally managed to build the new kernel for unRAID (2.6.32.9). But audio on HDMI port doesn't work I tried alsaconf without success. HDMI sound works when i boot into the old kernel.
My codecs are :
Code:
root@unraid:~# cat /proc/asound/Intel/code* | grep Codec
Codec: Realtek ALC888
Codec: Intel G45 DEVIBX
Code:
lspci -v:
[Code]...
Debian :: Building Kernel - Initrd Fail And Nvidia Can't Find Source
Feb 25, 2010So I'm building a custom kernel cuz I want the fbcondecor patch in my kernel. I use the same .config that 2.6.32 debian kernel package comes with. This kernel runs perfectly. I pass --initrd to make-kpkg when building the package but no initrd is built when I install it so I have to make it using "mkinitramfs -o /boot/initrd.img-2.6.33 2.6.33" to get it to boot. Now when I try to build the nvidia drivers it complains it can't find the source. I did build kernel_headers and installed them also the source is in /usr/src/linux. I also tried to specify the path by passing --kernel-source-path= to the nvidia script but no change. What is going on? I've done this fifty times before and never had any problems. Has there been some changes to how debian kernel packages are built? EDIT: Just thought I'd add some info about the steps I took.
Code:
tar xjvf linux-2.6.33.tar.bz2
ln -s linux-2.6.33 linux
cd linux
patch -p1 < ../fbcondecor-0.9.6-2.6.33-rc7.patch
cp /boot/config-2.6.32-trunk-686 ./.config
make menuconfig Loaded .config then I removed support for maxtorfb, tile blitting and some sirrusfb thing, nothing thats relevant to my system. Changed cpu from Pentium 4 to Core 2 and added framebuffer decor
support from my patch, exited and saved. Then:
[Code]....
EDIT2: I have now tried to build 2.6.32.8 in the same way with the same strange results, anyone have any thoughts as to what I'm doing wrong just throw it at me, I'm getting desperate and running out of ideas. I've checked all the kernel source symlinks and everything looks good.
Slackware :: Building Mumble 1.2.2 On Slackware - Current 64?
Jan 10, 2011I'm very keen on getting Mumble installed on my slackware -current 64 bit install. I found a slackbuild script for 12.2 here, but changing the version number resulted in failure. I also tried following the build instructions on the Mumble website, which failed with the following.
Code:
neil@slackbox:~/Downloads/mumble/mumble-1.2.2$ qmake -recursive main.pro
Reading /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro
WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead.
WARNING: /home/neil/Downloads/mumble/mumble-1.2.2/src/mumble11x/mumble11x.pro:33: Variable LIBPATH is deprecated; use QMAKE_LIBDIR instead.
[Code]...
Slackware :: Building Erlang-otp In Slackware 13.37?
May 21, 2011I'm trying to build erlang-otp using slackbuild script from http://slackbuilds.org/. I've got these errors while building:
Code:
checking lex output file root... configure: error: cannot find output from flex; giving up
configure: error: /bin/sh '/tmp/SBo/otp_src_R14B01/lib/megaco/./configure' failed for megaco/.
configure: error: /bin/sh '/tmp/SBo/otp_src_R14B01/lib/configure' failed for lib
GNU flex is in system, so I have no idea what has goes wrong. Maybe someone know the issue?
Slackware :: Building A Guest OS In Xen?
Sep 14, 2010I would request for a step by step procedure for building a slackware 13 guest OS in xenserver 5.6
View 3 Replies View RelatedSoftware :: Building Nspluginwrapper On Slackware 13.1?
Jan 2, 2011I did some research and located a nice packaging script "nspluginwrapper.SlackBuild" so I decided to go that route and build a Slackware package for nspluginwrapper. The error I get is the inability to find /usr/include/gnu-32.h when it is building the nspluginviewer. Not realizing that the viewer is what is used by the Browser I edited the configure script to not build that piece and it worked fine after that but of course that defeated what I was trying to do. What it looks like is that I need to have 32 bit headers or both headers and libraries installed to be able to build the viewer. I just want to use the acrobat reader plugin in Firefox. Would someone please provide an explanation of what I need to do to build nsplguinwrapper viewer?
View 1 Replies View RelatedSlackware :: Src2pkg - Building Xorgxserver 1.8 ?
May 10, 2010Im having problem building xorg-xserver 1.8 with src2pkg
Heres src2pkg build script:
Code:
error that im getting is :
Code:
What am i doing wrong? sysconfdir=/etc directive is inside the script.
Slackware :: Building Mesa-7.8.1 With Osmesa Support?
May 28, 2011I'm using Slackware 13.1, just messing around with some stuff before I upgrade to 13.37. I really want to get a decent build of Desmume working, but the 3D engine for it requires OSMesa to be enabled. I've removed the initial Mesa package that I installed from the Slackware DVD and I'm trying to recompile mesa-7.8.1 so that OSMesa is available for the system. However, I keep running into problems.
Code:
./configure --enable-gl-osmesa
When I run those options for the configure command and compile it, Mesa builds alright and gives me a working libGL just fine. It also gives me libOSMesa. Yet, when I compile Desmume to specifically use OSMesa, its configure script says that it can't find OSMesa at all. But running ldconfig -p, the output shows libOSMesa.so in /usr/lib. The symlink is up to date too, and I've recreated it several times.
Code:
./configure --with-driver=osmesa
When I build Mesa using these configure options, I don't get libGL (well, that's expected, the manual says as much will happen). But apparently libOSMesa is installed just fine. When I went to compile Desmume, no gripes about OSMesa, but Desmume needs both libGL and OSMesa to work properly.
So my question is, how can I install Mesa so that I have OpenGL and OSMesa working together? I've been able to get one working, but not both. I don't know how to get OpenGL on Slackware without using the Mesa package, but the package isn't cooperating. I'm on Intel graphics too.