Ubuntu :: Compiz No Longer Working?
Mar 18, 2010
I have been using some of the compiz effects now for just over a week with no problems. but yesterday they stopped working for what seems to be no reason. I have the recommended nVidia driver installed, here is my graphics card from lspci:
Code:
01:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300 LE] (rev a1)
I right clicked on my desktop, and went to 'Change Destop background', then visual effects. This has been set to None. I cannot change this to Normal or extra, as I get an error saying
Code:
Desktop effects could not be enabled
I have followed another thread which explained how to unistall and reinstall compiz, but it did nothing.
View 5 Replies
ADVERTISEMENT
May 18, 2010
I did a clean install of Ubuntu 10.04 on a Toshiba Satellite, Intel graphics card, a few days ago, and had no trouble accessing the CompizConfig Settings Manager. I changed a number of settings, and everything seemed to be working just fine. But two days ago, I noticed that the compiz effects (rotating desktop cube, minimize effect etc.) were gone; and when I now try to access the Settings Manager, I see a "Starting CompizConfig..." appear in the panel and linger for about five seconds; then it's gone. No settings manager, no error message.
The day that happened, I had (to the best of my memory) not installed any updates. I had, however, removed a bunch of applications through the Software Center. I had also launched Ubuntu Tweak and changed a couple of settings. The only option it showed, and shows, under 'Compiz Settings' was then (and still is): "Prerequisite Conditions" : "Install Advanced Desktop Effects Settings Manager". The box was checked. I have since unchecked and re-checked it, thereby uninstalling and re-installing the settings manager. But that hasn't changed anything.
[Code]...
View 9 Replies
View Related
Sep 22, 2010
I recently tried to plug in a second monitor to my graphics card in an attempt to mess around with a dual monitor set up. This created a duplicate effect (which I expected at first) but downgraded my original monitor to the second monitors max resolution. Now my xorg.conf appears to be blank and I dont believe my fglrx drivers are working anymore.
When I try to start compiz from bash I get the following:
Code:
When I attempt fglrxinfo:
Code:
I'm running Kubuntu, Karmic
AMD64
ATI Radion x1350
What could have happened? All I did was plug in a second monitor and restart!
View 1 Replies
View Related
Jul 5, 2010
I have been running Lucid since it was in beta, and have never had any problems with Compiz. Now, all of a sudden it will not launch. If I try to run it from a terminal I get the following:
Code:
compiz (core) - Fatal: Software rendering detected.
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0
Launching fallback window manager I am running an Intel 82915G/GV/910GL built in graphics controller, and when I run the compiz-check script everything checks out fine.
View 4 Replies
View Related
Jan 18, 2010
I noticed that tv_grab is not working any longer. It seems that they do not updated the pages. It is since long time the problem.
View 7 Replies
View Related
Jan 9, 2010
I just built my linux box and i installed compiz and ccsm. When i change settings in ccsm nothing happens including after i reboot. Once in a while after i boot gnome do and yakuake don't start and the screen is frozen except for pointer.
View 3 Replies
View Related
Apr 25, 2010
I had Compiz, desktop cube and what not, working fine on my computer. Then I had to reinstall ubuntu and know it wont work. I installed compiz and the compiz setting thing is in my preferences, but when i try to edit something it does not effect anything.
View 5 Replies
View Related
Jan 2, 2011
I have an issue running compiz on Ubuntu 10.04. I have a Dell Studio 1458 with an Intel Graphics Card. I ran compiz-check and it keeps saying that "Software rasterizer in use". It is running under VMWare on Windows 7.I installed MacBuntu which installed compiz by itself.
View 2 Replies
View Related
Jan 24, 2011
I hope I'm posting in the right place. I'm relatively new to ubuntu. here goes:Compiz is not working. I have compiz installed, together with the CompizConfig settings manager, and the simple ccsm. When I change the settings in either of those things (or in System->Administration->Appearance->visual effects), no changes actually occur. I tried uninstalling and reinstalling compiz, and I tried a host of other things I could find advised for my situation. I'm at my wits end about this. When I type 'compiz' into the terminal, the screen, and all the windows, flash like crazy for a few seconds, and then the terminal returns:
Quote:
Xlib: extension "GLX" missing on display ":0.0".
compiz (core) - Fatal: Root visual is not a GL visual
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0
Launching fallback window manager and just hangs there indefinitely.
View 9 Replies
View Related
Mar 26, 2010
I have a belkin n wireless net card its model # f5d8053 v3 tring to get this card to work. have done some looking around and some of the places where i have looked they said DID work but are no longer working...the os on the computer i am trying to install this on is a 64 bit ubuntu
View 2 Replies
View Related
May 8, 2010
I upgraded to Ubuntu 10.04 LTS last Sunday, but now my Flash is no longer working and when I try to download from Adobe's site, it only gives me the 32 bit version which doesn't work on Ubuntu 64-bit. How to get Flash (64 or 32-bit) working on my 64-bit system?
View 6 Replies
View Related
May 19, 2010
I have a 'Microsoft Comfort Optical Mouse 3000'. In addition to the regular left/right click and scroll wheel it has an extra button on the side. In previous versions of Ubuntu I was able to remap this button to act as double-click using 'xbindkeys'. However, in Lucid this no longer seems to work. X seems to know about all of the buttons on the mouse since 'xinput' lists the device as having 13 buttons and labels button 8 as 'Button Side'. However, 'xev' does not show a button event when I press the button. Instead it shows:
[Code]...
View 1 Replies
View Related
May 26, 2010
I've recently installed the package xscreensaver-gl-extra, and noticed not one of the screensavers on that package works - all I get is a blank screen on all of them. However, I remember those screensavers working under Jaunty on exactly the same hardware (didn't test them on Karmic).How can I make them work again?
View 7 Replies
View Related
Jul 1, 2010
Upgraded from 2.6.32-22 to 2.6.32-23 through update manager this morning.
However, with the new kernel, it appears my wired network adapter is no more working! Lucky you still can boot up in 2.6.32-22 then
Computer: Dell Inspiron 6400 anno 2007. (laptop)
Anyone else had this trouble?
View 9 Replies
View Related
Jan 27, 2010
I can't get any features of compiz desktop effects working on a fresh install of Karmic Koala. I've uninstalled and reinstalled with sudo apt-get remove compiz and uninstalled advanced desktop settings through the software center. I am completely up to date.
View 2 Replies
View Related
Jul 23, 2010
I'm using edgers ppa and its been really nice until now, this morning I updated as usual and to my surprise after restart compiz is not working anymore.compiz-check does not print anything wrong with my system.
View 9 Replies
View Related
Oct 10, 2010
I've heard that Compiz is not working in Maverick. Is this true? Has it impacted computers with decent graphics cards much, or is it no big deal? I'm kinda confused, because of the Ubiquity thing. Is that replacing compiz?
View 9 Replies
View Related
Dec 2, 2010
I've been running an emerald theme in compiz for few months now and everything was running fine when a couple days ago VLC started acting weird and playing little static clicks every few seconds. Then the next time I booted up after an initial second of flashing my full desktop the screen blanked off a section on the left and bottom of my screen. When I logged in docky told me it was having trouble with the compositing, but when I scrolled over the spot where my docks are they were there. My arrow can be seen in the black areas as can the start panel when I scroll over it, but aside from that it is black and when I open I window the blackness covers it in that part. None of my compiz effects seem to be working.
I am running a pretty basic motherboard and I know basically nothing about this kind of thing but I looked up the built in integrated video card online : ATI Radeon - HD3000 Graphics, On Board Graphic Max. Memory Share Up to 512 MB. I have an ATI driver installed but when I look at my drivers it says it is installed but not currently in use. When I look at my visual effects page it is on none, so I tried changing it to normal and it says the effects can't be enabled. I am running a dual boot with windows and when I go into windows there doesn't seem to be any problems. I am running a Biostar A760G M2+, an AMD AthlonII x4 and running Ubuntu 10.04.
View 9 Replies
View Related
Apr 28, 2011
I've just upgraded to 11.04 and I can't get Super Key working in Compiz, which should be binded to Left Win. It shows up as Multi_key when I enter a key combination. However, if I bind Caps Lock to Super Key it works when entering a key combination. I'm also using a Logitech MK520 keyboard.
View 9 Replies
View Related
Jun 14, 2011
Still new to Ubuntu, and I've installed it on my laptop tonight (Alienware M11x, Ubuntu 11.04). I've got it pretty much how I want it, but I'm stuck with a CCSM/Compiz question.I have Compiz installed, along with the extra plugins (burn, etc).However, when I try to enable any effects, I get nothing as a result.I've rebooted, enabled both Gnome and KDE compatiblities, etc- nothing will work.I'm still learning the ins-and-outs of the terminal/command line system.
View 3 Replies
View Related
May 26, 2010
I just installed Fedora 13 yesterday and now yum is no longer working. I get this message when I use it. Code: There was a problem importing one of the Python modules required to run yum. The error leading to this problem was:No module named grabber.Please install a package which provides this module, or verify that the module is installed correctly.
View 6 Replies
View Related
Jan 28, 2010
something has happened since I cannot longer watch streams which usually required quicktime (mov,qt), I've the medibuntu package and everything was fine till one week ago, maybe something within the last update... I'm using Karmic and Ubuntu Firefox 3.5.4
Code:
Installed plugins
Find more information about browser plugins at mozilla.org.
[code]....
View 3 Replies
View Related
May 10, 2010
After upgrading to Lucid Lynx I can't get Gnomad2 to work with my Creative Zen X-Fi. I used to get it to work by running Gnomad2 as a super user, but now the program quits itself when trying to get the songs from the device claiming a segmentation fault.
Code:
Device 0 (VID=041e and PID=4162) is a Creative ZEN X-Fi.
Queried Creative ZEN X-Fi
Segmentation fault
View 4 Replies
View Related
Aug 21, 2010
I'm not sure if I have a hardware or OS problem. Firewire on my old G3 iMac has stopped working. Previously I've used a scanner and an external hard drive (Iomega eGo) without problems while running Lucid. Now neither works with the iMac, though they both work when connected to a PC. Both the PC and the iMac are running the latest versions of Lucid.
I can't tell when the problem began since I don't use the scanner or hard drive that often. I did try booting using the live 10.04 CD for PowerPC and had no joy with either device.The LCD on the hard drive lights when connected to the firewire port so power is coming through. The scanner has its own power supply.Checking with lsmod I see that both the modules ieee1394 and ohci1394 are loaded.I suspect it's a problem with the hardware. Does any one have an idea how I can go about verifying that? I'd hate to bin an old faithful without first checking everything out.
View 4 Replies
View Related
Dec 5, 2010
I am running 10.10 on a 21.5 inch imac. I just ran some updates and rebooted, turned on rhythmbox to play some tunes and realized there is no sound. Tried ....., no yield. Tried a different user account still no sound. SO I rebooted into osx and I have sound. Its therefore a software issue for sure. I plugged in headphones and changed to the appropriate output in the settings manager, sound came out, but out of phase. What going on here? any ideas would be awesome.
View 4 Replies
View Related
Dec 24, 2010
ok so last night i had my computer set up and working with both vista and ubuntu dual boot so when i started my computer i had a choice between ubuntu or vista went back and forth a few times to make sure everythign worked fine and it did. so this morning i update my vista basic to 7 home premium well now when i start my computer i no longer have a choice and it boots directly into 7. can someone help me fix this i really liked being able to have both on on hdd
i know that ubuntu is still there becouse my hdd reads 220 free of 250 the hdd is 320 i set the other half for ubuntu
View 7 Replies
View Related
Apr 9, 2011
A couple days after an update to Ubuntu 10.10's networking stuff I was unable to connect to my wireless network that had a password. Now, I can connect to a different connection that doesn't have a password but when I try to go to mine it doesn't work.
Running on a compaq nc6000
And yes I do know that the password is correct as I am connecting right now on Win7.
View 1 Replies
View Related
May 1, 2011
Long story short, my HTPC has a keyboard, but no mouse.I'd gotten pretty good at working the machine with no mouse, but after my upgrade to Natty Narwhal today, the Ctrl+Esc shortcut to open the Applications window no longer works. Alt+F2 only works when another application is already open.I can get to the Applications menu using Ctrl+Alt+NumLock and mouse emulation, but it's pretty painful.Have I messed something up here? My install went a little messy, but I've managed to get everything else working and I doubt a keyboard control would be a bad install/upgrade.
View 2 Replies
View Related
May 11, 2011
I recently tried to add a repository by following the directions here: Banshee.fm/download and then select the ubuntu icon at the top. Here is the error I get when I try to run update manager: "Could not initialize the package information An unresolvable problem occurred while initializing the package information.
Please report this bug against the 'update-manager' package and include the following error message:'E:Type 'banshee-team/ppa/ubuntu' is not known on line 1 in source list /etc/apt/sources.list.d/banshee-team-ppa-natty.list'The command I entered was sudo add-apt-repository ppa:banshee-team/ppa. I have tried to remove all banshee related checks in software sources of the ubuntu software center. Then I just removed the lines all together. I still cannot open update manger. Get the same error. Anyone know of a fix?
View 6 Replies
View Related
Mar 21, 2010
Has anyone had trouble getting their keybaord shortcuts to work? I have compiz running, which has introduced some minor quirks. When I'm in the KB Short Cuts gui interface, I cannot revert back to 'Disables'. Hitting the Backspace key takes me to the top of the page and does not revert to disabled? Gonna disable compiz and try again...
View 4 Replies
View Related
