I hope I'm posting in the right place. I'm relatively new to ubuntu. here goes:Compiz is not working. I have compiz installed, together with the CompizConfig settings manager, and the simple ccsm. When I change the settings in either of those things (or in System->Administration->Appearance->visual effects), no changes actually occur. I tried uninstalling and reinstalling compiz, and I tried a host of other things I could find advised for my situation. I'm at my wits end about this. When I type 'compiz' into the terminal, the screen, and all the windows, flash like crazy for a few seconds, and then the terminal returns:
Quote:
Xlib: extension "GLX" missing on display ":0.0".
compiz (core) - Fatal: Root visual is not a GL visual
compiz (core) - Error: Failed to manage screen: 0
compiz (core) - Fatal: No manageable screens found on display :0.0
Launching fallback window manager and just hangs there indefinitely.
I just built my linux box and i installed compiz and ccsm. When i change settings in ccsm nothing happens including after i reboot. Once in a while after i boot gnome do and yakuake don't start and the screen is frozen except for pointer.
I had Compiz, desktop cube and what not, working fine on my computer. Then I had to reinstall ubuntu and know it wont work. I installed compiz and the compiz setting thing is in my preferences, but when i try to edit something it does not effect anything.
I have an issue running compiz on Ubuntu 10.04. I have a Dell Studio 1458 with an Intel Graphics Card. I ran compiz-check and it keeps saying that "Software rasterizer in use". It is running under VMWare on Windows 7.I installed MacBuntu which installed compiz by itself.
I can't get any features of compiz desktop effects working on a fresh install of Karmic Koala. I've uninstalled and reinstalled with sudo apt-get remove compiz and uninstalled advanced desktop settings through the software center. I am completely up to date.
I have been using some of the compiz effects now for just over a week with no problems. but yesterday they stopped working for what seems to be no reason. I have the recommended nVidia driver installed, here is my graphics card from lspci:
I right clicked on my desktop, and went to 'Change Destop background', then visual effects. This has been set to None. I cannot change this to Normal or extra, as I get an error saying
Code: Desktop effects could not be enabled
I have followed another thread which explained how to unistall and reinstall compiz, but it did nothing.
I'm using edgers ppa and its been really nice until now, this morning I updated as usual and to my surprise after restart compiz is not working anymore.compiz-check does not print anything wrong with my system.
I've heard that Compiz is not working in Maverick. Is this true? Has it impacted computers with decent graphics cards much, or is it no big deal? I'm kinda confused, because of the Ubiquity thing. Is that replacing compiz?
I've been running an emerald theme in compiz for few months now and everything was running fine when a couple days ago VLC started acting weird and playing little static clicks every few seconds. Then the next time I booted up after an initial second of flashing my full desktop the screen blanked off a section on the left and bottom of my screen. When I logged in docky told me it was having trouble with the compositing, but when I scrolled over the spot where my docks are they were there. My arrow can be seen in the black areas as can the start panel when I scroll over it, but aside from that it is black and when I open I window the blackness covers it in that part. None of my compiz effects seem to be working.
I am running a pretty basic motherboard and I know basically nothing about this kind of thing but I looked up the built in integrated video card online : ATI Radeon - HD3000 Graphics, On Board Graphic Max. Memory Share Up to 512 MB. I have an ATI driver installed but when I look at my drivers it says it is installed but not currently in use. When I look at my visual effects page it is on none, so I tried changing it to normal and it says the effects can't be enabled. I am running a dual boot with windows and when I go into windows there doesn't seem to be any problems. I am running a Biostar A760G M2+, an AMD AthlonII x4 and running Ubuntu 10.04.
I've just upgraded to 11.04 and I can't get Super Key working in Compiz, which should be binded to Left Win. It shows up as Multi_key when I enter a key combination. However, if I bind Caps Lock to Super Key it works when entering a key combination. I'm also using a Logitech MK520 keyboard.
Still new to Ubuntu, and I've installed it on my laptop tonight (Alienware M11x, Ubuntu 11.04). I've got it pretty much how I want it, but I'm stuck with a CCSM/Compiz question.I have Compiz installed, along with the extra plugins (burn, etc).However, when I try to enable any effects, I get nothing as a result.I've rebooted, enabled both Gnome and KDE compatiblities, etc- nothing will work.I'm still learning the ins-and-outs of the terminal/command line system.
Has anyone had trouble getting their keybaord shortcuts to work? I have compiz running, which has introduced some minor quirks. When I'm in the KB Short Cuts gui interface, I cannot revert back to 'Disables'. Hitting the Backspace key takes me to the top of the page and does not revert to disabled? Gonna disable compiz and try again...
My compiz animations (magic lamp, airplane, ...) aren't working.I have an Intel GMA 4500M onboard but that shouldn't be the problem (I can enable effects from System > Preferences > Appearance).I'm using ubuntu 10.04.
I hope this is the correct section. I have recently updated to 10.04 and now Compiz/desktop effects wont work. When I try to turn visual effects on I get a message saying they could not be enabled. I'm a bit new to all this so not sure if I'm doing something wrong.I've looked at many threads regarding this problem and nothing they say has worked. iv tried using Hardware Drivers (in systems administration) but this says "no proprietary drivers are in use on this system".
Also I don't know whether this effects anything but when I open NVIDIA X Server Settings (in systems administration) i get a message saying "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server."Does anyone know how I can get Compiz/desktop effects working?.
I was using Super+M keyboard shortcut yesterday to enable/disable the Compiz Negative theme (inverted colours), but now when I do the same keyboard shortcut it just opens the Mail/Chat/Broadcast menu next to the date/calendar/clock in the top panel.
I have recently upgraded to 11.04 and everything works except for compiz and emerald, every time I enable compiz to be the window manager the borders either do not work or they do not appear. I switched the window manager to metacity and now the borders work but I can not get any effects at all. Also emerald never replaced the window borders either.
I have compiz installed, and ccsm. Currently the only window manager I can get to work is metacity.
KDE works fine with compiz.
If I even enable "desktop cube" in ccsm, my window manager dies and the proper one does not start up. Running Code:
In a terminal also bombs out.
Unity seems to work fine as far as this is concerned, but I hate unity. It isn't even remotely ready to use in my opinion.
I see alot of other people posting about this with no solid answers.
I moved all the following out of the way from my old 10.10 $HOME, so this should essentially be a clean home dir. as far as compiz and GNOME are concerned:
Code:
I created a brand new user and tried to enable compiz in classic desktop. Same thing.
I've recently installed Ubuntu on my laptop, and I installed Compiz from the software center. I went to the animations section and set different animations, but they don't take effect. I've tried disabling them and re-enabling, I've tried restarting, but nothing is working. What can I do to fix this?
I just installed Compiz for KDE in my OpenSUSE 11.2. I use Compiz for my window manager but there is a problem. When I press Alt + Tab there is nothing happen. Is there anything I need to configure in Compiz?
Not quite sure what could be wrong here. The settings are enabled, but none of the compiz functions are working. The were working on Friday. I did some searching but I'm not even sure what the problem is, or how to diagnose it. I'm running 10.10, now.. any help is appreciated. Even if you just tell me what I need to be searching for to find a solution.
Compiz stopped working entirely recently and I've been trying to reinstall different version, nothing helped. Now when I look at synaptics, the version of the different package (compiz, ccsm, bcop...) are of different version (from 8.2 to 8.6). It tried reinstalling only from synaptics and it didn't change anything. I'm not sure that'll fix my problem, but for sure it doesn't help. Does anybody know what repos i should use to get a clear installation?
All ive had since i upgraded from 10.10 to 11.04 s problems. After i upgraded and rebooted my machine, i logged in and the desktop would not load. Ive managed to sort that out but i cannot get compiz and emerald to work! I had it working perfectly before i upgraded
When i open compiz-fusion icon in the bar and change the desktop to compiz and emerald, the buttons on top of the window disappear and i cant do anything unless i change it back.
I recently upgraded Fedora 11 to Fedora 12. No problems. Tried to get fancy and add Compiz using a string I took from the fedora forum.
Now the system appears to be booting but then hangs with the cursor in the corner. I am able to get to a virtual terminal (Ctl-Alt-F3)and examined the /etc/X11/xorg.conf.
I believe it is looking for an "nVidia.ko" file. I am not able determine what to do to get back to normal.
Attempted to rename the xorg.conf file but it didn't help. Not really sure that is what the problem is but I tried running startx and it mentions that file as a problem.
Any steps I should be trying to get back to the regular GUI desktop?
Anybody got compiz in xfce working or have some apps, widgets, themes or other fun stuff to share? Like a netbook spin/remix and or a slackware edition.
buntu user but this time I'm planning to remain so I would like to solve this little problem, which is the following:I have a MSI Wind U100 running Ubuntu 10.04 LTS... everything works fine, both Compiz and Emerald, but when I plug in an external screen (Samsung SyncMaster 2232BW) Compiz simply gets disabled, if I try to re-enable it a pop-up shows up saying "Searching for video driver..." (or something similar) and it reverts "None" againWhen I unplug the external screen and try to re-enable Compiz it runs fine like it should, I've read elsewhere to run "compiz --replace" but it does nothingI thought something like:Plugging in an external screen requires Ubuntu to use a different display driver which doesn't support Compiz
Im a new member here.So please don't get mad at me.If i posted on a wrong section(Am I in the right section?) By the way,Here is my problem. My graphic card is Intel 82852/82855.And it passes the Ubuntu Desktop Effects requirement. I am aware of enabling the graphic card in Ubuntu 10.10, Since enabling the drivers was successful. I enabled the desktop effects.After i switched to Normal(Graphic Mode)the screen went blank. Then after i clicked ALT+TAB. there is an option to keep this option or not.I clicked Keep this settings. Then i proceeded in Web browsing(because i'm a web addict). Then i click CTRL+ALT+LEFT/RIGHT For the workspaces to switch. Then i found this 4 square transparent with black margin boxes.Which has a weird distorting effect.That effect is going crazy. Then i rebooted(Hoping to fix the problem).Then it is still there.
i have ubuntu studio 10.04 installed and this is my second installation of the system. now that i have updated the system, got the fglrx drivers for my ATI HD5750, installed compiz-config-settings and glx-dock (aka cairo-dock). the first time i started the glx-dock, half of the dock was visible and it was distorted all over. so i ran compiz-config-settings for the first time and saw that it wasn't also working. then i tried to find a solution for a few valuable hours because it was essential to customize the feel of an OS but i think i have came to a point that i should stop trying to learn things that i see for the first time but ask and hope for the best (soon). anyway i should say that compiz and cairo dock was working the first time i installed the system. now when i run compiz-check, it gives the following output:
Code: Gathering information about your system...
Distribution: Ubuntu 10.04 Desktop environment: GNOME Graphics chip: ATI Technologies Inc Device 68be Driver in use: fglrx Rendering method: None
Checking if it's possible to run Compiz on your system... [SKIP] Checking for hardware/setup problems... [SKIP]
At least one check had to be skipped: Error: No rendering method in use (AIGLX, Xgl or Nvidia) ok AIGLX doesn't start, so i check Xorg.0.log and it says: (it has loaded and initialised AIGLX but maybe i misunderstand something, anyway you should see for yourself)
Code: X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-25-server i686 Ubuntu Current Operating System: Linux ubuntu 2.6.32-28-generic #55-Ubuntu SMP Mon Jan 10 21:21:01 UTC 2011 i686 Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-28-generic root=UUID=826145cb-591c-4a6e-9d6c-62fba6898f38 ro quiet splash Build Date: 10 December 2010 05:53:04PM [Code]....
