Ubuntu Installation :: Update Manager No Longer Working In 11.04?
May 11, 2011
I recently tried to add a repository by following the directions here: Banshee.fm/download and then select the ubuntu icon at the top. Here is the error I get when I try to run update manager: "Could not initialize the package information An unresolvable problem occurred while initializing the package information.
Please report this bug against the 'update-manager' package and include the following error message:'E:Type 'banshee-team/ppa/ubuntu' is not known on line 1 in source list /etc/apt/sources.list.d/banshee-team-ppa-natty.list'The command I entered was sudo add-apt-repository ppa:banshee-team/ppa. I have tried to remove all banshee related checks in software sources of the ubuntu software center. Then I just removed the lines all together. I still cannot open update manger. Get the same error. Anyone know of a fix?
View 6 Replies
ADVERTISEMENT
May 28, 2010
When I run update manager, it gives me an error message saying:
Code:
This can be caused by:
* A previous update which didn't complete
* Problems with some of the installed software
* Unofficial software packages not provided by Ubuntu
* Normal changes of a pre-release version of Ubuntu
if I click partial upgrade, it looks like it did during the upgrade, then says:
Code:
There are no upgrades available for your system. The upgrade will now be canceled.
if I click close from the first "not all updates can be installed" dialog, it says:
Code:
It is impossible to install or remove any software. Please use the package manager "Synaptic" or run "sudo apt-get install -f" in a terminal to fix this issue at first.
running the suggested line gives the following output:
Code:
In Synaptic, fixing broken packages does nothing. Mark All Updates > Apply seems to work, but I'd still like to figure out why Update Manager does not?
View 7 Replies
View Related
Sep 30, 2010
It started with Update Manager constantly recycling and not updating. When it starts it shows 295 files and 308MB waiting to download. When I click on 'Install Updates' it appears to go through the process, and then presents me with the same 'waiting to install' window again - and again, and again - in fact as many times as I care to click the 'Install Updates' button. No error messages appear. The 'Settings' button produces the same apparent process as the 'Install Updates' button, but doesn't present me with any other screen.
I've tried all the solutions I could find on these forums and nothing works. The sudo suggestions for Terminal usually produce error codes. adjusting a line in the 'hosts' file. When I tried this I was presented with the obstacle of not having access to the read-only file, and no matter how much I searched I couldn't find how to gain access . While investigating all these possible solutions, I was directed in turn to the Software Sources and Synaptic Package Manager applications, but when I attempted to start them, 'Starting Administrative Application' appeared briefly on the taskbar - and then disappeared!
View 7 Replies
View Related
Oct 5, 2010
Could not initialize the package information
An unresolvable problem occurred while initializing the package information.
Please report this bug against the 'update-manager' package and include the following error message:
Went to the terminal and used "sudo apt-get update" as well as "sudo apt-get dist-upgrade" both error out following error message for dist-upgrade:
View 6 Replies
View Related
Aug 6, 2011
Update manager on my computer (running ubuntu 10.04) isn't working. I can open it up from the System menu, but when I press "check" or "Install updates" it the cursor just spins in circles like it's thinking but it never does anything. I can't even quit the program.
I recently did two things that might have caused the problem.
1) I upgraded yesterday from 8.04 to 10.04. I don't remember if I ran Upgrade Manager or not earlier today but I think I might have.
2) I have a dual-boot system and I re-partitioned my hard drive this evening. I shrunk the partition with Ubuntu on it, moved the swap partition over, and expanded the Windows partition. The first time I logged in after re-partitioning the hard drive I got an information message saying that the Update manager hadn't loaded correctly. That was when I first noticed the problem, so I suspect that it has something to do with me moving around files in the re-partitioning.
View 9 Replies
View Related
May 31, 2011
I have a pc at work with 9.04 on it and when I try to use the update manager it says that it is no longer supported. how do i upgrade to the newest version?
View 6 Replies
View Related
Apr 24, 2010
I just did latest update and I get the following error message "The repository may no longer be available or could not be contacted because of network problems. If available an older version of the failed index will be used. Otherwise the repository will be ignored. Check your network connection and ensure the repository address in the preferences is correct. Failed to fetch [URL] 404 Not Found. Some index files failed to download, they have been ignored, or old ones used instead."
View 8 Replies
View Related
May 18, 2010
I did a clean install of Ubuntu 10.04 on a Toshiba Satellite, Intel graphics card, a few days ago, and had no trouble accessing the CompizConfig Settings Manager. I changed a number of settings, and everything seemed to be working just fine. But two days ago, I noticed that the compiz effects (rotating desktop cube, minimize effect etc.) were gone; and when I now try to access the Settings Manager, I see a "Starting CompizConfig..." appear in the panel and linger for about five seconds; then it's gone. No settings manager, no error message.
The day that happened, I had (to the best of my memory) not installed any updates. I had, however, removed a bunch of applications through the Software Center. I had also launched Ubuntu Tweak and changed a couple of settings. The only option it showed, and shows, under 'Compiz Settings' was then (and still is): "Prerequisite Conditions" : "Install Advanced Desktop Effects Settings Manager". The box was checked. I have since unchecked and re-checked it, thereby uninstalling and re-installing the settings manager. But that hasn't changed anything.
[Code]...
View 9 Replies
View Related
Sep 30, 2010
As the title says i updated my system which then needed a reboot. I also installed Mixxx djing software to try it out. So i thought id just restart the system. Usually when i boot into my desktop wireless automatically can connect to my router but not this time, wired only for now... i know theres tons of wireless issue threads but some more experienced users will be able to get straight to the point and run through some diagnostics with me.
View 1 Replies
View Related
Dec 5, 2010
I am running 10.10 on a 21.5 inch imac. I just ran some updates and rebooted, turned on rhythmbox to play some tunes and realized there is no sound. Tried ....., no yield. Tried a different user account still no sound. SO I rebooted into osx and I have sound. Its therefore a software issue for sure. I plugged in headphones and changed to the appropriate output in the settings manager, sound came out, but out of phase. What going on here? any ideas would be awesome.
View 4 Replies
View Related
May 3, 2009
Have a problem to decrypt emails after I updated to 5.3. Didn't change anything to the pgp or Kpgp settings and Kmail says that it failed decryption with openpgp. As I don't know what to look for or what to check I am lost.. it encrypts outgoing messages just fine.
View 1 Replies
View Related
Mar 3, 2010
I think an update or something has killed Samba on my Karmic box. it can see Windows shares OK, but it no longer appears on the Windows network.I have not changed my smb.conf for months, so something else has been modified.Looking in the logs I can see the following in "log.winbindd-idmap" after restarting Samba
Code:
[2010/03/03 10:07:20, 0] winbindd/idmap.c:201(smb_register_idmap_alloc)
idmap_alloc module tdb already registered!
[2010/03/03 10:07:20, 0] winbindd/idmap.c:149(smb_register_idmap)
[code]...
All other networking seems fine (internet, Synergy+ etc) it's just sharing out to the Windows network that is broken.
View 2 Replies
View Related
May 15, 2010
Since my latest update to Ubuntu Lucid, VLC is no longer working. When starting VLC, I get an impractical dark interface that doesn't response to any command.
vlc -v gives this output:
Code:
VLC media player 1.0.6 Goldeneye
[0x9d7f668] main libvlc warning: cannot load module `/usr/lib/vlc/gui/libqt4_plugin.so' (/usr/lib/vlc/gui/libqt4_plugin.so: undefined symbol: _ZN9QListData7append2ERKS_)
[0x9e2e6d0] main demux warning: no access_demux module matching "file" could be loaded
[0x9d7f668] main libvlc: Start vlc met standaardinterface. Gebruik 'cvlc' om vlc zonder interface te gebruiken.
[0x9e5bfa0] main generic error: no dialogs provider module matched "any"
[0xb7400e48] skins2 interface error: no suitable dialogs provider found (hint: compile the qt4 plugin, and make sure it is loaded properly)
[0xb7400e48] skins2 interface: skin: subX author: Martin Poehlmann
[0xb7400e48] skins2 interface warning: non-unique id: time
[0xb7400e48] skins2 interface warning: non-unique id: songticker
[0xb7400e48] skins2 interface warning: non-unique id: main.normal.dbuttons.info
[0xb7400e48] skins2 interface warning: non-unique id: eq.onoff.lef
[0xb7400e48] skins2 interface warning: non-unique id: eqwin.normal.titlebar.menu
[0xb7400e48] skins2 interface warning: non-unique id: eqwin.normal.titlebar.clos
It looks like a Qt4 problem, I have installed Qt4 with all possible dependencies, re-installed vlc several times but no effect! cvlc as proposed doesn't react.
View 4 Replies
View Related
Jun 5, 2010
recently installed 10.04 on his hp pavilion laptop and we got everything working fine, including the wireless internet. When he installed some recommended software updates his card is no longer being detected although wired networking is still fine.
ryan@ryan-laptop:~$ sudo lshw -c network
[sudo] password for ryan:
*-network:0 UNCLAIMED
[code]...
View 9 Replies
View Related
Jan 13, 2011
E: Type 'nchpad.net/ubuntu-wine/ppa/ubuntu' is not known on line 1 in source list /etc/apt/sources.list.d/ubuntu-wine-ppa-maverick.list E: The list of sources could not be read. The above is the console output when i type sudo apt-get update Update manager throws the same error so now I can't install or update software .
View 2 Replies
View Related
Mar 16, 2010
After a fresh install of Ubuntu 9.10-64bit I don't have Hardware Manager, Update Manager or Software Resources just to name a few.I tried sudo apt-get update & sudo apt-get upgrade & everything is up to date.
View 9 Replies
View Related
May 18, 2011
I received this: 'E:Type 'ain' is not known on line 3 in source list /etc/apt/sources.list.d/psyke83-ppa-natty.list'
Update Manager and Packet Manager do not work.
Ubuntu Software Center is also affected.
View 1 Replies
View Related
Apr 12, 2011
My update manager is not working,it showed an error that said it might be because a file is no longer available.I have ubuntu 10.4.
View 9 Replies
View Related
Mar 6, 2011
Lately, I get an error (see attachment) from the Update Manager...Don't know what to do...??
View 4 Replies
View Related
Feb 14, 2011
the following is the message I am getting from the update manager when I try to start it:
Could not initialize the package information
An unresolvable problem occurred while initializing the package information.
Please report this bug against the 'update-manager' package and include the following error message:
'E:Read error - read (5: Input/output error), E:The package lists or status file could not be parsed or opened.'
View 2 Replies
View Related
Jul 4, 2010
I am trying to update using Update Manager and I get this message: Failed to fetch "Failed to fetch [URL]..404 Not Found" My system is 64 days out of date now.
I have looked elsewhere for an answer and some others have had similar problems, but I have not found a reason for it happening, nor an answer. I wonder if anyone can help me please. I have been using Ubuntu for several months, can use the Terminal if I have the right commands to issue, but beyond that have limited knowledge of the system.
View 9 Replies
View Related
Mar 14, 2011
having had problems with getting grub2 to work on dual HDD setup...despite the most excellent advice on the forum i took the plunge and installed 10.10 from update manager within 10.04..... bingo fixed grub and now have dual boot again. but the update manager and synaptic package don't work because of libedata-cal1.2-6 file that remains..following other advice on the forum Advice gratefully received, how can i force an unistall of this package
mark@studypc:~$ sudo apt-get -f remove
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...
View 9 Replies
View Related
Jun 8, 2011
Update Manager is inviting me to update from my Maverick Meerkat to Natty. Is this a good idea?
View 7 Replies
View Related
May 2, 2010
I started the upgrade to 10.4 from 9.10 through the update manager. It started the update to 10.4. After downloading almost 95% of the update, it gave an error message of "could not download certain components. downloaded files will not be erased" and stopped the update. I restarted the PC, and started the update manager again. But now it does not show any option of update to 10.4. how do I continue or resume the update process? I just started using ubuntu about 15 days back. So, I am relatively new to this.
View 3 Replies
View Related
Nov 6, 2010
I just installed ubuntu 10.10, and im triying to update, when i uncheck the packages that i dont want and click on the "install updates" button in the update manager, the update manager check it again and download the packages that i dont want
View 1 Replies
View Related
Feb 28, 2011
I am having a problem with the latest update of lucid ubuntu. I was on 10.04 for the longest time but decided to update while I was out doing errands. When I got back the logon screen was made up of blue and gray windows on a completely black background and the mouse and keyboard wouldn't work!
I found that if I unplugged and then replugged my mouse that I could get it working, but not all the options work properly. When you try to close a menu it just stays up, but it isn't there at the same time. Also, the shutdown/restart options don't work along with the physical power button on my computer, I have to remove the battery and power cord to shut it down.
I am currently dual booting ubuntu and windows 7 on my gateway NV59 laptop.
View 9 Replies
View Related
Jan 9, 2011
I need a console based file manager for 10.4 and my beloved mc is no longer installable.
View 4 Replies
View Related
Oct 1, 2010
I am using ubuntu 9.10.While running a partial update through System->adminstration->update-manager. I am facing error as 'Error Authenticating some packages". Please find the attached, screenshot of the error and sources.list file output.
View 1 Replies
View Related
Oct 26, 2010
I'm having trouble updating. Using the update manager fails and I see the message:dpkg: parse error, in file '/var/lib/dpkg/available' near line 23288 package libbonoboui2-common': 'Conflicts' field, reference to 'libbonobous2-0': version contains ' '
I've tried
sudo dpkg --configure -a
and
[code]....
View 1 Replies
View Related
Dec 24, 2010
every time i try to update my computer i get this message administrator@desktop:~$ sudo aptitude upgrade W: The "upgrade" command is deprecated; use "safe-upgrade" instead. Reading package lists.Done Building dependency tree Reading state information. Done Reading extended state information Initializing package states.. No packages will be installed, upgraded, or removed. 0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 0B will be used.
[Code]...
View 8 Replies
View Related
