I just got to finish installing ubuntu lastest version on my new netbook, im really exited about how powerful it can get. The thing is, I'm still keeping my old Windows 7 partition and data, and I want to access it faster, editing the grub options, to change the timer on it, and the default booting option.
View 6 RepliesI've installed Windows 7 Ultimate on a notebook which previously ran Vista. No problems there.I've now installed Ubuntu (now updated to 10.04)so that it can boot to either OS.
It all works fine and when I first power up, I get a screen which invites me to select the OS I want to use. There are however two problems:
1) it defaults to Ubuntu (whereas I would prefer it to default to Windows 7 (it's a work laptop and most of the applications are Windows-specific),
2) the list of choices is getting increasingly complex with an expanding list of choices (with each major update of Ubuntu adding more); it even seems to include an option to go back to Vista!As long as I move down the list and make the right selection quite speedily, I get to where I want to be (though, as I say, I would like to change the default option).Is there any way I can edit/shorten this list without damaging the functionality and how can I change that default?
I have installed 10.04 from scratch (fresh install) and I am unable to change the default option of grub using the keyboard. while booting
View 7 Replies View RelatedI tried to do my parents a favor by installing Ubuntu 9.10 alongside WinXP on their PC -- same configuration I have on my desktop at home. The install went fine, but since I made a poor buying decision on purchasing a MSI motherboard in the past, Ubuntu immediately crashes after boot (other MSI board users having the same issue, no help from MSI).
The computer tries to boot Ubuntu by default unless something else is selected from the boot menu. How do I change the boot preference from default (choice 0) to WinXP? I tried manually changing this (editing the grub.cfg file), but the file said not to edit, that it's generated by something else...How do I have WinXP load by default instead of the broken Ubuntu?
I'm extreemly new to Ubuntu and installed 10.04 onto a partition this morning. When I boot up my PC a menu called GRUB comes up and the list of OS's has ubuntu 1st. If I dont change my selection to vista it automatically boots into ubuntu. How can I change the order or default booting OS? I have seen other people talk about it but I'm not sure if it's up to date.
View 2 Replies View RelatedI installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
I am attempting to try install XUbuntu.
I loaded the dvd (one that came with Linux Format Magazine No. 139), changed BIOS to boot from dvd, and then:
I get the welcome screen with the options to boot Ubuntu, KUbuntu, XUbuntu or Boot from First Hard Disk. As I have an older laptop I was going to try XUbuntu. However, the arrow keys did not change the boot option. In fact nothing worked, Tab did not bring up a menu and Enter did not initiate boot.
I tried reloading the dvd, switching off the laptop (no way to shutdown) and restarting but always come up with the same problem.
My DVD drive works fine and the dvd appears not to be faulty since all the info is readable when it is loaded with windows running.
My system details are:
HP compaqnx9000
Mobile Intel Pentium(R) 4-m CPU 2.20 GHz 219GHz 704MB RAM
Optiarc DVD RW AD-7580A
Radeon 1GP 340M
I recently installed Karmic, and want to change the default Grub entry to Windows XP. Having done some research and tried things out, I am a bit confused. I have edited etc/default/grub so that it has GRUB_DEFAULT=6 (to correspond to my XP installation) and GRUB_TIMEOUT="3", but after running sudo grub-mkconfig the grub.cfg file still says set default="0".
View 9 Replies View RelatedI have just installed Ubuntu 9.10 on a laptop previously running 8.10
I am unable to change the default OS in Grub from Ubuntu 9.10 as I cannot find /boot/grub/menu.lst.
How do you change the default OS in this newer version of Grub.
I'm installing debian squeeze and and I've got 2 hdd (sda,sdb), but I want to install it on sdb. When i get to the "Install the grub boot loader on the hard disk" it automatically installs it on /dev/sda (and I get an error), I want to install it on /dev/sdb... Is it possible.
View 12 Replies View RelatedThe first is I seem to have 3 GRUB installs. So whilst I update the one from my live session, the change does not appear in the boot up menu. I had installed 10.10 from a CD into a different partition (sda6), but that will not boot, so I have just deleted this and done another grub install and update. The kernel I am using has just been updated from 10.04 to 10.10 too, and it is this that I use and the Grub I have been working on (sda5).
[Code]...
Whenever I load Ubuntu on a machine with other OS(s) loaded it always recognizes and adds an entry in the bootloader menu. Not this time. Well kind of. After the install my windows boot option was in the menu, but after an update it is no more. I see the different Linux images... but no Windows boot option. Can someone tell me how to add my windows XP boot option back to the bootloader? I have XP on the the on the 5th partition and Ubuntu on the 6th...
View 3 Replies View RelatedI have recently upgraded my ubuntu image to 2.6.31.17.since I upgraded the start-up manager dosent work any more. I even tried changing it manually in the ectdefualtgrub.cfg and it says boot from entry 8 (which is my windows partition) but it still defaults to 0 on boot
View 3 Replies View RelatedI was wondering how I can make Windows XP the first and default option on my Grub 2. I use Ubuntu 9.10 through a semi-dedicated partition on my second hard drive, if that helps. I use Grub 2 just cause I have a grub.cfg file, and here it is.
Code:
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
[Code].....
I want to change my default boot OS from Ubuntu 9.10 which is now o Windows XP Pro SP3.How can I do that?Grub 2 is installed
View 1 Replies View RelatedI loaded Kubuntu 9.1 and got a mess in the Grub 2 Boot Menu, which I can't correct.
I get extra choices in the Boot menu, and the first few, which are supposedly for Kubuntu Karmic Koala all put me in a shell, which ends in a black screen, then shows up a shell once I hit "enter". Then I just have a "intramfs" (?) prompt.
So I went into Grub2 to change it, and it refuses to do it. All I get is a screen full of error messages every time I try, with no change. Apparently it is looking to access drive sdb8, which is non-existent. I DO have a drive sda8, though.
So with all the wonderfulness of the indirect system to change Grub 2 how am I supposed to set it right? The old Grub worked fine, and just took simple changes to the menu.lst file.
Can't somebody write a program that lets Grub 2 be changed from within the program, rather than all this running around trying to find what file to change, and how to get the change to work?
Just to be clear, here are the errors as they show up when grub-update is flailing around:
"error: cannot open '/dev/sdb' while attempting to get disk size
error: cannot open '/dev/sdb' while attempting to get disk size
Generating grub.cfg
error: cannot open '/dev/sdb' while attempting to get disk size
[Code].....
I think my Natty 64 bit install is missing a dependency for gk, even though it shows up install in Synaptic. I have also tried using Start up Manager and the changes I make there don't show up after restarting either. I just want to change the default boot to number 4, Windows. Any suggestions are welcome, but I have tried all the ones I've found on this forum so far and none have worked, including editing etc/grub/default and saving with sudo update-grub. That's when I get a "gk not found" error.
View 2 Replies View RelatedI had a working dual boot Ubuntu 10 and Windows 7. Anyways long story short, I got it working again but have lost the boot option for windows 7. If i run fdisk -l, I get the following.
root@support-Latitude-E6400:/home/support# fdisk -l
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
[code]....
I installed gparted and can see that windows 7 is installed in dev/sda6. In another forum, i read that someone had to edit their menu.lst so i did with the following.
title=Windows 7
rootnoverify (hd0,6)
makeactive
chainloader +1
When i try to boot from windows 7, i get the following error. Error 12: invalid device request. How can i get my laptop to boot from windows again?
I just installed Ubuntu Server 10.04. When I reboot, it stops at a "grub>" prompt. I figured out that I can continue booting by entering these four commants:
set root=(hd0,1)
linux /boot/vmlinuz-2.6.32-21-generic-pae root=/dev/sda1 ro
initrd /boot/initrd.img-2.6.32-21-generic-pae
boot
I can't figure out, however, how to save these as the default so that the machine can boot without someone present to enter these commands. Running "grub-set-default" tells me "entry not specified." I don't see anywhere in /etc/default/grub that looks relevant.
How do I save my default grub settings?
I have Windows 7 and Ubuntu 10.04 dual-booted on my machine. grub was aautomaticlu installed as the primary loader. Soon i want to nuke my ubuntu partition but i know that will delete grub. Can i remove grub or at least make Windows boot loader default.
View 2 Replies View RelatedI am a new Ubuntu user, and I am attempting to set Windows 7 64 bit as my default OS in the boot loader instead of Ubuntu 10.10. I have entered the command gksudo gedit /boot/grub/menu.lst into terminal, and the menu.lst file does open. However, this file appears to be completely blank, which does not seem to make sense and is preventing me from changing the boot order.
View 4 Replies View RelatedJust installed 11.04 and do not know how to change the boot order in the new grub.
View 3 Replies View RelatedI have ubuntu 11.04 and windows vista installed on my pc. I have already set windows vista as my default os, but I'd like to put it at the top of the boot menu (currently it's in 4th).
View 2 Replies View RelatedI managed to set up my laptop to dual-boot Windows XP SP3 and Ubuntu 10.04. How do I set the Windows to be the default boot option at startup (GRUB2)?
View 3 Replies View Relatedi installed it on a external HDD. my primary OS is windows 7 on my 1 internal hard drive. After i installed ubuntu whenever i boot up my computer i have to have my external hdd plugged in and turned on or else i get "cannot find GRUB" then some rescue thing comes up where i can type stuff. i would just like to move the GRUB loader to my primary hard drive or at least recover my windows loader but have ubuntu on it.
View 9 Replies View RelatedI'm having an issue with GRUB, I have four OSes on my hard drive. Here they are in the order I installed them:
Windows 7 (Windows bootloader)
Ubuntu (GRUB 1.97)
YLMF OS (GRUB 2)
Debian (Some ancient bootloader)
(For those of you unfamiliar with it, YLMF OS is an Ubuntu-based distro re-skinned to look like Windows XP. Other than the theme and branding it's exactly the same as Ubuntu) Each time I installed another operating system, it replaced my original bootloader with its own. I made the mistake of installing Debian last, thus leaving me "stranded" with an old version of GRUB. Since at the time I was relatively inexperienced with Linux, I solved the problem by reinstalling Ubuntu, which then replaced the bootloader with GRUB 1.97.
I mainly use YLMF OS, and so when I wanted to change some GRUB menu settings (the default entry, timeout, etc.) I naturally changed the /etc/default/grub file in the YLMF OS partition, not the one in Ubuntu. Once I rebooted I realized that my changes weren't being applied for that reason. Thus my problem is that my computer is using the GRUB that Ubuntu installed, not the one YLMF OS came with. How do I change which version of GRUB is used when I boot up? Yes, I could just change the settings in the Ubuntu partition, but YLMF OS came with the newer/est version of GRUB, so I want to use that instead.
i am trying to change the boot order on the GRUB menu so that the countdown automatically starts on an older kernel. From what i can see all the solutions on the web want me to edit the /boot/grub/menu.lst file. The problem is that i don't have one. Someone also mentioned that if i don't have a menu.lst file then i should look for the grub.conf file. I don't have on of those either. The closest thing in /boot/grub is grub.cfg but that looks nothing like the descriptions i have heard of /boot/grub/menu.lst file
View 5 Replies View RelatedI have openSuse 11.2 along with Windows, I get an option on boot to choose between the two OS, but the default is suse. How can I change the default load to Windows
View 1 Replies View RelatedI just installed kubuntu 910 via cd iso. now i want to change the default grub timeout. It says i dont have permission to edit etc / default /grub so what do i do? i dont know how to login as root user.
View 7 Replies View RelatedI have Lucid on my laptop. Unfortunately, with the various 2.6.32 kernels neither hibernate nor suspend work, so I've installed and use the last 2.6.31 kernel that came with Karmic.Now, I'd like to set it as default, so that I don't need to actively choose it when I boot. The problem is that I can't find a way to set Grub (version 2.0, or 1.96rc, can't remember) to pick the 2.6.31 kernel and if I try to uninstall the 2.6.32-23 kernel synaptic says that linux-generic and linux-headers will also be uninstalled (not just the parts specific to 2.6.32-23).
View 2 Replies View Related