I've just bought this laptop Asus G750JZ with Intel Haswell i72.4 GHz and Nividia GTX 880. I have this problem with Debian: after i install the OS it says that Gnome 3 could not be loaded. I guess it doesnt recognize my video cards(Intel HD 4600 and NVidia 880). How to make Debian running in optimal condition on my laptop.
View 5 RepliesAs someone says,I install fedora 15 in VisualBox,and before installing I choose "Enable 3D acceleration",but when entering the desktop,I just see "Gnome 3 failed to load".Earlier of today,I try this in VMware Workstation,there is the same question. Why this happens?Is that means I will miss the Gnome 3 in VisualBox and VMware Workstation.....for God's seek...
View 8 Replies View RelatedI have built my own custom Fedora 15 spin, the problem is that every time it show me GNOME 3 Failed to Load message dialog with the following message: "Unfortunately GNOME 3 failed to start properly and started in the fallback mode ....." Is there anyway to disable this dialoag?
View 1 Replies View RelatedI just installed opensuse 11.4 64 bit. Compiz and everything was working fine on my ati card (mobility 2600) with the default radeon drivers. I added the gnome 3 stable repo, updated fine. But when I rebooted I get booted into the fallback with no 3d effects and it says "gnome 3 failed to load" What gives? The drivers were working fine with full acceleration. I know gnome 3 works on this card, I tested it on the fedora live cd just fine.
View 5 Replies View RelatedI'vd a problem with loading modules. Booting gives the this error:
Code: Select alllucas@debian8-1:~$ systemctl --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
● systemd-modules-load.service loaded failed failed Load Kernel Modules
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
[Code] ....
Always the same error when booting. After a period of time, (Graphical User Interface) the mouse click no longer operates, also text input isn't possible.
I had no access to the system at all, even crt alt F1 stopped working, also text input was no't possible. so reinstall was the only option. Maybe there is a connection with this two errors.
I've reinstalled Debian 8 several times. Still, both errors stay.
The same happend again (in the GUI) is nothing possible, no txt input, no mouse click), but now I have access to the system, ctr/alt F1 is working.
After regular upgrade (I am using Unstable) I boot my system today but failed to load X using xinit (which I always use). Using startx X loads but leaves it unusable, both mouse and keyboard don't work (I never use startx really as regular user but in root). The message is:
Code: Select allxf86OpenConsole: Cannot open /dev/tty0 (No such file or directory)
In my /etc/X11/Xwrapper.config I changed "allowed_users=console" to "allowed_users=anybody" and that doesn't work.
I was playing around with QT5 today and I am getting the error Gtk-Message: Failed to load module "canberra-gtk-module". Searching suggested that the module may not be installed however it looks like it is to me.
Code: Select allii libcanberra-gtk3-0:amd64 0.30-2.1 amd64 GTK+ 3.0 helper for playing widget event sounds with libcanberra
ii libcanberra-gtk3-module:amd64 0.30-2.1 amd64 translates GTK3 widgets signals to event sounds
ii libcanberra-pulse:amd64 0.30-2.1 amd64 PulseAudio backend for libcanberra
ii libcanberra0:amd64 0.30-2.1 amd64 simple abstract interface for playing event sounds
[code]....
I recently upgraded from 10.10 to 11.04. I am able to log into and use LXDE desktop, but at the GUI login when I try to log into gnome-shell or Open Box, the log in fails. With Open Box I just get a black screen. When trying gnome, I get error "Failed to load session "gnome." When trying KDE Plasma I get music and then black screen on which I can control the mouse cursor.
Attached is my hardware info and xsession error file. I am using a Samsung SyncMaster 175v monitor. Version 10.10 worked well, with not issues, and was fully updated. I followed the upgrade directions, I believe.
I uninstalled Empathy, now I have error in gnome with OAFIID:GNOME_FastUserSwitchApplet failed to load. Installing back empathy dont solve the problem. Pidgin is better by far, why ubuntu want me to use empathy? Anyway, how should I reinstall this applet? I google it, but I cant find out the way to install the session indicator applet. Sorry, noob here.
View 2 Replies View RelatedI have this kind of error:
Code: Select allr@prime:~$ systemctl status systemd-modules-load.service
● systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Чтв 2015-08-20 08:07:38 EEST; 13min ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 150 ExecStart=/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
[Code] .....
This error happened when i booted my system :
Failed to start Load/Save Screen Backlight Brightness of backlight:acpi_video0. See systemctl status systemd-backlight@backlight:acpi_video0.service' for details.
I installed linux-image-4.1.0-trunk, when I boot into the kernel there's no wireless available. Dmesg indicates seems like the firmware is loaded, although firmware-iwlwifi is installed:
...
[ 11.047031] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-7265D-13.ucode (-2)
[ 11.047039] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-7265D-13.ucode failed with error -2
Built a machine w/ i5-4440 & gtx 960. I installed xserver-xorg-video-intel & xserver-xorg-video-nouveau. Xorg -configure fails, so I added xorg.conf I found online, makes no difference. xrandr can't open display. startx of course fails.
Backstory: My plan was to dual boot sid + stable as fallback with shared partition. First installed stable and whether connected to mobo or gfx card, I couldn't get login on tty, it would just hang on errors. So I installed sid (this time using lvm to hopefully make partitioning easier) and while I get the "failed to load nouveau" errors on mobo, gfx card gives me a login screen.
uname -a
Code: Select allLinux 4.1.0-2-amd64 #1 SMP Debian 4.1.6-1 (2015-08-23) x86_64 GNU/Linux
lspci | grep VGA
Code: Select all00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation GM206 [GeForce GTX 960] (rev a1)
[Code] .....
I tried to install debian on my system using a small image at first that would download all the necessary components during the install. It loaded everything except Grub, and wont boot. I need to rescue this as the downloading of all the components took ages and I don't want to do that again.
View 1 Replies View RelatedGnome loads without problems when Kernel Mode Setting is enabled. Original message
Daily updated Debian Testing | Custom Gnome installation
Intel GS45 chipset | Intel GMA 4500HD graphic card
The title is rather vague because I haven't been able to identify the cause of the problem. I installed Debian Testing using the daily builds of March 6th and 7th with the same results: the system fails to load the Gnome desktop after the log in. Instead, a pale blue background is shown. No panels, no window manager, nothing. I can move the cursor but there's no context menu and the key bindings don't work, turning the session useless. The problem exists in all accounts, and persists even when the dot-files are deleted after the first Gnome start.
After trial and error, I found out that if I changed to a virtual console (VC1 to VC6) and go back to VC7 (sometimes VC8), the Gnome desktop loads as expected. The pale blue background is shown over/instead of the actual background and I need to cover ("paint") it with a window to show the actual one. This pointed me to a Gnome Session or a graphics card error. Indeed, if I disable Gnome Session, the Gnome desktop loads after the log in. Of course, no interface settings are set. I checked the Gnome Session's bug list without luck and the error messages in .xsession-errors aren't conclusive, for they appear in other cases.
About the graphics card: the video settings work (screen settings, 3D accelaration, recovery after suspend to RAM/disk) but Xorg's log shows several erros and warnings when setting up the system (mostly related to the video and touchpad settings). Right now, I'm building a custom xorg.conf file to try to decreases udev's errors and see if it affects the Gnome problem. I've spent hours trying to solve this problem. It's annoying to lose interface settings after closing the session (key bindings and brightness settings, for example).
when i ran jhbuild build as a normal user, i found below messages before it failed
Code:
Please add the files codeset.m4 gettext.m4 glibc21.m4 iconv.m4 isc-posix.m4 lcmessage.m4
progtest.m4 from the /aclocal directory to your autoconf macro directory
or directly to your aclocal.m4 file.
You will also need config.guess and config.sub, which you can get from
ftp://ftp.gnu.org/pub/gnu/config/.
[Code]...
How do you resolve the error, "failed to load session "Gnome"" at start up?
View 2 Replies View RelatedI upgraded to jessie today and I am having problems with my background. When I log in, the background tries to start on the external monitor but then it fails to load. I can change the background in settings but it does not show up. The background just becomes black and I am not sure why.
View 3 Replies View RelatedI ran my daily update of Debian Stretch using Synaptic, and when done had an un-installed update for ifupdown remaining marked in the list. By right clicking I was able to get Synaptic to say it would install the update, along with quite a few other updates. In the process of doing this, my screen went dark and stayed dark. On reboot, I get the Grub menu to select which Linux system I want to boot, but whichever one I choose, including older ones, I get to a command line, not the Gnome GUI.
I tried to complete the update of ifupdown using apt-get, only to discover that my machine no longer has any network connection, let alone Internet.
How do I begin to troubleshoot this?
When I press )print screen button ) it says ....here was an error running gnome-screenshot:Failed to execute child process "gnome-screenshot" (No such file or directory)
View 4 Replies View RelatedI think I'm ready to install Linux openSUSE physical on my Laptop. NO VMware Workstation anymore...But before I can do that I must be sure that Linux works on my System.--- SYSTEM ---
System: TOSHIBA Satellite A300D-13A (PSAK4E-01F00VGR)
CPU: 2x AMD Turion� 64 X2 Mobile Technology TL-64
--- NETWORK ---
[code]....
OK, should be enough for the first, ask if I forgot some Hardware...Because I can't find any driver, and I'm not sure. I'm a LINUX NOOOOOOOOOB!!I really want to install Linux openSUSE, I'm MICROSOFT/WINDOWS HATER since 1 month now!! PS: Wine can't start my favorite Programs like Project64 a N64 Emulator. It fails to start a game! I think the graphic plugin crashes... | The exact error message is: "Failed to extract ZIP Archive" or "Failed to load file".
I`am trying to install drivers for a very old graphics card GeForce2 GTS/Pro on Suse 11.2. I downloaded driver NVIDIA-Linux-x86-71.86.13-pkg1.run and install it successfully. But when I launch "sax2 -r -m 0=nvidia" it crushes with error "isax: could not import file: /var/cache/sax/files/config at /usr/sbin/isax line 199"
[Code]....
i installed ubuntu 11.04 on my presario cq40-115au but it does not load the default gui (unity). i only see a blue background and an icon of my other partition on desktop. even alt+F2 does not pop the "run application" windows. anyone had the same issue? especially with radeon hd3200?
View 6 Replies View RelatedWhen my server starts I received this text:No kdump kernel image found:[WARNING]Tried to locate /boot/vmlinuz-2.6.18-164.6.1.el5.centos.plusLoading kdump:[FAILED]
View 4 Replies View Relatedi am trying to run compiz it runs but i get this error
compiz (cube) - Warn: Failed to load slide: freedesktop
and then most of the plugins dont work . kwin uses alot of cpu resources so i am using compiz
When I start my computer GRUB starts, but it only says:Grub Loading stage1.5.Grub loading, please wait...and nothing happensHere is what happened before:I had a dual boot on my computer with Windows and Ubuntu. There was also a problem with Windows, but that's another thing. Now I had not upgraded Ubuntu for a long time. I think I still had Ubuntu 8.9 . So I wanted to upgrade and let Ubuntu do it automatically, it showed the upgrade to 9.4. So let it upgrade, but it asked if it had to change menu.lst, but since I had menu.lst modified in the right way, I choose the option to keep the already installed version. But it just kept asking the same question, so 4 or 5 times and a few hours later I choose the option to change it to the default package version. Then it didn't ask this anymore, but it hung at a later stage.
So I waited several hours longer, but it didn't proceed anymore, so I had to shut it down.It shut down OK, but then when I restarted, what I described above happened.Now I have another problem, my disk reader (CD/DVD) doesn't work either, so I cannot simply use a LiveCD.
I have a problem loading ipmi drivers. The program responsible for the loading fails on a first one (ipmi_ msghandler.ko) and quits
View 1 Replies View RelatedI have had a few X crashes and started to suspect compiz as they usually happened when I was resizing a window or the window was wobbling.
Here is the Xsession-errors log (it's a hidden file in your home folder). It mentions:
Code:
WARNING: Application calling GLX 1.3 function "glXCreatePixmap" when GLX 1.3 is not supported! This is an application bug!
Starting gtk-window-decorator
Unable to find a synaptics device.
[Code].....
My nvidia graphics driver was updated last night, and since then I've been unable to get into Gnome without resorting to low graphics mode. I have extensive knowledge of Windoze systems. Upon boot up, I get the following error:
(EE) NVIDIA(0): Failed to load NVIDIA kernel module!
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration
I've tried some troubleshooting, including attempting to uninstall all nvidia drivers and reinstall (via synaptic).
Administration->Hardware Drivers reports that version 173 is installed loaded and active. Nvidia X Server Settings (nvidia-settings) gives me the "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server." error.
I've tried the nvidia-xconfig (both with gdm up and down) and it hasn't made any difference.
Oh, it's a GeForce 6200 wwith two Dell E193FPp monitors running on Ubuntu 10.04.
Here's my xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Fri Mar 12 01:42:27 PST 2010
Section "ServerLayout"
[Code].....
My laptop broke beyond repair recently so I am stuck on a 6 year old hp pavilion zv5000 given to me by a friend and I thought I may as well give linux a go, I have been meaning to for years. I've installed xubuntu 10.04 as I heard it is less resource intensive than normal ubuntu but have been unable to configure the nvidia graphics card. I used the hardware drivers program which installed the nvidia accelerated graphics driver 96 (which was the recommended version) and then ran sudo nvidia-xconfig as instructed and got
Code:
Warning: Unable to locate/open X configuration file.
New X configuration file written to '/etc/X11/xorg.conf'
Which I presume means it worked correctly, but whenever I try to boot I get a message saying "failed to load nvidia kernel module", at which point I either have to restore the generic configuration or just start the session in low graphics mode. I have googled the problem and in a lot of peoples cases it seems to be linked to upgrading from a previous version whilst mine was a fresh install. I tried sudo modprode and it says the nvidia module isn't present. I tried installing the packages in synaptic which mentioned nvidia kernel modules but still no luck.