I can't install libgtk2.0-dev, or many of its dependencies, on a new-ish install of 10.10. Synaptic returns:
Code:
libgtk2.0-dev:
Depends: libglib2.0-dev but it is not going to be installed
Depends: libgdk-pixbuf2.0-dev but it is not going to be installed
Depends: libpango1.0-dev but it is not going to be installed
Depends: libatk1.0-dev but it is not going to be installed
[Code]...
I'm trying to install pcsx2 emulator and one of dependencies is libgtk2.0-dev.I think I tried everything but synaptic and terminal are still giving me this
Code:
libgtk2.0-dev:
Depends: libgtk2.0-0 (=2.18.3-1) but 2.18.3-1ubuntu2 is to be installed.I really don't understand what is this about.
I just installed Maverick on my netbook (Lenovo S10-2) and am having network issues. I had to plug in to the ethernet port before installing to get extra packages and updates. I was going to get the Broadcom STA wireless driver after it was complete. Installing the OS worked fine and it downloaded everything it needed to. But when I restarted, it didn't recognize when I plugged in the ethernet cable, making getting the wireless driver impossible. I reinstalling twice. Same story.
I tried different cables and none of them worked. Also, I tried to compile the wireless driver myself so I could put it on without having internet.
Is Gimpshop still being maintained and developed? It vaguely appears to be stagnant from outward appearances. It seems like a great idea (and I have used in the past), but I am not sure it is being actively maintained. Was this project abandoned, and if so do you know why?I would like to install on Ubuntu Maverick 10.10 in an AMD64 situation. Is that possible? It really solves quite a few issues for people trained on Photoshop.True you could try to relearn with GIMP, but every time I work with the program, a lot of stuff seems like a pain in the *** way to complete a task. Gimpshop on the other hand seemed to fix a lot of that.
View 2 Replies View RelatedAs was requested, I installed ubuntu maverick on a desktop computer that was having problems. I installed maverick (32-bit), and it crashes usually during or after software installation.
The specs of the computer:
Pentium D processor
1GB RAM
Intel integrated graphics card
160GB HDD, 40GB ext4 ubuntu partition
The only problem I can think of is that I've had stability issues on ext4. I *think* Pentium D's might be 64-bit, but I don't think that'd be an issue. If I can get this sorted out, the install will count as an epic win, first time I've ever experienced complete out of the box hardware support, printer included, plus compiz on an intel integrated graphics card.
I'm looking to install an older kernel in Maverick - something like 2.6.32 maybe? Just wondering if there's a way to do it without compiling myself. I upgraded my system without checking everything. I use it as a MythTV box and the 2.6.35 kernel breaks my remote control in a manner that appears to be unfixable at the moment, if the forums on the problem are right. I figure an older kernel will get me out of the jam, but I'm not sure how to go about it (there aren't any in the standard repos).
View 4 Replies View RelatedUnity is too slow and buggy for me right now and I really really loved the old netbook remix interface (I wish they would make that one the default instead of Unity).Anyways, I read somewhere that I can still install it in maverick with a simple package install but I've looked everywhere for it and couldn't find the exact package.
View 1 Replies View RelatedI decided to give a new download of Ubuntu 10.10 a chance. It went on fine,I even installed VirtualBox with noi problem, But I am light on assessories,particularly gimp. I tried the Ubuntu Software Center, then I tried the Synaptic Package Manager for this and other packages, and guess what? I kept getting errors like this:dpkg: failed to read on buffer copy for copy info file `/var/lib/dpkg/available': Input/output error
E: Sub-process /usr/bin/dpkg returned an error code (2)I even found a link that showed how to include gimp on 10.04 or 10.10 with a few command line statement, and I thought that would fly, but I got the same error again. Another problem is that my monitor keeps fading to a sort of blue-gray color indicating the processor is having trouble keeping up, but I have only FireFox running, and the keyboard locks up after after just a a smaill handful of charactrers are typed, then after about 10 seconds or so, the keyboard buffer flushes to the screen.
This certainly is not typical of earlier Ubuntu versions, and I wonder if anybody else has similar problems or knows the cause and cure.I am down to the point of asking myself, what is so urgent with the Ubuntu developers that we are having more and more conflicts between hardware and software to resolve with each new release? And that they are pulling more and more packages out of the LiveCD in order to make room for something that is bulking up in some other manner? What are you people up to, make Ubuntu more like Windows with coming releases? If I wanted Windows, I would stick with or get a newer version of Windows.
i need help on installing ati x1650 pro driver. ubuntu hardware driver is not showing any driver for it and i tried to install it manually from ati linux driver and i'm getting errors.
Code:
buzzmandt@main:~/Downloads$ sudo sh ./ati-driver-installer-9-3-x86.x86_64.run
[sudo] password for buzzmandt:
Created directory fglrx-install.wYeDwa
Verifying archive integrity... All good.
[Code]....
In past versions of Ubuntu, I've used a customized version of oxygen-refit-red. This time, however, there is no apparent option to install the theme from a tar.bz2 file.
View 1 Replies View RelatedI'm trying to install Rubyripper into Maverick using these guidelines: [URL]
But I get this error message in terminal:
Code:
W: Failed to fetch http://ppa.launchpad.net/aheck/ppa/ubuntu/dists/maverick/main/source/Sources.gz 404 Not Found
W: Failed to fetch http://ppa.launchpad.net/aheck/ppa/ubuntu/dists/maverick/main/binary-i386/Packages.gz 404 Not Found
E: Some index files failed to download, they have been ignored, or old ones used instead. Presumably because it can't find the package. But what do I do next? or is there an alternative way to install?
Im trying to install TinyOS package on Ubuntu Maverick. However during installation, I get the following error Quote:
E: /var/cache/apt/archives/avr-gcc-tinyos_4.1.2-20080806_i386.deb: trying to overwrite '/usr/bin/avr-cpp', which is also in package gcc-avr 1
E: /var/cache/apt/archives/binutils-avr_2.20.1-1ubuntu2_i386.deb: trying to overwrite '/usr/bin/avr-size', which is also in package avr-binutils-tinyos 2.17-20080806
[Code]....
I've been butting heads with a problem for about a week now. For a while I've been running a DAW (Digital Audio Workstation) off a 4 GB Kingston DataTraveller Flash Drive. Using partimage, I've managed to install this Maverick Ubuntu and load it with Audio Stuff from UbuntuStudio....plus wineasio and some Windohs audio software, then save the images of the partition usb stick (win32 livecd partition and casper-rw persistence partition).I've also done the same thing with a linuxaudio distro called pure:dyne. I restore and use either according to my needs. Obviously 4GB isn't a lot of space....so over the holidays I went out and bought the 8GB version of the DataTraveller. Two weeks later I'm still trying to get things to work right.
The problem is that when I create the casper-rw partition and boot into Ubuntu things slow to a snail's pace. Ubuntu takes over 5 minutes to boot up. Installing anything with Synaptic or whatever takes 5x as long as with the 4GB version of the flash drive. Everything works rather well....although multitasking is laborious, if possible at all. At first I thought it was the usb-key itself. After returning it (twice) I realised this just wasn't the case. 3 different flash drives had performed exactly the same way. Googling around over the last few days I found I'm not the only one to come across this problem...but still no solution.
What makes things weirder is that today I installed pure:dyne on that same stick and it works perfectly...running as smoothly (almost) as from a normal harddrive. Weirder still is the fact that pure:dyne is built from ubuntu itself...the only difference (as far as the whole usb-creation business goes) is that the persistence file/partition is named "live-rw" instead of "casper-rw".
I'd settle for pure:dyne...except it's built on "lucid" not "maverick"....two of my 3 computers have graphics driver issues with pure:dyne and the soundcard support is spotty (which is strange for a distro specialising in audio production) and wine (and therefore vst/i support) is not nearly as good. If anyone has any clue what goes on here I'd be very interested. In the meantime I'll run pure:dyne on the one computer that likes it.
mojo@mojo:~/Downloads$ sudo apt-get install gnome-shell
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following packages have unmet dependencies: gnome-shell : Depends: mutter but it is not going to be installed it asks for mutter, yet mutter is already installed. I think it asks for different version of mutter.
I tried to install Xubuntu 10.10 Maverick as dual boot on my laptop. However when xubuntu is on, I can't find a way to connect to internet. When I try the 2 arrows on the up-right corner the option for wireless is deemed.
View 1 Replies View RelatedIs it possible to install the Maverick Meerkat over Lucid Lynx without losing third party programs and Document data on my Laptop?
View 3 Replies View RelatedI have a couple of 64bit Maverick installs from the minimal CD.They each have about 1100 packages installed. When I started to upgrade one to Natty with the Upgrade Manager, it told me it wanted to install 205 new packages (along with upgrading 877).205 new packages seems like a lot of growth in the minimal install.Why do I need those 205 packages?Then I looked at the minimal CD page where I saw that the minimal CD itself (which has lists of packages not the packages) grew from 15.6 to 22MB.So, did the minimal install just bloat up with Natty or what? Is there an even-more-minimal install?
View 3 Replies View RelatedI'm attempting to install a command-line version of Maverick, from the alternate CD. I'm using the 64-bit version. The installation has gone fine - however, I'm having troubles getting the wireless to work. I've installed wireless-tools by carting the *.deb archive over from another computer - this seemed to go fine, and iwconfig shows my wireless card as "wlan0". However, even after setting the essid and the WEP key I can't connect to the internet (tested this using apt-get). I know that this wireless card requires the "rtl8187se" module, which automatically loads with the desktop version of Maverick - however, it isn't working on the command-line. Running "sudo modprobe rtl8187se" pings back an error message saying that the module can't be found. Is there a way for me to manually install it or "find" it?
View 1 Replies View Relatedtried to install drivers for FX 5500 today, the one that Ubuntu recommended (173) and the current version (260). Both installs failed when it tried to set up python-support. Returned an exit status of "10". I don't know what that means. I could really use some help, because I just installed UT2K4, and without the driver, I can't play it. I'm running the latest release, as noted in the thread title. Dunno if it helps, but it was a clean install, because an alternate iso upgrade failed and mucked up 10.04.
View 3 Replies View RelatedI would like to know if someone was able to upgrade/fresh install ubuntu 10.10 maverick on a dell studio hybrid. First I've tried to upgrade. Everything went well, until the system started. First thing to notice is that the orange was so bright that was almost impossible to look at the monitor. Not a big deal, adjusting some monitor brightness etc. Second the mouse (usb) stopped for some fraction of a second, or a second, when you click to open a program. It is annoying but it is also a problem that I could wait to find some solution.
Third and worse, it was completely impossible to see videos in vlc or other players, I've tried vlc, xine, etc, the videos was stuttered, choppy. SMPlayer was able to play them better. I've tried the solution here [URL] and it does not work at least for me. Fourth the fans went completely crazy, running as mainly when I have to use smplayer, I've found some complains about that [URL] but the solution does not apply to my computer.
Then I've tried a fresh install hoping that some of the troubles would not appear. The only trouble solved was the look and feel. Mouse the same trouble, stuttered, choppy videos on vlc, fans running all the time. And now it was impossible to install the wireless proprietary driver Broadcom sta. The only solution was to come back to Lucid. A fresh install of Lucid and mouse working ok, no troubles seeing videos in vlc, fans working absolutely normal and no troubles to install the wireless driver.
I've just installed a second hard drive in my laptop with windows 7 on one drive and Ubuntu on the other. I selected the side-by-side install in the Ubuntu install and let Ubuntu do the rest. Unfortunately Grub isn't seeing the windows install even after reconfiguring grub. However, the windows 7 drive is visible in Ubuntu and all the windows files are there intact.
Does anyone know how I can make grub see Windows 7 so I can boot into it?
I wanted to customize the keyboard to use the cedilla but accidentally i deleted all content of
/usr/lib/gtk-2.0/2.10.0/libgtk2.0-0.immodulesi havent found any file to download and replace this one.
When I installed Arch Linux on my Toshiba L10 Intel Centrino laptop, it detected my video card and monitors correctly "out-of-the box". Now that I've installed Ubuntu 10.10 "Maverick Meerkat", it has not.
How can I configure Ubuntu to use the correct Intel drivers with my Intel 82852/855GM graphics card?
can we upgrade lucid to maverick by using maverick live cd. what are the other methods for upgradation
View 3 Replies View RelatedI've been using rubyripper quite happily on Karmic, now I've moved to Lucid and discovered a bit of an issue. rubyripper will pause for several minutes between tracks with ruby 1.8. If I upgrade to ruby 1.9.1 the gui client won't run due to an issue with libgtk2-ruby not being available for 1.9.1.
The cli version of rubyripper under 1.9.1 is blazingly fast, so that is what I'm using at the moment, but I do prefer the gui.
Anyone have any insight into this? Googling suggests there may be a bug in ruby 1.8.7 that caused the long pauses, but it was supposed to have been fixed in 1.8.7.249 i.e. the default Lucid version.
i was installing 8085 simulator but on executing ./configure i get following error: checking for GTK... no configure: error: Cannot find libgtk2.0 >= 2.12.0 Please check the following: * Do you have the gtk+ development package installed? (usually called gtk2-devel for rpm based distros or libgtk2.0-dev for deb based distros or similar) If ls -l /usr/lib/pkgconfig/gtk+-2.0.pc reports that the file does not exist, then you are missing the development package. how can i remedy it? i am using fedora 7 on and my system is Intel core2 duo.
View 4 Replies View RelatedI tried to install suse 11.3 but every time the system shut down in the install process it never finish
I think that the FAN does not work
I have an Acer Aspire 5720z
Tried to install Gnome after the minimal server (console based) install.I would like to install a graphical GUI now What to do? wich packages? tried zypper gnome-desktop (or something similar) but it wasn't enough.
View 3 Replies View RelatedIf I install the factory release now, can I easily convert my system to a normal 11.3 point release later, after 11.3 is out? If so, how would I do it? (11.2 has an issue that affects me. It's fixed in 11.3 already, so I have to use 11.3 if I'm going to use openSUSE.)
View 4 Replies View RelatedIn /var/log/warn I can see :Code:Jul 18 19:29:41 Linux1 SuSEfirewall2: Warning: config 'vsftpd' not available I did install vsftpd, but I removed it and install pure-ftpd instead.