G'Day guys; Well I tried to boot into Ubuntu this morning but no good, got to a blackscreen which said : GNU GRUB Version 1.98 + 20100804- 5Ubuntu2 Minimal BASH-Like line editing is supported.For the first word TAB list possible command completions.Anywhere else TAB list possible device or file completions. Can't get into the Grub boot screne nothing just this screen,
View 6 Repliessince i have installed the nvidia drivers i have lost the graphical boot and just had a bar at the bottom of the screen instead. i tried to get the graphical screen back by adding vga=795 to my /boot/grub/grub.conf but when i rebooted not only did i not get the graphical boot or the toolbar at bottom.
i got list of all the drivers and services it is starting with ok next to it. i have also since doing this lost the bit when restarting or shutting down getting the words restarting or shutting down and just get blank screen with flashing cursor. i removed the vga=795 and i still get the list of drivers/services loading.
how do i get the quiet option back. i have checked /boot/grub/grub.conf and it has the quiet in it.i have also tried running update-grub but get message command not found. i have attached the grub.conf file
I've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
View 9 Replies View RelatedI am trying to streamline my boot screen/GRUB Menu. I know what I want it to look like (grub_wanted.jpg), and I think I know how to get it by uninstalling a couple of things, (synaptic.jpg). Now I have too many items on the screen, and it looks cluttered to me (grub.jpg).
View 3 Replies View RelatedI followed a tutorial to install XP across my entire HDD. I installed Ubuntu 10.10 "Alongside another OS". Ubuntu loads fine, but when trying to load XP, the boot screen shows up, but then the computer restarts and returns to the GRUB menu.
I saw some threads on this site and tried to type: sudo gedit /boot/grub/menu.lst
In the terminal. It returned a blank text document so I'm not sure if that information was outdated. I then typed: sudo fdisk -l
And got this:
Not sure what any of this means, but I sure hope someone else does. I would say forget XP, but it's hard to let go of some of the games and software I use. I appreciate any responses, thank you.
I tried to format the table as it appeared, but the forum corrected the extra spaces.
I was playing with my netbook and trying to hackintosh it only to realise mic, webcam and network don't work. So I restored the entire disk ubuntu 9.10 from a Ghost image I had made prior. But it doesn't boot, it only shows the word GRUB on top left corner.
View 4 Replies View RelatedLoaded the OS using the Windows Installer as recommended in Smart Computing. When the system finished loading and I rebooted into Ubuntu the screen showed GRUB... Can't figure out how to load Ubuntu from the GRUB screen.
View 1 Replies View Relatedi installed ubuntu 10.10 inside windows and when i boot ubuntu a grub screen appears what should i do?
View 9 Replies View RelatedI installed Ubuntu 10.10 to dual boot alongside Windows 7 on a Dell Inspiron. This worked fine and after restarting it seemed to be working normally, after the first boot into windows though when I tried to restart the laptop again I just get a blank screen with a blinking cursor in the top left instead of the grub screen.I'm still able to boot the LiveCD fine and tried to reinstall Ubuntu but the exact same thing happened? Anyone know what's going on/how to fix this?
View 9 Replies View RelatedHere's the problem: My ubuntu goes into a black screen with "_" flashing after selecting the kernel in grub menu. Everything has been working just fine since I installed it (about a month ago, when 11.04 came out). The problem must have something to do with grub not finding the correct partition or something like that. I was messing around with pysdm, trying to make it auto-mount one of my partitions, so that's the likely cause of my problem. However, I did not edit anything on the ubuntu partition, only the partition where my files are located. Is there any way to tell grub which partition to load upon booting up?
View 9 Replies View RelatedI recently wanted to install ubuntu 11.04 on my computer (which had vista on it and I wanted to just completely wipe that out). After the install I noticed that my monitor would not receive signal during boot (I heard the little drum noise but my monitor said no signal). So I tried following these instructions (which have worked in the past): [URL]
but when I boot the computer I don't have a GRUB menu! It just automaically starts booting ubuntu 11.04. Is this because that is the only OS I have installed? Did I do something wrong? What can I do to fix the problem?
host - ubuntu 10.04
guest (VM) ubuntu 9.10
Sun VirtualBox - virtualizer
How to start grub screen of ubuntu 9.10 (guest) at boot. Pressing [ESC]/F1/F2/F5 etc. seems having no function.
PC specs: i7 920, Ati HD5870, 4GB ram Installing Ubuntu 10.04 from a USB stick. The stick is fine as I installed Ubuntu on my laptop with it no problem.
Problem #1: The grub boot manager is missing. The first time I installed Ubuntu it appeared as usual and let me choose between windows 7 and ubuntu. Due to the black screen issues I uninstalled Ubuntu. Since then, every time I've tried reinstalling it I don't get the grub boot manager, instead my PC goes straight to windows. I have formatted the partition I installed Ubuntu on, as well as installing it on another drive, to no effect.
Problem #2: After the Ubuntu splash screen, I'm greeted by a black screen. After a few seconds my monitor goes into standby. Ctrl+alt+f1 does nothing, and removing quiet and splash from the command line didn't help either. I hear I need to use vesa drivers but I have no idea how to go about this when I can't even get the OS to start in the first place.
When I boot my pc it used to take me to a prompt which asked which OS I would like to boot. Today randomly, some grub rescue menu came up. I read online that that meant I had to fix my grub menu, which I did. Now a regular grub menu pops and and I have no idea what to do with it. Whats a grub menu? How can I just get back to my regular boot screen? I run dual boot xp and ubuntu, is grub a program of xp or ubuntu? I have no idea what this grub menu is and whats going on with my pc!
View 2 Replies View RelatedI am trying to install Ubuntu Server 10.10 on a computer with 5x 1.5 TB HDDs. I went through the process of partitioning the five hard drives into three partitions each:
sd*0 is a 300MB partition for /boot, RAID1, 2 active, 3 spare
sd*1 is a 500MB partition for swap, RAID1, 2 active, 3 spare
sd*2 is a 1.5TB partition for /, RAID5+LVM, 5 active, 0 spare.
md0 is the raid1 on sd*0
md1 is the raid1 on sd*1
md2 is the raid2 on sd*2
During the install, everything seemed to work fine with the formatter, but the installation ended in error. I booted into rescue mode and found that though all the drives were U (in /proc/mdstat), it was resyncing. I let this run (overnight) and the next day, jumped back in and installed the OS successfully.
However, after installing GRUB, when the installation process asked me to reboot, the system came back up with a blank screen (blank, save for a blinking cursor) and didn't move from there. I am thinking that the problem is GRUB, since I can boot into the main LVM partition via the rescue option on the install cd. Here's what bugs me:
[Code]....
Have win 7 on one drive and ubuntu on 2nd drive then son goes and deletes partition that Ubi was in ,now cannot access any system all i get is grub rescue on screen and i cannot boot with any thing taking a guess the grub bootloader has died and made a mess of the windows bootloader.
View 3 Replies View RelatedI tried to update to 2.6.31-20 kernel but I think I messed it up, because when I click on it in the GRUB it starts to load but then it goes back to the dell boot up screen and I have to use the older one in order to get onto ubuntu. Is there anything I can do to fix this?
View 3 Replies View RelatedI dual-boot Windows 7 and Ubuntu. Sometime between 4/18 and a few days ago, something happened with Windows booting up. Ubuntu boots fine, but whenever I try to boot Windows, it just goes to a black screen with a blinking cursor (the command line kind, not a pointer). At first I thought it was Windows, but I have run the repair CD and executed chkdsk /f and chkdsk /r on all partition related to windows. No effect.
I ran a system check designed for issues with booting up, and it found no errors. I have looked at my GRUB files, and they all look fine. I am not sure if it is GRUB or Windows. I tried reinstalling the Windows boot-loader, and it had the same effect, the only difference is that it bypassed GRUB. The reason I think it may be GRUB is that the error happened around the same time as me upgrading from Karmic to the Lucid RC. I have posted this on a Windows 7 forum.
I have just installed Linux on a partition of my hard drive. Computer boots up and gives me the grub boot screen where I can choose from: ubuntu, some memory tests and windows recovery environment (loader). But no Windows Vista. When I boot the windows recovery option the windows boot loading screen comes up but then the screen turns blank but the hard drive is still working and the wifi light also comes on my keyboard. Ubuntu is working completely fine I just need to find a way of getting Grub to display Vista instead of the Recovery environment.
Here is my Boot Info Script: .....
I've recently installed a new graphic card after my old one started to go belly-up and it works nicely in X with twinview. The card have one VGA, one DVI and one HDMI. I have the monitor connected to the VGA and my projector connected to the DVI. However, when I boot the monitor (VGA) don't receive a signal. It is dead until X comes up (and when X comes up it does exactly what I want, it uses the VGA monitor as the main screen).
I had this setup on my old card to and it worked fine. Grub and boot console showed on both screens and I never had to tweak anything to make it do this.
how to enable the VGA outlet, either have boot enabled or only the VGA enabled (either way is fine by me but I really want to see Grub and the boot console on startup).
I've run into a strange problem recently. My primary OS right now is Windows 7, and OpenSUSE is secondary. I had GRUB as the bootloader, and everything seemed fine, but I ran into one problem in Windows 7: one program refused to work correctly with ATI forced anti-aliasing on, but it is needed by others (or else edges look jagged).So I decided to install ATI Tray Tools. But it seems that Windows 7 is being evil and won't let install drivers that their creators didn't pay Microsoft for (thank goodness that's not the case in Linux). That means I had to use a driver overrider program, and that means that it had to change the Windows 7 BCD options. And that's where bootloaders kick in. It seems that Windows 7 is too lazy to check for its BCD on other than active partitions, so it doesn't allow the overrider to function.
So what I did was change GRUB to boot Windows 7 with makeactive flag. The problem now is - it won't deactivate! I no longer get GRUB's boot screen, it just boots to BCD directly. So my question is - is there a way to deactivate (or, rather, reactivate the /boot partition) after Windows 7 shuts down or restarts automatically? Obviously I don't want to use GPartEd each time I want to boot to Linux.
I installed 11.3 as a new install over 10.3, kept the $home and windows partitions, and let it reformat the other two partitions. NO disk partitioning structure was changed.
I did get a warning that GRUB over 128GB might not be able to boot.
I did enable the MBR.
GRUB menu does come up, but upon selection of SUSE 11.3 entry the computer screen blanks, and nothing happens. Selecting Windows does work upon power-up.
I did not have this 128GB issue with 10.3. What are my options? I am really afraid to install 11.3 on production machines now (running 11.2).
I seemed to have crashed my X desktop and I never get a GRUB screen that allows me to boot into recovery. Long story short, I accidentally used metacity --replace (out of habit) when I lost my window decorations. This caused the panel and dash to crash and I couldn't get a terminal. So I forced a reboot and now I boot into a black screen every time. GRUB doesn't even give me my normal recovery mode option. After my BIOS posts it just shows me the purple splash screen then blackness. I have a LiveCD standing by but don't know where to go from there.
View 3 Replies View RelatedI had been using Xubuntu 9.10 successfully for some time. Recently, however, I tried to boot Xubuntu, and instead of reaching the login screen, a "GRUB" interface appeared. The title was "GNU GRUB VERSION 1.97~beta4"
Below that, there were a few instructions describing the use of the Tab key and a blank command line interface beginning with "sh:grub7". Before this started occurring, my computer would turn on and then display a menu to choose the OS. If I selected Xubuntu, a few lines would flash by, and the login screen would appear. My computer is a Dell XPS M1530 laptop. The operating systems installed are Windows Vista Ultimate and Xubuntu 9.10. The Xubuntu was installed using a Wubi installation.
As far as I remember, I did not make any changes that may have caused this. The only significant event that did occur was a power outage, but my computer was not plugged in nor on at this time.
If everything works normally, how would I boot Wubi Xubuntu from the GRUB interface? Are there any other solutions to this problem?
Not a major issue but my Ubuntu boot screen change to the old classic Orange theme after i installed Kubuntu on a different drive and ofcourse a new Grub loader as the Kubuntu installation prompted. It can't be because of the Kubuntu installation but i can't find any other reason for that to happen.
View 3 Replies View RelatedI have just updated to 10.04 on my Dell Insperon 8200 laptop, and all seems well with Linux.My problem is that although it shows in Grub Windows XP will not load. I just get a blank screen with a flashing cursor.I have tried to grub-mkconfig and grub-update, both of which reported successful results.However on reboot I still get a blank screen for windows.This was not an issue with 9.04 and 9.10.so I don't think it is the machine.
View 5 Replies View RelatedI am testing some boot splash screens but the ones I like most are darker and therefore the black font color during boot, well, shows on dark grey or black background, so I can't see.
I would like to change the font color of the messages, but not the results (green=DONE, red=FAILED, etc., I don't want to change that, only the messages like "doing fast boot", "Loading CPUfreq", and all the ones loading stuff, mounting, etc.).
Apparently I need to edit /lib/lsb/init-functions?
I found a few examples on google, mostly for debian based and the ones I have seen are far more complex than the very simple one opensuse uses. So I am stuck here. 11.2 version.
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies View RelatedI am having trouble with the grub boot menu. I have a dual boot system, Windows XP 32 bit and Ubuntu 10.04 64 bit. Windows was preexisting when I installed Ubuntu. The install went fine but when I restarted, the Grub menu gives the option of the Windows boot loader but when I tab to that and press enter the screen goes black and the curser just blinks in the upper left corner...no XP boot. The XP drive is there as I can mount it from Ubuntu side but when I try to boot into it it does not seem to be there. What have I done and what can be done so that I can boot into the XP side?
View 7 Replies View RelatedI installed Win7 after Ubuntu (10.10). I attempted to reload grub so that I would be able to run them dual boot and now I can't load anything.
I followed the guide here: [url] and went threw it a couple of times now to make sure it wasn't user error.
I am using a live cd from 10.04 because it's the only one I have. Any chance that's why it isn't working properly? I wouldn't think so, but I assume that it's possible.
If that is the case; Any way to solve it without using the live cd? I cannot burn a new disk because I have to boot from disk to use my computer right now.
I just get a flashing cursor on a blank screen when I try to load.