Have win 7 on one drive and ubuntu on 2nd drive then son goes and deletes partition that Ubi was in ,now cannot access any system all i get is grub rescue on screen and i cannot boot with any thing taking a guess the grub bootloader has died and made a mess of the windows bootloader.
View 3 RepliesMy system doesn't boot anymore, when I turn on the laptop, instead of the normal grub screen, i get the following:
"error: file not found
Entering rescue mode...
grub rescue> _"
I tried also to make a bootable usb w/ unetbootin but all the distros failed to load w/ a syslinux boot error message so I really need to fix the existing debian installation to get access to my files i need for the university, it's debian stable (6.0.4) on hp mini 210 ....
I am fresh to Ubuntu and am having trouble getting it to boot on my system. I normally run XP, but recently added a second internal hard drive and installed Ubuntu on it. The installation went fine and upon initial reboot I received -
GRUB loading. error: no such disk grub rescue>
I am wondering if there is an issue between two different operating systems upon boot. I am not familiar with GRUB commands.
I previously had Ubuntu installed on my MBR. I deleted that partition (32 GB), resized my Mac partition back up to (250 GB), and then reduced it to 200 GB and created a new one with 50 GB via BootCamp to install Windows 7 from a DVD that I burnt (I got a Windows executable from MSDNAA that I used with Wine to obtain the ISO image. Insert rant about having to download Windows with a Windows executable here.).
I've tried burning two different DVDs. I used Burn on my Mac to burn a data DVD+R with the HFS+ and Joliet filesystems (I think) and then tried again with the ISO9660 and UDF filesystems. The latter has not shown any signs of working besides mounting on OS X. The first DVD would not boot whenever I held 'C' down at time of boot. So I went into BootCamp and clicked "Start Installation". It restarted my computer and this is where the real confusion comes up. I think that it tried booting via the empty partition. The reason I say this is that there are remnants of GRUB and when I boot, I get a screen that says this: error: unknown filesystemrub rescue>
When i boot my PC, i get this in my Fedora 16 distro. I have tried as following but none allowing me to boot anymore.
Grub loading.Welcome to GRUB!
error: file not found. Entering rescue mode...
grub rescue>
grub rescue> ls
(hd0) (hd0,gpt3) (hd0,gpt2) (hd0,gpt1)
grub rescue> ls (hd0,gpt2)/
./ ../ lost+found/ memtest86+-4.20 grub2/ System.map-3.1.0-0.rc3.git0.0.fc16.i686 config 3.1.0.0.rc3.git0.0.fc16.i686 grub/ vmlinuz-3.1.0.0.rc3.git0.0.fc16.i686 elf-memtest86+-4.20 initramfs-3.1.0.0.rc3.git0.0.fc16.i686.img initramfs-3.1.0.0.rc4.git0.0.fc16.i686.img System.mpa-3.1.0.0.rc3.git0.0.fc16.i686 config-3.1.0.0.rc3.git0.0.fc16.i686 vmlinuz-3.1.0.0.rc3.git0.0.fc16.i686
I updated yesterday and now when I start my laptop it goes in to grub rescue mode. I have booted from a 'live cd' and thought I could repair grub from there. In gparted however the partition with ubuntu (sda1) is seen as unknown file system, in terminal when I list the partition table it shows up as FAT16 type. When I try a grub-install it gives this error message:
[Code]....
I was messing around with the partitions and accidentally y deleted the ubuntu partition! I have Windows 7 as a dual boot but I can't access to that OS anymore. The message that I get is: error: no such partition. grub rescue>
View 5 Replies View RelatedI have an hp laptop and i had ubuntu on it for 3 years. my hard drive started to fail a while ago (i had ubuntu 10 on it until 1 week ago) and a then it all went black...I took the laptop to a repair shop, they told me it was the disc, so i bought a new disc, installed it on my laptop and reinstalled the new ubuntu 11. so far so good. i have now a working OS, internet connection and i can in fact type this message.
The thing is: all my files are on the old drive, which doesn't load/boot/start/read anymore. I have tested it on some friends's pc, tried a few HD disgnostic tools, they all send the same message: "fail"
I then tried to mount my old drive (with all my precious files in it) on my laptop as an external drive (usb) hoping that ubuntu 11 could read it as an external usb key: it gets read by the system, but it shows no files at all. it also shows an error message saying the drive can not be mounted, with some "sdb1" thing. i am sorry but i'm really dumb when it comes to tech language.
Then i tried to boot it on start-up but i got the grub rescue> thing and nothing else, just a sad, blinking cursor to recover my files,i have also tried testdisk but couldn't understand very well how to use it, and then photorec, from which i recovered bits and pieces of files, with no name. some of them are just parts some of them are complete.
My problem is: i have to get access to my files, as I use them for work, i couldn't do a back-up recently and i have some real important deadline to meet... for which i need those files. is there any way i could solve the grub issue and have that drive load/mount again as external usb?
I installed ubuntu 10.04 into an external hardrive connected to my windows 7 pc as i wanted a dual boot. The installation went find and ubuntu installed into some free space on the drive. When it rebooted i got the grub rescue screen. I booted into the live CD and ran the boot script
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
[Code].....
I recently partitioned my hard drive so that I could have Linux in addition to Windows Seven on my laptop. For some reason, at boot it it showed not only Linux, a Recovery mode for Linux, and a Windows 7 OS, but also a Windows Vista OS that I never installed. Yesterday, A friend of mine borrowed my computer and chose to open Vista. Since then my computer has been stuck at the grub rescue screen with nothing other than the message: error: no such partition grub rescue>
View 9 Replies View RelatedI've (attempted) to create a quad-boot on my MacBook Pro (if the specs are needed, its- 8gbs RAM, core i7, 500GB hard drive @ 7200 rpms, and its running the latest update of snow leopard). I have installed rEFIt and had installed Windows 7 as well as ubuntu 10.10. Everything was working great until I tried loading Linux Mint 10. Linux Mint got rid of Ubuntu in the rEFIt boot menu. I thought the added Linux Mint partition had just pushed out Ubuntu, so I deleted the Linux Mint partition, and re-sized the Macintosh HD. Now whenever I try to boot Windows 7 or Ubuntu, I get something along the lines of "invalid file system: Grub rescue" What do I do?
View 7 Replies View RelatedI've got Ubuntu 10.04 installed on one partition, and Windows Vista on another. I was messing around with my partitions, and now I can't boot to either one. I just get an error when I boot up on GRUB which says "error: no such partition", and then a prompt saying 'grub rescue>'. I've read up on other people's posts, and they said that I should reinstall GRUB from a livecd, but that doesn't look like it does anything. It seems that GRUB is trying to boot from hd0,8, and that doesn't exist anymore. I can change the 'root' and 'prefix' variables to the right partitions, but the 'boot' or 'chainloader' command doesn't work. You should be able to boot from 'grub rescue>', because that's what it's for, right?
I just want to be able to boot into Ubuntu, not Windows.
PS: Sorry if I'm specifying way too much information(or not enough), I'm fairly new to forums.
Yesterday I made a thread about going back to Windows as I'm giving this laptop to a friend. Anyway, after I finally got Windows to re-install I'm now stuck with "grub rescue" instead of the OS booting. Is there anyone who knows a way I can get rid of grub rescue and get Windows to boot?
View 4 Replies View RelatedI lost power during my Ubuntu update and when I powered back up ubuntu was broken. Now the stupid bit. My hdd was partitioned into 3 bits, vista os, data, and ubuntu. In vista I deleted the ubuntu part and merged it with the data part. Now when I power up my computer it goes straight to a black screen that says...
error : no such partition.
grub rescue> I have looked through the forums for an answer to my problem but to no avail. When I put the ubuntu live cd in and turn back on itjust goes to the same screen. I'm a novice to the world of computers and need any help you can offer.
I installed Ubuntu server with software raid 5 and all went well. Then I figured I should test the raid by these instructions [URL] As a result mdadm would create /dev/md0 with 3 drives and 1 spare. Confused on this matter I just reinstalled Ubuntu. Now, I'm greeted with a grub rescue prompt at boot. Running set displays the correct parameters and ls (md0)/ shows the content of /. However, ls (md0)/boot/ shows no content what-so-ever. If I boot from the livecd there are all the files needed in /boot. I've tried running grub-install on all the drives without results.
View 1 Replies View RelatedMonth or so ago I ran into BusyBox, so while reinstalling Ubuntu 10.04 onto to that first FreeBox HD from a live CD, while manually adding & editing a new partition with free space to put Ubuntu into, I must have accidentally edited pre-existing partitions possibly deleting everything off of that HD. After reinstalling, I went into the terminal & ended up trying to recover or restore the partitions that I thought were lost or deleted or struck sick (since it had BusyBox). But that broke it. Now, after breaking that first HD of mine, when booting, I run into the following at startup:
error: no such partition.
grub rescue>
Right now, I have that first HD as my slave HD I can no longer find this HD, I can't load into it. It might have died because it was making noises the last several weeks. But just yesterday when trying to get into this same first HD from Ubuntu, I'd receive this message:
Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
I have a pc that was running with the latest version of ubuntu and i wanted to install just vista for somereasons.
And what i did is to format the main driver and try to boot it from vista CD and as you may guess i have an error that says: unknown file system grub rescue
Each time i start the pc. I have an ubuntu live cd and also the vista cd, so what should i do now? the vista cd dosnt boot and the same screen appears all the time.
I had to format a partition of my NTFS hard drive using the Disk manager and the next time when I try to boot my computer I get a message Grub rescue.
View 1 Replies View Relatedi have dual booted ubuntu with windows. but after a few days i realized that ubuntu was too slow for my system and then decided to uninstall it and planned on installing it later. So i deleted the partitions on which ubuntu was installed. I rebooted the system and the grub rescue promt appeared, i already knew the work around was to restore the windows MBR using the live cd i used to install ubuntu or the Windows installer. But the main problem is my DVD suddenly stopped working . So my question is, can i boot windows using the promt? is there any commands? or can i uninstall grub using the rescue promt?
My desktop has been down for more that two weeks
Ubuntu version: 10.04
So I had Ubuntu Server installed and I decided to make some new partitions using gparted via a live usb of Ubuntu desktop. And so I think messed up pretty badly. Ubuntu Server won't boot and I get the following error followed by a grub rescue promt:
Code:Diskette drive 0 seek failure
error: file not found grub rescue >
To me, it seems like some boot files may be missing if not the whole system. After I made the partitions, the live USB of Ubuntu was still working fine until I rebooted.So here is the bigger issue, I figured I would just reinstall everything all over again, but instead I can't.
then my computer starts black window opens error: no such partition grub rescue>
[Code]....
I just installed Ubuntu on a computer but it can't boot, it ends with a greb-rescue error.
What shall I do? Here's my fstab and my sudo blkid. I did an ubuntu side installation with xp.
Le FSTAB
# /etc/fstab: static file system information.
# Use 'blkid -o value -s UUID' to print the universally unique identifier for a device; this may be used with UUID= as a more robust way to name devices that works even if disks are added and removed. See fstab(5).
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda5 during installation
UUID=3a307ad3-99a9-4301-8ad0-f601ef9d157c / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=5b3ff501-f07c-4c2e-ac2d-a238b599cbe2 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
SUDO BLKID:
/dev/sda1: LABEL="System" UUID="26AC3F75AC3F3E9D" TYPE="ntfs"
/dev/sda6: UUID="5b3ff501-f07c-4c2e-ac2d-a238b599cbe2" TYPE="swap"
/dev/loop0: TYPE="squashfs"
/dev/sda5: UUID="3a307ad3-99a9-4301-8ad0-f601ef9d157c" TYPE="ext4"
I cant boot from my External HD with ubuntu installed.
I get this message:
error: file not found. grub rescue>
In an attempt to fix this problem, I tried using the following sudo command:
sudo mount /dev/sda5 /mnt
sda5 does not exist, I tried 4, then 3, then 2, and it worked, but that was a partition of my internal HD containing windows 7.
I also typed in:
sudo grub-install --root directory=/mnt /dev/sda
not I get the following error when I try to boot from my internal HD:
error: no such device: 57288a24-5d12-4fb1-b27e-eb09a1f9b7c6. grub rescue>
Is there a way to get grub to boot into windows 7 again?
When I type:
sudo fdisk -l
I receive a list of my drives and their partitions, This is my assumption as to what drive is
Which:
/dev/sda1 = Vista loader, for Windows 7
/dev/sda2 = Windows 7 (At least I hope its still there.)
/dev/sdb1 = Bootable Flash Drive.
/dev/sdc1 = External HD.
The text from the terminal is as follows:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x8da4c52c
Device, Boot, Start, End, Blocks, Id, System.
/dev/sda1, 1, 1355, 10877952, 27, Unknown.
/dev/sda2 *, , 1355, 38914, 301961224, 7, HPFS/NTFS. (The commands changed this from FAT32)
Disk /dev/sda: 8054 MB, 8054636032 bytes
8 heads, 32 sectors/track, 61451 cylinders
Units = cylinders of 256 * 512 = 131072 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier:0x00000000
Device, Boot, Start, End, Blocks, Id, System.
/dev/sdb1, *, 1, 61452, 7865839+, b, W95 FAT32.
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 =8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier:0x0000a613a
Device, Boot, Start, End, Blocks, Id, System.
/dev/sdc1, *, 1, 30402, 244197376, 83, Linux.
Eventually I would like to fix the error I get when I boot from the external, I would like to to boot to ubuntu, but for now I am concerned with getting my internal HD to boot windows 7. Where I originally found the terminal commands to begin with. I think sda5 is where linux was installed in the example I found, and didn't realize it.
So earlier today I was running out of space on my regular Windows 7 partition and I played around with extending it. I ended up somehow deleting grub and messing up my entire system. I've spent the last 2 hours looking for the answer to this and everyone has been saying to boot from a live disk and fix it that way.
Well, I've tried everything, the only way I can boot right now is via USB and it will NOT allow me to. I checked on other computers and even re-installed and formatted by external hard drive to try and get it to work and it refuses. I've changed my BIOS to boot from USB so I have no idea as to why this is happening. Also, I've tried using the "ls" command to find my partition via "ls (hdX,Y)/" and all of them come up as unknown filesystems.
I have grub 1.98 and it boots fine with out my usb hdd connected but brings me to grub rescue when it is.
It takes me to grub rescue and tells me that it cannot find device: "UUID"
This UUID is not even the UUID of the drive that I cannot plug in if I want my computer to boot to grub.
Here is blkid with the usd hdd plugged in after boot:
Code:
/dev/sda1: LABEL="System Reserved" UUID="BA56FD4B56FD0941" TYPE="ntfs"
/dev/sda2: UUID="E23E02D93E02A71F" TYPE="ntfs"
/dev/sda3: UUID="9579da2d-5ba0-407c-a95d-9f134a1417f3" TYPE="ext4"
/dev/sda5: UUID="caefabd7-c8f0-4fca-8005-d682ae939b91" TYPE="swap"
[Code].....
It happened when I updated my php5.4 to 5.5 version on my small Debian 7 server. I am only getting GRUB right after BIOS boot pass, then none of the keys working even C or Shift buttons to go to command promt except CTRL+ALT+DEL.
I have tried rescue mode with live CD, selected myserver/root/ partition to install GRUB but not worked.
How to recover my server, I have some important data in it and I don`t want to destroy them.
I installed Win7 after Ubuntu (10.10). I attempted to reload grub so that I would be able to run them dual boot and now I can't load anything.
I followed the guide here: [url] and went threw it a couple of times now to make sure it wasn't user error.
I am using a live cd from 10.04 because it's the only one I have. Any chance that's why it isn't working properly? I wouldn't think so, but I assume that it's possible.
If that is the case; Any way to solve it without using the live cd? I cannot burn a new disk because I have to boot from disk to use my computer right now.
I just get a flashing cursor on a blank screen when I try to load.
I have a SONY VAIO CW26 laptop. I got a Windows-7 version prepacked with the laptop.I installed Ubuntu Karmic 9.10 over a new partition that i created using the inbuiltfacility in windows7. Both the operatings systems i.e windows7 and ubuntu karmic 9.1 were working nicely.Today i created 2 more partition within the partition inside windows.Once I rebooted after creation of the new partitions my laptop is just showing a black screen with following message.
GRUB loading.
error: unknown filesystem
grub rescue>_
[code]....
I just did a full installation of lucid erasing karmic. installation is completed but when I boot I get grub rescue. I also have WIN7 installed.
View 1 Replies View RelatedFirst time poster and recent Ubuntu adopter. I recently installed 10.10 on my main HD alongside a separate windows (xp) partition (it worked perfectly). Then I decided to get fancy and installed 10.10 to a flash drive directly from a live cd. I attempted to boot from the flash drive, and got a black screen with a blinking underscore for about 10 minutes, then I forcefully rebooted. Now, whenever I attempt to boot at all from my main HD I get "error: no such device and a ton of misc numbers. And the flash drive will not allow me to boot from it. Currently, I'm working within the Live CD.
I have a few projects I need to complete with Dreamweaver inside XP, so recovering it completely would be nice.
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #1 for (,msdos1)/boot/grub.
=> No boot loader is installed in the MBR of /dev/sdf
[Code].....