Ubuntu :: Can't Boot Into Windows After Upgrading
May 2, 2010I just upgraded from ubuntu 9.10 to 10.04. Previously I had windows 7 and ubuntu working side by side. However, now when I try to boot into windows, it says GEOM ERROR.
View 6 RepliesI just upgraded from ubuntu 9.10 to 10.04. Previously I had windows 7 and ubuntu working side by side. However, now when I try to boot into windows, it says GEOM ERROR.
View 6 RepliesI installed Ubuntu 9.10 on Windows 7 system using Ubuntu disk partion option. Unbuntu works great but I can no longer access W7. Windows Loader Boot Option is in normal position as last selection of Grub menu but arrow keys do work. Acts as if keyboard is locked. System defaults to Ubuntu 9.10. How do I select Windows Loader Option
View 9 Replies View RelatedI had ubuntu 10.04 dual boot with win xp and I recently decided to upgrade windows to win 7. Once I did that I could no longer see the grub therefore I couldn't manage to boot into ubuntu. I don't know what to do, the installation is there because I never touched that partition
View 6 Replies View RelatedI don't use Windows that often but thought since I have a copy of Win7 I might upgrade from the XP I'm currently using. I'm anticipating several issues, first Grub, can I get it going again after the Win7 upgrade without messing with my current Ubuntu install? the next issue is Win7 will want to make a "boot" partition, does this create any problem with partition names for Ubuntu? can this be solved by making the windows "primary" partition and using an extended partition inside that? is there anything I'm missing?
View 9 Replies View RelatedI've heard people have been finding that when they upgrade from 9.10 to 10.04 on a machine that dual boots 9.10 and windows 7, they can't boot windows 7 afterwards. There is a fix to this problem but I would rather prevention to a cure.
View 8 Replies View RelatedI am new to Ubuntu. I recently upgraded my Ubuntu from 9.10 to 10.4 (64bit) since then I am unable to dual boot to WIN2K3 from the same HDD as my Ubuntu. I have ran some of the suggestions like: Sudo update grub and Testdisk both did not provide any errors on my partitions and my primary partition displayed in Testdisk was WIN2K3, now when I reboot and select it from the boot menu it just simply show a blinking cursor.
I am out of ideas and I need a solution to suit my configuration. I prefer not to re-install or repair any WIN2K3 OS. Can someone assist and let me know what you need from me to further understand my issue.
I had Ubuntu 9.10 and windows vista on my laptop and both systems boot normally throw grub but after I upgrade to Ubuntu 10.04 LTS windows is shown on the grub loader but if I selected it all I get is blinking cursor, Ubuntu boots just fine.
View 1 Replies View RelatedI upgraded from grub to grub2 recently, and during an update of my system, it ran the update-grub command which prompted a window asking me where to install Grub. Since I didn't know what partition to install it to and the help suggested to install it to all if I was unsure what partition to install it to - I accidentally installed Grub to my Windows partitions (both the regular and the recovery console).
So now, I can't boot into Windows - the computer just hangs after Grub with a blinking cursor and I have to perform a hard reset. Is there any way for me to restore the boot record for the windows partition without having to reinstall windows from the ground up?! I can't use Linux for my webbanking and other important tasks, so (unfortunately) I need Windows back desperately!
I recently installed Debian 7 on a dual boot with Windows Vista. Thus, when I boot the computer, I am prompted by a GRUB screen to select Windows Vista loader, Debian, and Debian (recovery mode). I would like to upgrade Windows Vista to Windows 7. Will this cause an issue with GRUB? Will a Windows 7 loader be added to the list or will a Windows 7 loader replace the Windows Vista loader? Will there have to be a setting change within Debian? Within Windows?
View 6 Replies View RelatedI have a Vista/Kubuntu dualboot, with grub2 as my loader. Because i have read that Windows likes to ignore something else present on the system and overwrite everything with itself. So i installed Vista, then Kubuntu.Now i want to upgrade my Vista to Win7. My question is - what should i do in order to keep my current dualboot intact (Grub2 as a loader, and kubuntu fully functional). I fear Win7 might even never ask me about keeping my kubuntu dualboot, just overwrite everything. PS: My bootinfoscript output
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
I was upgrading our lab's dhcp server to Lucid and it totally died. I have it running on a Debian recovery cd right now. I ran into a bug in gtk which I seem to have fixed, but now I have more serious errors. If I boot without a CD, I get dumped into a busybox shell after the machine fails to boot. From the live CD, I tried dist-upgrading again and it dies trying to build and install rsyslog with a broken pipe error. I am at a loss as to what to do from here short of reinstalling (which is the last option as this server has a lot of custom configs on it)
View 6 Replies View RelatedI am sorry to post another thread regarding this problem, but after searching for hours in this forum and the internet, no suggested solution fixed my problem.I have 3 disks of 1TB in size. The first /dev/sda is where windows 7 64 is installed (partitioning: MBR).The second /dev/sdb is where I installed ubuntu 10.4 64bit (partitioning: GPT).The third is just for storage and is ntfs. No boot here.the grub2 is installed on mbr (/dev/sda)Also did a update-grub just to be sure, and testdisk.Grub finds all the oses and sort the to the list (including windows 7).Upon selecting Ubuntu, ubuntu boots fineBut If I select windows 7, I get a blackscreen and a blinking cursor on top left. No disk activity.I had a similar problem booting windows 7 when I had installed 9.10 in the past. The fix was to add the line:echo insmod part_msdoson the /etc/grub.d/00_header file because grub was inserting only the part_gpt module thus not recognizing the mbr partitions.
This is not a solution anymore.Trying to have a fix at least to boot into windows 7 using the windows disk, using repair, and command prompt as suggested somewhere here on the forum, did not solve anything. On the Repair dialog on start, windows see the installation, I choose fix, and it ends up that there are no problems to fix. After going to console, and issuing The BootRec commands, the /ScanOs and /RebuildBcd, say there are no windows installation. Great work Microsoft!. The installation is found on gui screen, but not on console.I did a clean install from the ubuntu 10.04 cd, just to see if solves the problem. but no. Same thing.And a stupid thing I did on update: I checked to install grub on every disk (just disks not partitions), when grub-config window showed up. Don't ask me why, I ask myself and I don't get an answer.Anyway, as I said, at least ubuntu boots fine and all disks are accessible. So, fortunately no data loss. The windows 7 option available on the grub menu ends up in a blinking cursor.Just in case, here is the results of my boot info script:
---------------------------------------------------------------------
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
I had partitioned my dell inspiron 1525 to have Windows Vista and Ubuntu 9.04. I upgraded Vista to Windows 7. Now whenever I start the computer it goes directly to Windows 7. Is the Grub been deleted? How do I get to my Ubuntu. I have the Ubuntu Live CD with me
View 2 Replies View RelatedI had Vista loaded on my computer, then loaded the BRILLIANT ubuntu onto a second partition! This gave me the GRUB boot loader which is fine.My 2 points are;1. Can I change the position of the items in the GRUB loader so if no keys are pressed it loads Windows automatically?? (Its for my sons computer!!) Also can I edit the GRUB so its less complicated for him??2.I want to update his Windows to Win 7, free upgrade! This over rights the Win partition and will therefore get rid of my GRUB loader. When I have updated how can I get back the ability to chose between booting Win 7 and Ubuntu?? How do I get the GRUB back?
View 3 Replies View RelatedI purchased a Windows 7 upgrade for my PC and plan to do a clean install of 7. I currently dual boot Windows Vista and Ubuntu. I understand when I run the upgrade, it will replace the GRUB Bootloader (Ubuntu Bootloader) with the Windoes Bootloader, when this happens, I won't be able to get back into Ubuntu. How can I correct this issue and reinstall the GRUB Bootloader?
View 3 Replies View RelatedI have 2 HDDs on my computer on one I have Ubuntu and on the other I have Windows XP Home Edition, but after I have done the upgrade on the Ubuntu, windows XP won't boot... even if I disconnect the HDD (power and data) where Ubuntu is installed... it gives me some GRUB ERROR (I didn't try to boot on windows with both HDDs connected as I only have 2 power cables and I need to use my DVD recorder on Windows)
View 8 Replies View RelatedI upgraded to 11.04 and now I get these occasional blank windows. Anyone have an idea on what is going on?
View 1 Replies View RelatedI wanted to use Ubuntu on one of my old laptops (a great, speedy modern OS on a modest hardware PC). Unfortunately this PC can not at the time read all CD-ROM's (can't figure out why it does read some) and I've installed Ubuntu 7.10 - the only CD it did read at the time.
I've used it for two years but I never got my wireless card to work (OK, most of the time it was collecting dust) A couple of days ago I finally realized how to use ndiswrapper (lol...) and I was able to get a working Wi-Fi connection on this laptop. I then proceeded to upgrade it over the internet, to Ubuntu 8.04, then 8.10, then 9.04 and, last night, to 9.10.It has worked through each and every of these updates, but after 9.10 the PC won't even boot (after "GRUB loading...).
I have dual boot my Windows 7 PC with Ubuntu 10.10 recently. Ubuntu boots well until I upgraded the system with Upgrade Manager. Then all of a sudden it won't load anymore.
View 3 Replies View RelatedI upgraded to 11.04 on April 29, and since then my boot time has gone from about 30 seconds to 1'30''. I have tried to disable the splash screen to see what happens, but I just don't have so much background in booting processes.
Code:
The dmesg shows something "strange":
[ 2.489729] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[code]....
I am trying to upgrade to Ubuntu 10.04 and stumbled on a little problem. My partition scheme is as follows and I am installing Ubuntu on an External USB harddrive:
499 GB HARD DISK
WD My Passport 070B
MBR Partition table
49 MB Filesystem --/boot
Linux Ext4 (version1.0)
[Code]...
I have a dual boot (2 hard drive) system, and upgraded to 10.4. Booting into XP results in a flashing cursor that doesn't do anything. I know that GRUB screwed everything up, but I need to know what to do--and assume I don't know what I'm doing--to restore my dual boot ability.
Here's what I get after running a boot info script code...
i was in ubuntu 10.04 and I thought geting the lastest version is the smart thing to do right? so i went to the update manager and upgraded it to 10.10. but now when i restart the computer all I get is " a black screen with white text that says "Gnu Grub Version 1.98+20100804-5ubuntu3Minimal bash - like editing is supported for the first blah blah, Tab lists possible command completions. Anywher else TAB lists possible device or file completions.grub> "I have a dual boot that has Windows 7 and Ubuntu, Ubuntu being my main OS, I really need to get back on it.
View 9 Replies View RelatedI was using Maverick, I performed upgrade to Natty today morning and rebooted and it was working fine. Then I turned off my PC and left home.
Now in the evening when I'm trying to boot nothing happens, just black screen. Nothing happens after that.
Though I can boot by selecting "Previous Version" but can't boot normally. Though I was surprised that even after selecting "previous version" I was booted in to Natty(I guess so, as the UI is Unity not GNOME).
But can't boot using the Kernel that's listed first in my Menu.
my laptop's boot speed has been tremendously dropped (approximately from 30 secs to 3-4 minutes) after I've upgraded from 10.10 to 11.04.What do you recommend me to check in order to get back my lost time?
View 9 Replies View RelatedI had to shutdown the computer while upgrading from Lucid to Maverick as it froze(bug in X11) and then when I start the computer I get kernel panic messages. I used a LiveCD to backup my files and I was wondering if there is a way to log in or reupgrade the Ubuntu in some way from the liveCD.
I don't want to do a fresh install as there are a dozen things I had installed and configured in my system the last 1-2 years.
I've just upgraded my server installation from 9.04 to 9.10. I'm running this as a Xen virtual machine. All seemed to go well until I restarted, at which point I got stuck at this point:
Begin: Running /scripts/init-bottom ...
Done.
mountall:/proc: unable to mount: Device or resource busy
mountall:/proc/self/mountinfo: No such file or directory
[code]...
My service provider is running xen-shell 1.0.79 running on Xen version 3.0.3-1, and after the seemingly-successful do-release-upgrade, uname -r reports ubuntu kernal 2.6.18-5-xen-amd64. Unfortunately, this isn't mentioned as a possible problem here [URL]
I have a Core 2 Duo iMac that I had set up for triple boot using Fedora Core (probably FC8 )and GRUB, Windows XP Pro, and Mac OS X v10.5. Some time ago, I had to blow out and reinstall my Windows installation because it had developed errors, but this also blew out my GRUB, leaving the Fedora install non-bootable. Since I never really used FC on this machine much, I didn't worry.
Lately, I've acquired an hp Mini 110, on which I'm running Linux Mint 8 (Helena), and I'd like to upgrade my FC partition on the iMac to Karmic, but when I run the installer, it won't let me use all of the existing Linux partition, instead wanting to resize it to accommodate both FC and Ubuntu.
How do I make the installer simply replace FC with Karmic, using the entire existing partition? I'm sure earlier versions of Linux that I've used had a simple "erase all Linux partitions and install" option, and the "Manual" option doesn't appear to read the existing partition information (I was too afraid to go any further).
I ended up quitting the installer, which put me into the Live CD environment, where I used the File Browser to "Format..." the Linux partition, but when I went back to the installer, I ran into the same problem, and it didn't seem to matter if I unmounted the existing partitions or not.
I just upgraded to Ubuntu 10.04 from 9.10 and now my Windows XP will not boot from grub. It shows up on the grub boot list but when I select it, all I get is a black screen. It worked perfectly just minutes before the upgrade, but now I cannot use windows, which I need really badly at this point.
View 9 Replies View RelatedDual Boot Problem after Upgrading to 10.04.
View 1 Replies View Related