General :: Error Cannot Find Disk At [hash-code - Looks Like 0ace5f When Booting OpenSUSE 11.2 GNOME-LIVE (64bit)?

Jan 29, 2010

I am in the process of re-DL-ing the ISO as the checksums didn't match.

Mind you, that was with a shell extension in Win-Lose. Who knows.

Anyway:

I have the ISO (that I had previously) on a USB courtesy of UNetBootIn. All appears well until, quite quickly, I receive an error after the loading process which goes something like:

Code:
Error: cannot find disk at [hash-code - looks like 0ace5f etc etc, is about 12 char's in length.]Something very similar (but not same error I think) happened when I tried to do the same with my OpenSolaris or Fedora install. I.e., gets as far as the very beginning of the loader and then: bork.

At least one of them said "will reboot in 120 secs". Saves me the trouble!

View 2 Replies


ADVERTISEMENT

OpenSUSE Install :: Kernel Panic When Booting Live Gnome Or Dvd

Jul 4, 2011

I've currently have opensuse 11.3 installed on my system and I would like to do a new fresh install of opensuse 11.4. I therefore downloaded the DVD 11.4 x64 install. However, when booting the kernel from the DVD (that leads to the installation procedure) I obtain the following error message "unable to handle kernel paging request". The system then stops and I need to perform a hard reset to restart again. The same happens if I try do boot from the live gnome CD. Thus, I'm unable to install opensuse 11.4 at all due to this problem. A possible solution would be to perform a hot update (i.e. changing repositories in my 11.3 and perform a zypper refresh and zypper dup). But I'm a bit scared of doing this since this will install the problematic kernel. how to circumvent this problem ? Is there any updated version of the live CD? I've been able to install opensuse 11.4 x64 without problems at home. Now I'm trying to install it at work. The current kernel (at work) is:

[code]....

View 9 Replies View Related

General :: How To Get Live CD To Start After Booting From Floppy Disk

Nov 18, 2010

I'm an experienced Linux developer who has run into a little problem. I'm using a National Instruments 8170 chassis, among the normal ports, it has a FDD and USB port but this model does not allow booting from a USB CDROM ( I tried a BIOS update, that didn't help either ). I made this cool customized 550MB FC8 LiveCD wtih X, GCC, various apps, etc. and a kernel 2.6.30 & 2.6.18 boot floppy disk with all the needed drivers. The floppy boots to a shell with all the busybox utils, etc. and detects the USB CDROM media and all its files.

My Question is: How do I get the kernel and initrd on the Live CD to start or boot after booting from the Floppy disk ?, I mean, I want to load linux again but this time from the CD after booting linux from floppy, if that makes sense. I'm just using the floppy to boot and recognize the USB CDROM. This can be done with MSDOS and loadlin but loadlin has an issue(it hangs) with the newer kernels (2.6.18 and greater). I searched for the loadlin source code to port it to linux but was unable to find it on the net.

View 1 Replies View Related

OpenSUSE Install :: Installation Progress Stops In 88% / Message Error / Error Copy Live Image To Disk

Oct 12, 2010

Greetings from Greece. I tried to install opensuse 11.3 in an empty disk . Unfortunately the installation progress stops in 88% and the message error says "error copy live image to the disk". I have burn two different cd but the result is always the same.Is it a hardware problem or the cd is not correct?I had the 11.2 version in the same pc without any problem for a long time.

View 9 Replies View Related

Fedora :: Find Checksum Code F11/12 64bit?

Feb 7, 2010

I have downloaded both fedora 11 64bit DVD iso and fedora 12 64 bit live cd,but the install failed on a brand new AMD Athlon II X4. The f11 was polite and said there were errors in the media, but f12 displayed an illegible line of text and stopped. On prior installs there was a obvious checksum value to verify that the download was good So far I have been unable to find one. I'd like to verify that the download is good before I buy more crappy cd's that don't work.

View 2 Replies View Related

General :: Buffer I/O Error While Booting From Backtrack 4.0 Live CD Using Virtual Box

May 28, 2011

I am facing a problem while installing backtrack 4.0 on my virtual box. After assigning a hard drive and booting from the live cd, i am receiving a error message as follows:

Loading, please wait...
Buffer I/O error on device hdc, logical block 76636
(this statement gets repeated like four times with different logical block id.
SQUASHFS error: squashfs_read_data failed to read block 0x5bb337b9
SQUASHFS error: unable to read is index table.

It is not the first time i install operating systems on virtual box though it is the first time i receive such an error with backtrack.

View 1 Replies View Related

Fedora X86/64bit :: Error Before Booting \ Error Message:IOMMU: Mapping Reserved Region Failed?

Feb 20, 2010

I'm a recently proud owner of a new Aspire AS3810T with Fedora 12 installed, when it boots up before entering the boot screen when it loads I see this error message:IOMMU: Mapping reserved region failedHow can i fix this error? It's quite frustrating

View 2 Replies View Related

Programming :: Store Executable Code In The Value Part Of A Hash?

May 28, 2010

I was reading about Ruby code blocks, but it's all a bit hazy.My questions:1. Can you store executable code in the value part of a hash (err...associative array)2. If you did, how would you call the code?3. If you executed this stored code, would it be possible when doing soto pass in an object to the code that it could use?

View 1 Replies View Related

Ubuntu :: Can't Find The Tarball For The GNOME Source Code?

Jun 15, 2011

I want to build my own GNOME. The problem I have is that I cannot find the tarball for the GNOME source code. Another thing I've read on their website is that the way to build it is not the conventional './configure, make, make install', and that it has to be done using a multi-phase process. Is this correct?

View 2 Replies View Related

General :: Booting Live Cd Of Fedora 15 / Change Argument During Booting Mode?

Jun 1, 2011

I am in a situation to boot fedora 15 live cd in to command line mode, not graphical mode, for some testing purpose. how to change argument during booting mode

View 4 Replies View Related

Fedora X86/64bit :: Hash Comparison Gives Different Result When Tested At Prompt Of XP

Jun 16, 2009

I downloaded the ISO image of Fedora x86_64 DVD with Utorrent (bittorrent client). When I tested at the prompt of Xp with sha256sum the hash comparison give a different result that should be expected. Because I downloaded under a torrent client.

View 1 Replies View Related

General :: Unable To Find Medium With Live File System - Error In Ubuntu Installation

Dec 1, 2009

I had been trying to install Ubuntu 9.10 after formatting my machine. When i select install of the welcome screen, the logo blinks for few minutes and then displays a error as

Code:

Unable to find medium with live File System

Then goes to busy box.

"The same thing appears with Ubuntu 8.10, which i was using before!"

View 2 Replies View Related

Fedora :: KDE Live Disk - How To Install Gnome Properly

Apr 29, 2009

I'd like to have both on my system to try out but I don't want to delete my OS to download and install the install DVD. Did I pooch the screw here?

View 2 Replies View Related

Ubuntu :: Booting Usb Live Error?

Oct 25, 2010

my system crashed and so i tried booting from a live usb pen drive. but i get the following error messages (see picture). does this mean that my hard drive is curruped? what can i do? i alreadys tried booting from different live medias, but i cant get anything to run (gparted and system recovery live).

View 1 Replies View Related

OpenSUSE Install :: No Disk Seen When Booting The Disk In Another System?

Jan 2, 2010

My dual proc, dual core Opteron MSI Master2FAR motherboard failed, and I try to boot a disk, used on this board as boot disk, on an Intel based Gigabyte GA-965-DS3. Both systems are x86_64 architecture.

The OS is on both systems is openSUSE 11.1.

On booting the disk on the Gigabyte, the disk is seen correctly by the BIOS, but not by the OS, and there is no /dev/sdX; no /dev/disk/... either. I am taken to a login shell from the ramdisk.

When I just mount this disk on the Gigabyte (booted with the Gigabyte's original boot disk) everything seems fine. No suprise to me, since the disk was fine, and was unmounted gracefully and physically taken off the MSI before the board failed.

I think that the cause lies in the fact that the harddisk controller on the Gigabyte is different from the MSI, and the driver for that controller is not available at boot time.

I have two questions:

- is my assumption correct, or is something else going on?

- if I am right, is there a way to get this disk booting on the Gigabyte (or on another system, for that matter)?

You might want to ask why I want to boot this disk on the Gigabyte in the first place, since I can mount it and see all data on it. I have a reason for that, but telling that story would make this topic too long, and it's too off-topic. Most certainly I will get to that in another topic.

View 2 Replies View Related

Ubuntu Installation :: Error Booting From Any Live CD Or USB?

Oct 28, 2010

i have laptop Toshiba Satellite A500 with Intel i5 processor and Intel Graphics Media Accelerator HD , i am having this problem when booting from any live CD or USB when i choose "run from USB or Live CD " or even "install Ubuntu..." i got large list of error lines (as i think) and after that , no response until i manually switch laptop off. attached two photos and a small video that i could took as it is very quick .

View 5 Replies View Related

Ubuntu :: Error BUG: Int 6: CR2 00000000 / When Booting From Live CD (9.04)?

Aug 6, 2009

I am trying to install Ubuntu 9.04 (Jaunty) on my home PC. I am using the same DVD that i used on my work PC, thus the DVD is not defective. My home PC has the following specs:

Processor: Core 2 Quad, 2.3Ghz
Motherboard: Intel DP43TF
Ram: 2GB
Video: NVidia GeForce 9400GT (1Gig)

When I boot using the Live CD, after i select the "Try Ubuntu" or "Install Ubuntu" options I get a black screen with the following message:

BUG: Int 6: CR2 00000000
EDI 00e7ffff ESI c1fe9d80 EBP c0731f38 ESP c0731f18 EBX ffe80000 EDX 00000006 ECX 00000000 EAX c1fe9d80 err 00000000 EIP c07674f5 CS 00000060 flg 00010092
Stack: c05eebd0 00000010 c07c28f0 00000014 c0731f50 c0740f18 c1fe9594 00000000 00000000 7e3bc000 c0731fc4 c073ede8 7eb1f50d 00000000 00000000 7eb1f50d 00000000 0076350d 00000000 373fe000 1b9ff000 00000000 c0731fd8 373fe000.

I am still new to Linux and am not sure how to proceed from this point on.

View 2 Replies View Related

Fedora X86/64bit :: Same Fortran Code, Different Results For 32 And 64bit System?

Jan 15, 2010

I have the simple fortran codes as:

Code:
integer :: i1=2455121, i2=2455121
real :: s1=0.19123840, s2=0.20749992
real*8 :: a1, a2
a1=i1+s1; a2=i2+s2

[Code]....

When s1 and s2 are stated with 'real*8', the 64bit and 32bit systems get the same results.

View 6 Replies View Related

Ubuntu Installation :: 10.04 Unable To Find Media With Live Disk Image

Jun 27, 2010

I am having trouble both installing or even just booting the live CD. I have to interrupt the boot to give the nomodeset boot option.

Once I get the Ubuntu splash with the oscillating red and white dots for several moments, I get the Busybox with the error message "Unable to find a medium containing a live file system"

If I do a dmesg I then see a lot of sr0 errors. I have an onboard SCSI controller but no scsi devices. I am not sure if this matters.

View 3 Replies View Related

Ubuntu :: Booting The Live-cd From An AMD Athlon And Encountered Fd0 Error On 0

Jan 6, 2010

Personally I have an intel PC which runs Ubuntu 8.04 smoothly. I tried booting the live-cd from an AMD athlon and encounterred the above mentioned message as an error after loading. I went into the bios and disabled the floppy drive as a third booting option as the machine does not have one in it but I still encounter the same problem. I can insert the floppy drive but doubt that would work?

View 1 Replies View Related

Ubuntu Installation :: Failed - Unrecoverable Error When Booting From The 10.04 Live CD - 10.04

Jun 28, 2010

I'm getting the following error when booting from the 10.04 live CD: Installation Failed. The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again.

I checked the CD for defects, and even tried re-downloading/burning to a new disc, but got the same problem. I tried booting in to the LIVE session then installing from the desktop but I still got the same error. I have had 9.10 running on here fine, and after running a Kubuntu 9.10 disc I had to hand to check it would work, that installed fine (hence the auto-partitions you will see in my info dump below). Here is some information about my system, let me know if I've missed anything. I've also included a copy of the syslog below.

[Code]....

View 6 Replies View Related

Ubuntu Installation :: Booting From Live CD Fails - Initramfs Error

Jan 22, 2011

Put together a PC using the following:

Foxconn M61PMP-K AM3 NVIDIA MCP61P Micro ATX AMD Motherboard
AMD Athlon II X2 240 Regor 2.8GHz Socket AM3 65W Dual-Core Processor ADX240OCGQBOX
Patriot 2GB 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10600) Desktop Memory Model PSD32G13332
HITACHI Deskstar 7K1000.C HDS721010CLA332 (0F10383) 1TB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive

Plus an old case and PSU and an old 18gb IDE drive, and an old CD-RW drive

I put the CD in and boot the machine. The initial Ubuntu screen comes up ("Ubuntu" with the line of dots below it) for a few seconds, and then it disappears and I see this text:

(initramfs) mount: mounting /dev/loop0 on //filesystem.squashfs failed: Input/output error
Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on //filesystem.squashfs

At that point it hangs and will proceed no further. I've tried this with the latest Mythbuntu Live CD and the latest Ubuntu Desktop Edition Live CD. Both were x64 versions.

View 1 Replies View Related

OpenSUSE Install :: Dual-Booting 11.3 64bit With Windows 7

Sep 8, 2010

I am currently running windows 7, i would like to be able to dual-boot with openSuse 11.3 64-bit, at the moment I have two seperate partitions each 111gb in size and i wish to install suse onto the D: partition without effecting my windows installation or any data on the c drive.

When i got to the "Discs" stage of the installation i was very confused by this as i am completely new to Linux and dual-booting, i thought it would be a simple case of selecting my d: drive and installing straight to that but i cannot work out how to do this.

View 7 Replies View Related

Ubuntu :: Error - Mounting /dev/disk/by-uuid/[insert Hex Code Here] Failed: Invalid Argument

Mar 18, 2010

I'm running Kubuntu Karmic on my Dell Inspiron laptop - about 200 bug fixes behind because my only available internet is a cellular connection on a crappy wi-fi router - and last night, I suspended it, but it shut down instead. Not a problem, it does this fairly often, figure the RAM gets jostled or something.

But when I go to boot it up, it gets stuck at the pre-loading screen before getting garbled and dropping to the shell, where it says "mount: mounting /dev/disk/by-uuid/[insert hex code here] failed: invalid argument". Of course, mounting /root/sys, /root/dev and /root/proc fails, (directory does not exist) and it gives me the busybox initramfs prompt.

View 6 Replies View Related

Fedora :: IO APIC Resources Couldn't Be Allocated Error When Booting Off FC11 Live CD?

Aug 28, 2009

FC11/KDE-live Cd

The error is below;

apic is getting timing mode sailed. IO apic resources couldn't be allocated

I fed the kernel commands, noapic , noioapic but that didn't work .

View 1 Replies View Related

General :: Error 404 "PHP Code: Object Not Found' - Get PhpMyAdmin Work On LAMP Installed On OpenSuse 10.1?

Apr 24, 2009

get phpMyAdmin work on LAMP installed on OpenSuse 10.1 !!

running: "rpm -q" command result:
apache2-2.2.0-21.7
php5-5.1.2-29.25.3
MySQL5.0.18
phpMyAdmin-2.9.1.1-2.3
webmin-1.360-1

My problem is when trying to connect to: "hxxp://www.m-y-d-o-m-a-i-n.com/phpMyAdmin" I reported Error 404: PHP Code: Object not found! The requested URL was not found on this server. If you entered the URL manually please check your spelling and try again. If you think this is a server error, please contact the webmaster. Error 404

[Code].....

View 1 Replies View Related

General :: Find Out The Serial Number Of Hard Disk Through Command Line On OpenSuse 11.2 ?

Jul 12, 2010

I read this thread but

Code:
anisha@linux-uitj:~> su
Password:

[code]...

View 14 Replies View Related

CentOS 5 :: Error Starting Gnome Settings Daemon - Unknown Return Code 1

May 20, 2011

Getting this error seemingly randomly at login:
There was an error starting the GNOME Settings Daemon.
Some things, such as themes, sounds, or background settings may not work correctly.

The last error message was:
Launch helper exited with unknown return code 1
GNOME will still try to restart the Settings Daemon next time you log in.
I thought I might be logging in to fast, but it happened again when I had waited several minutes.

View 9 Replies View Related

Software :: Verify Hard Disk After Copying Using DCFLDD Utility With MD5 Hash?

Apr 19, 2010

i wrote the following script for copy one source harddisk to 5 destination harddisk simultaneously.

dcfldd if=/dev/sda5 hash=md5 hashwindow=1000M md5log=md5.txt hashconv=after bs=512 conv=noerror,sync of=/dev/sdb of=/dev/sdc of=/dev/sdd of=/dev/sde of=/dev/sdf

after finising to run this command the image was trasfered to all harddirve. But no verfication message. i saw the hash value entry in md5 log. how to check the source and destination clone properly

View 3 Replies View Related

Software :: Grub (Hard Disk Error) How To Rectify From Live CD

Jan 29, 2010

I've a dual installation, ubuntu and XP and I've suddenly got a problem when I boot it gives the error "GRUB: Hard Disk Error", Tried to boot from Ubuntu live CD but I don't know how to correct grub from there. How can I correct the problem, maybe which live disk is better to correct such errors?

Consulted similar threads but couldn't find a solution for my problem as I'm booting from livecd and others were giving solution as if one can directly access the installation on hard disk, but whenever I try with ubuntu livecd it access live installation.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved