When i connect to my laptop a bluetooth usb stick, the bluetooth could not be turned on.
the bluetooth dameon is on, and when i press the turn on button, nothing happens.
in windows the stick works fine.
i have a bluetooth modem (BlueSMiRF) that is connected to Arduino Duemilanove. I am trying to see serial communication messages from the bluetooth modem.
I have Blueman Device Manager that enabled SPP (Serial Port) and it says :
Code:
Serial port connected to /dev/rfcomm0
How do I see the serial communication on this?
I tried on console
Code:
$rfcomm listen 0
but it's stuck at
Code:
Waiting for connection on Channel 1
Is there any other way to listen (and also send) to serial comm msgs on bluetooth?
The bluetooth manager does not detect a bluetooth dongle .trying to use ndiswrapper to fix.I installed device manager and the results are shown below.i downloaded the windows driver suite. It has 4 .exe self extracting driver archives and a setupconfig.ini. The .ini file is below.I was able to extract one of the 32bit archives on a windows machine and it had about 8 .inf files that are titled weird and would not install properly using ndiswrapper probably because im using the 64-bit architecture. there are 2 64bit .exe's in the driver download, but how can i extract them in ubuntu and do i really need to install all 8 .inf files. also do i actually need to make a .inf file? if so how?
Asus - BT211 mini bluetooth dongle
Code: http:[url].... - windows driver under download section.
Device manager
Code:
Model: Unknown model (id =0x3000)
Vendor: atheros Communications, inc[code]....
I run ubuntu 9.10. I recently convinced my wife to give it a shot. The problem is, the bluetooth dongle is detected and the icon appears when its plugged in, the mouse is found and says it is pointing in bluetooth manager but it does not move the cursor on the screen. I have tried 2 different dongles and both work correctly and control the mouse on my asus laptop. She is using a toshiba satelite. Both dongles show up in lsusb as hci0. I've tried everything on the forums and everything I could think of but no go. If she doesn't have use of the mouse for farmville I will be in trouble.
View 1 Replies View RelatedI'm trying to get bluetooth working. I have an ASUS USB-BT211 USB 2.0 Mini Bluetooth Dongle. Where do I find the driver and how do I install it? (Currently when I plug the dongle in, it is ignored.)
lshw shows me this:
Code:
Bus 008 Device 003: ID 0cf3:3002 Atheros Communications, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
[Code].....
Trying to enable bluetooth (internal) on my Acer Aspire One D255. Despite bluetooth issues in general, here is the kicker: Acer decided to combine the fn+F3 key and fn+F2 key into one uber-network key. In windows 7 you hit fn+F3 and you get two options on your screen: enable/disable wireless + enable/disable bluetooth. Not so Ubuntu. I hit fn+F3 and it does various things to my wireless or my bluetooth every 3rd or 4th press. Disabling or enabling both... or neither. Very frustrating.
1) How does one remap the fn+F# keys (one for each)
2) Is there any other bluetooth voodoo for the bluetooth on this machine?
Ubuntu 10.04
Acer Aspire One D255
I'm using fedora 13 x86_64 on amd machine. I use usb bluetooth dongle. The bluetooth service doesn't start at all. When I click on bluetooth icon-preferences-turn bluetooth on, after some time it says, bluetooth is disabled. What should I do to enable bluetooth?
View 1 Replies View RelatedI had Bluetooth PAN network working fine in Lucid. For some reason (mainly hardware) I had to upgrade to Maveric. After that my Bluetooth PAN network stopped working at all. I found out that server host do not even expose any PAN or GN profiles. The only profile it exposes is "Hands-free audio". Setting PAND_ENABLE=1 in '/etc/default/bluetooth' did not have any affect. I attempted to start PAND in listening mode and it exposed PAN profile but any connection was unsuccessful. When I try to connect to any other PAN profile it also had no success with 'Permission denied' message.
View 1 Replies View RelatedI bought a DELL Bluetooth Headset and paired with my laptop running Ubuntu 10.10. I can connect to Audio Sink service on my bluetooth headset and it works but I couldn't connect to Headset service on my bluetooth headset. Bluez daemon quits when I try to connect to Headset service. The same bluetooth headset works fine with my XP. I can connect to Audio Sink and HSP service in my XP.
View 2 Replies View RelatedI have asus 1215n with ubuntu 10.10 (32 bit) and cannot get the bluetooth working
-gnome-bluetooth is installed, saying there's no adapter
-blueman is installed, saying bluez daemon's not running so it cannot work
-bluez is installed, but apparently doesn't work(?)
There's no BT icon anywhere in panels.
It worked with 10.10, but in 11.04 only partially. It would show up in Bluetooth Manager, and I was able to pair with my phone. But after that it always failed to connect. Tried lots of things before I spent $10 on another nameless Chinese one and that worked fine immediately.
View 1 Replies View RelatedI just bought a Bluetooth dongle for my laptop with fedora on it and cannot get the Bluetooth service to start. Tried to do the same on my imac running Fedora and the same thing happened, it said service refreshing and never did.
View 14 Replies View RelatedAfter upgrading F14 -> F15 bluetooth (mouse/keyboard) are not working. With F14 there was no problems.
lsusb gives:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
Decided to upgrade my usb bluetooth dongle because it is slow, old and bulky. Bought a Konig (broadcom) mini dongle. Ubuntu (natty) shows me a bluetooth icon and appears to be working. But: It doesn't find anything, nor can it be found...
lsusb:
Quote:
It looks like there is no module loaded for it. Does there need to be?
lsmod:
Quote:
Recently i install fedora 13 on my dell laptop 1555 , and got to know that the bluetooth of my laptop is not working , when i click turn on bluetooth nothing is happen . u guys share our skill how can make my laptop bluetooth working
View 1 Replies View RelatedI am trying to get my bluetooth adapter to work in RHEL. The adapter is a Kensington Micro (K33902US). The system detects the device, but it fails to find any networks when I do a scan using hcitool. Also, I wrote a small C program to do the same, with the same results (no network found). The bluetooth manager appears in the panel, but when I right-click, the only option I have is to check/uncheck "Discoverable". I have tried restarting bluetooth using "service bluetooth restart" to no avail.I tried borrowing an adapter from a friend (some DLINK) that seemed to work fine for both hcitool and my program. The problem just seems to be in Red Hat's ability to use this particular device.
View 1 Replies View RelatedI have a minimal lucid install to run XBMC with only xinit x11-xserver-utils installed no GUI. I'm trying to get my Logitech Dinovo Edge working via bluetooth. I've install bluez-utils and can do an hcitool dev and see my bluetooth dongle, and I if I use hcitool scan, and press the connect button on my keyboard, the keyboard shows up with it mac address. It won't connect at this point though, so I have to issue a sudo hidd --connec00:11:22:AA:BB:CC and get it to connect.Unfortunately, if I reboot or turn off the keyboard, it doesn't work again without SSHing in and redoing the steps above. Does anyone have an idea to get my keyboard working at startup?
View 2 Replies View Relatedi installed ubuntu 10.10 now im not getting wifi connections and bluetooth also not working
View 2 Replies View RelatedI am leaving my bluetooth MAC out. I can't connect to my phone with bluetooth anymore! obex doesn't work and even when it pairs, it just crashes.Using nautilus I get:
Code:
Could not display "obex://[xx:xx:xx:xx:xx:xx]".
Error: Connection to the device lost
Please select another viewer and try again.
Using the Bluetooth gnome applet:
I select "Browse Files On Device", select the phone once paired, and then nothing happens. I know that it is paired because I can push contact info to the computer. Unfortunately photos and such require I browse the device. This had previously worked on Ubuntu 8.04 LTS before I upgraded to 10.04.
I've just upgraded my Ubuntu installation to 11.04 and my bluetooth mouse (Logitech Bluetooth Laser Travel Mouse) is not correctly recognized at start-up. Every time I restart my computer I have to run the following commands in a terminal
Code:
sudo killall bluetoothd
sudo bluetoothd
and then remove and set up the bluetooth mouse (using an auxiliary USB mouse, of course ) through the bluetooth preferences dialogue.how to carry out the remove/set-up process using a non-interactive shell script?
I installed recently ubuntu 11.04, everything is ok except the bluetooth. When I try to open the bluetooth from the icon it freezes and doesn't do anything.
View 1 Replies View RelatedI have used usb bluetooth with Nokia 2730 and 6300 several months without problems. Last succeeded operation was downloading new ringing sound about 4 weeks ago. When I open connection is OK but When I now try to see folders in cameras it does not work, I'll got message that camera with "mac code" did not response. Cameras show that connection pair is Ok. Reinstalling does not help. Using Ubuntu 9.1, kernel is 2.6.31-20 generic. I have made all updates.
View 3 Replies View RelatedI have a laptop. . .Dell 1150. Ubuntu installed, bluetooth device installed and my bluetooth keyboard and mouse works like a charm. I decided to load up my same exact Ibuntu on my desktop, use the same keyboard on it, and the mouse too. I tested it on the laptop, just in case it would not work in Ibuntu, and I didn't want to wipe out my Windows XP on my desktop and find out Ibuntu would not work on it with a wireless keyboard. Since it worked very well with my laptop, I figured it would work just as good with my desktop. I wiped my desktop out, and installed Ibuntu. Everything worked fantastic. Until I tried to install the bluetooth.
When I plug in my Bluetooth device, Ibuntu finds it and asks to set up your device. I attempt to set up my keyboard/mouse combo and it asks for a 6 digit code (like it is supposed to). I enter the code and press enter. From here, the problem starts. Ubuntu "claims" to connect to the keyboard, shows it connected, but my keyboard does not work at all. Neither does the mouse that is built into the keyboard. I type and nothing happens. This also brings up (sometimes) another message that says my keyboard is trying to connect to the bluetooth device please enter keyboard PIN. Well.
I can't enter anything, because the keyboard does not work! The mouse does not work! I can (without any problems) disconnect and connect to my laptop, but I can't do this to my desktop. Both are dell units. Desktop is about 3 years old, laptop is about 8 years old. Both running Ubuntu, the latest version. Both recognize the bluetooth transceiver. I have tried different USB ports on the desktop with no avail. I would really like to use my desktop as a unit to my TV with a wireless keyboard, not my laptop. It is much faster, more memory, and I can use the TV as a monitor.
I can't get bluetooth working. When I look into the BIOS, I have Bluetooth enabled. It also shows up in the BIOS-menu's hardware-list. So it should be there somewhere.When I search my system for Bluetooth-messages this is what I get:
Code: Select all:~# dmesg |grep -i bluetooth
[ 1062.629616] Bluetooth: Core ver 2.19
[ 1062.629636] Bluetooth: HCI device and connection manager initialized
[ 1062.629646] Bluetooth: HCI socket layer initialized
[ 1062.629805] Bluetooth: L2CAP socket layer initialized
[ 1062.629820] Bluetooth: SCO socket layer initialized
[ 1062.635075] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1062.635077] Bluetooth: BNEP filters: protocol multicast
[ 1062.635082] Bluetooth: BNEP socket layer initialized
[code]....
i am kinda new to fedora. just installed 14 on my hp mini 5102. trying to get bluetooth to work and cannot figure out how. it has built in BT.
View 4 Replies View RelatedBluetooth was working in KDE 4.1 in openSUSE 11.0 with no problems. I install openSUSE 11.1 and now the bluetooth icon that should show up in the system tray no longer shows up. If I hit Ctrl + Esc I can see kbluetooth4 in "System Activity". All that's changed is I did a fresh install (I don't do upgrades) of openSUSE 11.1 with the same KDE I was running in 11.0. I would like to know what's broke even if I can't fix it. I hate not knowing why something isn't doing what it's suppose to be doing.
View 9 Replies View RelatedBluetoothd is running.
bash-4.1# pgrep bluetoothd
25394
But when I start blueman-applet the icon on the toolbar is like white with a red 'x' in the centre of it, which doesn't seem right. I'm using fluxbox as my WM so don't know if that's the reason, but blueman isn't responding when I try to setup the device with gui (blueman-applet). My groups for my user are.
Users wheel floppy audio video cdrom plugdev netdev scanner
Hci0 is up.
bash-4.1# hciconfig
hci0:Type: BR/EDR Bus: USB
BD Address: 11:11:11:11:11:11 ACL MTU: 678:8 SCO MTU: 48:10
UP RUNNING PSCAN
RX bytes:2592 acl:0 sco:0 events:75 errors:0
TX bytes:800 acl:0 sco:0 commands:66 errors:0
I'm trying to use an Apple wireless keyboard with Ubuntu 9.10 (Karmic) but the fn key is not working at all. If I start up xev and hit the fn key it generates no event. What do I need to do for it to work. It seems as if it should work when viewing pages like URL...
View 1 Replies View RelatedI'm working with Ubuntu 10.04 x64 + Asus 1201N + Media-Tech MD1083 RELOADED bluetooth mouse. Gnome Bluetooth Applet has setup mouse perfectly except scrolling. Even back&forward buttons seem to work fine but the scroll wheel does not work at all.
In "xev" I can see that scrolling does not produce any events.
I've paired a bluetooth keyboard and mouse with my machine using the Gnome bluetooth wizard and the keyboard and mouse work fine. Then, if I let the computer sit for a few hours and then try to use the keyboard or mouse, nothing happens. When paired with my windows machine, and I start using the keyboard and mouse after a hour or two, the keyboard takes a second or two to start working again. I suspect that it turns itself off, and then has to reconnect, and that in Linux, the reconnection isn't working properly. I've found other instances on the forums of people with the same symptoms, but never any clear answers. Does anyone know what's going on?
View 1 Replies View Related