Ubuntu :: Bluetooth Mouse Stop Working In Ubuntu 10.10
Oct 14, 2010
Have strange issue after update to Ubuntu 10.10:Mouse buttons (right and center) stop working after using keyboard.After reconnecting nano-receiver mouse start working, but if you start using keyboard - mouse buttons stop working again.Mouse&Keyboard model - A4Tech No any Lag Wireless Desktop GL-6630 (http://www.a4tech.com/product.asp?ci...cid=156&id=600)
Tried to use it on another computer updated to Xubuntu 10.10 - works fine.
View 9 Replies
ADVERTISEMENT
May 4, 2011
I've just upgraded my Ubuntu installation to 11.04 and my bluetooth mouse (Logitech Bluetooth Laser Travel Mouse) is not correctly recognized at start-up. Every time I restart my computer I have to run the following commands in a terminal
Code:
sudo killall bluetoothd
sudo bluetoothd
and then remove and set up the bluetooth mouse (using an auxiliary USB mouse, of course ) through the bluetooth preferences dialogue.how to carry out the remove/set-up process using a non-interactive shell script?
View 6 Replies
View Related
Jul 18, 2011
I have a laptop. . .Dell 1150. Ubuntu installed, bluetooth device installed and my bluetooth keyboard and mouse works like a charm. I decided to load up my same exact Ibuntu on my desktop, use the same keyboard on it, and the mouse too. I tested it on the laptop, just in case it would not work in Ibuntu, and I didn't want to wipe out my Windows XP on my desktop and find out Ibuntu would not work on it with a wireless keyboard. Since it worked very well with my laptop, I figured it would work just as good with my desktop. I wiped my desktop out, and installed Ibuntu. Everything worked fantastic. Until I tried to install the bluetooth.
When I plug in my Bluetooth device, Ibuntu finds it and asks to set up your device. I attempt to set up my keyboard/mouse combo and it asks for a 6 digit code (like it is supposed to). I enter the code and press enter. From here, the problem starts. Ubuntu "claims" to connect to the keyboard, shows it connected, but my keyboard does not work at all. Neither does the mouse that is built into the keyboard. I type and nothing happens. This also brings up (sometimes) another message that says my keyboard is trying to connect to the bluetooth device please enter keyboard PIN. Well.
I can't enter anything, because the keyboard does not work! The mouse does not work! I can (without any problems) disconnect and connect to my laptop, but I can't do this to my desktop. Both are dell units. Desktop is about 3 years old, laptop is about 8 years old. Both running Ubuntu, the latest version. Both recognize the bluetooth transceiver. I have tried different USB ports on the desktop with no avail. I would really like to use my desktop as a unit to my TV with a wireless keyboard, not my laptop. It is much faster, more memory, and I can use the TV as a monitor.
View 2 Replies
View Related
May 27, 2010
I'm working with Ubuntu 10.04 x64 + Asus 1201N + Media-Tech MD1083 RELOADED bluetooth mouse. Gnome Bluetooth Applet has setup mouse perfectly except scrolling. Even back&forward buttons seem to work fine but the scroll wheel does not work at all.
In "xev" I can see that scrolling does not produce any events.
View 2 Replies
View Related
May 28, 2011
I've paired a bluetooth keyboard and mouse with my machine using the Gnome bluetooth wizard and the keyboard and mouse work fine. Then, if I let the computer sit for a few hours and then try to use the keyboard or mouse, nothing happens. When paired with my windows machine, and I start using the keyboard and mouse after a hour or two, the keyboard takes a second or two to start working again. I suspect that it turns itself off, and then has to reconnect, and that in Linux, the reconnection isn't working properly. I've found other instances on the forums of people with the same symptoms, but never any clear answers. Does anyone know what's going on?
View 1 Replies
View Related
Feb 6, 2010
I am running 9.10 (Karmic) on a Compaq Presario CQ60 laptop with Nvidia graphics. I have installed the -185 driver which has solved most problems. However every so often the system seems to lose track of the mouse button state. The first symptom of this is that all mouse movements on text are treated as if the left button is being held down: mouse movement selects text rather than just moving the graphics cursor. I am using a M$ optical mouse.
I have tried:unplugging and replugging the mouse using Ctl-Alt-F1 to go into a console and Ctl-Alt-F7 to go back to the GUI I am able to shut down all of the open windows normally using the keyboard, but the only way I have so far found to get the GUI working again is to reboot the system.
View 3 Replies
View Related
Jun 7, 2010
I was having a problem with the mouse and keyboard randomly failing to work after upgrading to version 10.04. I tried both the 32 and 64 bit versions. The problem went away after I edited the file /etc/default/grub and changed the following line:
from
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
to
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash noapic nolapic"
If you are unable to open a terminal window, try doing the following
Ctrl+Alt+F1
Log into you account.
sudo nano /etc/default/grub
After saving your changes and exiting nano you can reboot by using the halt command.(FYI Ctrl+Alt+F7 gets you back into X server -- but you need to reboot for the change to take effect) Update: problem recurred. I had to do Ctrl+Alt+F1 to log into a console. I executed 'ps aux | more' to find the PID for X.Using the PID I restart X with 'sudo kill -S SIGTERM <PID>'.Once it started up again it was fine.
View 1 Replies
View Related
Jun 1, 2011
After upgrading F14 -> F15 bluetooth (mouse/keyboard) are not working. With F14 there was no problems.
lsusb gives:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
View 7 Replies
View Related
Jan 11, 2010
System was running fine under 8.04 but decided to update. The live CD works fine but after install, the Mouse and Keyboard stop working under 9.10. Even the keyboard power button is off. Disconnecting and reconnecting the keyboard or the mouse does not . AMD Athlon 64 X2 3800+ PS/2 Keyboard and PS/2 mouse
Everything else seems OK but how would I know without the keyboard or mouse. The keyboard turns off right before the first Ubuntu screen. The Numlock will go off and then nothing. Tried to run dpkg - fix broken packages after booting to repair. All I get is fail to fetch http: (whatever )Could not resolve us.archive.ubuntu.com. Update: Alt-F3 ... then Booting to terminal mode does not disable the keyboard.
View 9 Replies
View Related
Mar 15, 2011
whenever I try to hibernate/sleep my computer and I come out of the sleep, the keyboard is not recognized and stops working altogether and requires a reboot. Changing the USB port does nothing either.
View 5 Replies
View Related
Aug 28, 2009
I randomly started up my laptop one day and the mouse and keyboard stopped responding once GDM's login screen came up. Everything works fine from the console, but even if I run startx from the login shell the mouse and keyboard do not work, even though everything else in GNOME runs perfectly.
I am using an HP dv6426us laptop running Ubuntu 9.04 (i686 architecture with the 2.6.28-15-generic kernel). Below is a copy of my xorg.conf file, just in case there might be something wrong with that. I will try and put more information on, but seeing as I have to use a different computer to post this thread, copying over log files and stuff is difficult for the moment (though I am going to try and copy them over to a flash drive).
Code:
Section "Monitor"
Identifier "Configured Monitor"
Endsection
[code]....
View 2 Replies
View Related
Aug 27, 2011
I just install CentOS 5.6 on my computer. My mouse and keyboard stops working in 2 cases: 1. copy files from usb (FAT and NTFS); 2. update my system (specifically, when downloading update packages). But the system's still working. It seems weird but I can do nothing but reboot every time.
View 3 Replies
View Related
Jun 17, 2010
I'm running Fedora 12 on a Shuttle SN78SH7. Updates are all current from the Fedora repositories. I'm using the Nouveau driver for the Shuttle's on-board Nvidia graphics adapter. At random intervals (1 to 5 times per day), my USB keyboard and the buttons on my USB mouse stop working and the desktop freezes (i.e. GKrellm graphical data stops updating, partially painted windows don't complete). However, I can still move the mouse pointer around the desktop. This only seems to happen when I am actually using the computer from the console. It has never happened while the system was turned on, but not being used.
When the mouse and keyboard stop working, I can log in from another computer via ssh. Once the computer gets in this state, the only way to fix things is either to reboot remotely using ssh or to cycle power. I've run low level hardware diagnostics - everything checks out OK. This computer only has USB and firewire inputs. No PS2 jacks.
View 1 Replies
View Related
Dec 18, 2010
Upon logging into kde 4.4 the left mouse button (3 button usb mouse) becomes unresponsive on certain windows. For instance the toolbar may still respond to left-click while other windows on the desktop do not register it. However more and more windows/panels become unresponsive rather quickly. The same happens for right-click sometimes but far less often. Some functionality can be recovered by re-plugging the mouse.
Logging out and logging back in solves the problem until the next reboot. I have tried different users and wiping the .kde and .kde4 folders. The problem persists. I can stil work by relogging every time I turn on my computer but it does waste a lot of time so if there are any ideas I'd apreciate it. KDE 4.4 release 3 (There seems to be no updates in YAST available)
View 1 Replies
View Related
Apr 24, 2010
When i connect to my laptop a bluetooth usb stick, the bluetooth could not be turned on.
the bluetooth dameon is on, and when i press the turn on button, nothing happens.
in windows the stick works fine.
View 1 Replies
View Related
Oct 17, 2010
How to attach dell bluetooth mouse in ubuntu?
View 1 Replies
View Related
Jan 26, 2011
I have an issue with a bluetooth mouse. The mouse connects with the pc normally, and the bluetooth manager reports that the bluetooth device sends data. However, the mouse does not move the pointer, or seems to do any kind of effect on the pc.
View 1 Replies
View Related
Feb 27, 2011
I have a MS bluethooth keyboard/mouse, and a USB bluetooth dongle
In 10.1 I can add both with no problems - but I have to explicitly tell ubuntu to connect to the devices at each machine reboot, which means plugging in a wired mouse first
Does anyone know how I can set the machine to connect automatically at every startup to both my keyboard and my mouse? I found a set of instructions here:
[URL]
But it is from 2007 and I'm not sure its still correct?
View 2 Replies
View Related
Apr 30, 2010
I tried to do a clean install of Ubuntu 10.04, but when I get to the screen if I want to test or install Ubuntu, the keyboard and mouse (bluetooth) don't work. I tried to resync the peripherals, I disconnected usb connector base of the tower and putting it back but nothing works for me. I have a Logitech Desktop MX 5000 (Bluetooth).
View 9 Replies
View Related
Feb 5, 2011
Im using a Samsung R420/R470 laptop with Broadcom bluetooth and a Prolink PMO624B mouse.My mouse works when I add it as a new device, but if I off the mouse and on it again, the mouse does not auto connect. I have to press and hold the connection button under the mouse and reconnect to the mouse.The mouse says that it is linux compatible, so I guess its a problem with my bluetooth drivers.
View 3 Replies
View Related
Mar 21, 2010
i'm using a logitech dinovo keyboard/mouse and was trying to figure out if the device is still in boot mode. I don't see the usb hub listed when i hciconfig and i although the udev rules appear to hid2hci, i cant seem to figure out how in the heck i could be paired when i've never went through the process.. lsusb also shows "boot interface subclass" which im guessing means its in bootmode? Im obviously concerned about this because bootmode isnt encrypted.
[Code]....
View 2 Replies
View Related
Oct 17, 2010
If I use my bluetooth apple Mighty Mouse in a LiveCD of Ubuntu, or in mac OSX, when I next boot linux from disk, the mouse won't connect to it. I do not know if it is something about the mouse that is changing or if it is something on the linux side. This has just happened to me again, and I am sure that the mouse was working before.
View 2 Replies
View Related
Jan 14, 2010
I used a live CD burned onto a DVD-RW and it booted up and worked great. So I installed it using the entire hard drive, Ran Update manager, enabled the driver for the wifi card. Before I was using 10.5 with all recent updates done. A few things don't work. It fails whenever I try to connect my Bluetooth mouse and keyboard, CD drive doesn't mount anything, I thought it would bring up the restricted nvidia driver but it doesn't so the video is slow and sketchy.
View 7 Replies
View Related
May 18, 2010
I've just set up dual boot Win 7 with openSUSE 11.2 but unfortunately I have run into a couple of problems. One of them is that I cannot set up my Bluetooth mouse, which works under windows.
I am typing this from Windows right now (wireless is not working either) so I cannot reproduce the exact steps but anyways, when I try to add a new Bluetooth device it first finds my mouse, and keeps searching, and then removes the mouse from the list, and keeps searching, then it finds it again, ... and it goes endlessly. If I select mouse on the list and click forward on the next screen I get an error saying that the mouse was not set up.
View 4 Replies
View Related
Sep 26, 2010
How do I have Xorg recognize a freshly connected bluetooth mouse after X is already running. It is in my ServerLayout section, but sometimes is not connected at boot.
View 6 Replies
View Related
Feb 19, 2011
I'm running Debian squeeze on a Fujitsu Lifebook AH550 under kernel revision 2.6.37. For the most part, everything is good, but I can't get my Verbatim Bluetooth mouse (model 96991) to work. It's fine with the Debian 2.6.32 kernel, so I know that the hardware is recognized and any required configuration files are in place. I've evidently missed some kernel configuration parameter, unless perhaps some driver has changed since 2.6.32 which renders my mouse incompatible.If I run bluetooth-properties, I can see that a mouse is configured. I've tried removing that device and adding a new device. The mouse is found immediately, and, according to the dialog, is configured successfully.
View 7 Replies
View Related
Oct 3, 2010
I have bluetoothd, hidd, and bluez-simple-agent running. I click my mouse, and bluez-simple-agent never asks to authenticate or for a PIN. Before, bluez was working for me. It broke when I paired my mouse to a LiveCD session of Ubuntu Lucid Lynx.using bluez 4.71
View 3 Replies
View Related
Feb 5, 2010
I just installed 9.10 on my Gateway MD2614U and everything seems to be working but the mouse. Every now and then when i open places and hover over an item it brings it up without me clicking. It does it on other things too.
View 2 Replies
View Related
Aug 3, 2011
I was in 2.6.38.-2-amd64 and it was upgraded to 2.6.39-2-amd64. After the upgrade, every reboot disables the bluetooth mouse. There is a message from the panel with a bluetooth icon
Bluetooth Device
Authorization request from Logitec mouse...
check authorization
I push the buttons on my mouse and the button on the dongle to try and get them to pair, but, the dongle does not work. It is not scanning when I push the connect button.I unplug the usb dongle, and plug it in again, and this time I am able to pair them, and the mouse works. But, I have to do this every time I reboot which is a pain. I found that in the previous kernel, The Bloothtooh package is 4.91-1, but it has been upgrade to 4.91-2. So, this is creating the problem.
View 14 Replies
View Related
Jun 30, 2011
I've installed CentOS 5.6 to my laptop, primarily to use some simulation programs. With much help of google I'm getting my hardware and software to work quite well, but I still have some troubles.My first problem is my Synaptics-Touchpad. It is extremely sensitive and I am not able to scroll. Is there any application which allows me to configure it properly? Before CentOS, I've tried openSUSE 11.4, where there was an application especially for configuring synaptics touchpad (dont't remember the name though). In general, the "feeling" of the touchpad was way much better under openSUSE, but I can't define that properly. I have a bluetooth mouse (Dicota Blue Light) conntected to my laptop, which is working fine except for the scroll wheel, which doesn't work at all. How can I activate it?
View 3 Replies
View Related
