Ubuntu :: Bluetooth Keyboard And Mouse Not Working After Inactivity?
May 28, 2011
I've paired a bluetooth keyboard and mouse with my machine using the Gnome bluetooth wizard and the keyboard and mouse work fine. Then, if I let the computer sit for a few hours and then try to use the keyboard or mouse, nothing happens. When paired with my windows machine, and I start using the keyboard and mouse after a hour or two, the keyboard takes a second or two to start working again. I suspect that it turns itself off, and then has to reconnect, and that in Linux, the reconnection isn't working properly. I've found other instances on the forums of people with the same symptoms, but never any clear answers. Does anyone know what's going on?
View 1 Replies
ADVERTISEMENT
Jul 18, 2011
I have a laptop. . .Dell 1150. Ubuntu installed, bluetooth device installed and my bluetooth keyboard and mouse works like a charm. I decided to load up my same exact Ibuntu on my desktop, use the same keyboard on it, and the mouse too. I tested it on the laptop, just in case it would not work in Ibuntu, and I didn't want to wipe out my Windows XP on my desktop and find out Ibuntu would not work on it with a wireless keyboard. Since it worked very well with my laptop, I figured it would work just as good with my desktop. I wiped my desktop out, and installed Ibuntu. Everything worked fantastic. Until I tried to install the bluetooth.
When I plug in my Bluetooth device, Ibuntu finds it and asks to set up your device. I attempt to set up my keyboard/mouse combo and it asks for a 6 digit code (like it is supposed to). I enter the code and press enter. From here, the problem starts. Ubuntu "claims" to connect to the keyboard, shows it connected, but my keyboard does not work at all. Neither does the mouse that is built into the keyboard. I type and nothing happens. This also brings up (sometimes) another message that says my keyboard is trying to connect to the bluetooth device please enter keyboard PIN. Well.
I can't enter anything, because the keyboard does not work! The mouse does not work! I can (without any problems) disconnect and connect to my laptop, but I can't do this to my desktop. Both are dell units. Desktop is about 3 years old, laptop is about 8 years old. Both running Ubuntu, the latest version. Both recognize the bluetooth transceiver. I have tried different USB ports on the desktop with no avail. I would really like to use my desktop as a unit to my TV with a wireless keyboard, not my laptop. It is much faster, more memory, and I can use the TV as a monitor.
View 2 Replies
View Related
Jun 1, 2011
After upgrading F14 -> F15 bluetooth (mouse/keyboard) are not working. With F14 there was no problems.
lsusb gives:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
View 7 Replies
View Related
Feb 27, 2011
I have a MS bluethooth keyboard/mouse, and a USB bluetooth dongle
In 10.1 I can add both with no problems - but I have to explicitly tell ubuntu to connect to the devices at each machine reboot, which means plugging in a wired mouse first
Does anyone know how I can set the machine to connect automatically at every startup to both my keyboard and my mouse? I found a set of instructions here:
[URL]
But it is from 2007 and I'm not sure its still correct?
View 2 Replies
View Related
Apr 30, 2010
I tried to do a clean install of Ubuntu 10.04, but when I get to the screen if I want to test or install Ubuntu, the keyboard and mouse (bluetooth) don't work. I tried to resync the peripherals, I disconnected usb connector base of the tower and putting it back but nothing works for me. I have a Logitech Desktop MX 5000 (Bluetooth).
View 9 Replies
View Related
Mar 21, 2010
i'm using a logitech dinovo keyboard/mouse and was trying to figure out if the device is still in boot mode. I don't see the usb hub listed when i hciconfig and i although the udev rules appear to hid2hci, i cant seem to figure out how in the heck i could be paired when i've never went through the process.. lsusb also shows "boot interface subclass" which im guessing means its in bootmode? Im obviously concerned about this because bootmode isnt encrypted.
[Code]....
View 2 Replies
View Related
Jan 14, 2010
I used a live CD burned onto a DVD-RW and it booted up and worked great. So I installed it using the entire hard drive, Ran Update manager, enabled the driver for the wifi card. Before I was using 10.5 with all recent updates done. A few things don't work. It fails whenever I try to connect my Bluetooth mouse and keyboard, CD drive doesn't mount anything, I thought it would bring up the restricted nvidia driver but it doesn't so the video is slow and sketchy.
View 7 Replies
View Related
Feb 8, 2010
My bluetooth devices disconnect after a period of inactivity (not sure exactly how long). They're being connected with:
sudo hidd --connect
And I've made no edits to any bluetooth related system files so it should be default settings throughout. I would like them to stay connected indefinitely and it would be even better if they would stay connected through reboots.
View 4 Replies
View Related
May 4, 2011
I've just upgraded my Ubuntu installation to 11.04 and my bluetooth mouse (Logitech Bluetooth Laser Travel Mouse) is not correctly recognized at start-up. Every time I restart my computer I have to run the following commands in a terminal
Code:
sudo killall bluetoothd
sudo bluetoothd
and then remove and set up the bluetooth mouse (using an auxiliary USB mouse, of course ) through the bluetooth preferences dialogue.how to carry out the remove/set-up process using a non-interactive shell script?
View 6 Replies
View Related
May 27, 2010
I'm working with Ubuntu 10.04 x64 + Asus 1201N + Media-Tech MD1083 RELOADED bluetooth mouse. Gnome Bluetooth Applet has setup mouse perfectly except scrolling. Even back&forward buttons seem to work fine but the scroll wheel does not work at all.
In "xev" I can see that scrolling does not produce any events.
View 2 Replies
View Related
Mar 23, 2010
I'm trying to use an Apple wireless keyboard with Ubuntu 9.10 (Karmic) but the fn key is not working at all. If I start up xev and hit the fn key it generates no event. What do I need to do for it to work. It seems as if it should work when viewing pages like URL...
View 1 Replies
View Related
Oct 9, 2010
So my computer was slow with Karmic Koala, so I tried upgrading my build to Lucid Lynx 10.04.
Now I can't login because neither my keyboard nor mouse (and touch-pad) work. However, I can access the command mode (terminal?) though through the grub boot menu.
how I can get my mouse (and touch-pad) and keyboard to work with Ubuntu 10.04? My machine is an Acer Aspire 4730Z. I dual boot with Windows 7, and I'd prefer not to have to clear out the partition for Linux and reinstall.
View 7 Replies
View Related
Nov 5, 2010
I messed up my xorg.conf and tried to put in a clean one, but it doesn't seem to work. I'm not sure what went wrong. When X loads, the mouse cursor is not responding and my keyboard is dead too. I can't toggle to text mode either (Alt-Ctrl-F1).Hope the following files might explain what's wrong./var/log/Xorg.0.log
Code:
[ 26.835] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 26.840] (II) No input driver/identifier specified (ignoring)
[code]....
View 7 Replies
View Related
Feb 12, 2010
I just installed Ubuntu 9.10 on a dell d630 laptop and tried to connect an external ps2 keyboard and mouse using USB connectors to the laptop's USB ports. However, they are not detected by the system.
View 2 Replies
View Related
Jun 7, 2010
I was having a problem with the mouse and keyboard randomly failing to work after upgrading to version 10.04. I tried both the 32 and 64 bit versions. The problem went away after I edited the file /etc/default/grub and changed the following line:
from
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
to
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash noapic nolapic"
If you are unable to open a terminal window, try doing the following
Ctrl+Alt+F1
Log into you account.
sudo nano /etc/default/grub
After saving your changes and exiting nano you can reboot by using the halt command.(FYI Ctrl+Alt+F7 gets you back into X server -- but you need to reboot for the change to take effect) Update: problem recurred. I had to do Ctrl+Alt+F1 to log into a console. I executed 'ps aux | more' to find the PID for X.Using the PID I restart X with 'sudo kill -S SIGTERM <PID>'.Once it started up again it was fine.
View 1 Replies
View Related
Oct 20, 2010
Looking to buy a wireless mouse/keyboard for my wife. Want one of good quality that will work with Ubuntu 10.04 and is in current production. Even better if its a brand that Fry's or Newegg carries.
View 6 Replies
View Related
Jul 15, 2011
I have an Acer 5102 WLMi laptop from 2005 with Ubuntu 9.10 installed. It has worked fine for years but now when I boot up my mouse and keyboard don't respond leaving me stuck at the login screen. I have tried using a USB mouse without sucess. My USB-powered cooling fan still works in all three USB ports fine. I have tried booting into the LiveCD and got the same results except for the CD auto-logging in. Eht0 still auto-connects to the network fine in the LiveCD. I can't find any wrong except for the keyboard and mouse not responding. My next step is to burn a LiveCD with start-up scripts to enable ssh. Also the touch-pad doesn't respond either
View 4 Replies
View Related
Aug 25, 2009
I am running 8.10 64 bit on my laptop and when making a new user I noticed that on my shell prompt, it said "I have no name!". It was bugging me so I logged out and went to log back in. I got some error saying I was logged in for less than 10 seconds after trying a couple times to login. So I restarted and now my mouse and keyboard don't work!
View 1 Replies
View Related
Jan 11, 2010
System was running fine under 8.04 but decided to update. The live CD works fine but after install, the Mouse and Keyboard stop working under 9.10. Even the keyboard power button is off. Disconnecting and reconnecting the keyboard or the mouse does not . AMD Athlon 64 X2 3800+ PS/2 Keyboard and PS/2 mouse
Everything else seems OK but how would I know without the keyboard or mouse. The keyboard turns off right before the first Ubuntu screen. The Numlock will go off and then nothing. Tried to run dpkg - fix broken packages after booting to repair. All I get is fail to fetch http: (whatever )Could not resolve us.archive.ubuntu.com. Update: Alt-F3 ... then Booting to terminal mode does not disable the keyboard.
View 9 Replies
View Related
May 2, 2010
I've just upgraded from karmic to 10.04. After rebooting my system everything seems to work fine except my mouse and keyboard are not working.
since i have a report due for tomorrow and now i have no way of getting in to the system.
View 9 Replies
View Related
Oct 12, 2010
After I updated to 10.10, my ps/2 keyboard and mouse stopped working when in the gnome environment.I have tried to solve this by following the instructions here:
http://ubuntuforums.org/showthread.p...mouse+-working
. . . and by turning off usb legacy in the bios
. . . and by running these commands:
Code:
sudo update-rc.d -f gdm remove
sudo update-rc.d gdm defaults 25[code]..But nothing has worked so far.
View 9 Replies
View Related
Nov 5, 2010
I upgraded to 10.10 from 10.04 few weeks ago. Everything was working fine until today when I did a partial upgrade and it removed some of the lib files. Now my usb mouse and keyboard is not working. I can move the mouse around but can't click ( left or right ). I have nvidia graphics card. I tried running it under safe graphics mode and when I do that everything works fine except for the compiz obviously. I have tried reinstalling nvidia driver to see if that would make a difference but that didn't work either. I am not sure which lib files did ubuntu removed. I have searched everywhere to find a solution on the web and the only thing I think it might b iz my xconf file iz messed up. I really don't want to reinstall the whole OS and loose all my apps.
View 1 Replies
View Related
Jan 24, 2011
I am using 10.10, yesterday I did an upgrade using update manager. After restart, booting stops at login screen, keyboard and mouse is not working. I tried login into recovery mode as well as previous kernel versions nothing is working. I tried to login into single user mode even that is also not working.
View 2 Replies
View Related
Mar 15, 2011
whenever I try to hibernate/sleep my computer and I come out of the sleep, the keyboard is not recognized and stops working altogether and requires a reboot. Changing the USB port does nothing either.
View 5 Replies
View Related
Jun 6, 2009
I'm on a LG E500-VAP36P, with 3gb RAM, 250 Gb SATA HDD (Kubuntu Hardy kernel 2.6.27-9-generic), and my keyboard and my usb mouse don't work at the login screen. My touchpad works and my keyboard works in command-line session. This is my xorg.conf. I also attach a relevant part of my syslog.
Quote:
Section "InputDevice"
Identifier"Generic Keyboard"
Driver"kbd"
[code]....
View 8 Replies
View Related
Jun 11, 2009
I'm having an issue installing Fedora 11. The install goes fine, but after restarting (when I get to the initial configuration screen) my keyboard and mouse don't work. I can boot into the Live CD without issue. My boot.log file is below:
boot.log:
Code:
Welcome to Fedora
Press 'I' to enter interactive startup.
Starting udev: [OK]
Setting hostname Ste-PC: [OK]
mdadm: failed to add /dev/sda1 to /dev/md/imsm0: No such device or address
mdadm: Container /dev/md/imsm0 has been assembled with 2 drives
mdadm: Started /dev/md126 with 2 devices .....
HAL is failing to start, could that be the issue? If so, how should I go about fixing it?
View 14 Replies
View Related
Jun 3, 2011
Ive got a ClearCube Blade server installed with a mirrored clone of a Centos 5.4 system. Running X with GNOME. Upon starting the new blade, i find that I am having issues with the keyboard and mouse. When I plug in USB mouse and keyboard directly into the blade they work fine. When I hook the use mouse and board to the cport kvm, I don't even get any power to the devices. If I plug in ps2 mouse and board through the kvm, I get power and can use them in the bios but once Centos starts to load, they go dead. I have changed the kvm 3 times with new kvms, and I spoke with the manufacturer there are no incompatibilities with the hp mouse or keyboard or any reason why the usb ports wouldn't be working on the kvm for the devices.
View 7 Replies
View Related
Aug 27, 2011
I just install CentOS 5.6 on my computer. My mouse and keyboard stops working in 2 cases: 1. copy files from usb (FAT and NTFS); 2. update my system (specifically, when downloading update packages). But the system's still working. It seems weird but I can do nothing but reboot every time.
View 3 Replies
View Related
Feb 14, 2010
First I tried VNC. Easy install through Ubuntu GUI, but I could only see a still picture of the Ubuntu-desktop that wouldn't update. I could see on the Ubuntu monitor that the cursor was moving and the keyboard did work, but on my Windows computer, the screen didn't refresh. Then I read a bit on the forums and people seemed content with nomachine NX or freenx. After a bit of hazzle I finally managed to get a connection between my Windows and Ubuntu-machine. But the same thing happened here. I get to see a still picture of the Ubuntu desktop, mouse and keyboard working, but the screen doesn't refresh..!
View 1 Replies
View Related
Jun 18, 2010
Upon booting mouse and keyboard work for a short duration, sometimes it works on optimum level though. If I speedily type in my password it will go through and then freeze before logging. This appears to be a known problem in Lucid Lynx I was wondering if there was a fix for a certain update [URL]
View 1 Replies
View Related
