CentOS 5 Hardware :: Configuring The Touchpad And Bluetooth-mouse?
Jun 30, 2011
I've installed CentOS 5.6 to my laptop, primarily to use some simulation programs. With much help of google I'm getting my hardware and software to work quite well, but I still have some troubles.My first problem is my Synaptics-Touchpad. It is extremely sensitive and I am not able to scroll. Is there any application which allows me to configure it properly? Before CentOS, I've tried openSUSE 11.4, where there was an application especially for configuring synaptics touchpad (dont't remember the name though). In general, the "feeling" of the touchpad was way much better under openSUSE, but I can't define that properly. I have a bluetooth mouse (Dicota Blue Light) conntected to my laptop, which is working fine except for the scroll wheel, which doesn't work at all. How can I activate it?
View 3 Replies
ADVERTISEMENT
Jul 31, 2011
I was trying to tweak my video card's performance by configuring the xorg.conf file. There were many lines unrelated to the card there; so, to make the file cleaner, I decided to delete all the sections except the one I was dealing with. Obviously I shouldn't have done that. After rebooting the system, all the hardware that provided human interface stopped working. Now I have to find a way to delete that xorg.conf file. The computer is still connecting to the internet, and I have another computer running Debian available. Is there a way to access the broken computer with the other one?
View 4 Replies
View Related
May 20, 2011
I have a small issue I couldn't find a solution for. I'm running Centos 5.5 on a Fujitsu-Siemens S6120 laptop. When I boot my system and use the touchpad for the first couple of seconds my mouse cursor jumps around the screen sporadically and also mouse buttons "gets pressed" by themselves (without me actually touching them). After 1-2 seconds the situation becomes absolutely normal - mouse moves good and buttons work only when I press them.
Everything repeats after the reboot.
I see the following error in the system log:
psmouse.c: Mouse at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away
It appears right when I try to use the touchpad for the first time, I guess.
The situation isn't critical, but is quite annoying. Is there a way to get it fixed? I searched the Net, but found mostly issues with mouse loosing sync during operation - such thing never happened to me, as my issue appears only once per boot.
View 5 Replies
View Related
May 27, 2011
I have an HP 8460p laptop and have installed Debian(!) Squeeze. The Synaptics TouchPad works, but I am unable to adjust the configuration (primarily pointer speed/acceleration). I have installed package xserver-xorg-input-synaptics according to this Debian wiki page: [URl] My Synaptics device: tyler@titanium:~$ egrep -i 'synap|alps|etps' /proc/bus/input/devices N: Name="ImPS/2 Synaptics TouchPad"
Output from synclient and syndaemon: tyler@titanium:~$ synclient -l Couldn't find synaptics properties. No synaptics driver loaded? tyler@titanium:~$ syndaemon Unable to find a synaptics device. I have tried building /etc/X11/xorg.conf.d/synaptics.conf and restarting but nothing changed: Section "InputClass"
[Code]....
I also examined [URL] and I just couldn't get very far to understand what was wrong, or what I needed to do.
View 2 Replies
View Related
Jun 9, 2011
I am currently running RedHat 6.1 Workstation. The Gnome Bluetooth software does not find my Apple Magic Touchpad. What should I do? I tried scanning by doing "hcitool scan". It did not appear to find it. I am using a USB to Bluestem adapter called D-Link DBT-120.
View 3 Replies
View Related
Jul 9, 2010
I bought an Acer Aspire One Netbook and installed Ubuntu Netbook Remix, but the Touchpad tab in the mouse settings is missing. How do I enable it? I am using Ubuntu 10.04 (Lucid).
View 9 Replies
View Related
Apr 5, 2011
I'm posting from my brand new out of the box HP Pavilion dv6, great machine, but I'm having some hardware issues.My touchscreen isn't working.As well, my touchpad mouse isn't functioning correctly. The left/right click buttons are treated as part of the touch pad, which makes clicking things very difficult. As well, it doesn't appear to have a right click function at all
View 1 Replies
View Related
Jan 30, 2010
My hardware is a Gateway LT2104u netbook.Bought it today, took it out the box and installed the netbook version of Ubuntu.Now here is the problem.The touchpad works fine. I am able to move the mouse all over the screen, the keyboard works find too. The problem is with the mouse click. The clicks are recognized when I am in the 'overview screen'. For example I can click on firefox and it opens. However once firefox is open it does not respond to any clicks. Even clicks to close firefox.
I push Alt+f4 to close the program and then I can click into any other (or the original) programs, but once inside the problem replicates.The problem was present in the 'live cd' during install as well.Does anybody know what might cause this? The whole netbook is useless at this point since I need to click to pretty much do anything in most applications (the Terminal program is one of the few exceptions )
View 1 Replies
View Related
Aug 13, 2010
I've installed Ubuntu 10.4 onto Eee Pc 1015PE.
The mouse touch pad is a pain when your typing.
Is it possible to Disable it whilst I'm typing.
(I saw a post somewhere but it somewhere else but it was not very newbee friendly.)
View 9 Replies
View Related
Oct 29, 2010
I have HP DV6 laptop. when i disable the touchpad, the mouse clicks doesn't respond anymore! and i need to restart the laptop
This happen to me in Ubuntu 10.04 and 10.10
View 5 Replies
View Related
Jul 9, 2011
I am using a acer laptop with ubuntu 10.04
View 2 Replies
View Related
Apr 14, 2014
Debian seems to recognize me touchpad as PS/2 Generic Mouse so tapping works but I don't have touchpad in system preferences and two fingers scrolling doesn't work as well as two fingers zoom. Notebook is Samsung 530u3c. I give you some info about my system down below.
uname -a
Code: Select allLinux debian 3.2.0-4-amd64 #1 SMP Debian 3.2.54-2 x86_64 GNU/Linux
lspciCode: Select all00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
[Code] .....
View 0 Replies
View Related
Jun 23, 2011
I'm running Debian Squeeze on an HP Pavilion dv6-6040ca. The touchpad featured is relatively new, which is likely the root of my problem. The touchpad with its winblows driver features a backlight, two mouse buttons (buttons,not dedicated touchpad space), and an 'on/off' switch/zone in the top left of the touchpad. The touchpad zone works well for pointing, but no gesture support. The touchpad's tap/click feature works way too well, which is very frustrating. The touchpad is detected as a mouse, so there is no option in System->Preferences->Mouse for a touchpad. Both mouse buttons function as expected. The 'on/off' switch/zone does not function, nor does the backlight.
The only feature I really need is the ability to turn off the tap/click feature, as it makes typing a nightmare. It's gotten to the point where I wrote a shell script to toggle the loading/unloading of my psmouse module (which isn't a bad solution, but I don't want my general account having access to modprobe).
Here are some details:
/proc/bus/input/devices
cat /proc/bus/input/devices
I: Bus=0017 Vendor=0001 Product=0001 Version=0100
N: Name="Macintosh mouse button emulation"
[code]....
I'm using the proprietary ATI driver (couldn't do 3D with the open driver), and I'm using a proprietary wireless module for my RaLink wireless adapter.
Passing parameters to the psmouse module
Unloading the psmouse module
Trusting HAL entirely (no xorg)
[code]....
also the xorg input synaptics driver is installed. Now here's the fun part where the obvious things I've overlooked are quickly pointed out to me.
View 9 Replies
View Related
Aug 19, 2011
I've been looking everywhere to find out how to configure my touchpad so I can enable two-finger scrolling and disable-while-typing. I have a fresh installation of Debian Squeeze (I did NOT upgrade from a previous version of Debian, as that seems to cause this problem with some Ubuntu installations). I have the xserver-xorg-input-synaptics driver installed (already reinstalled it to no avail) and the gsynaptics package, which was supposed to add the tab in the mouse preferences but did not (as suggested here: I have a Samsung RF510-S01US if there is something about the touchpad this computer has that is not supported or something. (I know for a fact that this touchpad can handle multi-touch inputs, as it works under Windows 7)
View 2 Replies
View Related
Oct 17, 2010
this issue has been bugging me for years. I want the same capability in Fedora that exists in most recent versions of Windows -- disable the touchpad on my laptop if an external mouse is plugged in. Note that my how-to is a little hardware-specific regarding the actual disabling of the touchpad; I'll discuss that more at the end of the guide.
So, here goes: For my OS (Fedora 13 x86_64) and hardware (Dell Precision M4500) - I needed a specific utility and three scripts. This Dell's trackpad and nipple-stick are seen as an 'internal' PS/2 mouse by Fedora, so I had to install 'xinput' to disable it.
[Code]...
View 4 Replies
View Related
Aug 9, 2010
when I put more than one finger on my touchpad, the mouse starts going all over the screen. There is a video on what it does: [URL] I have Gateway NV53 with 32 bit OS Wubi install 4GB Ram AMD Athlon II X2 M300 CPU (dual core) Multi-Touch Touchpad
View 1 Replies
View Related
Oct 17, 2010
If I use my bluetooth apple Mighty Mouse in a LiveCD of Ubuntu, or in mac OSX, when I next boot linux from disk, the mouse won't connect to it. I do not know if it is something about the mouse that is changing or if it is something on the linux side. This has just happened to me again, and I am sure that the mouse was working before.
View 2 Replies
View Related
Feb 15, 2011
I have a nice new Teac OX-1100 mouse with two extra multimedia buttons that supposedly perform the Zoom functions in Windows. When I try to get the scancodes with "xev", "xbindkeys -k", "showkey", or "showkey
-s" then I see no output. There are some other functional keys on this mouse which also show no output with those tools, such as the side scroll feature.
View 3 Replies
View Related
May 18, 2010
I've just set up dual boot Win 7 with openSUSE 11.2 but unfortunately I have run into a couple of problems. One of them is that I cannot set up my Bluetooth mouse, which works under windows.
I am typing this from Windows right now (wireless is not working either) so I cannot reproduce the exact steps but anyways, when I try to add a new Bluetooth device it first finds my mouse, and keeps searching, and then removes the mouse from the list, and keeps searching, then it finds it again, ... and it goes endlessly. If I select mouse on the list and click forward on the next screen I get an error saying that the mouse was not set up.
View 4 Replies
View Related
Oct 17, 2010
How to attach dell bluetooth mouse in ubuntu?
View 1 Replies
View Related
Jan 26, 2011
I have an issue with a bluetooth mouse. The mouse connects with the pc normally, and the bluetooth manager reports that the bluetooth device sends data. However, the mouse does not move the pointer, or seems to do any kind of effect on the pc.
View 1 Replies
View Related
Feb 27, 2011
I have a MS bluethooth keyboard/mouse, and a USB bluetooth dongle
In 10.1 I can add both with no problems - but I have to explicitly tell ubuntu to connect to the devices at each machine reboot, which means plugging in a wired mouse first
Does anyone know how I can set the machine to connect automatically at every startup to both my keyboard and my mouse? I found a set of instructions here:
[URL]
But it is from 2007 and I'm not sure its still correct?
View 2 Replies
View Related
May 4, 2011
I've just upgraded my Ubuntu installation to 11.04 and my bluetooth mouse (Logitech Bluetooth Laser Travel Mouse) is not correctly recognized at start-up. Every time I restart my computer I have to run the following commands in a terminal
Code:
sudo killall bluetoothd
sudo bluetoothd
and then remove and set up the bluetooth mouse (using an auxiliary USB mouse, of course ) through the bluetooth preferences dialogue.how to carry out the remove/set-up process using a non-interactive shell script?
View 6 Replies
View Related
Sep 26, 2010
How do I have Xorg recognize a freshly connected bluetooth mouse after X is already running. It is in my ServerLayout section, but sometimes is not connected at boot.
View 6 Replies
View Related
Feb 19, 2011
I'm running Debian squeeze on a Fujitsu Lifebook AH550 under kernel revision 2.6.37. For the most part, everything is good, but I can't get my Verbatim Bluetooth mouse (model 96991) to work. It's fine with the Debian 2.6.32 kernel, so I know that the hardware is recognized and any required configuration files are in place. I've evidently missed some kernel configuration parameter, unless perhaps some driver has changed since 2.6.32 which renders my mouse incompatible.If I run bluetooth-properties, I can see that a mouse is configured. I've tried removing that device and adding a new device. The mouse is found immediately, and, according to the dialog, is configured successfully.
View 7 Replies
View Related
Oct 3, 2010
I have bluetoothd, hidd, and bluez-simple-agent running. I click my mouse, and bluez-simple-agent never asks to authenticate or for a PIN. Before, bluez was working for me. It broke when I paired my mouse to a LiveCD session of Ubuntu Lucid Lynx.using bluez 4.71
View 3 Replies
View Related
Jul 18, 2011
I have a laptop. . .Dell 1150. Ubuntu installed, bluetooth device installed and my bluetooth keyboard and mouse works like a charm. I decided to load up my same exact Ibuntu on my desktop, use the same keyboard on it, and the mouse too. I tested it on the laptop, just in case it would not work in Ibuntu, and I didn't want to wipe out my Windows XP on my desktop and find out Ibuntu would not work on it with a wireless keyboard. Since it worked very well with my laptop, I figured it would work just as good with my desktop. I wiped my desktop out, and installed Ibuntu. Everything worked fantastic. Until I tried to install the bluetooth.
When I plug in my Bluetooth device, Ibuntu finds it and asks to set up your device. I attempt to set up my keyboard/mouse combo and it asks for a 6 digit code (like it is supposed to). I enter the code and press enter. From here, the problem starts. Ubuntu "claims" to connect to the keyboard, shows it connected, but my keyboard does not work at all. Neither does the mouse that is built into the keyboard. I type and nothing happens. This also brings up (sometimes) another message that says my keyboard is trying to connect to the bluetooth device please enter keyboard PIN. Well.
I can't enter anything, because the keyboard does not work! The mouse does not work! I can (without any problems) disconnect and connect to my laptop, but I can't do this to my desktop. Both are dell units. Desktop is about 3 years old, laptop is about 8 years old. Both running Ubuntu, the latest version. Both recognize the bluetooth transceiver. I have tried different USB ports on the desktop with no avail. I would really like to use my desktop as a unit to my TV with a wireless keyboard, not my laptop. It is much faster, more memory, and I can use the TV as a monitor.
View 2 Replies
View Related
Aug 23, 2011
i cant get this right for some reason. i switched from ubuntu to fedora. in ubuntu i had the same issue with the touchpad, but there i found a fix which worked with ubuntu, but not with fedora.[URL]... the problem in fedora is that i dont have any psmouse.ko module in /lib/modules/2.6.39.4/kernel/drivers/input/mouse so the patch cant really be applied so i get an error, saying there is no psmouse
i found a fix, but since my knowledge with linux is limited i didnt get it right. "I spent some time trying to get this working (and one will find other threads here, on the Fedora list, etc, where I was trying to get help), but the problem, in the end, is that Fedora doesn't install the PS/2 mouse driver as a module, but builds it into the kernel. So the solution was to recompile the kernel using the changed files from System 76's repo.
This is not nearly as difficult as it sounds. The process described in the Fedora docs, under Building a Custom Kernel, is easy enough to follow. In my case, it was even easier. I unpacked the kernel source by following the steps down through "Prepare the Kernel Source Tree" and then copied the source for the new "module" into drivers/input/mouse, replacing just the elantech.h and elantech.c files. I don't really care about getting an RPM, so I just built the kernel"[URL]..
View 1 Replies
View Related
Aug 3, 2011
I was in 2.6.38.-2-amd64 and it was upgraded to 2.6.39-2-amd64. After the upgrade, every reboot disables the bluetooth mouse. There is a message from the panel with a bluetooth icon
Bluetooth Device
Authorization request from Logitec mouse...
check authorization
I push the buttons on my mouse and the button on the dongle to try and get them to pair, but, the dongle does not work. It is not scanning when I push the connect button.I unplug the usb dongle, and plug it in again, and this time I am able to pair them, and the mouse works. But, I have to do this every time I reboot which is a pain. I found that in the previous kernel, The Bloothtooh package is 4.91-1, but it has been upgrade to 4.91-2. So, this is creating the problem.
View 14 Replies
View Related
Jun 1, 2011
After upgrading F14 -> F15 bluetooth (mouse/keyboard) are not working. With F14 there was no problems.
lsusb gives:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
View 7 Replies
View Related
