I have a MS bluethooth keyboard/mouse, and a USB bluetooth dongle
In 10.1 I can add both with no problems - but I have to explicitly tell ubuntu to connect to the devices at each machine reboot, which means plugging in a wired mouse first
Does anyone know how I can set the machine to connect automatically at every startup to both my keyboard and my mouse? I found a set of instructions here:
[URL]
But it is from 2007 and I'm not sure its still correct?
I have a laptop. . .Dell 1150. Ubuntu installed, bluetooth device installed and my bluetooth keyboard and mouse works like a charm. I decided to load up my same exact Ibuntu on my desktop, use the same keyboard on it, and the mouse too. I tested it on the laptop, just in case it would not work in Ibuntu, and I didn't want to wipe out my Windows XP on my desktop and find out Ibuntu would not work on it with a wireless keyboard. Since it worked very well with my laptop, I figured it would work just as good with my desktop. I wiped my desktop out, and installed Ibuntu. Everything worked fantastic. Until I tried to install the bluetooth.
When I plug in my Bluetooth device, Ibuntu finds it and asks to set up your device. I attempt to set up my keyboard/mouse combo and it asks for a 6 digit code (like it is supposed to). I enter the code and press enter. From here, the problem starts. Ubuntu "claims" to connect to the keyboard, shows it connected, but my keyboard does not work at all. Neither does the mouse that is built into the keyboard. I type and nothing happens. This also brings up (sometimes) another message that says my keyboard is trying to connect to the bluetooth device please enter keyboard PIN. Well.
I can't enter anything, because the keyboard does not work! The mouse does not work! I can (without any problems) disconnect and connect to my laptop, but I can't do this to my desktop. Both are dell units. Desktop is about 3 years old, laptop is about 8 years old. Both running Ubuntu, the latest version. Both recognize the bluetooth transceiver. I have tried different USB ports on the desktop with no avail. I would really like to use my desktop as a unit to my TV with a wireless keyboard, not my laptop. It is much faster, more memory, and I can use the TV as a monitor.
I tried to do a clean install of Ubuntu 10.04, but when I get to the screen if I want to test or install Ubuntu, the keyboard and mouse (bluetooth) don't work. I tried to resync the peripherals, I disconnected usb connector base of the tower and putting it back but nothing works for me. I have a Logitech Desktop MX 5000 (Bluetooth).
I've paired a bluetooth keyboard and mouse with my machine using the Gnome bluetooth wizard and the keyboard and mouse work fine. Then, if I let the computer sit for a few hours and then try to use the keyboard or mouse, nothing happens. When paired with my windows machine, and I start using the keyboard and mouse after a hour or two, the keyboard takes a second or two to start working again. I suspect that it turns itself off, and then has to reconnect, and that in Linux, the reconnection isn't working properly. I've found other instances on the forums of people with the same symptoms, but never any clear answers. Does anyone know what's going on?
i'm using a logitech dinovo keyboard/mouse and was trying to figure out if the device is still in boot mode. I don't see the usb hub listed when i hciconfig and i although the udev rules appear to hid2hci, i cant seem to figure out how in the heck i could be paired when i've never went through the process.. lsusb also shows "boot interface subclass" which im guessing means its in bootmode? Im obviously concerned about this because bootmode isnt encrypted.
After upgrading F14 -> F15 bluetooth (mouse/keyboard) are not working. With F14 there was no problems.
lsusb gives:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
I used a live CD burned onto a DVD-RW and it booted up and worked great. So I installed it using the entire hard drive, Ran Update manager, enabled the driver for the wifi card. Before I was using 10.5 with all recent updates done. A few things don't work. It fails whenever I try to connect my Bluetooth mouse and keyboard, CD drive doesn't mount anything, I thought it would bring up the restricted nvidia driver but it doesn't so the video is slow and sketchy.
When booting up my system today, it got until the login screen, but both keyboard and mouse were inactive. The login window had a triangle (as if to start a video) that I cannot remember having seen before. what is going on and how to get in? I am running Lucid Lynx and KDE.
Sometimes when I reboot, I go to log on only to find that the mouse won't move and the keyboard does nothing. Well, the mouse moves, it's not glued to the desk or anything. But it doesn't move the cursor. The first few times this happened, I found that it was a music player or other USB device plugged in that somehow created confusion or something. So if I unplugged them and booted up again, everything was fine. And by booting up again, I mean I have to hold down the power button and forcibly shut the thing off, since I obviously can't do it the nice way with no mouse or keyboard.
Anyway, it's been doing it now more often, even with nothing plugged into the front USB ports. But I have found that if I disconnect my external hard drive, it boots up fine again. But that's obnoxious, because that hard drive is online as much as the computer itself, because it's my main repository for files. So I have to unplug the USB from the back of it, hold the cable so it doesn't fall behind the desk, turn on the computer, and then log in one-handed while I hold the cable (because if I just plug it back in before the desktop shows, it doesn't mount properly).
And I know it's an Ubuntu thing rather than a general computer thing because the bios options work just fine. In fact, the little NumLock light is on until the moment that Ubuntu starts up and shows the login dialog.
Was running out of room on / and set in Yast to delete /tmp on startup. Also deleted /var/log and /var/tmp while logged in. Rebooted and now mouse and keyboard (both USB) not working. Keyboard works on grub menu. Also works now in XP. Tried reconnecting (sync & plug unplug) different usb ports and nothing. Gave it a few minutes on startup and still nothing. Plugged in a PS2 keyboard and the lights just blink after startup and it will not work either.
im unable to turn bluetooth on at startup, i have to use the applet every time and click enable, any ideas on how to do this via terminal so i can do it on boot?
I am trying to use an Apple BT keyboard with a new installation of 10.04.Using Bluetooth Preferences, I discovered the keyboard, and paired with it. No problem with pairing. If I click on the BT icon in the top panel, it indicates that the keyboard is connected. But any text typed on on keyboard does not appear on screen. I opened Keyboard Settings, thinking that I might have to select the connected BT keyboard as the input device. Nothing there. Is there another preference somewhere that has to be set for the BT keyboard to actually work as an input device (as opposed to simply being paired)? My USB keyboard is still connected (and is working). Perhap Ubuntu only tolerates one keyboard device at a time?
I have an issue with a bluetooth mouse. The mouse connects with the pc normally, and the bluetooth manager reports that the bluetooth device sends data. However, the mouse does not move the pointer, or seems to do any kind of effect on the pc.
I've just upgraded my Ubuntu installation to 11.04 and my bluetooth mouse (Logitech Bluetooth Laser Travel Mouse) is not correctly recognized at start-up. Every time I restart my computer I have to run the following commands in a terminal
Code:
sudo killall bluetoothd sudo bluetoothd
and then remove and set up the bluetooth mouse (using an auxiliary USB mouse, of course ) through the bluetooth preferences dialogue.how to carry out the remove/set-up process using a non-interactive shell script?
I have two machines one Ubuntu Lucid and one Kubuntu Lucid. They share a bluetooth keyboard through a KVM switch. As of last week both were working. At this point my KDE machine disconnects from the keyboard on the first keystroke. The Ubuntu machine is still okay. What I've tried/checked so far without success
I can connect my keyboard through Kbluetooth but it disconnects when I start typing. The timeout time is set to none. I tried rebooting and then reinstalling the software to no avail. I replaced the batteries in the keyboard. Plugging the bluetooth usb adapter directly into the KDE box. Removing and then adding the trust I find this in the syslog:
2010-09-18 12:09:42 godel bluetoothd[1911] link_key_request (sba=00:1BC:0F:F1:E7, dba=00:22:48:87:B3:49) 2010-09-18 12:09:42 godel bluetoothd[1911] Encryption failed: Permission denied(0x5) Here's the kbluetoothrc from my home folder [KBlueLock]
I have a Rocketfish bluetooth keyboard and mouse combo and am running Ubuntu 10.04. The mouse was easy to set up. I just went to the bluetooth icon and clicked add new device and it connected. The same wasn't true for the keyboard. It gives me the code to type so I typed it and pressed enter and... nothing. So I found a little tutorial and I had to install bluez and type in the terminal, "sudo hidd --search" then enter my password (which I needed to grab my other keyboard to do) and it connected. If I don't use it for a while or reboot, the keyboard will not connect. I have to do the hidd search again which means I need to keep my extra keyboard handy. I had it set up before where it would connect on a reboot, but I got a new hard drive and reinstalled Ubuntu, now I can't remember how I set it up. Could I have set up bluez wrong?
I've got a Microsoft Wireless Entertainment Keyboard 7000 that worked fine under Ubuntu 9. The GUI discovers my mouse fine, and also appears to connect to the keyboard, but the keyboard does not type when paired through the GUI. When I pair using hidd (either --search or --connect), the keyboard pairs and works fine, however when I cycle power on the keyboard, it will not auto-reconnect, and I get the following error message associated with it (see attached image):
Grant access to '00001124-0000-1000-8000-00805f9b34fb'Device 'Microsoft Wireless Entertainment Keyboard 7000' (00:12:5A:A1:5A:8D) wants access to the service '00001124-0000-1000-8000-00805f9b34fb'. If i grant access, it does nothing, and will simply request it again when a key is typed. how to make the bluetooth service automatically pair (either through config files, or better yet, through the GUI?)
I'm working with Ubuntu 10.04 x64 + Asus 1201N + Media-Tech MD1083 RELOADED bluetooth mouse. Gnome Bluetooth Applet has setup mouse perfectly except scrolling. Even back&forward buttons seem to work fine but the scroll wheel does not work at all.
In "xev" I can see that scrolling does not produce any events.
Im using a Samsung R420/R470 laptop with Broadcom bluetooth and a Prolink PMO624B mouse.My mouse works when I add it as a new device, but if I off the mouse and on it again, the mouse does not auto connect. I have to press and hold the connection button under the mouse and reconnect to the mouse.The mouse says that it is linux compatible, so I guess its a problem with my bluetooth drivers.
If I use my bluetooth apple Mighty Mouse in a LiveCD of Ubuntu, or in mac OSX, when I next boot linux from disk, the mouse won't connect to it. I do not know if it is something about the mouse that is changing or if it is something on the linux side. This has just happened to me again, and I am sure that the mouse was working before.
I have recently installed Lubuntu 11.04 on an old system. the problem is that it hangs at startup when tries to "Starting Bluetooth". I have searched through this forum and the web and it seems that the problem has something to do with my TV Card. But I can't remove the card because it is a part of my Graphic Card which is an "ATI Radeon 8500DV All In Wonder". I can start the machine with Lubuntu Live CD, and so I thought that maybe I can change a value in a file from installed Lubuntu through Live session that makes the Bluetooth Service disabled at startup.
I have an Acer Travelmate with an external Bluetoothswitch. Everytime I boot Linux Bluetooth is automatically activated. I'm running Kubuntu. How can I disable my Bluetooth so that it doesn't start on Startup?
I am able to pair a rocketfish bluetooth mouse, but I am not able to pair the keyboard. I was wondering if anyone knew the correct pin. Or if anyone knew what I need to do.
I'm trying to use an Apple wireless keyboard with Ubuntu 9.10 (Karmic) but the fn key is not working at all. If I start up xev and hit the fn key it generates no event. What do I need to do for it to work. It seems as if it should work when viewing pages like URL...
I'm using an Apple bluetooth keyboard, model A1016 the one with a white bottom inside clear plastic. The machine is a Mac Mini (2,1) and I also have an Apple bluetooth mouse. The mouse works fine on Ubuntu 10.04. The keyboard has issues.
When I add the keyboard using the bluetooth applet, I find that I can't assign a specified PIN. I have to use automatic PIN, and then type the random number presented. That works until I reboot the machine.
After reboot the bluetooth applet menu shows both the mouse (connected) and the keyboard (not connected). If I tell it to connect the keyboard, nothing happens. The only thing I can do is delete the keyboard, re-add it, with a new random PIN.
I think my computer must be haunted, as I've so far failed at 3 different ways of installing Maverick on my 2007 aluminium imac! I've written off using a VM, and I'm currently stuck trying to make a dual boot setup.
So I've followed the guide at [URL].. and got as far as rebooting with the CD in, and selecting Ubuntu, but then when everything loads I'm left at the screen where I can select try or install, with no way of selecting either as my mouse (apple bluetooth mighty mouse) and keyboard (apple bluetooth wireless aluminium keyboard) don't seem to be connected. I've got past this point by hitting random keys after booting and selecting the CD - this takes me into a more basic looking menu where the keyboard does still work and I can select install, try etc.
So I can get as far as selecting try, and get a working Ubuntu desktop. However, when the desktop loads, my keyboard and mouse are again not working. By connecting a USB keyboard and mouse, I'm able to get my mouse to pair, using the bluetooth menu and going through the setup. However, I'm stuck trying to get my keyboard to pair.
Going into set up new device and searching initially shows up my keyboard, then it disappears. If I wait it randomly comes back and disappears again. If I click on next whilst it is available, I can get as far as putting in a pin, but when I press enter it says Failed..
Sorry for the rambling post - I basically have 2 questions: 1- Is it expected that bluetooth keyboards and mice won't work during the installation menus? Half my problem is that I don't know what should be working and when (should I have to boot into the trial installation and setup the keyboard and mouse, or should it be set up automatically?).
2- Has anyone else seen the same problem with the apple wireless keyboard failing to pair? I've searched the forums and google, and found lots of people with problems with bluetooth keyboards, but none which seem to match what I'm seeing. I don't know if there's any point in pressing on with the installation using the USB keyboard and mouse in the hope that things will work in the full install, or if they don't work in the trial install then thats my lot.
On my Raspberry (I know but I could not get any response in raspberry-forums) running raspian I have a problem with a bluetooth-keyboard.
It has bluez 4.99-2 installed and I was able to pair the keyboard and make it trusted and when I run "bluez-test-input connect <address>" I can use it as an input device, but the problem is that when the keyboard goes into a standby-mode after some inactivity the connection is lost and not reestablished. To make it work again I have to run the bluez-test-input command again.
Now when I use the keyboard on my Android-device it also goes into standby but as soon as I start to type again it automatically reestablishes the connection - this is what I would like to achieve on the Rasperry.
My fundamental problem is that I don't know anything about bluetooth really...
I assume that on Android the keyboard initiates a connection when it comes back from sleep but on Raspbian the connection is initiated from the Pi and when the connection is lost the keyboard may try to reconnect but maybe there is no "bluetooth-server" on the Pi to accept the connection but that is just guesswork from someone that really has no clue...
I've just set up dual boot Win 7 with openSUSE 11.2 but unfortunately I have run into a couple of problems. One of them is that I cannot set up my Bluetooth mouse, which works under windows.
I am typing this from Windows right now (wireless is not working either) so I cannot reproduce the exact steps but anyways, when I try to add a new Bluetooth device it first finds my mouse, and keeps searching, and then removes the mouse from the list, and keeps searching, then it finds it again, ... and it goes endlessly. If I select mouse on the list and click forward on the next screen I get an error saying that the mouse was not set up.
